Doubt user exit

Hi All.
I need to do some validation in VL10.
I found User exits and program for that
User exits: V50R_USEREXIT_PREPARE.
Program: RVV50R10C
How to procedure with this user exits and program.
As my under standing
I need take copy of program from RVV50R10C as Z RVV50R10C.
Shall I need add program ZRVV50R10C in User exits? And where I need to Validation (As my requirement) in User exits V50R_USEREXIT_PREPARE OR in Program ZRVV50R10C?
Please help me.
To be reward all helpful answers.
Regards.
Jay

Hi
No need to copy into Z program
Straight away you write the Code for User exit in the V50R_USEREXITS program by taking the access key from the Basis guys
save and activate and check by keeping a breakpoint.
Regards
Anji

Similar Messages

Doubt user exit ME21N

Hi All.
Automatically I need to Populate Picked quantity in VL02N when I creating STO (delivery will be created after STO in ME21N .it s done through configuration so no need to create delivery by VL10)
I found user exits for ME21N: EXIT_SAPMM06E_013
Include: ZXM06U44,
In my functional spec their given program FV50C302 also. Shall I need to copy as
ZFV50C302 and Include it in ZXM06U44 ?
Picked Quantity should be equal to delivery quantity (Picked Quantity LIPSD-PIKMG = LIPSD-G_LFIMG Delivery Quantity)
Please help me. Automatically how can populate picked quantity to VL02N?
To be reward all helpful answers.
Regards.
Jay

Hi Jay,
For the first question: there is no need to copy FV50C302 and make a Z. Just double click on ZXM06U44, it will show a warning press enter. it will ask for creating the include. create it and pass required value to it.
For the second question: for the pick quantity will be same of delivery quantity, try the exit V50PSTAT, and pass the required value.
Hope it will solve the problem.
Regards
Krishnendu

Doubt in user exit for transaction MM03

Hi Friends,
I have a doubt in user-exits. I have to add a button in MM03 which when clicked should open a particular URL taking material no. as the parameter.I have got the function for opening the URL, I just want to know which user exit should I be calling and in what way?Can anyone please give me step by step procedure as I am new in user exits.Thanks in advance....

VA01 is a dialog program. The use of WRITE statements in dialog program is really not done.
You will need output your values to existing screen fields or create new ones in SE51.
Sounds like you might want to review dialog prog in general.
Also - the TABLES statement is for database tables. It has nothing to do with internal tables.

Doubt in Idoc user exit..............

Hi All,
 i have written the user exit for Sales Order subscreen tab called additional data2 , this tab is provided by sap for developer can write their own user exit coding.
 my doubt is whenever PO comes as an Inbound IDOC i need to pass the value from segment to my user exit fields.
 where can i find the inbound idoc user exit for SO .
 Thanks in advance,
Regards,
Saravanan.

Look at enhancement VEDA0001. It has got quite a few user exits you can use. You will also need to enhance the IDOC for the additional fields you have added on your screen.
Cheers,
Sanjeev

Doubt In VA01 User Exit........

Hi,
we are using sap4.7. In VA01 ( sales Order ) we have a tab called additional data B. where we can write our own user exit coding.
my doubt is where can i find user exit enhancement. i tried in smod t.code but i am not able to find. can any one tell me the enhancement name if you already done.
thank you,
Regards,
Saravanan.

Check out this documentation.....
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
Under user exits>user exits in sales>user exits in sales document processing
Regards,
Rich Heilman

Hi frnds doubt in user exit..

Hi frnds..
i hav to write an exit code as per the req can any pne hlp me regarding this...
User Exit assigned the number ranges for Purchase order ranges allotted for each business area whenever Purchase Department creates purchase order.
looking for ur reply.
with regards,
sahakla

hi rajesh,
Please check this user exits EXIT_SAPMM06E_017 in enhancement MM06E005 (t/code SMOD).
List of user exits for
Transaction Code - ME21 Create Purchase Order

Exit Name Description
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
MM06E011 Activation of PReq Lock
No of Exits: 38
Hope this will help.
Cheers
Alfred
Reward with poinst if it is helpful.

Doubt on user exit

hi experts,
i had google on this but i didnt get proper answer so m posting this so plz give gun shot answer.
what is the differece between USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT.

Hello balaji,
The difference is that any check or change to the document can be done in the PREPARE but once you get to the user-exit SAVE should not change anything only record additional information in the process UPDATE.
I hope you help.

Doubt on User Exit in ME22n

Hi Friends,
I want to create an User Exit to create a Change pointer.
When a change is made to TCode ME22N.
The Change pointer is used to Update EKES Table.
It would be helpfull. If any one can suggest an User Exit Specific to this issue.

Hi Sudhir,
I will suggest you check with this badi ME_PO_PROCESS_CUST .
Regards,
Madhu.

Doubts on user exits

Hi, Could someone help me out with :
1) Specific user exits in SD and MM?
2) What mainly should we know for using user exits while working on SD , MM and FICO modules'?
3)How to find or search for BADI's

3) Goto SE18 and you will be able to get the available BADI's. or
You can debug the GET_CLASS_NAME_BY_INTERFACE method of CL_EXITHANDLER class at runtime.
1) The below program is obtained from some previous posts. You can get the list of exits for a particular transaction.
*& Report ZKB_USER_EXIT_LIST
REPORT zkb_user_exit_list NO STANDARD PAGE HEADING.
TABLES: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : hotspot(30).
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
AT LINE-SELECTION.
GET CURSOR FIELD hotspot.
CHECK hotspot(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM write_list.
* FORM get_data *
FORM get_data.
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
CHECK sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir
      WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir
      WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir
      WHERE pgmid = 'R3TR'
      AND object = 'FUGR'
      AND obj_name EQ enlfdir-area.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = tadir-devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
ENDFORM.                    "get_data
* FORM write_list *
FORM write_list.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt
      WHERE sprsl = sy-langu AND
      name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline,
      2 jtab-obj_name HOTSPOT ON,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ENDFORM.                    "write_list
Regards
Kathirvel

Doubts in abap user exit and coustomer exit

Hi every bady,
Any one knows the different between user exit and coustomer exit please answer my question
with regards,
Sentha

Hi,
Difference between user exits & customer exits:
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
The following links are also useful:
User Exit Vs Customer Exit
coding in user exit in program rffous_t
User exits
User Exits
Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
Check the following links.
For customer exits
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1975d943b111d1896f0000e8322d00/frameset.htm
Difference b/w BADI and user exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
User Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Regards,
Rakesh

Doubt in MIGO user exit

Hi all,
my requirement is "whenever the user is performing the MIGO transaction and presses the post button,i have to populate all the values what ever the user is entering along with the MBLNR (material document number) field and also to populate somemore fields from 2 ztables and post it into IDOCs".
For this i have found the userexit which is MBCF0002.
Im getting all the fields values, what ever the user is entering but for the MBLNR (material document number) field its blank. The reason for this is , only after the successful movement of the material MBLNR field will be generated.
so ,
To be Reward all helpfull answers.
Regards.
Jay

Hi,
You need to use a user exit which is getting triggered only after material document no has been generated. You may use INCLUDE ZXMBCU01 of EXIT_SAPLMBMB_001. Please note that this exit is getting executed whenever a material document is generated by the system. Hence you need to check your specific tran code+reason code. Please also note that if at all you need to debug this exit, just put /h in command box just before pressing post & then settings---->update debugging shystem should give you the message update debugging has been switched on. You need to ensure this since it's a toggle.
I hope this helps,
Regrads
Raju Chitale

Hi doubt regarding user-exits

hi,
how will transfer data in user-exits?
thanku very much ........
surya.

Hi,
Check this,
https://forums.sdn.sap.com/click.jspa?searchID=5794703&messageID=3302505
Thanks.

User exit ZXPADU02 - evaluating SY-UCOMM

Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
 WHEN '0007'.
 CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
 EXPORTING PRELP = INNNN
 IMPORTING PNNNN = P0007.
 CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
 EXPORTING PRELP = PSAVE
 IMPORTING PNNNN = P0007_ALT.
 IF P0007_ALT-SCHKZ <> P0007-SCHKZ
 AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
 AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
 MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
 SHOW_DATA_AGAIN = 'X'.
 ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.

Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
 ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt.

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

Regarding how to find out a program is User Exit/executable

Hi,
Can anybody tell me how can we find wether a particular program is used in executable program (or) user exit program?
One thing we can find out is wether the program type is 'I' or 'R' etc..
Thanks in advance.
Thanks,
Deep.

Hi...
See the following links..
it helps you a lot..
how can we C the USER_EXITS in Z programs
how can we find the list of user exits for a transaction
How to find the active user exits in my client
How to find user exits for a transaction
Hope it helps you...
Let me know if u have any more doubt...
Reward points if useful......
Suresh.......

Doubt user exit

Similar Messages

Maybe you are looking for