Downgrade SQL 2008 R2 Enterprise Cluster to SQL 2008 R2 Standard Cluster
Hi
While I found several information about Downgrading an 2008 R2 Enterprise to 2008 R2 Standard edition (even here in this forum) I didn't found much information doing this when it's a clustered SQL Server. Is there anything I've to be aware of? My solution
I've in mind is:
1.) Stop SQL Service
2.) Move all database (users and system) to another location
3.) Uninstall existing Enterprise nodes/instances of both servers
4.) Install the SQL 2008 R2 Standard on both nodes. Use same folders for databases as in the original installation. Use also all other configs as the original one (instance/cluster name, network ressource name,...)
5.) Stop SQL Service
6.) Remove original user and system databases back to their original folder. Replace system databases of new installation with the original ones.
Should this work or not?
Hi,
I guess you already know it and you are follwoing correct process.But what plans you have for enterprise features which were used in Ent edition and will not be present in standard edition.did you made any alternatives for it.
Did you checked your application code or built in jobs(which used enterprise features) if so good to go then.
For features suported by various edition look at below link
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx
For downgrading this link will be helpful
http://www.mssqltips.com/sqlservertip/3079/downgrade-from-sql-server-enterprise-edition-to-standard-edition/
Please make sure you migrate login and jobs either with script method or use below link
http://support.microsoft.com/kb/918992/en-gb
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Similar Messages
-
Downgrade SQL Server Enterprise 2008 edition to the Developer 2008 edition
Can we downgrade SQL Server Enterprise 2008 edition to the Developer 2008 edition? If yes, then can this be done in-place?
No there is no in-place downgrade.
check these blog -
http://www.mssqltips.com/sqlservertip/3079/downgrade-from-sql-server-enterprise-edition-to-standard-edition/
http://sqlserverstore.blogspot.co.uk/2013/12/how-to-downgrade-sql-server-2008-r2.html
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition
Hello Team,
Is there any issue/conflicts/limitationn to install MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition.
OR their is nothing to worry about it I guess their is memory limitation between both of them. Please suggest
Regards
Naveed AmirHi,
Here you can find the officially Hardware and Software Requirements for SQL Server 2008 R2:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
There should be NO problem as much as I know if the basic limitation fit you (as shanky mentioned).
I had (an clients still have) several servers with Windows Server 2008 R2 Standard & SQL
Server 2008 R2 Enterprise and Standard with no problem (today I have one old developing server with this exact installations work great for several years).
[Personal Site] [Blog] [Facebook] -
How to upgrade SQL 2012 Clustering Enterprise Evaluation to SQL 2012 Clustering Standard Editon
Dear All,
My environment configured 2 Servers for SQL 2012 Clustering Enterprise Evaluation with Active/Passive. Then I Would like to upgrade from SQL 2012 Clustering Enterprise Evaluation to SQL 2012 Clustering Standard Edition with Active/Passive
on same 2 Servers.
I would like you help to share me the step how to upgrade from SQL 2012 Clustering Enterprise Evaluation to SQL 2012 Clustering Standard Edition.
I should upgrade on both Servers or just upgrade only one of them?
I should upgrade on Active node first or passive node first?
During upgrade, I should bring offline resource before upgrade?
I saw only step upgrade evaluation edition on standalone Server but can't find information for upgrade on Cluster environment.
Could you please help provide me the step for do this.Hello,
As per this MS article
http://technet.microsoft.com/en-us/library/ms143393.aspx
Upgrading from Evaluation Enterprise (a free edition) to any of the paid editions is supported for stand-alone installations, but is not supported for clustered installations.
Changing the edition of a SQL Server 2012 failover cluster is limited. The following scenarios are not supported for SQL Server 2012 failover clusters:
SQL Server 2012 Enterprise to SQL Server 2012 Developer, Standard, or Enterprise Evaluation.
SQL Server 2012 Developer to SQL Server 2012 Standard or Enterprise Evaluation.
SQL Server 2012 Standard to SQL Server 2012 Enterprise Evaluation.
SQL Server 2012 Enterprise Evaluation to SQL Server 2012 Standard.
So i think upgrade to Standard edition is not possible on cluster.
What you can do is take full and transaction log backup of All databases.Backup your users and logins and jobs by script method.
Now destroy SQL server 2012 evaluation cluster and create new SQL server standard cluster.
Just FYI( not related to this): You just need to run edition upgrade on a single node, you can choose to run from either an active or passive node. After running, you need to cause a failover to happen. Once the failover happens, all of the nodes along with
the database engine will be updated.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
How to install SQL server 2008 express on Windows server 2008 R2 standard OS
Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
RegdsHello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
I've been searching for HOURS how to resolve this issue:
I am trying to upgrade SQL Server 2008 R2 (Express Edition with advanced services) to SQL SERVER 2014 Standard edition, my first issue was to update the 2008 R2 to Service pack 2 on the first FEATURE RULE TEST, at this time on it's keep saying this:
======================================================================================
Rule Check Result
Rule "SQL Server 2008 R2 Service pack 2 or later is requered for upgrade.: failed.
This SQL Server 2008 R2 features that have been selected to be upgraded to SQL Server 2014 are not at the require service pack. To continue with this upgrade, install SQL Server 2008 Service Pack 2 or lager to the selected instance and the shared features.
=====================================================================================
This is the Configuration Report issue:
Microsoft SQL Server 2014 - System Configuration Check Report
UpgradeFeatureSpecificRules: SQL Server 2014 Setup configuration checks for rules group 'UpgradeFeatureSpecificRules'
KJRTMUpgradeBlockRule
Checks if the currently selected SQL Server 2008 R2 features to upgrade are at the supported service pack. Failed The SQL Server 2008 R2 features that have been selected to be upgraded to SQL Server 2014 are not at the
required service pack. To continue with this upgrade, install SQL Server 2008 Service Pack 2 or later to the selected instance and the shared features.
====================================================================================
I try after hours and finally did install the Upgrade Advisor and got not issues, the last choice I was to uninstall the Management Studio because in other upgrade express versions got blocked, but in this new version of SQL Server 2014 I don't see any way
out!!!
Thanks.Hi again
This is the scenario:
-I have installed the SQL SERVER 2008 R2 With Advanced services (version 10.50.1600.1), and now my guest decide to upgrade to an STARNDARD version which nowadays Microsoft is offering the 2014 version.
-As all IT Support and DBA I try to upgrade to SQL 2014 to check and see with requirements were missing or updates. The first check report only ask to upgrade to SQL SERVER 2008 R2 SP2 (version 10.51.2500.0) which I found in the optional update list and
resolved immediately with the Windows Update service.
-Finally, I realise doing the discovery report (suggested in the last post) is that Windows update only download the service pack 2 for SQL Server 2008 instead of the 2008 R2 (I downloaded manually) then the version was upgrade to 10.52.4000.0
Next time I might download the updates manually and not loosing a lot hours with Windows Update, another point very important is that when SQL Server 2008 R2 is installed, create the Microsoft SQL Server 2008 folder at all programas in the Startup menu:
with the SQL Server Installation Center, but there is not one R2, when you execute this one just show the 2008 installed features.
Now we are on 12.0.2000.8
Thanks anyway and all of you for your interest!!! -
Windows 7 64-bit Pro not connecting to SQL Server on domain Windows Server 2008 R2 Standard
I am upgrading computers from Windows XP Professional to Windows 7 Professional but I have a problem getting one of the stock control software programs we use to connect to our SQL Windows Server 2008 R2 Standard from the new Windows 7 computers.
Our computers are connected to a domain and so is the SQL Server. The Windows XP computers allows each standard domain user to log on and connect to the SQL Server via the stock control software program.
But on the Windows 7 Pro computers standard domain users can't connect to the SQL Server but the domain administrator accounts on the same Windows 7 Pro computers can connect to the SQL Server via the stock control program.
I have setup the server alias, server name and port number via the SQL Server Client Network Utility (cliconfg.exe) so I know this isn't the problem as it works when I am logged on as domain administrator.
It seems to be something to do with domain user permissions and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that doesn't allow standard domain users to connect to an SQL Server. But I can't find anything about this and
can't workout how to fix it except to make all the users domain administrators which is obviously not a good thing to do. So basically I I think I need to create a group policy that allows the users to connect to the SQL Server but I have no experience doing
this and don't know where to begin.
Thanks for all you guys help and I hope someone can provide me with the solution to this problem.Hi,
Was there any message?
Please run the stock control software as Administrator to check if it was caused by UAC.
If it could run as administrator, please add the standard domain user to local administrator.
Karen Hu
TechNet Community Support -
I can't seem to find any clear answers to the implications of installing SQL Server 2012 standard edition vs. enterprise in regards to SharePoint 2013.
I understand that to get many of the features you need Enterprise edition of SQL 2012; but, what I can't figure out is if the backend SharePoint SQL 2012 is standard; but, the PowerPivot/SSRS server is Enterprise will we still get the features?
If we have 3 tier SharePoint farm, one of those tiers is for the SQL Server database backend. If that SQL instance is 2012 standard and we add another server to the farm w/ SQL 2012 Enterprise to handle the tabular models, PowerPivot, and SSRS in integrated
mode will we still get the features?
Or, can we (should we) install Enterprise 2012 as the SharePoint database backend and let that instance triple down as also the PowerPivot and SSRS instance?
The Degenerate DimensionHi MMilligan,
SQL Server 2012 Standard is not supported PowePivot for SharePoint . In addition, SQL Server 2012 Standard is also not support some Reporting Services Features.
For more information, please refer to Features Supported by the Editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/cc645993.aspx.
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://msdn.microsoft.com/en-us/library/jj218795.aspx.
If you have any problem, please feel free to let me know.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support -
Want to Buy SQL 2008/2012 standard edition to achieve Database failover
Hi Team,
We want to know exact part code details to procure 2 nos Sql 2008/2012 standard edition server to installed on "Window 2012 R2 Standard Edition, Factory installed, no media, 2 socket,2 VMs, No client" Server.
I have Access control system application (Main-Standby) on which we need Automatic database failover by using SQL Standard server. Application vendor has suggested us to procure 2 nos of Microsoft Sql 2008/2012 standard edition server.
If possible then please let me know exact part code details of Sql 2008 and 2012 standard edition server which doesn't have any issue to installed on above said server edition.
Thanks,
VishalHi Vishal,
Unfortunately, we do not deal with part codes, I request you to check the below link as this is not the correct forum.
http://www.microsoft.com/en-in/server-cloud/products/sql-server/Support.aspx
Perhaps you could post you question on the SQL forum :
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Mekh. -
Data Retrieval from SSRS 2008 R2 to SQL Server 2012 standard
Hello,
We have a virtual machine running SSRS 2008 R2 and a physical server running SQL server 2012 standard. We are having an issue with a report that is taking almost 10 minutes for the data to be retrieved from the sql 2012 database. We used the
execution logging query to debug and analyze. We see that it renders and processes very fast, but the data retrieval time is very slow. When the same query is run using sql studio mgr. from the SSRS server it runs just fine...it
takes seconds for the results to come up.
I don't believe there is a compatibilty issue because other reports run fine. We're just having problems with one report.A long shot, but I've seen where the data type of a report parameter is mismatched against the data type of the table it is being compared against. SQL profiler would show this clearly.
This would explain why the query returns quickly in ssms but not with the report. -
Hello there,
Pl. provide solution on this on urgent if possible
REATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 10240 MB per database.
I have installed MS SQL 2008 R2 Standard Edition
Error getting while restoring sql db 11gb backup file
YogiHi,
Please post output of query provided by Olaf. I guess you have connected to Express edition( 2008 r2/2012/2014) and since database has limitation of 10 G hence you got this message. Please double check
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2
Hello,
We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
Where can this come from? If it is hardware related what are the thing I should look at?
Thanks allHello,
Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
2008 R2 compatible with the newer operating system, as explained on the following post.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
https://support.microsoft.com/en-us/kb/955392/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hello,
Can you replicate databases from SQL Server 2014 Enterprise Edition to SQL Server 2014 Standard edition?
Thanks.Yes, you can replicate from Enterprise edition to Standard edition. The only caveat is Peer-to-Peer Replication requires all nodes to be Enterprise Edition.
Brandon Williams (blog |
linkedin) -
Issues enabling AlwaysON in SQL Server 2014 Standard
Hi
I am trying to configure AlwaysOn and having issues enabling in SQL Server configuration manager
OS : Windows Server 2012 R2
SQL : SQL Server 2014 Standard Edition
Here is what i see in config manager :
The AlwaysOn Availability Groups feature requires the x86(non-Wow) or x64 Enterprise Edition of SQL Server 2012 (or later version) running on Windows Server 2008 (or later version) with WSFC hotfix KB 2494036 installed. This SQL Server edition and/or Windows
Server system do not meet one or more of these requirements.
I patched both the nodes and ran the cluster validation as well which didn't report any missing patches. Couldn't find any documentation/solution for this.
Can someone please help me with this ???Thanks.
Is the configuration of Always on FCI is same as Traditional WSFC ?
Yes just think of it as a regular clustered sql instance
An FCI is a single instance of SQL Server that is installed across Windows Server Failover Clustering (WSFC) nodes
and, possibly, across multiple subnets.
https://msdn.microsoft.com/en-us/library/ms189134(v=sql.110).aspx
Maybe you are looking for
-
My weather app doesn't show the feels like temp or wind, etc. How can I fix this? I am running iOS 8.1.2.
-
I have installed Russian fonts on my IBM PC, but the characters are displayed as jibberish. The Russian language option does not appear in the Paragraph Designer > Language drop down menu. How do I resolve this issue? I am using FrameMaker 9. Thanks
-
Has anyone had issues with battery overheats on the HP tablets?
Seen many messages on battery drains (not sure what the solution is to that) but have an overheating situation when in power down mode.
-
Mac Pro Fan runs at full speed!!!!!
Just set-up my new 2.66 Mac Pro.....added an additional WD Raptor 10k rpm drive and was psyched to use my new heavy iron. I was shocked at how loud the fan noise was!!!!! Upon initial boot it ran full speed (louder than my old 2.7 Dual PowerMac) unti
-
An unknown Error occurred (0xfffee6c0)
Whenever I start iTunes, I get an error message that states, "We could not complete your iTunes Store request. An unknown error occured (0xfffee6c0) There was an error in the iTunes Store. Please try again later." While this is annoying, I can dismis