Downloading the string as an XML file

I tried to download a string stored in session to be downloaded as a XML file. I am able to download the file. But the problum I am getting space at the top of the file
The code I used is like
<%
String xmlContent = xmlContent.trim();
     SAXBuilder builder = new SAXBuilder();
     Document doc = builder.build(new ByteArrayInputStream(xmlContent.getBytes()));
     XMLOutputter outputter = new XMLOutputter(Format.getPrettyFormat());
     //response.setContentType("APPLICATION/XML");
     response.setContentType( "application/xml" );
     response.setHeader("Content-Disposition","attachment; filename=\""+ fileName+"" + "\""+"");
     try{
          //outputter.output(doc,System.out);
          outputter.output(doc,out);
          //outputter.o
     catch(Exception e){
          System.out.println("Exception while displaying config request data "+ e);
%>
the output has spaces above the xml prolog. Can anybody help me in solving this issue.
Thank you.

I have designed an application that uses XML
as the storage instead of database.Ok.
I think searching for a particular element in an XML
file is complex, and other than that I am not seeing
any problem.You could abstract that complexity away behind an Adapter.
So I need u guys view points on this
"usage of data in an XML file".It depends on the nature and format of that to determine if it's a good idea. You need to consider a number of factors when deciding how to persist data. How much data is there, how often does the format and/or semantics of that data change, how is the data presented or processed. What is the lifetime of that data, what is the ratio of writes to reads. what is the access scope of the data, how secure does the data need to be.
Finding the most appropriate format for data is oten more important than finding the most appropriate algorithm for a program, since data often has a longer life time that the programs that access it.

Similar Messages

  • Can I manually edit the iTunes Music Library.xml file

    Here's why.
    Noticed on my Apple TV that there were a number of podcasts that when selected would say "Apple TV cannot play the current song".
    Looked in iTunes and these podcasts are no where to be found. Did some searches in Spotlight and also, turned up zeros. Not found.
    I then looked directly into my iTunes Music Library.xml file and sure enough there are the records.
    What is odd is that the location of all the bad songs have a similar invalid path.
    Bad path.
    <key>Location</key><string>file://localhost/Volumes/iTunes/iTunes/iTunes%20Music/Podcasts/KQED/podcast.mp3</string>
    Correct Path
    <key>Location</key><string>file://localhost/Volumes/iTunes/Music/Podcasts/KQED'/podcast.mp3</string>
    Now, all of these have dates that lead me to believe this was due to an iTunes upgrade back in September of 2005. It doesn't look like they are causing problems with iTunes itself. However, it is quite annoying for my Apple TV.
    Question. Is there a different way to fix this than just manually removing the entries from the xml file?
    I haven't tried to edit the iTunes Music Library.xml file just yet as I want to make I don't totally screw things up first.

    I did some additional testing here and I deleted the track information from the iTunes Music Library.xml
    On start up of iTunes, it does not add the deleted file back in. On the Apple TV, it still shows the bad file.
    What I think that means is that even the Apple TV gets its playlist information from another source.
    I have also started on another track which is to remove all of my podcasts from iTunes. Which I have now done.
    The only ones left are these bad tracks that only show up in the iTunes Music Library.xml file and more importantly on my Apple TV.
    I'd put this on the podcast or the Apple TV thread, but still believe this is an iTunes issue.

  • How to write the nodevalue back to xml file?

    Hi, Everybody:
    These are two packages I used. javax.xml.parsers.*,org.w3c.dom.*
    Now I use "setNodeValue("abc") to set the node value to "abc". But it is not really saved back into XML file. It only change the node value in memory.
    How to write the changes back to XML file? Thank you very much for your help.
    Michelle

    * Version : 1.00
    * File Purpose : Given the xml file loads into dom and recreate the file with the updated values.
    * Developer : Kashif Qasim : 25/july/04
    * Modify detail :
    import java.lang.*;
    import java.io.*;
    import java.util.*;
    import java.text.*;
    import org.w3c.dom.*;
    import org.apache.xerces.parsers.DOMParser;
    import org.apache.xerces.*;
    public class XMLWriter
    private String displayStrings[] = new String[5000];
    private int numberDisplayLines = 0;
    private Document document;
    //private final Node c;
    public synchronized void displayDocument(String uri,Vector UpdatedValues,String getTaskID)
    try {
    DOMParser parser = new DOMParser();
    parser.parse(uri);
    document = parser.getDocument();
    display(document, "",UpdatedValues);
    } catch (Exception e) {
    e.printStackTrace(System.err);
    ReadXmlConfig objReadXmlConfig = null;
    FileWriter filewriter = null;
    try {
    filewriter = new FileWriter(uri);
    for(int loopIndex = 0; loopIndex < numberDisplayLines; loopIndex++){
    filewriter.write(displayStrings[loopIndex].toCharArray());
    //System.out.println("displayStrings[loopIndex].toCharArray() "+displayStrings[loopIndex].toString());
    //filewriter.write("\n");
    filewriter.close();
    System.gc();
    objReadXmlConfig = new ReadXmlConfig();
    objReadXmlConfig.ITSLog("File updated for "+getTaskID+" succesfully, file is closed now ");
    } catch (IOException e) {
    System.err.println("Caught IOException: " + e.getMessage());
    objReadXmlConfig = new ReadXmlConfig();
    objReadXmlConfig.ITSErrorLog("File updated FAILED for "+getTaskID+". Reason for file error "+e.toString());
    }finally {
    if (filewriter != null) {
    System.out.println("Closing File");
    objReadXmlConfig =null;
    try{
    filewriter.close();
    }catch(IOException e){
    System.err.println("Caught IOException: " + e.getMessage());
    } else {
    System.out.println("File not open");
    private void display(Node node, String indent, Vector UpdtRecs)
    if (node == null) {
    return;
    int type = node.getNodeType();
    NodeList nodeList = document.getElementsByTagName("QueryParm");
    int TotalRecs = UpdtRecs.size();
    switch (type) {
    case Node.DOCUMENT_NODE: {
    displayStrings[numberDisplayLines] = indent;
    displayStrings[numberDisplayLines] +=
    "<?xml version=\"1.0\" encoding=\""+
    "UTF-8" + "\"?>";
    numberDisplayLines++;
    displayStrings[numberDisplayLines] += "\n";
    display(((Document)node).getDocumentElement(), "",UpdtRecs);
    break;
    case Node.ELEMENT_NODE: {
    if(node.getNodeName().equals("QueryParm")) {
    for(int i =0 ; i< nodeList.getLength() ; i++)
    Node nodeQry = nodeList.item(i);
    NamedNodeMap nnp = nodeQry.getAttributes();
    for(int j= 0 ; j < nnp.getLength() ; j++)
    Attr atr = (Attr) nnp.item(j);
    if(atr.getName().equalsIgnoreCase("value_"+(i+1)))
    //System.out.println(atr.getName() +" : " + atr.getNodeValue() );
    atr.setNodeValue(UpdtRecs.get(i).toString());
    displayStrings[numberDisplayLines] = indent;
    displayStrings[numberDisplayLines] += "<";
    displayStrings[numberDisplayLines] += node.getNodeName();
    int length = (node.getAttributes() != null) ?
    node.getAttributes().getLength() : 0;
    Attr attributes[] = new Attr[length];
    for (int loopIndex = 0; loopIndex < length; loopIndex++) {
    attributes[loopIndex] = (Attr)node.getAttributes().item(loopIndex);
    for (int loopIndex = 0; loopIndex < attributes.length; loopIndex++) {
    Attr attribute = attributes[loopIndex];
    displayStrings[numberDisplayLines] += " ";
    displayStrings[numberDisplayLines] += attribute.getNodeName();
    displayStrings[numberDisplayLines] += "=\"";
    displayStrings[numberDisplayLines] += attribute.getNodeValue();
    displayStrings[numberDisplayLines] += "\"";
    displayStrings[numberDisplayLines]+=">";
    numberDisplayLines++;
    NodeList childNodes = node.getChildNodes();
    if (childNodes != null) {
    length = childNodes.getLength();
    indent += " ";
    for (int loopIndex = 0; loopIndex < length; loopIndex++ ) {
    display(childNodes.item(loopIndex), indent,UpdtRecs);
    break;
    case Node.CDATA_SECTION_NODE: {
    displayStrings[numberDisplayLines] = "";
    displayStrings[numberDisplayLines] += "<![CDATA[";
    displayStrings[numberDisplayLines] += node.getNodeValue();
    displayStrings[numberDisplayLines] += "]]>";
    numberDisplayLines++;
    break;
    case Node.TEXT_NODE: {
    displayStrings[numberDisplayLines] = "";
    String newText = node.getNodeValue().trim();
    if(newText.indexOf("\n") < 0 && newText.length() > 0) {
    displayStrings[numberDisplayLines] += newText;
    displayStrings[numberDisplayLines] += "\n";
    numberDisplayLines++;
    break;
    case Node.PROCESSING_INSTRUCTION_NODE: {
    displayStrings[numberDisplayLines] = "";
    displayStrings[numberDisplayLines] += "<?";
    displayStrings[numberDisplayLines] += node.getNodeName();
    String text = node.getNodeValue();
    if (text != null && text.length() > 0) {
    displayStrings[numberDisplayLines] += text;
    displayStrings[numberDisplayLines] += "?>";
    displayStrings[numberDisplayLines] += "\n";
    numberDisplayLines++;
    break;
    if (type == Node.ELEMENT_NODE) {
    displayStrings[numberDisplayLines] = indent.substring(0,
    indent.length() - 4);
    displayStrings[numberDisplayLines] += "</";
    displayStrings[numberDisplayLines] += node.getNodeName();
    displayStrings[numberDisplayLines] += ">";
    displayStrings[numberDisplayLines] += "\n";
    numberDisplayLines++;
    indent += " ";
    public static void main(String args[])
    Vector xmlValue = new Vector();
    xmlValue.add(0,"Kashif");
    xmlValue.add(1,"Qasim");
    //displayDocument("NewMediation.xml",xmlValue);
    <?xml version="1.0" encoding="UTF-8"?>
    <Mediation>
    <Task1>
    <Source>
    <SourceDriver>com.microsoft.jdbc.sqlserver.SQLServerDriver</SourceDriver>
    <SourceConnection>jdbc:microsoft:sqlserver://10.2.1.58:1433;DatabaseName=MTCVB_HDS;</SourceConnection>
    <SourceUser>sa</SourceUser>
    <SourcePassword>sa</SourcePassword>
    <Table>
    <SourceTable>t_Agent</SourceTable>
    <SourceQuery><![CDATA[SELECT SkillTargetID,PersonID,PeripheralID,EnterpriseName,PeripheralNumber,Deleted,TemporaryAgent,AgentStateTrace,ChangeStamp FROM t_Agent where SkillTargetID > {value_1} order by SkillTargetID]]>
    </SourceQuery>
    <SourceParm BusinessRule="" ColumnName="SKILLTARGETID" ColumnNumber="1" DataType="Numeric" DefaultValue="0" Format="mm/dd/yyyy xx:xx:xx XX">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="PERSONID" ColumnNumber="2" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="PERIPHERALID" ColumnNumber="3" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="ENTERPRISENAME" ColumnNumber="4" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="PERIPHERALNUMBER" ColumnNumber="5" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="DELETED" ColumnNumber="6" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="TEMPORARYAGENT" ColumnNumber="7" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="AGENTSTATETRACE" ColumnNumber="8" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <SourceParm BusinessRule="" ColumnName="CHANGESTAMP" ColumnNumber="9" DataType="String" DefaultValue="" Format="">
    </SourceParm>
    <QueryParm FldName_1="SkillTargetID" FldType_1="Number" value_1="0">
    </QueryParm>
    </Table>
    </Source>
    </Task1>
    </Mediation>
    The QueryParm values are updated thru this code :)
    Hope it helps u ...

  • How can I parse an XML string, (not an XML file)?

    Hi,
    I am using Xerces2 Java Parser 2.4.0,
    I wanta parse an XML string, not an XML file, but
    in the Parser class there is only following methods:
    parse(InputSource source)
    parse(java.lang.String systemId)
    thanks

    hi
      InputSource is = new InputSource(new ByteArrayInputStream(xmlSrc.getBytes()));
      HTH
    vasanth-ct

  • How to modify the priority of UWL XML File??

    Hello,
    How do you modify the priority of a UWL generated XML file? Ths xml file was generated when I registered the SRM system in UWL.
    I tried using the tab, Universal Worklist Configuration -> Upload new Configuration but it gives an exception "Operation not allowed".
    The reason for doing this,
    Conflicting ItemTypes are defined in the SRM XML file and one of the pre-defined SAP XML file (uwl_erp2005_buyer), and the SRM XML file has a priority of "Low" compared to medium priority for the erp xml. I need to change the SRM XML priority to "HIGH".
    Any help is appreciated.
    Thank you, John

    Erwin,
    Thanks for your reply.
    I downloaded the xml file, modifed some content. While uploading with the same name, making it a high priority and selecting the required system from the dropdown, "Adapt to System", it gives the following error
    Wed Apr 08 15:50:47 CDT 2009 : Operation not allowed on UWL generated Configuration:uwl.webflow.SAP_SRM_IAC
    Any reason the system does not allow doing this?
    John Miller

  • Reg: Downloading the internal table into excel file.

    Hi,
    My requirement is i am collecting data in the internal table and i have to download the contents in an excel file and i have declared like this.
    PARAMETERS : x_test    TYPE string
                          DEFAULT 'C:\temp\file.txt'.
    I have given the default file path  like this and i am using the function module .
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
      BIN_FILESIZE                    =
          FILENAME                      = OUTPUT_PATH
          FILETYPE                      = 'DAT'
    IMPORTING
      FILELENGTH                      =
        TABLES
          DATA_TAB                        = INT_INPUT
      FIELDNAMES                      =
       EXCEPTIONS
         FILE_WRITE_ERROR                = 1
         NO_BATCH                        = 2
         GUI_REFUSE_FILETRANSFER         = 3
         INVALID_TYPE                    = 4
         NO_AUTHORITY                    = 5
         UNKNOWN_ERROR                   = 6
         HEADER_NOT_ALLOWED              = 7
         SEPARATOR_NOT_ALLOWED           = 8
         FILESIZE_NOT_ALLOWED            = 9
         HEADER_TOO_LONG                 = 10
         DP_ERROR_CREATE                 = 11
         DP_ERROR_SEND                   = 12
         DP_ERROR_WRITE                  = 13
         UNKNOWN_DP_ERROR                = 14
         ACCESS_DENIED                   = 15
         DP_OUT_OF_MEMORY                = 16
         DISK_FULL                       = 17
         DP_TIMEOUT                      = 18
         FILE_NOT_FOUND                  = 19
         DATAPROVIDER_EXCEPTION          = 20
         CONTROL_FLUSH_ERROR             = 21
         OTHERS                          = 22.
    My requirement is i dont want to change my extension as .txt from .exl to my parameter addition and in the function module the file type should be 'dat' only and in the runtime i want to change the file name which i have given in the .
    PARAMETERS : x_test    TYPE string
                          DEFAULT 'C:\temp\file.txt' this file.txt into datas.xls.
    it would be grateful if some one share some valuable views to wards this query
    Thanks and Regards,
    Keny

    Hi,
    Use this code.
    It will ask for the file name...there u can change.
      data : l_filename type string,
             l_filetype type char10,
             l_path type string,
             l_fullpath type string.
      l_filetype = 'DAT'.
    *Get the file name
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
        EXPORTING
          FILE_FILTER          = '*.DAT'
          INITIAL_DIRECTORY    = 'C:\'
        CHANGING
          FILENAME             = l_filename
          PATH                 = l_path
          FULLPATH             = l_fullpath
        EXCEPTIONS
          CNTL_ERROR           = 1
          ERROR_NO_GUI         = 2
          NOT_SUPPORTED_BY_GUI = 3
          others               = 4.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      check l_fullpath is not initial.
    *Download file
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        EXPORTING
          FILENAME                = l_fullpath
          FILETYPE                = l_filetype
        CHANGING
          DATA_TAB                = t_data_sum[]
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          NOT_SUPPORTED_BY_GUI    = 22
          ERROR_NO_GUI            = 23
          others                  = 24.
      IF sy-subrc NE 0.
        MESSAGE e398(00) WITH sy-subrc ' Error downloading file' '' ''.
      ENDIF.
    Regards
    Sandeep REddy

  • How to change the attributes of an XML file

    hi peeps 'ope you can help me here i need to change the attributes of an xml file, i parse it first using a DOM parser but i cant find a way to change the attributes in the XML file, setAttribute() works only at runtime and doesn't change the attribute in the file itself. I can't find a method that will answer my question. I've searched through the forum and found similar threads....they say in order to write and change the attribute i must use the write() method of the XmlDocument class defined in com.sun.xml.tree.XmlDocument. But, i found another thread, and it says that com.sun.xml.tree.XmlDocument is not safe to use and i should use org.apache.crimson.tree.XmlDocument.....i can't find the XmlDocument class and the API for this package so i really dont know where to start...hope you guys can help me! thnx

    thanks for responding roland....i already found the solution...i didn't use the XmlDocument class because i can't find any documents about it except for JAXP 1.0 here is my code snippet...i used the TransformerFactory and Transformer class to write
    import org.w3c.dom.*;
    import org.w3c.dom.traversal.*;
    import javax.xml.parsers.*;
    import javax.xml.transform.*;
    import javax.xml.transform.dom.*;
    import javax.xml.transform.stream.*;
    Document doc = null;
    DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
    DocumentBuilder db = dbf.newDocumentBuilder();
    dbf.setValidating(false);
    doc = db.parse(fileGetFile); //this is the XML file
    n1 = (Node)doc.getDocumentElement();
    e1 = (Element) n1;
    NodeList nodeList = doc.getElementsByTagName ("File");
    //just insert whatever you want to do with the XML...parse it..set/change the attribute..etc....sample snippet below changes the attribute downloaded to "no"
    for(int iWriteFailed = 0; iWriteFailed <nodeList.getLength() ; iWriteFailed ++){     
    n2 = nodeList.item(iWriteFailed);
    e2 = (Element) n2;          
    e2.setAttribute("downloaded", "no");}
    try{
    TransformerFactory transformerFactory = TransformerFactory.newInstance();
    Transformer transformer = transformerFactory.newTransformer();
    transformer.transform(new DOMSource(doc), new StreamResult ( new FileOutputStream ( fileGetFile) ) );}
    catch(Exception trans){}
    thanks for responding and keeping the information interchange alive here in the forum...
    Pau

  • I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    The D610 needs ACR 8.3 so you are easily covered there.  I am not entirely clear on the process you are using the bring the files onto your hard drive.  The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
    If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

  • How to place the images in Indesign xml file by Javascript?

    How to place the images in Indesign xml file by Javascript?
    We got the Indesign xml file, how to give the image placement link by Indesign javascript? Please help me its urgent.

    Hi,
    You can pass the image url as a href attribute=> file:///Users/me/Documents/my_pic.jpg directly within your xml. It just needs that you pass a local, static and valid url.
    If you want to add image later once the xml is flowed and so target specific nodes and inject images, it's a bit more complex. If the node is not part of the layout, you may try to reach the XMLElement objet and such an attribute, then layout the element.
    var x = some XMLElement
    x.xmlAttributes.add("href","file:///Users/m/Documents/my_pic.jpg" );
    If already placed, then you have to get the associated pageItem, then place your file into it.
    pagItm.place ( File ( "/Users/m/Documents/my_pic.jpg" ) );
    Hope that helps,
    Loic
    http://www.loicaigon.com

  • How to get the encoding of a XML file ...

    Hi,
    How do you get the encoding of a XML file?
    For example,
    <?xml version="1.0" encoding="SJIS"?>
    I am trying to retrieve the above encoding="SJIS", but I can't seem to locate the API for doing so.
    Thanks in advance for any help,
    Eric

    Hi ddossot,
    Thanks for your suggestion.
    However, the xerces.jar file that comes with my old tomcat server is an old version and thus, the getEncoding method is not even present in the DocumentImpl class. The option to update to a newer version of tomcat and xerces is not available. What a pity... :-(
    Well, I just have to try to find a way around. Worst case scenario, parse the first line in the xml file myself.
    Regards,
    Eric

  • How to download the script data into pdf file

    how to download the script data into pdf file
    i have one option to download the script data to pdf file --->rstxpdft4 program.
    i have one doubt how to use this proogram.or any function module to download the script data to pdf file.
    Thanks and regards,
    Sri.

    Hi      Sri Sai,
    I know one method to convert the sapscript to pdf file :
    first generate a Spool Request for the required Sapscript
    then goto transaction SP01 and copy the generated Spool Request number
    now execute the SAP report RSTXPDFT4
    here enter the copied Spool request number and the target directory into the parameters
    execute the report
    required pdf file will be generated into the target directory
    i hope it will help you out
    Please refer this simple program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
    Reward points if found helpful....
    Cheers,
    Eshwar.

  • I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files?

    I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files? Cheers!

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

  • I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
    http://www.apple.com/support/macbookpro
     Take it somewhere that has better broadband. The best you can do sometimes is invest in new modem that works with your system instead of the rental etc in most cases.
    Do a Safe Boot.
    Make sure your firewall is set properly. Don't use 3rd party. AV software can get in the way.
    Make sure you are getting the service and a clean strong modem signal - slow is one thing but if it drops off and can't maintain a connection you have hardware issues, not software - and upgrade to a new OS doesn't tend to improve, it may even not work with older networking equipment once you do get it.
     I agree and think electronic only goes too far. And when you do get it: burn the package and manually set it aside first before running the intaller! make a flash memory installer, put it on DVDs too.

  • HT1349 I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I don't think it's possible if you are stuck in recovery mode but I may be wrong...
    Since your device qualifies for iOS 8(.1), that is the version that will be downloaded/restored to the iPad.
    I do know that you can restore your iPad (from backup & as new) and keep the same iOS version if you restore using the iPad itself under Settings/Reset/Erase All Content and Settings but since you can't access this because your stuck in recovery mode, the point is moot.
    Have you tried downloading the update in the middle of the night (2 am or so) where dropouts are much less likely to occur?
    It's always possible to take your device in to an Apple Store (make a Genius Bar reservation first) and do the iOS update there in the Apple Store.. I'm sure they will gladly help you out with it and not charge you a thing. The trouble with that would be if you don't have an Apple Store nearby.
    Sorry I couldn't be of any more help.

  • How dos the application will know the path of persistence.xml file

    Hi ,
    I am seeing examples for ConatierManaged EntityManager
    @PersistenceContext
    public class Test extends HttpServlet
    public void doGet()
    EntityManager em
    // JnDI Lookup code
    em = (EntityManager) ctx.lookup("java:comp/env/persistence/em");
    em.persist(Employee)
    }Inside web.xml file
    <web-app>
    <persistence-context-ref>
    <persistence-context-ref-name>persistence/em</persistence-context-ref-name>
      <persistence-unit-name>my-pu</persistence-unit-name>
    </persistence-context-ref>
    </web-app>Please tell me how the Application will know the path of persistence.xml file .
    Thank you for reading

    it is predefined; JPA always looks for the persistence.xml file in the META-INF folder.

Maybe you are looking for

  • Error while re deploying  .ear  file in  .eap project

    Hi Every one, i developed ejb module ,It Exposed to as Webservice . I Deployed  .ear file into server  got result  successfully. Now i made changes in EJb module by adding some other methods . Then i perform  build a Ejb Archive, EAp project Archive.

  • How do I connect MacBook Air to external display?

    What methods are available to connect a MacBook Air to an external display?

  • IGS Graphics Rendering Problem

    Hi experts, I have the following problem with the igs: I have 2 applications with business graphics technicaly the same. Both worked fine with the same igsURL, but lately one of them is showing "Graphics Rendering Problem" Can You tell me please wher

  • Html,css injector for firefox

    i found a great math page, but it looks ugly,so i downloaded a css injector plugin for chrome ( https://chrome.google.com/extensions/detail/hiadkoalmmkgennhcldmdlndfgagkcim?hl=en ) after editing the css, it will be applied on all subpages on that mat

  • Changing proxyagent password issues

    Something keeps locking out my proxyagent user and I think its a client configured with the wrong password. a) How do I change the password in the ldap configuration on the client when the proxyagent password is changed? b) How do I change the proxya