DPMRA.exe Error when backing up databases

We are running DPM 2012 SP1 Update 6. Everything has been running fine but recently I am getting Recovery Point failed on SQL databases mainly. I see the following error on the DPM Server.
I receive the following in the Application log.
Faulting application name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Faulting module name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Exception code: 0xc0000005
Fault offset: 0x000000000025e6af
Faulting process id: 0x1f98
Faulting application start time: 0x01cf7b78bdcaab24
Faulting application path: C:\Program Files\Microsoft DPM\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft DPM\DPM\bin\DPMRA.exe
Report Id: aeb2ff9c-e76c-11e3-91db-b499bafbd0a4

Hi,
See if the script to cleanup DPMRA.CRASHDETECT files in this
post resolves the problem.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Error when backing up databases: stops on "autotext data version"

Hello all,
A new Bold owner here, having had an 8800 for a couple of years. Like the Bold very much except for not being able to use BBSmart Alarm Pro any more, but that's a different subject...
When I attempt to backup the Bold, the Desktop Manager stops with "Error Backing Up Databases" when I am (apparebntly) partway through AutoText Data Version.
Any help with this would be greatly appreciated!
Thanks in advance,
Alex

jforce : in the desktop manager somewhere on the right you have the advanced options. There, you can do a backup one database at a time. Do that for all databases and eventually you will see the databases that have an issue.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Avoiding concurrency errors when updating a database through AJAX

What are some strategies for avoiding concurrency errors when updating a database through AJAX. That is, in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row), what are some good ways yo prevent the two updates from colliding? On the JavaScript side one might make the AJAX call synchronous, but I question whether that is the best way to do it. Has anyone else confronted this?

Well, since no one seems to have any ideas so far, I'll throw in my two cents worth.
I'm not too familiar with AJAX so my advice may be limited.
I suggest you do a google search on Optimistic concurrency database to get some ideas on how to handle it.
If your update/insert/delete query is thread safe, then even if the same user double clicks the button fast enough to immediately have another update to the same record, then the first update will complete before the second one is carried out. Therefore no harm is done since he is just updating the same record. Since a typical update/insert/delete takes only a few milliseconds (querying may take a lot more time), its not likely he can click the button that fast. (I assume your using connection pooling for speed).
The trouble comes up when two people call up data from the same record in different browsers. The first one updates/inserts/deletes the record. Now the other user is looking at old data. When he updates/inserts/deletes, there is a problem. One way to handle this is to keep a copy of all the fields from that record in each user's session scope when they first fetch it from the database (example: oldName). Then when you go to update some time later, to this:
sql= update person set name=newValue where personID=3344 and name=oldName
Note oldName is from session scope.
If name in the database has changed, the update will not occur and will return 0 records updated. If it didn't change, it will update.
Note your update function should not throw an exception if it cant update, it should return false. Return true if it worked.
Example: public boolean updateName(String name)
Similiarly, your insert should not throw an exception if the record already exists, it should return false meaning it cant insert.
Exaple: public bolean insertName(String name). Same thing with delete function.
If a record cant be updated due to someone else updating the record while the user was looking at data, return a message that it wasn't updated due to that problem. Then show the user the new value in the database ask him if he wants to overwrite the new change.
Note even if you show 100 records on the JSP, only update the ones that have changed and not all 100. This way, its not likely he has updated the same records someone else has altered. Less likely a colision compared to updating all 100.
If your updating/inserting/deleting more than 1 record (say, 3), then you should look into setting up a transaction in addition to all the above and rolling back all of them if one fails.
Reading the section on databases from http://www.javapractices.com/home/HomeAction.do may also help.

Error when making a database call froman ejb

Hello,
I am getting the following error when accessing the database from an ejb -
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.RemoteException
     at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.mapSystemException(ShutdownUtilDelegate.java:68)
     at javax.rmi.CORBA.Util.mapSystemException(Util.java:65)
     at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
     at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
     at com.servlets.login.EUClsLoginServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)
Caused by: java.rmi.RemoteException
     at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.java:451)
     at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:545)
     at com.ejb.EUClsLookupBean_EJBObjectImpl.fetchAllLookups(EUClsLookupBean_EJBObjectImpl.java:101)
     at com.ejb._EUClsLookupBean_EJBObjectImpl_Tie._invoke(Unknown Source)
     at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(GenericPOAServerSC.java:569)
     at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(GenericPOAServerSC.java:211)
     at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAServerSC.java:113)
     at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:275)
     at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(LocalClientRequestImpl.java:96)
     at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(ClientDelegate.java:237)
     at com.sun.corba.ee.internal.POA.GenericPOAClientSC.invoke(GenericPOAClientSC.java:97)
     at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
     at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
     ... 16 more
Any help?

Please look in those 16 other stack traces for more details, there should be an actual SQLException if
it's a database problem, and/or the actual bean method that caused the problem.
Regards,
Marina

11gR2 Error when installing a database and schema

I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
I getting this error
ORA-01503: CREATE Controlfile / Failed
and
ORA-01158: Database already mounted
i need to set up a database a 3 different schema
because i am doing a install of Hyperion Share service, Essbase and Planning
Please advise

Pl do not post duplicate threads - 11gR2 Error when installing a database essbase on install of 11.1.2.1
Your original thread was moved to the Essbase forums since this is Essbase related
Srini

261 error when backing up just purchases

261 error when backing up just purchases I should not be getting this error if the problem is with playlist with the wrong characters in them, I am backing up just purchases.
Thanks In advance Krisal
Gateway Pentium 4 Windows XP Using DVD and CD

Help! I received the same error.
Acer laptop Windows Vista 1 GB RAM

Error when opening the database with resetlogs

ORA-00603: ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
WHEN I open the database with RESETLOGS

Well you definitely need to post more information here.
Looking at what you have posted, all that I can reply is
ORA-00603: ORACLE server session terminated by fatal error
Cause: An ORACLE server session is in an unrecoverable state.
Action: Login to ORACLE again so a new server session will be created

Errors when backing to tape ORA-19624 ORA-19511

Hi,
We got an error yesteday when backing u to tape, this happens very rarely but following is the message
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-03015: error occurred in stored script BGT2_BSBGPRD1_HOTBCK_DY
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19502: write error on file "db_BSBGPRD1_98108_1_667503967", blockno 4323713 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: VxBSASendData: Failed with error:
Server Status: Communication with the server has not been iniatated or the server status has not been retrieved from the server.
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
any suggestions
Kedar

Hi,
If I check in TOAD, then I see that the max size of the tablespace is unlimited. Btw, Tablespace XYZ is actually an index tablespace - dont know if this makes a difference. The max size of the data tablespace is also unlimited.
Using the query select * from user_ts_quotas or dba_ts_quotas, I dont see tablespace XYZ or its data tablespace in this result set. I'm not sure why.
Maybe giving the user unlimited quota on the tablespace might solve the problem - i dont know, but if it does, then I have to ask why has it worked all the time without this and only now it's giving an error??
The user has been doing the same thing everyday for the past couple of years and only now getting this error.

Show error when connect Company Database by DI API in 2004B

Hi
I use the DI API to connect company database in 2004B. I can get the company lists by SAPbobsCOM.CompanyClass.GetCompanyList().
I write a program to testing the connection that show two different result in client and server side.
- It show the error -2147221164 (Class not registered), when connect company database in client PC.
- The same program run in server, it connected.
I already checked my config as below
- SAP 2004B is installed 7.20.145 SP:00 PL:25
- SAPbobsCOM67.dll is 6.70.188.0 version, and "Special Build Description" is 21.
The client and server side are same config.
Any ideas how I should handle this?
Thanks
Winson

sorry! it is wrong posted in here!!

Schema Diagram error when drop new database objects

Hi All,
I am following the document to ad database objects to the Schema Diagram using JDeveloper 11.1.1.4. But when I drag a view to the diagram, it gives me this error.
An error was encountered
CAR_REFERENCE_CODES_V.CODE
Name CODE is already in use.
Here CAR_REFERENCE_CODES_V is the name of my view and CODE is the column name in the view.
What should I do?
Thanks

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Experiencing an error when backing up my iphone 4 after loading the newest software

i just finished downloading the new software via itunes onto my iphone4. There is an error when adding back the backup to the phone. i dont have my apps and my photos, Where did they go?

ME TO! :/

Can anyone please help? I am getting "javaw.exe" error when trying Struts

I am getting the following error when trying Structs action in my application.
javaw.exe has generated errors and will be closed by Windows,
You will need to restart the program.
An error log is being created.
the application server was stopped after this error.
I reinstalled using j2sdk1.4.2_10, this error still remains.
can anyone please tell me how to fix it ?
thanks a lot for your help.
I am running app on Windows 2000 . P4 3G HZ CPU, 1M RAM

It's not viruses I was talking about - it was session hijacking and electronic evesdropping. And as far as a browser taking up space....seriously? We're talking MBs here.....
I use Firefox exclusively, because frankly, I don't like Safari any more than I like IE.....(actually, I really hate IE - despite its being around for forever, it is still not a browser that does much for me).
But, to each his own. That's not really the point I was making. It's just that we have some very non tech-savvy folks asking questions here, and we need to make sure that the advice we are giving out is not going to increase their risks in any way. I was just trying to be mindful of making sure that we do inform to the best degree possible....
No offense intended. Hopefully, none taken!
Cheers,
GB

TimeMachine errors when backing up to XSan Volume

Hi all,
I've been trying to solve this problem for a while. I have an apple xraid unit with a timemachine enabled afp share that I want to use for client backups over our network.
10.5 and 10.6 clients initially can configure timemachine preferences to use this share and the first backup image gets written. However, on subsequent backups a new sparse-image bundle is created with a numerically incremented filename. (i.e. client_backup.sparsebundle gets created then sometime later timemachine creates client_backup(01).sparsebundle).
Also, I've seen subsequent backup attempts simply fail with "Volume cannot be accessed (exit code 109)" errors. From the client console, I see these log messages:
Mounted network destination using URL: afp://[email protected]/TimeMachine
com.apple.launchd[1] (com.apple.netauth.sysagent[1333]) Exited with exit code: 255
diskarbitrationd[13]: unable to repair /dev/disk2s2 (status code 0x00000008)
om.apple.backupd[1332]: Failed to mount disk image /Volumes/TimeMachine/client_backup.sparsebundle (DIHLDiskImageAttach returned: 109)
Has anyone seen similar behavior? I'm stumped as to why the first backup is apparently successful but subsequent backups fail. Thanks for reading.

I'm seeing the same problem over our network to an Xserve with an external RAID 5 volume.
The user that's having the problem had lots of errors when trying to back up due to funny files on his hard drive that were WAY down in the hierarchy of his drive... like 15 folders deep.
I'm going to try running Disk Warrior on his drive to see what's up. Maybe somethings broken...

'No such host is known' error when configuring Reporting database

Hi,
We are joining two report server databases using reporting services config manager. The problem is when we are trying to connect database on another machine we are receiving following error at step 'generating Rights script'
System.Net.Sockets.SocketException: No such host is known
at System.Net.Dns.GetAddrInfo(String name)
at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
at ReportServicesConfigUI.RSDatabase.IsLocalDbServer(String dbServer)
at ReportServicesConfigUI.RSDatabase.GrantRSConnectionRights()
at ReportServicesConfigUI.RSDatabase.CreateNewDatabase()
As per step mentioned in following link,
http://blogs.msdn.com/b/sameersurve/archive/2009/06/15/no-such-host-is-known-error-when-configuring-ssrs-2008.aspx
We tried opening port 1434 for the Reportserver db machine. but it didnt worked for me.
Following are points i feel could be the reason of failure,
1. The two machine we are working on are in different domains.
2. The Product version of the two reporting servers are different.
Have anyone experienced this if yes any solution that i can try?

Hi Shrikant_k,
If we are using a remote database server for the report server database, we should refer to the following tips:
Enable remote connections. And we should also open your firewall software and open the port that SQL Server listens on. For the default instance, this is typically port 1433 for TCP/IP connections. To verify that the instance accepts remote connections,
please refer to the following article:
http://technet.microsoft.com/en-us/library/ms157300(v=sql.105).aspx
When you enable remote connections, the client and server protocols will also be enabled. To verify the protocols are enabled, please see:
http://technet.microsoft.com/en-us/library/ms191294(v=sql.105).aspx
When the database server is in a different domain or we are using workgroup security, we must configure the connection to use a SQL Server database login. In this way, we must update the report server database connection every time we change the password
or the account.
When creating a report server database, be aware that not all editions of SQL Server can be used to host the database. The following document is for your reference:
http://technet.microsoft.com/en-us/library/ms157285(v=sql.105).aspx
Reference:
Configuring a Report Server Database Connection
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Why occur CGS error when create OPS database

When I create database on oracle 8.1.7 OPS,I got a error message "ora-29702 error occurred in cluster group service operation".I have successfully tested the watchdog service.The node monitor service and cluster service has been started.Does anyone know which reason cause this problem?
Thanks.jack

Hi,
You are missing the jar file which is responsible for initializing the class. This is the base file for your catalog generation in SQLJ.Is this file missing from your "lib" folder of ur project structure?
Rdgs,
G

DPMRA.exe Error when backing up databases

Similar Messages

Maybe you are looking for