DPS 6.2, w2k3, fills logfile when disabling monitoring-inactivity-timeout
When disabling the setting "Poll Unused Connections to Keep them Active" using DSCC the value for
connectionInactivityTimeoutInSec / monitoring-inactivity-timeout will be set to -1 in the configuration file.
This causes the LDAP Proxy Server to continuously log the line:
BACKEND - WARN - Activity on connections for LDAP server x.x.x.x:389/ takes longer than configured.is there any option to disable the whole "poll" feature?
thanks
.andi
Hi andi,
I cannot reproduce this problem but if -1 value causes the problem, you can either manually remove the connectionInactivityTimeoutInSec:-1 line from the configuration file and restart the proxy or use dpconf set-ldap-data-source-prop monitoring-inactivity-timeout w/o specifying any value (this should remove the attr).
-Sylvain
Similar Messages
-
Does ACE send a RST packet when it reach inactivity timeout?
Hi experts
I have some questions about ace's behavier.
1st one is, Does ACE send a RST packet when it reach to inactivity timeout?
2nd, Does half-closed timeout works properly with "no normalization"?
3rd, How does ACE treat the packets there is no flows in conn table? Drop or forwarding?
ThanksHi Kilsoo,
1st one is, Does ACE send a RST packet when it reach to inactivity timeout?
----yes, the ACE is going to send a RST if the client or server tries to do something over a connection that was already timed out
3rd, How does ACE treat the packets there is no flows in conn table? Drop or forwarding?
drops the connection
Let me do some research for your second question
Cesar R
ANS Team -
Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!
No Apple here, user to user forum.
I will not be releasing any version of iOS ever. -
The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.
In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? -
Dps file automatically opening multiple times when working on another file in the same folio?
dps file automatically opening multiple times when working on another file in the same folio? Can anybody please help
Can you try resetting your preferences first and see if that helps - see Troubleshooting 101: Replace, or "trash" your InDesign preferences
-
I have custiomized the Adobe Reader 11.0.0.4 msi to disable any updating feature available . This is the same as the previous versions which have worked faultlessly. This time when i have deployed 11.0.0.4 it does install on the windows machine but still prompts beside the clock with an icon and message saying would you like to install the update? if i click it it then fails as its already installed. i do not want any user to see this message especaily when that version is already running on the machine! Please see below for further informaiton, Appriciate any help resolving this issue.
Server software:
Operating system: Windows server 2008 R2
Client software:
Operating system: windows 7 64 x pro
Service Packs: SP1
Adobe product: Adobe reader 11.0.0.4
Are the system requirements met? yes
Problem details:
Type of problem: update icon and message still showing at clock even when disabled by customized GPO.
Error message (if any): no erro just popping up!
Logged on as administrator or user? both but deployed via GPO deployment
Can you reproduce the problem when you test the problem on the server? yes i can repude on several PC's
Deployment details
If you are having deployment problems, also record the following:
Base version 11.0.0.0
Any patching/chaining? 11.0.0.1, 11.0.0.2, 11.0.0.3, gpo deployed each version now on 11.0.0.4
Using MSI or EXE? MSI with MST file (MSI from 11.0.0.0 andmerged with Patch 11.0.0.4)
Using the Customization Wizard? YES
Deployment method (AIP, GPO, SCCM, ARD?) GPO
Installing over other products? YES previous versions of adobe reader
Did you attempt to install any third-party scripts or application programming interfaces (APIs) with Acrobat during deployment? If so, does the problem reside with these elements? (To find out, create a test package containing only Acrobat.) no
How did you create the package? customisation wizard Adobe 11.
Does the problem occur when you install the application from a DVD? If so, does the problem occur when you copy the contents of the DVD to a local or network drive? n/afyi
Some feedback in SR 3-6322025251 ...
After some on-going discussions with Product Managers, they don't believe this is expected behavior in the 3 questions (q4), (q5) and (q6).
I have so created 3 new bugs for Development evaluation as no answer or known issue found.
I have created a spin-off SR for each question/bug as per our policy we handle only one issue/bug per SR.
You can follow each question/bug progress in the following SRs :
- (q4) Is it intended behavior to have updated version columns on rows that have not really been updated (as observed in step (sc2-g) and (sc3-g))?
SR 3-6838483321: Entity attribute with change Indicator and version history gets updated even if row unmodified in UI
Bug 16381918 - OBJECT VERSION ATTRIBUTE INCREMENTED EVEN IF ROW UNMODIFIED IN UI
- (q5) How can the NullPointerException (in step (sc2-h)) be explained/avoided?
SR 3-6838483348: NPE in oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded
Bug 16382070 - NPE IN ORACLE.ADF.MODEL.BINDING.DCITERATORBINDING.EXECUTEQUERYIFNEEDED
- (q6) Why does the message in step (sc3-h) mention 'primary key oracle.jbo.Key[10 ]' while the row that really changed has Deptno 20?
SR 3-6838483413: Incorrect primary key value from oracle.jbo.RowInconsistentException
Bug 16382246 - INCORRECT PRIMARY KEY VALUE FROM ORACLE.JBO.ROWINCONSISTENTEXCEPTION
Each bug has been published in MOS and are pending Development triage and evaluation.
On My Oracle Support, I have been able to find bug 16381918, bug 16382070 and bug 16382246.
regards
Jan -
Why am I getting "insufficient RAM to fill" message when creating panoramas when I have 16 GB on my computer?
You don't say which version of PSE or which operating system, but except for PSE 12/mac, all versions of PSE are 32 bit programs, which means they can only use a maximum of about 3 GB of ram, no matter how much you have in your system. You can try going to the editor>preferences>performance and upping the percentage available for PSE.
-
HT1212 how to unlock ipod touch when disabled and says connect to itunes
how to unlock ipod touch when disabled and says connect to itunes?
The answer is in the article you asked this question from: http://support.apple.com/kb/HT1212
-
Server OS: Windows 2008 R2 Standard
Function: Primary Domain Controller and Print Server
Clients: All are running Windows 7 Pro 64-Bit SP1
We're considering disabling the HP Universal Print Driver Language Monitor and in-turn Bi-directional Printing due to potential server spooler instabilities, before we do this the IT Manager wants to be sure:
1. What functionality is lost when disabling Language Monitors and Bi-directional Printing?
2. What else uses Language Monitors and Bi-directional Printing them? In other words what may break?
3. What specifically do Language Monitors and Bi-directional Printing provide?
ThanksAlan (or anyone else):
We're testing disabling the language monitor/bidirectional printing for one particular printer.
Can I confirm this is the procedure for disabling a particular print queue's Language Monitor and Bidirectional Printing? -
1. Locate the relevant Language Monitor registry key in: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
Either delete or rename the registry key (so it cannot be found), in my case: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\HPMLM121
I renamed it to have the date at the end (HPMLM121_2015-01-29).
2. Inside the above registry key is a DLL file mentioned under the DRIVER reference. In my case it's called: hpmlm121.dll.
I searched the entire C drive on the server and this was only found in C:\Windows\System32. I moved this elsewhere out of C:\Windows and also renamed the DLL too.
Therefore preventing Windows from being able to find/use it.
3. I then unticked Bidirectional Printing Support in the Printer Properties Ports tab of the printer in question.
4. Lastly either restart the server (or stop/restart the Spooler service).
I've done all this and the HP Print Notifications for Replace Cartridge etc... are still active.
Any idea why this is?
Thanks -
Ipda mini unable to restore when disabled due to find my iPad.
My daughter has forgotten her password and disabled her mini ipad (iOS 7). I have attempted to restore but get the message that "find my iphone needs to be turned off to restore" on attempting (can't when disabled). I've gone to my iCloud account and removed the device. Still has same error message whn I atempt to restore again in itunes.
Has anyone else had this issue and how do i fix it? Have turned all devices on and off.Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
ORA-01291:missing logfile when FlashingBack a Primary DB in logical standby
OS: Solaris 10 and Windows vista
Oracle version : 10.2.0.4.0 Enterprise Edition and 10.2.0.3.0 Enterprise Edition
We are getting ORA-01291: missing logfile when FlashingBack a failed Primary DB into logical standby
We are following Below procedure for failover and flashback in logical standby.
Primary and standby database name is as below.
primary db_name primdb
standby db_name logicdb
failover
From primdb:
shut abort
From logicdb:
select applied_scn,newest_scn from dba_logstdby_progress;
alter database stop logical standby apply;
alter database activate logical standby database;
Flashing Back a Failed Primary Database into a Logical Standby Database
We are following instructions from below link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#i1050060
SYS@logicdb> SELECT APPLIED_SCN AS FLASHBACK_SCN FROM V$LOGSTDBY_PROGRESS;
FLASHBACK_SCN
302330
1 row selected.
SYS@logicdb> SELECT file_NAME FROM DBA_LOGSTDBY_LOG WHERE NEXT_CHANGE# > (SELECT VALUE FROM DBA_LOGSTDBY_PARAMETERS
WHERE NAME = 'STANDBY_BECAME_PRIMARY_SCN') AND FIRST_CHANGE#<=302330;
FILE_NAME
/logs/app/oracle/flash_recovery_area/LOGICDB/archivelog2/logicdb_1_12_729695607.arc
Note: We have copied above mentioned file to primary archive destination i.e. /logs/app/oracle/flash_recovery_area/PRIMDB/archivelog.
SYS@primdb> startup mount
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2046056 bytes
Variable Size 264243096 bytes
Database Buffers 801112064 bytes
Redo Buffers 6340608 bytes
Database mounted.
SYS@primdb> FLASHBACK DATABASE TO SCN 302330;
Flashback complete.
SYS@primdb> ALTER DATABASE OPEN RESETLOGS;
Database altered.
SYS@primdb> ALTER DATABASE START LOGICAL STANDBY APPLY NEW PRIMARY logicdb;
Database altered.
SYS@primdb> select type,high_scn,status from v$logstdby;
TYPE HIGH_SCN
STATUS
COORDINATOR
ORA-01291: missing logfile
Primary database init.ora parameters are as below
*.db_file_name_convert=('/export/oracle/oradata/primdb/','/export/oracle/oradata/logicdb/')
*.db_name='primdb'
*.instance_name=primdb
*.db_unique_name=primdb
*.service_names=primdb
*.db_recovery_file_dest='/logs/app/oracle/flash_recovery_area'
*.fal_client='LOGICDB'
*.fal_server='PRIMDB'
*.log_archive_dest_1='LOCATION=/logs/app/oracle/flash_recovery_area/PRIMDB/archivelog/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=primdb'
*.log_archive_dest_2='SERVICE=logicdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=logicdb'
*.log_archive_dest_3='LOCATION=/logs/app/oracle/flash_recovery_area/PRIMDB/archivelog2/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLES) DB_UNIQUE_NAME=primdb'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_dest_state_3='DEFER'
*.log_archive_format='primdb_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_file_name_convert=('/export/oracle/oradata/primdb/','/export/oracle/oradata/logicdb/')
*.standby_file_management='AUTO'
*.log_archive_config='dg_config=(primdb,logicdb)'
Standby database init.ora parameters are as below
*.db_file_name_convert=('/export/oracle/oradata/primdb/','/export/oracle/oradata/logicdb/')
*.db_name='logicdb'
*.instance_name=logicdb
*.db_unique_name=logicdb
*.service_names=logicdb
*.db_recovery_file_dest='/logs/app/oracle/flash_recovery_area'
*.fal_client='LOGICDB'
*.fal_server='PRIMDB'
*.log_archive_dest_1='LOCATION=/logs/app/oracle/flash_recovery_area/LOGICDB/archivelog/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=logicdb'
*.log_archive_dest_2='SERVICE=primdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=primdb'
*.log_archive_dest_3='LOCATION=/logs/app/oracle/flash_recovery_area/LOGICDB/archivelog2/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLES) DB_UNIQUE_NAME=logicdb'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='logicdb_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_file_name_convert=('/export/oracle/oradata/primdb/','/export/oracle/oradata/logicdb/')
*.log_archive_config='dg_config=(primdb,logicdb)'Hi ,
The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
1. Archivelogs.
2. Trail Files.
Both should be retained to the needed / required level.
Please execute the below query and check the status of the Extract / Capture process.
The below query displays the information of each capture process in a database.,
COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
COLUMN SID HEADING 'Session|ID' FORMAT 9999
COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
COLUMN STATE HEADING 'State' FORMAT A20
COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
SELECT c.CAPTURE_NAME,
SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
c.SID,
c.SERIAL#,
c.STATE,
c.TOTAL_MESSAGES_CAPTURED,
c.TOTAL_MESSAGES_ENQUEUED
FROM V$STREAMS_CAPTURE c, V$SESSION s
WHERE c.SID = s.SID AND
c.SERIAL# = s.SERIAL#;
Also run this query to check, if the capture is waiting for which logfile.,
COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
SELECT r.CONSUMER_NAME,
r.SOURCE_DATABASE,
r.SEQUENCE#,
r.NAME
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME AND
r.NEXT_SCN >= c.REQUIRED_CHECKPOINT_SCN;
The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
Regards,
Veera -
Hi,
where can I find the active color, which is active (border and fill color), when nothing is selected.
E.g. I can get the active styles, when nothing is selected with:
applied character style of text defaults
and
applied paragraph style of text defaults.
Where nac I find the equivalent for fill and border color?
Thanks
TobiasThanks, that was for CS3. Where can I get that in CS2?
I searched the dictionary of document and application, but got no glue ...
Thanks
Tobias -
Component and Object are not being filled automatically when filling IBase
Hello all,
When filling the Ibase number in a Service Order (Reference Objects), the component and the object ID are not deing filled automatically. But if I fill the component instead of the IBase ID, the Ibase and the object are being filled.
Can anyone help me with this issue, please? I would need the component and the object being filled automatically when entering the Ibase number.
Thank you and Regards.Hi,
Do you have the component assign to a client?
Best regards,
Rui Mariano -
Skip Navigation applying for all pages when disable styles.
Hi All,
I am using APEX 4.0.
I was working on 508 standards for the application, I am having problem seeing "Skip Navigation" link when disable styles through browser (View-style-no style).
I was using "One Level Tabs" template through out the application, I have placed the following code under BODY section
a href="#startcontent" a href="#startcontent" <img src="" height="1" width="1" border="0" alt="Skip Navigation" />
a name="startcontent" /a
when I disable styles the link supposed to show, but right now its not doing that.
Any suggessions , I was also using Breadcrumb Menu Template.
Thanks in Advance.
Edited by: Suma001 on Jul 2, 2012 10:13 AM
Edited by: Suma001 on Jul 2, 2012 10:14 AM
Edited by: Suma001 on Jul 2, 2012 10:14 AMIt worked with this syntax in addition to existing code.
a href="#startcontent" style="display:none" Skip Navigation /a
But not sure why it worked for other theme.
Thank you for the help.
Edited by: Suma001 on Jul 6, 2012 7:48 AM -
How to bridge (fill) gaps when converting a 2006 geometry into a 2002 geometry
Is it at all possible to bridge (fill) gaps when converting a 2006 geometry into a single 2002 geometry. I have a solution for the conversion from 2006 to 2002 provided by BHall but upon further investigation investigation of my dataset some of the multi line polygons have gaps which I need to fill and I am not sure how to go about this.
Here is a simple example of what I am trying to achieve
Before
SELECT (sdo_geometry(2006, 81989, NULL,
mdsys.sdo_elem_info_array(1,2,1,5,2,1,9,2,1,13,2,1),
mdsys.sdo_ordinate_array(16,0.999,16.998,-0.001,17.253,-0.001,18.003,0.999,18.003,0.999,19.001,0.999,19.001,0.999,19.999,-0.001)))
FROM dual
After
SELECT (sdo_geometry(2006, 81989,NULL,
mdsys.sdo_elem_info_array(1,2,1),
mdsys.sdo_ordinate_array(16,0.999,17.253,-0.001,18.003,0.999,19.001,0.999,19.999,-0.001))) FROM dual
Thanks in advanceOkay Roché,
You might need to break this problem down into smaller parts for the forum. All your examples show the gap being replaced by a single vertice - e.g. you want to "snap" the gap together. I'd suggest this is just complicating your question. Once the gap is filled (with a line) then you can run SDO_UTIL.REMOVE_DUPLICATE_VERTICES afterwards to remove the new line if its below your tolerance. I think that Bryan's code wrapped in remove duplicate vertices will solve your second scenario. But overall I think it would be helpful to focus just on the filling and leave the snapping for a follow-up question.
So back to scenario #1, below is some code I wrote a while back that might do what you want or at least get you started. Note that the input must be a multistring and the multistring cannot be "spaghetti". In other words each line in the multistring must be disjoint or at most touch other lines only at endpoints. The goal is to sift through the lines and create a single linestring using the smallest gaps. It's not subtle and will indeed produce bad geometries if the inputs are setup in an impossible manner. There are also some rare geodetic bugs with SDO_GEOM.RELATE that crop up. So you'll note I test both distance and relate in some places. That's intentional though kind of dumb.
Hopefully this helps. If you improve the code please shoot a copy back to me.
Cheers,
Paul
CREATE OR REPLACE PACKAGE dz_gap_fill
AUTHID CURRENT_USER
AS
FUNCTION linear_gap_filler(
p_input IN MDSYS.SDO_GEOMETRY
,p_tolerance IN NUMBER DEFAULT 0.05
) RETURN MDSYS.SDO_GEOMETRY;
END dz_gap_fill;
CREATE OR REPLACE PACKAGE BODY dz_gap_fill
AS
FUNCTION fast_point(
p_x IN NUMBER
,p_y IN NUMBER
,p_z IN NUMBER DEFAULT NULL
,p_m IN NUMBER DEFAULT NULL
,p_srid IN NUMBER DEFAULT 8265
) RETURN MDSYS.SDO_GEOMETRY
AS
BEGIN
-- Step 10
-- Check over incoming parameters
IF p_x IS NULL
OR p_y IS NULL
THEN
RAISE_APPLICATION_ERROR(-20001,'x and y cannot be NULL');
END IF;
-- Step 20
-- Do the simplest solution first
IF p_z IS NULL
AND p_m IS NULL
THEN
RETURN SDO_GEOMETRY(
2001
,p_srid
,SDO_POINT_TYPE(
p_x
,p_y
,NULL
,NULL
,NULL
END IF;
-- Step 30
-- Do the other wilder choices
IF p_z IS NULL
AND p_m IS NOT NULL
THEN
RETURN SDO_GEOMETRY(
3301
,p_srid
,SDO_POINT_TYPE(
p_x
,p_y
,p_m
,NULL
,NULL
ELSIF p_z IS NOT NULL
AND p_m IS NULL
THEN
RETURN SDO_GEOMETRY(
3001
,p_srid
,SDO_POINT_TYPE(
p_x
,p_y
,p_z
,NULL
,NULL
ELSIF p_z IS NOT NULL
AND p_m IS NOT NULL
THEN
RETURN SDO_GEOMETRY(
4401
,p_srid
,NULL
,SDO_ELEM_INFO_ARRAY(1,1,1)
,SDO_ORDINATE_ARRAY(p_x,p_y,p_z,p_m)
ELSE
RAISE_APPLICATION_ERROR(-20001,'ERR!');
END IF;
END fast_point;
FUNCTION get_start_point(
p_input IN MDSYS.SDO_GEOMETRY
) RETURN MDSYS.SDO_GEOMETRY
AS
int_dims PLS_INTEGER;
int_gtyp PLS_INTEGER;
int_lrs PLS_INTEGER;
BEGIN
-- Step 10
-- Check over incoming parameters
IF p_input IS NULL
THEN
RETURN NULL;
END IF;
-- Step 20
-- Gather information about the geometry
int_dims := p_input.get_dims();
int_gtyp := p_input.get_gtype();
int_lrs := p_input.get_lrs_dim();
-- Step 30
-- Handle point and multipoint inputs
IF int_gtyp = 1
THEN
RETURN p_input;
ELSIF int_gtyp = 5
THEN
RETURN SDO_UTIL.EXTRACT(p_input,1);
END IF;
-- Step 40
-- Return results
IF int_dims = 2
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(1)
,p_input.SDO_ORDINATES(2)
,NULL
,NULL
,p_input.SDO_SRID
ELSIF int_dims = 3
AND int_lrs = 3
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(1)
,p_input.SDO_ORDINATES(2)
,NULL
,p_input.SDO_ORDINATES(3)
,p_input.SDO_SRID
ELSIF int_dims = 3
AND int_lrs = 0
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(1)
,p_input.SDO_ORDINATES(2)
,p_input.SDO_ORDINATES(3)
,NULL
,p_input.SDO_SRID
ELSIF int_dims = 4
AND int_lrs IN (4,0)
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(1)
,p_input.SDO_ORDINATES(2)
,p_input.SDO_ORDINATES(3)
,p_input.SDO_ORDINATES(4)
,p_input.SDO_SRID
ELSIF int_dims = 4
AND int_lrs = 3
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(1)
,p_input.SDO_ORDINATES(2)
,p_input.SDO_ORDINATES(4)
,p_input.SDO_ORDINATES(3)
,p_input.SDO_SRID
ELSE
RAISE_APPLICATION_ERROR(-20001,'ERR!');
END IF;
END get_start_point;
FUNCTION get_end_point(
p_input IN MDSYS.SDO_GEOMETRY
) RETURN MDSYS.SDO_GEOMETRY
AS
int_dims PLS_INTEGER;
int_gtyp PLS_INTEGER;
int_lrs PLS_INTEGER;
int_len PLS_INTEGER;
BEGIN
-- Step 10
-- Check over incoming parameters
IF p_input IS NULL
THEN
RETURN NULL;
END IF;
-- Step 20
-- Gather information about the geometry
int_dims := p_input.get_dims();
int_gtyp := p_input.get_gtype();
int_lrs := p_input.get_lrs_dim();
int_len := p_input.SDO_ORDINATES.COUNT();
-- Step 30
-- Handle point and multipoint inputs
IF int_gtyp = 1
THEN
RETURN p_input;
ELSIF int_gtyp = 5
THEN
RETURN SDO_UTIL.EXTRACT(
p_input
,SDO_UTIL.GETNUMELEM(p_input)
END IF;
-- Step 40
-- Return results
IF int_dims = 2
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(int_len - 1)
,p_input.SDO_ORDINATES(int_len)
,NULL
,NULL
,p_input.SDO_SRID
ELSIF int_dims = 3
AND int_lrs = 3
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(int_len - 2)
,p_input.SDO_ORDINATES(int_len - 1)
,NULL
,p_input.SDO_ORDINATES(int_len)
,p_input.SDO_SRID
ELSIF int_dims = 3
AND int_lrs = 0
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(int_len - 2)
,p_input.SDO_ORDINATES(int_len - 1)
,p_input.SDO_ORDINATES(int_len)
,NULL
,p_input.SDO_SRID
ELSIF int_dims = 4
AND int_lrs IN (4,0)
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(int_len - 3)
,p_input.SDO_ORDINATES(int_len - 2)
,p_input.SDO_ORDINATES(int_len - 1)
,p_input.SDO_ORDINATES(int_len)
,p_input.SDO_SRID
ELSIF int_dims = 4
AND int_lrs = 3
THEN
RETURN fast_point(
p_input.SDO_ORDINATES(int_len - 3)
,p_input.SDO_ORDINATES(int_len - 2)
,p_input.SDO_ORDINATES(int_len)
,p_input.SDO_ORDINATES(int_len - 1)
,p_input.SDO_SRID
ELSE
RAISE_APPLICATION_ERROR(-20001,'ERR!');
END IF;
END get_end_point;
FUNCTION is_spaghetti(
p_input IN MDSYS.SDO_GEOMETRY
,p_tolerance IN NUMBER DEFAULT 0.05
) RETURN VARCHAR2
AS
num_tolerance NUMBER := p_tolerance;
ary_strings MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
ary_starts MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
ary_ends MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
int_count PLS_INTEGER;
ary_start_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
ary_end_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
ary_inside_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
BEGIN
-- Step 10
-- Check over incoming parameters
IF p_input IS NULL
THEN
RETURN NULL;
ELSIF p_input.get_gtype = 2
THEN
RETURN 'FALSE';
ELSIF p_input.get_gtype <> 6
THEN
RAISE_APPLICATION_ERROR(-20001,'input gtype must be 2 or 6');
END IF;
IF num_tolerance IS NULL
THEN
num_tolerance := 0.05;
END IF;
-- Step 20
-- Break multistring into single linestrings with nodes
int_count := SDO_UTIL.GETNUMELEM(p_input);
ary_strings.EXTEND(int_count);
ary_starts.EXTEND(int_count);
ary_ends.EXTEND(int_count);
ary_start_count.EXTEND(int_count);
ary_end_count.EXTEND(int_count);
ary_inside_count.EXTEND(int_count);
FOR i IN 1 .. int_count
LOOP
ary_strings(i) := SDO_UTIL.EXTRACT(p_input,i);
ary_starts(i) := get_start_point(ary_strings(i));
ary_ends(i) := get_end_point(ary_strings(i));
END LOOP;
-- Step 30
-- Loop through and count the nodes connections
FOR i IN 1 .. int_count
LOOP
ary_start_count(i) := 0;
ary_end_count(i) := 0;
ary_inside_count(i) := 0;
FOR j IN 1 .. int_count
LOOP
IF i != j
THEN
IF SDO_GEOM.RELATE(
ary_starts(i),
'DETERMINE',
ary_strings(j),
num_tolerance
) IN ('TOUCH','CONTAINS','COVERS','ON')
THEN
ary_start_count(i) := ary_start_count(i) + 1;
ELSIF SDO_GEOM.RELATE(
ary_ends(i),
'DETERMINE',
ary_strings(j),
num_tolerance
) IN ('TOUCH','CONTAINS','COVERS','ON')
THEN
ary_end_count(i) := ary_end_count(i) + 1;
ELSIF SDO_GEOM.RELATE(
ary_strings(i),
'DETERMINE',
ary_strings(j),
num_tolerance
) IN ('TOUCH','CONTAINS','COVERS','OVERLAPBYINTERSECT')
THEN
ary_inside_count(i) := ary_inside_count(i) + 1;
END IF;
END IF;
END LOOP;
IF ary_start_count(i) > 1
OR ary_end_count(i) > 1
OR ary_inside_count(i) > 0
THEN
RETURN 'TRUE';
END IF;
END LOOP;
RETURN 'FALSE';
END is_spaghetti;
FUNCTION points2segment(
p_point_one IN MDSYS.SDO_POINT_TYPE
,p_point_two IN MDSYS.SDO_POINT_TYPE
,p_srid IN NUMBER
) RETURN MDSYS.SDO_GEOMETRY
AS
BEGIN
IF ( p_point_one.Z IS NULL AND p_point_two.Z IS NOT NULL )
OR ( p_point_one.Z IS NOT NULL AND p_point_two.Z IS NULL )
THEN
RAISE_APPLICATION_ERROR(
-20001,
'both points must have the same number of dimensions, point_one Z is ' ||
NVL(TO_CHAR(p_point_one.Z),'') ||
' and point_two Z is ' ||
NVL(TO_CHAR(p_point_two.Z),'')
END IF;
IF p_point_one.Z IS NULL
THEN
RETURN SDO_GEOMETRY(
2002
,p_srid
,NULL
,SDO_ELEM_INFO_ARRAY(1,2,1)
,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_two.X,p_point_two.Y)
ELSE
RETURN SDO_GEOMETRY(
3002
,p_srid
,NULL
,SDO_ELEM_INFO_ARRAY(1,2,1)
,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_one.Z,p_point_two.X,p_point_two.Y,p_point_two.Z)
END IF;
END points2segment;
FUNCTION points2segment(
p_point_one IN MDSYS.SDO_GEOMETRY
,p_point_two IN MDSYS.SDO_GEOMETRY
) RETURN MDSYS.SDO_GEOMETRY
AS
int_gtype1 PLS_INTEGER;
int_dims1 PLS_INTEGER;
int_gtype2 PLS_INTEGER;
int_dims2 PLS_INTEGER;
point_one MDSYS.SDO_POINT_TYPE;
point_two MDSYS.SDO_POINT_TYPE;
BEGIN
int_gtype1 := p_point_one.get_gtype();
int_dims1 := p_point_one.get_dims();
int_gtype2 := p_point_two.get_gtype();
int_dims2 := p_point_two.get_dims();
IF int_gtype1 = 1
AND int_gtype2 = 1
AND int_dims1 = int_dims2
AND p_point_one.SDO_SRID = p_point_two.SDO_SRID
THEN
NULL; -- Good
ELSE
RAISE_APPLICATION_ERROR(
-20001
,'both point objects must be points and have the same number of dimensions and SRIDs'
END IF;
IF int_dims1 = 4
THEN
RETURN SDO_GEOMETRY(
4402
,p_point_one.SDO_SRID
,NULL
,SDO_ELEM_INFO_ARRAY(1,2,1)
,SDO_ORDINATE_ARRAY(
p_point_one.SDO_ORDINATES(1)
,p_point_one.SDO_ORDINATES(2)
,p_point_one.SDO_ORDINATES(3)
,p_point_one.SDO_ORDINATES(4)
,p_point_two.SDO_ORDINATES(1)
,p_point_two.SDO_ORDINATES(2)
,p_point_two.SDO_ORDINATES(3)
,p_point_two.SDO_ORDINATES(4)
ELSE
-- Use the sdo_point_type method for the rest
IF p_point_one.SDO_POINT IS NOT NULL
THEN
point_one := p_point_one.SDO_POINT;
ELSE
IF int_dims1 = 3
THEN
point_one := SDO_POINT_TYPE(
p_point_one.SDO_ORDINATES(1)
,p_point_one.SDO_ORDINATES(2)
,p_point_one.SDO_ORDINATES(3)
ELSE
point_one := SDO_POINT_TYPE(
p_point_one.SDO_ORDINATES(1)
,p_point_one.SDO_ORDINATES(2)
,NULL
END IF;
END IF;
IF p_point_two.SDO_POINT IS NOT NULL
THEN
point_two := p_point_two.SDO_POINT;
ELSE
IF int_dims1 = 3
THEN
point_two := SDO_POINT_TYPE(
p_point_two.SDO_ORDINATES(1)
,p_point_two.SDO_ORDINATES(2)
,p_point_two.SDO_ORDINATES(3)
ELSE
point_two := SDO_POINT_TYPE(
p_point_two.SDO_ORDINATES(1)
,p_point_two.SDO_ORDINATES(2)
,NULL
END IF;
END IF;
RETURN points2segment(
p_point_one => point_one
,p_point_two => point_two
,p_srid => p_point_one.SDO_SRID
END IF;
END points2segment;
FUNCTION linear_gap_filler(
p_input IN MDSYS.SDO_GEOMETRY
,p_tolerance IN NUMBER DEFAULT 0.05
) RETURN MDSYS.SDO_GEOMETRY
AS
sdo_input MDSYS.SDO_GEOMETRY := p_input;
num_tolerance NUMBER;
int_counter PLS_INTEGER;
ary_edges MDSYS.SDO_GEOMETRY_ARRAY;
ary_starts MDSYS.SDO_GEOMETRY_ARRAY;
ary_ends MDSYS.SDO_GEOMETRY_ARRAY;
ary_nearest MDSYS.SDO_NUMBER_ARRAY;
ary_distance MDSYS.SDO_NUMBER_ARRAY;
num_temp NUMBER;
num_nearest NUMBER;
int_winner PLS_INTEGER;
int_winner2 PLS_INTEGER;
sdo_point1 MDSYS.SDO_GEOMETRY;
sdo_point2 MDSYS.SDO_GEOMETRY;
boo_done BOOLEAN;
num_one NUMBER;
num_two NUMBER;
int_looper PLS_INTEGER := 1;
BEGIN
-- Step 10
-- Check over incoming parameters
IF num_tolerance IS NULL
THEN
num_tolerance := 0.05;
END IF;
IF sdo_input IS NULL
OR sdo_input.get_gtype() <> 6
THEN
RETURN sdo_input;
END IF;
IF is_spaghetti(sdo_input,p_tolerance) = 'TRUE'
THEN
RETURN sdo_input;
END IF;
<> ary_edges := MDSYS.SDO_GEOMETRY_ARRAY();
ary_starts := MDSYS.SDO_GEOMETRY_ARRAY();
ary_ends := MDSYS.SDO_GEOMETRY_ARRAY();
ary_nearest := MDSYS.SDO_NUMBER_ARRAY();
ary_distance := MDSYS.SDO_NUMBER_ARRAY();
-- Step 20
-- Break multistring into edges and start and end nodes
int_counter := SDO_UTIL.GETNUMELEM(sdo_input);
ary_edges.EXTEND(int_counter);
ary_starts.EXTEND(int_counter);
ary_ends.EXTEND(int_counter);
FOR i IN 1 .. int_counter
LOOP
ary_edges(i) := SDO_UTIL.EXTRACT(sdo_input,i);
ary_starts(i) := get_start_point(ary_edges(i));
ary_ends(i) := get_end_point(ary_edges(i));
END LOOP;
-- Step 30
-- Determine the closest endpoints
ary_nearest.EXTEND(int_counter);
ary_distance.EXTEND(int_counter);
FOR i IN 1 .. int_counter
LOOP
num_nearest := NULL;
int_winner := NULL;
FOR j IN 1 .. int_counter
LOOP
IF j != i
THEN
num_temp := SDO_GEOM.SDO_DISTANCE(
ary_edges(i)
,ary_edges(j)
,num_tolerance
IF num_nearest IS NULL
OR num_temp < num_nearest
THEN
num_nearest := num_temp;
int_winner := j;
END IF;
END IF;
END LOOP;
ary_nearest(i) := int_winner;
ary_distance(i) := num_nearest;
END LOOP;
-- Step 40
-- Find the smallest gap
int_winner := NULL;
num_nearest := NULL;
FOR i IN 1 .. int_counter
LOOP
IF num_nearest IS NULL
OR ary_distance(i) < num_nearest
THEN
int_winner := i;
num_nearest := ary_distance(i);
int_winner2 := ary_nearest(i);
END IF;
END LOOP;
-- Step 50
-- Determine the endpoints to connect
num_one := SDO_GEOM.SDO_DISTANCE(
get_start_point(ary_edges(int_winner)),
ary_edges(int_winner2),
num_tolerance
num_two := SDO_GEOM.SDO_DISTANCE(
get_end_point(ary_edges(int_winner)),
ary_edges(int_winner2),
num_tolerance
IF ( num_one = 0 AND SDO_GEOM.RELATE(
get_start_point(ary_edges(int_winner)),
'ANYINTERACT',
ary_edges(int_winner2),
num_tolerance
) = 'TRUE' )
OR ( num_two = 0 AND SDO_GEOM.RELATE(
get_end_point(ary_edges(int_winner)),
'ANYINTERACT',
ary_edges(int_winner2),
num_tolerance
) = 'TRUE' )
THEN
sdo_point1 := NULL;
ELSIF num_one < num_two
THEN
sdo_point1 := get_start_point(ary_edges(int_winner));
ELSE
sdo_point1 := get_end_point(ary_edges(int_winner));
END IF;
num_one := SDO_GEOM.SDO_DISTANCE(
get_start_point(ary_edges(int_winner2)),
ary_edges(int_winner),
num_tolerance
num_two := SDO_GEOM.SDO_DISTANCE(
get_end_point(ary_edges(int_winner2)),
ary_edges(int_winner),
num_tolerance
IF ( num_one = 0 AND SDO_GEOM.RELATE(
get_start_point(ary_edges(int_winner2)),
'ANYINTERACT',
ary_edges(int_winner),
num_tolerance
) = 'TRUE' )
OR ( num_two = 0 AND SDO_GEOM.RELATE(
get_end_point(ary_edges(int_winner2)),
'ANYINTERACT',
ary_edges(int_winner),
num_tolerance
) = 'TRUE' )
THEN
sdo_point2 := NULL;
ELSIF num_one < num_two
THEN
sdo_point2 := get_start_point(ary_edges(int_winner2));
ELSE
sdo_point2 := get_end_point(ary_edges(int_winner2));
END IF;
-- Step 50
-- Smash together
IF sdo_point1 IS NULL
OR sdo_point2 IS NULL
THEN
sdo_input := SDO_UTIL.CONCAT_LINES(
ary_edges(int_winner),
ary_edges(int_winner2)
ELSE
sdo_input := SDO_UTIL.CONCAT_LINES(
SDO_UTIL.CONCAT_LINES(
ary_edges(int_winner),
points2segment(sdo_point1,sdo_point2)
ary_edges(int_winner2)
END IF;
boo_done := TRUE;
FOR i IN 1 .. int_counter
LOOP
IF i NOT IN (int_winner,int_winner2)
THEN
sdo_input := SDO_UTIL.APPEND(sdo_input,ary_edges(i));
boo_done := FALSE;
END IF;
END LOOP;
-- Step 60
-- Check if valid if returning
IF sdo_input.get_gtype() = 2
OR boo_done = TRUE
THEN
RETURN sdo_input;
END IF;
int_looper := int_looper + 1;
GOTO TOP_OF_IT;
END linear_gap_filler;
END dz_gap_fill;
Maybe you are looking for
-
Azure Deployment Errror with IISConfigurator.exe 2.5
Hi: I recently upgraded from Azure SDK 2.2 to 2.5. I have everything running OK locally in the compute and storage emulators. However, when I create a package and attempt to deploy to Azure, I get the following error: The file provided is not a val
-
Error in Agent Configuration assitant Step in OUI
Hi , it always fail at the same place can you help me ? Here is the ..../oraInventory/logs/installActions2009-04-02_09-08-47-AM.log thath I have INFO: Configuration assistant "OMS Configuration" succeeded INFO: Command = oracle.sysman.emcp.agent.Agen
-
Using SDK to create custom XMP panel in Bridge CS4
Using the SDK materials how exactly does one go about creating their own custom XMP panel for Bridge CS4? I feel like I'm getting close- I was able to copy the BasicControlSamplePanel folder from SDK to my local C drive @ C:\Documents and Settings\to
-
When I type a URL into the location bar, I have to click on the green arrow at the right end of the location bar for the new page to load. In previous versions of Firefox you just hit enter to load the new page.
-
Hello I am trying to update my iphone to get the new software and itunes will download the software but will not install. An error message pops up saying that my network needs to be changed?