Draft email copied content from one and sent in other

I have an employee here who had 2 drafts, both were replys to different emails with different subjects and different recipients. After completing one of the emails, they pressed send and that was that.
After getting back to the office, they noticed in their sent items that the sent email contained the full text of the other item in drafts below the content of the intended email. It was formatted as so:
<the intended email content was here>
On Jan 4, 2013, at 2:05 PM, "John Smith" <[email protected]> wrote:
Hi Bob,
Blah blah blah... <long email with many replys>
Everything from "On Jan 4, 2013, at 2:05 PM..." and onward was from the other draft.
Is this a known issue? Anyone ever run into this before?
This was with an Exchange email account on iPhone 5 at 6.0.2.

Found this thread from almost 3 years ago
https://discussions.apple.com/thread/2402352
Posts stopped in 2011, so it's possible this issue may have been addressed but cropped up again in 6.0.2.

Similar Messages

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

I have a new iMac and i created two libraries on iTunes. how do i copy songs from one library to the other?

I have a new imac. I created two libraries, one for me, one for my kids. how do I copy songs from one library to the other library?

Not easy unless you're just content with adding some files to the other as new files but lose playlists for those files, and playcount, and ratings, etc. If you're okay with that, you can drag the media folder from one library to the other. If you use default settings and want to duplicate the media, just drag it. If you want to add the media but leave it where it is currently located, hold down the option key while dragging to the library window.
Otherwise:
PowerTunes - http://www.fatcatsoftware.com/powertunes/ (commercial software)
syncOtunes - http://homepage.mac.com/oligrob/syncOtunes/syncOtunes.html

OSB : How can we copy actions from one project folder to other projects?

How can we copy actions from one project folder to other projects in OSB?
For eg:
I have a service call out action in Project1/proxySer1
I want to copy this to Project2/proxySer2.
Espicially, in our case error handling callout is common to all of our projects and we should be able to copy from one to another.
Edited by: user10367892 on Aug 20, 2009 12:28 PM

Thank you for the reply.
It was my fault. I was on two different servers, while i was doing this and so didn't work. But copy /past action works as you suggested.
Can I select multiple actions from one stage and paste to different proxy service? I have too many options to copy/paste and hence I have this question.
Is there any other way of copying all selected actions in one stage to another, but not the complete stage itselft?

How to copy data from one planning area to other planning area

Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then, i load the data from infocube to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
Chandu

Hi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh

How do i copy stickies from one mac to the other

how do i copy stickies from one mac to the other?
or are they stored in a file i can just copy them over ? if so what is the file name path?
thanks in advance

yes, they are stored in the file /users/username/library/StickiesDatabase. just copy it over to the corresponding location on the new computer.

IPOD 4GB can i copy music from one IPOD to the other

I have tried doing this but it comes up with your not authorised .

You can't copy directly from one iPod to another, the songs have to be transferred to iTunes first and your second iPod is updated from there. The transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
tt2

Copy values from one Parent node to other Parent Node

Hi all,
I have a 2 Parent node each having 3 child nodes. I want to copy the values of all the attributes of all the child nodes of one Parent Node to corresponding other node.
Both the Parent Nodes as well as their Child Nodes have different name but their attributes have same name.For ex:
Parent Node -A
Child Nodes - a, b,c
Child Node "a" has attributes "x" and "y"
Parent Node -B
Child Nodes - d,e,f
Child Node "d" has attributes "x" and "y" .
Now I want to copy the values od attributes "x" and "y" from one Parent Node to other Parent node.
Please help me out.
Helpful answers will be rewarded.
Thanxs in advance...

Hi Jin,
To use copy service API, u need to satisfy 2 condition for the attributes of source node and target node:
1. The name of the attribute should be same (including the case of the name)- Abc is different from ABC
2. Type of the attribute should also be the same.
copy elements works for copying values from Model node to context and does not work vice-versa. To enable the copying of context node to model node, use copycorresponding API.
Eg:
int contextNodeSize = wdContext().node<contextNodeName>().size();
for(int i = 0; i < contextNodeSize; i++)
     <modelNodeName> modelObject = new <modelNodeName>();
     <contextNodeName>Element contextObject = wdContext().node<contextNodeName>().get<contextNodeName>ElementAt(i);
     WDCopyService.copyCorresponding(contextObject, modelObject);
This will copy the values from Context Node to Model Node.
Hope this helps you.
Regards,
Poojith MV

Copying Queries from one infoset to the other with variants

Hello Gurus,
I have two infosets (A & B) based on logical database PNPCE. Infoset A & B are exactly the same. Now, I want to copy the queries of infoset A to infoset B.
I am unable to copy the queries with variants. And I am getting following message:
Error when copying query report XXXXXXX= with variants. Error when importing query
FYI, I am able to copy the queries without variants successfully, using 'Sap Query: Special Copy Functions'.
Any help on this would be much appreciated.
Thanks,
Ikram

I think you are right. I see now that I am overcomplicating things.
To answer your question, no I do not add any color adjustments to the individual compound clips. I double click into the compound clips and make color adjustments to each of the angles from the multicam clip. When copying a clip made from the same multi cam clip from one project to another, any color adjustments made to the angles of that multicam clip that was copied over from the other project, does not carry over to the same multicam clips to the new project it was copied to - even if you break the compound clip apart to just the multicam clip, at least that's what I've noticed.
But as you said, the easier thing to do, and this makes total sense now, would be create your multicam clip, and use keywords to label the parts in the browser, then drag the clips to the timeline as you need them. I'm assuming that the color corrections you apply to the angles on the timeline will be automatically applied to new keyword clips you drag to the timeline? Also, to name those multicam clips on the timelines, would you use markers? Is this correct?
I really need to watch a few online tutorials on compound clips, but what Luis said has really cleared things up for me.
Thanks so much for your help and patience guys!

Best way to copy table from one database to any other database

I need to write an application to perform database table copy from one kind of database to another kind of database.
I just wrote a simple JDBC program which essentially does the something like below:
PreparedStatement statement = null;
ResultSet rs = null;
try
System.out.println("insertSQL:" + insertSQL.toString());
statement = target.prepareStatement(insertSQL.toString());
System.out.println("selectSQL:" + selectSQL.toString());
rs = source.executeQuery(selectSQL.toString());
int rows = 0;
while (rs.next())
rows++;
for (int i = 1; i <= columns.size(); i++)
statement.setString(i, rs.getString(i));
statement.execute();
System.out.println("Copied " + rows + " rows.");
But problem with this one is that it takes lot of time( more than 60 mins) for 100k records transfer. Would there be any faster way to do this?
TIA...

Thanks...
I am using now batch update mechanism and set the fetchsize of resultSet cursor.
Now I need to copy a table with almost 10 million records to the target database. My program works fine but it takes more than 3 hours.
I am copying from Postgres table to MS SQL server table.
Is there any other way or more better appraoch to make this more faster?
TIA..

Help needed to Copy Queries from one User Favorites to other

Hi Experts,
We have one requirement to copy Queries from favorites of one user to other,But issue that while i am trying this in sandbox for any new user it is working with SE 37 Function module -FAVOS_EVENT_ADD_TO_USER_SHELF Approach then Queries are visble on Favorites on USER MENU.
And for any other existing user if we use this Function Module ,Queries saved to fav are not visible in USER MENU screen although it is visible in TABLE SMEN_BUFFC.
Please advice on this.
Thanks
Nilesh

Hi,
Use FNDLOAD.
Note: 364558.1 - How To Use FNDLOAD To Download Responsibilities With All Security Groups, Not Just STANDARD
Note: 735338.1 - Tips About FNDLOAD
FNDLOAD responsibility
FNDLOAD responsibility
use FNDLOAD to download the profile setup for a responsibility
use FNDLOAD to download the profile setup for a responsibility
Thanks,
Hussein

Copying content from one frame to another frame

Hi All,
In my application, i want popup frame to enter the values when clicking the mouse(Double Click). I open the new frame by using the following code
JFrame frame = new NewJFrame("PopUp Frame");
frame.setDefaultCloseOperation(JFrame.HIDE_ON_CLOSE);
JLabel label = new JLabel("PopUp Frame");
//Create and set up the content pane.
frame.getContentPane().add(label);
frame.setResizable(false);
//Display the window.
frame.pack();
frame.setVisible(true);
In this new frame if i entered the value in the textbox how can i take it in the main screen where the mouseclicked to open this new frame?
Please if anyone know give the solution.

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
i want popup frameIt's better to use a modal JDialog. A GUI application should normally have only one JFrame.
In this new frame if i entered the value in the textboxWhat's a textbox?
db
edit It's not polite to post a new question without replying to a response on an earlier one.
[http://forums.sun.com/thread.jspa?threadID=5395152]
Edited by: DarrylBurke

Copy permissions from one resource to the other

Hello guys,
I implemented a new UICommand that opens an popup with inputfield.
That input will be used to create a new folder named as the input value and copy a template folder (with other child folders) to that folder (with all properties and layoutSet).
It's a kind of "copy command" but that will take a template folder that we save somewhere else and copy all the content under the new created folder. My concern is how can I copy the permissions to those folders?
If I'm right the copy function on an IResource only sets the properties, the children and links but doens't handle permissions.
So how can I achieve to copy the permission for a folder and its children.
Thanks for your help,
Sunny regards,
Thomas

Ok I don't look further to this.
I will use the inheritance of permissions to resolve that problem.
Thomas

Copying methods from one component controller to other ?

Hi,
I have many methods in one component controller, which i wish to copy to another component controller through standard buttons. When i try to copy them, it says 'The method or methods are copied to the clipboard'. But, i was unable to copy them to another component's componentcontroller. It says as 'The clipboard' doesnot contain data. Can someone help me in providing solution in copying all the methods in one shot to other ?
Thanks & Regards,
Gaurav.

Hi,
I think You are trying it to paste after making new method in the other component directly with the help of Cntrl+V
I am able to do same by using copy and paste buttons.
First go to method tab and copy it then go in methods tab in which you want to paste click where we create for new method and click standard button for paste.
By this way the name of the methods will be same. But if you want that you can rename it.
I hope it helps.
Regards,
Rohit

Draft email copied content from one and sent in other

Similar Messages

Maybe you are looking for