Dreamweaver.setUpFindReplace() and the Greek Alphabet

I've set up a script to clean up special characters with the following:
var counter = 0;
while (counter < autofind.length) {
//get a value to find
var autofindstring = autofind[counter].toString()
//get a value to replace
var autorepstring = autorep[counter].toString()
dreamweaver.setUpFindReplace({searchString: autofindstring, replaceString: autorepstring, searchSource: true, ignoreWhitespace: true, matchCase: true});
dreamweaver.replaceAll();
counter++
This is calling from 2 arrays - autofind and autorep. Autofind contains raw special characters, and autorep their &#** replacements.
The trouble I'm having is getting Dreamweaver to understand the difference between uppercase and lowercase Greek letters. For example:
autofind[112] = "α"
autofind[146] = "Α"
autorep[112] = "\&#945;"
autorep[146] = "\&#913;"
replaces Α α with &#945; &#945; (α α).
So it appears that Dreamweaver does not understand that the Greek Alphabet has upper and lower case - or recognize that Α and α are different characters. Any ideas on how to get this script to work? It's handling all other special characters well - the only problem is with the Greek alphabet.

Hi John,
AppleWorks is an old application, and can use only Mac Roman encoded fonts. Most of the fonts supplied with current Macs are Unicode encoded, and cannot be used in AppleWorks. Character Palette will show all the characters, and will report the Unicode character number for Unicode encoded characters.
There are a few Greek letters available in some standard font sets, and you can see these and the key combination necessary to achieve them in Keyboard Viewer.
Beyond thise, your choices are to find a downloadable Greek font with Mac Roman encoding, or to move your scientific work to a newer application.
Regards,
Barry

Similar Messages

  • How can I use the Greek alphabet in Appleworks?

    I need occasional Greek letters for scientific writing, and I usually use Appleworks 6.2.9 for word processing. I have activated the Greek alphabet through my iMac's Character Palette and can use it TextEdit, but not in Appleworks. Nor can I cut and paste Greek letters from TextEdit to Appleworks - they transpose as question marks. Anyone know of a solution?

    Hi John,
    AppleWorks is an old application, and can use only Mac Roman encoded fonts. Most of the fonts supplied with current Macs are Unicode encoded, and cannot be used in AppleWorks. Character Palette will show all the characters, and will report the Unicode character number for Unicode encoded characters.
    There are a few Greek letters available in some standard font sets, and you can see these and the key combination necessary to achieve them in Keyboard Viewer.
    Beyond thise, your choices are to find a downloadable Greek font with Mac Roman encoding, or to move your scientific work to a newer application.
    Regards,
    Barry

  • When a html coded page requires the Windows Symbol font, Firefox does not call it, and the English alphabet characters display instead. How can I get the Symbol font to work when the page is loaded in Firefox??

    ''duplicate of https://support.mozilla.com/en-US/questions/902677''
    This site shows Greek letters and Greek words by calling for the Windows Symbol font. The page(s) involved display correctly in Internet Explorer, but not in Firefox 3.6.1 or 8.1. In Firefox, the Greek letter does not appear, it is just replaced with the English letter for the equivalent keystroke. Here is a html line that ought to cause Symbol's Greek letter lowercase alpha to be displayed, but all you get is an "a" :
    (td width="60")(p align="center")(big)(strong)(font face="Symbol")(span style="font-family: , Symbol")a(/span)(/font)(/strong)(/big)(/td)
    **I have had to replace the left and right carets with left and right parentheses. Otherwise, the line actually executes, disappears, and just leaves a bolded "a" on the next line.***

    Reemphasizing, the page code works on Internet Explorer. It does _not_ work with Firefox ver 3.6.1 nor ver 8.0.1 (which I upgraded to, to see if that would solve the problem). The MDC FAQ solution is not a solution, because it forces the html coder to change his language just to accommodate Firefox. Firefox needs to change to conform to standards.
    What did work was that I followed the solution offered on:
    http://hutchinson.belmont.ma.us/tth/firefox3.html
    "How to reenable symbol font in Firefox 3 on Windows"
    <b>**********Solution*********</b>
    Download the file:
    http://hutchinson.belmont.ma.us/tth/symbol8859.otf
    Go to Control Panel/Fonts/Install New Font
    Install the font that was downloaded.
    <b>************Problem Solved*********</b>
    I think Firefox wants you to use _its_ font faces, not the standard Windows fonts. They do not have a Symbol font to replace the Windows TTF, I guess.

  • Confused With Dreamweaver CC and the CSS Styles Panel!

    Hi all
    I'm relativley new to the CC but I'm having alot of fun learning how to use dreamweaver, But now comes where I get confused. I'm learning from Lynda.com "Dreamweaver and WordPres Core Concepts" and as I follow the tutorial regarding the actual structure of wordpress themes I have different panels to the tutour.
    As you can see from the pics I have a different set up and this makes it very hard to follow the tutour.
    I have tried the windows menu but there is no CSS Style Panel, plus I have media, sources, selectors, and properties. Apparently the tutour is also usin CC.
    Can someone please guide me on how to learn dreamweaver with up to date tutourials....

    I'm not familiar with the Dreamweaver/WordPress videos on lynda.com, but if the tutorials are showing the CSS Styles panel, it means that it was recorded on Dreamweaver CS6 or earlier.
    The CSS Designer panel replaces the old CSS Styles panel in DW CC. Since you have access to lynda.com, I suggest that you take a look at James Williamson's CSS Designer overview in Dreamweaver CC Essential Training.

  • HELP! I have purchased Dreamweaver CS4 and the installer freezes after 80-90% as it is 'checking system profiles'

    I downloaded the trail version, and had the same problem and never got it to work. Like an idiot I thought if I bought it I would get a better version to download but I am having the same problem. I am frustrated hurt and angry the Adobe has not been able to solve this problem because I have googled this issue and it seems that I am not the only one that has had this problem. Please anyone help me. I have tried everything that they have told me and it is not working and I have a project due monday. 

    I did what you told me and looked in the library log to see what is going on as it check system profiles. It appears to be stuck inside a loop. The following loop message appears over and over again. Any suggestions?
    Log of: string
    0 {LOOP}: Reference to object up 0
    CAPS_28B98837_8526_4159_B4E7_D0FD5E235960.Payload42 {string}: {C346D126-437D-4CCC-854E-5B19D832C8D7}
    Log of: string
    0 {string}: {
    Log of: string
    0 {LOOP}: Reference to object up 0
    1 {string}: C
    Log of: string
    0 {LOOP}: Reference to object up 0
    2 {string}: 3
    Log of: string
    0 {LOOP}: Reference to object up 0
    3 {string}: 4
    Log of: string
    0 {LOOP}: Reference to object up 0
    4 {string}: 6
    Log of: string
    0 {LOOP}: Reference to object up 0
    5 {string}: D
    Log of: string
    0 {LOOP}: Reference to object up 0
    6 {string}: 1
    Log of: string
    0 {LOOP}: Reference to object up 0
    7 {string}: 2
    Log of: string
    0 {LOOP}: Reference to object up 0
    8 {string}: 6
    Log of: string
    0 {LOOP}: Reference to object up 0
    9 {string}: -
    Log of: string
    0 {LOOP}: Reference to object up 0
    10 {string}: 4
    Log of: string
    0 {LOOP}: Reference to object up 0
    11 {string}: 3
    Log of: string
    0 {LOOP}: Reference to object up 0
    12 {string}: 7
    Log of: string
    0 {LOOP}: Reference to object up 0
    13 {string}: D
    Log of: string
    0 {LOOP}: Reference to object up 0
    14 {string}: -
    Log of: string
    0 {LOOP}: Reference to object up 0
    15 {string}: 4
    Log of: string
    0 {LOOP}: Reference to object up 0
    16 {string}: C
    Log of: string
    0 {LOOP}: Reference to object up 0
    17 {string}: C
    Log of: string
    0 {LOOP}: Reference to object up 0
    18 {string}: C
    Log of: string
    0 {LOOP}: Reference to object up 0
    19 {string}: -
    Log of: string
    0 {LOOP}: Reference to object up 0
    20 {string}: 8
    Log of: string
    0 {LOOP}: Reference to object up 0
    21 {string}: 5
    Log of: string
    0 {LOOP}: Reference to object up 0
    22 {string}: 4
    Log of: string
    0 {LOOP}: Reference to object up 0
    23 {string}: E
    Log of: string
    0 {LOOP}: Reference to object up 0
    24 {string}: -
    Log of: string
    0 {LOOP}: Reference to object up 0
    25 {string}: 5
    Log of: string
    0 {LOOP}: Reference to object up 0
    26 {string}: B
    Log of: string
    0 {LOOP}: Reference to object up 0
    27 {string}: 1
    Log of: string
    0 {LOOP}: Reference to object up 0
    28 {string}: 9
    Log of: string
    0 {LOOP}: Reference to object up 0
    29 {string}: D
    Log of: string
    0 {LOOP}: Reference to object up 0
    30 {string}: 8
    Log of: string
    0 {LOOP}: Reference to object up 0
    31 {string}: 3
    Log of: string
    0 {LOOP}: Reference to object up 0
    32 {string}: 2
    Log of: string
    0 {LOOP}: Reference to object up 0
    33 {string}: C
    Log of: string
    0 {LOOP}: Reference to object up 0
    34 {string}: 8
    Log of: string
    0 {LOOP}: Reference to object up 0
    35 {string}: D
    Log of: string
    0 {LOOP}: Reference to object up 0
    36 {string}: 7
    Log of: string
    0 {LOOP}: Reference to object up 0
    37 {string}: }
    Log of: string

  • My iphone lost all of its data and when i connect to itunes, itunes won't take the greek passcode after i have done the full reset, so now i cant restore my files that i have on the computer. HELP PLEASE!

    So I accidentaly messed up my files, and the greek passcode won't register on Itunes like the numerical passcode did. How am I to get into my phone thru itunes? Is there a way for me to take the greek from a website and copy and paste into the passcode, because i tried it and it didn't work. Someone please help.

    Your content will only be where you put it.  It has always been very basic to always maintain a backup copy of your computer.
    You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
    You can import your pics taken with the iphone as you would with any digital camera.
    You can e-mail the other pics to yourself, they will never be of the original quality.
    You can out a unique contact and calendar entry on the computer.  You should get the option to merge the data when you sync.

  • While using bluetooth wireless on iPad, it stalls and the on screen keyboard comes up.

    I just bought my iPad 2 about two weeks ago. Before that I was playing around with my parent's iPad first generation.
    For both iPads, I have the same problems while using the same wireless keyboard on both of them.
    1. While typing, at random times the wireless keyboard stops responding and the on screen keyboard shows up.
    2. While typing, also at random times, the wireless keyboard stops responding and the same alphabet that I last typed in would multiply itself until I either press "command + A" and delete or lock my parent's iPad and iPad 2.
    3. While typing, my wireless keyboard stops responding, on screen keyboard shows up, I select my on screen keyboard to hide, continued typing on the wireless keyboard, it stops responding again and my iPad2 restarts in a split second with the black backdrop and apple logo in the middle and goes to lock screen. Then everything is fine.
    4. While not typing, on screen keyboard shows up at random times while bluetooth is paired to wireless keyboard and then goes back down, all this while bluetooth icon at the top screen of the iPad2 flashes.
    I don't know what is wrong. At first I thought my iPad 2 has a problem but when I remembered the same problems occurred on my parent's iPad first generation, I don't know if it is just my keyboard or the iPad(s) have a problem.
    Please help me!

    If this is only one specific app, it is a problem with that application's programming.
    You can try to reset your iPad by holding down both the Home and Lock buttons for approximately 15 seconds or until the device restarts while ignoring the power slider.
    HuskieN

  • Dreamweaver crashed and would not reopen. Uninstalled, and re-installed and still will not open files or open any start options.

    When I would use command + Z more than 2 times in a row, Dreamweaver would crash. It generally would just start back up. This time it did not. I looked on many forums and tried a bunch of things from restarting the computer, to un/re-installing the program. One forum told me to clear the cache but when i follow the folders in finder, half of them don't even exist.
    When I try to open the program after reinstalling it, the icon will only jump once, and this appears in the corner: but no other options to open anything.
    Has anyone else come across this and found a solution?

    Yes. Can you please tell us the Dreamweaver version and the OS you are working on.
    Thanks!
    Kusha

  • Trying to write greek alphabet to g2d

    I'm trying to create a little exercise that will write the greek alphabet on a Graphics2D. Unfortunately the g2d seems to be using the latin0 character map. Is there a way to make it use ISO-8859-7 character set? (BTW, the problem is a little more broad than it sounds. I cannot currently display Russian or other characters).
    Thanks
    j_alan

    I suspect you need to understand how Java uses unicode (see the Character documentation, but in short: not all (in fact most) Unicode character don't fit in a primitive char.
    import java.awt.Dimension;
    import java.awt.EventQueue;
    import java.awt.Font;
    import java.awt.Graphics;
    import java.awt.Graphics2D;
    import java.awt.Rectangle;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JScrollPane;
    public class PaintText extends JPanel {
        private final Font theFont = new Font("Times New Roman", Font.PLAIN, 18);
        private final String text;
        public PaintText() {
            setPreferredSize(new Dimension(Short.MAX_VALUE, Short.MAX_VALUE));
            StringBuffer res = new StringBuffer();
            // See Character
            for (int i = 0x0000; i < 0x10FFFF; i++) {
                if (theFont.canDisplay(i)) {
                    res.append(Character.toChars(i)).append(' ');
            text = res.toString();
        private void paintString(Graphics2D g2d, int x, int y, String theString) {
            int lineHeight = theFont.getSize() + 15;
            char[] stringArray = theString.toCharArray();
            Rectangle bounds = g2d.getClipBounds();
            g2d.setFont(theFont);
            int max = stringArray.length - 50;
            for (int i = 0; i < max; i += 50) {
                if(y > bounds.y + bounds.height + lineHeight) {
                    return;
                else if(y >= bounds.y - lineHeight) {
                    g2d.drawChars(stringArray, i, 50, x, y);
                y += lineHeight;
            // print the last part.
            g2d.drawChars(stringArray, theString.length() / 50 * 50, theString.length() % 50, x, y);
        @Override
        public void paintComponent(Graphics g) {
            super.paintComponent(g);
            Graphics2D g2d = (Graphics2D) g;
            paintString(g2d, 20, 20, text);
        public static void main(String[] args) {
            EventQueue.invokeLater(new Runnable() {
                @Override
                public void run() {
                    JFrame frame = new JFrame("Test");
                    frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
                    frame.getContentPane().add(new JScrollPane(new PaintText()));
                    frame.setPreferredSize(new Dimension(800, 600));
                    frame.pack();
                    frame.setLocationRelativeTo(null);
                    frame.setVisible(true);
    }

  • Dreamweaver CS3 and using keyboard shortcut to preview in browser

    Hello,
    I am currently using Dreamweaver CS3 and the shortcut to preview work in the browser is Command - F12. The problem is, I'm using the Apple keyboard and when I click that, the volume of the system changes.
    I've tried Control, Command, Command+Control, etc, and F12 and nothing works. Any suggestions? Thanks.

    fnOptionF12 will work.
    fn tells the keyboard to send the F-xx instead of the special function.
    And like I said there is an option in the System Preference to reverse the use of fn and make the F-xx keys work as F-xx instead of the special function.

  • I had put a greek keybooard up on my Ipod 5th gen, then changed my password to a greek word, yesterday I took the greek keyboard off and didn't change my password, so I now can't get into my Ipod. If any one could help me that would be grea

    I have an Ipod 5th gen, I added a keyboard which was greek, I had changed my password to a greek short sentence. But the decided to take the greek keyboard off as I didn't use it often, so there was no point in having it. But I forgot to change my password, so I can't enter my Ipod. I've tried to enter the password in English and its not working! I don't really want to restart it all because I will loose everything! If anyone could help that would be great thank you.

    Connect the iOS device to your computer and try to make a backup. Yo shld be able to make a backup if you previously syncing to this computer.
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

  • The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

    I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
    it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
    HELP!!! THIS IS IMPORTANT.

    pixlor:
    OP is using CS3 and the menu blog is talking about the menus
    in earlier
    versions of FW, so *most* of the points made in the blog
    don't apply.
    That's not to say that using CS3 pop-up menus is a *good*
    thing....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "pixlor" <[email protected]> wrote in
    message
    news:gbce7b$a50$[email protected]..
    >
    quote:
    Originally posted by:
    captainbianco
    > I agree completely and totally, and I will haha but I'd
    like to get this
    > one
    > fixed if I can. You can view the page here
    >
    http://www.flooringanswers.com/nysurfaces/index2.htm
    > Hover over the letters to see the pop-up menu's. The one
    over "t" is the
    > problem.
    > Under Flooring, for example, you have a div with id of
    > MMMenu0910163730_1_1
    > (ugh). Under that are four items and they have their own
    IDs:
    > MMMenu0910163730_1_1_Item_0
    > MMMenu0910163730_1_1_Item_1
    > MMMenu0910163730_1_1_Item_2
    > MMMenu0910163730_1_1_Item_3
    > MMMenu0910163730_1_1_Item_4
    >
    > Your CSS file, however, doesn't have location
    information for the ..Item_4
    > object.
    >
    > That's just from a quick, cursory look. In order to fix
    this, you're going
    > to
    > have to go through it line by line and debug it. By the
    time you do this,
    > you
    > might be better off getting something else and starting
    from scratch.
    >
    > Read this:
    >
    http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
    >

  • I got a new computer and have reinstalled Dreamweaver.  I don't need to set up a new site, just need to set up reinstalled Dreamweaver to manage the old site on the company server. Does anyone have a step by step walkthrough for doing this?

    The site files are on our server and I can still access them.  I was not the one who installed and set up Dreamweaver initially and don't know very much about the program  Just enough to manage our simple site and keep it updated.  Just need help setting it up so that it's back to managing our website. 

    Go to Site > New Site and define your site.  See screenshots:
    Servers:  Enter your FTP log-in credentials and remote server's root directory.  If unsure, check with your hosting provider for details. 
    Click on TEST button.  If you're unable to connect, click the More Options triangle.
    Nancy O.

  • How does one add a photo gallery to my web site in Dreamweaver CS5 and have the link recognized as a destination file?

    How does on add a photo gallery to a web site in Dreamweaver CS5 and have the file folder which contains the photos, recognized as the "go to location" for the link up?

    Ok.  So Photos1.htm is the main gallery page.
    And it looks like you have sub-folders with images in them like these from 2011 and 2010
    LLA Picnic 2011/
    photos 2010/
    Have you defined a site in DW yet?   That's a critical first step in getting DW to recognize your site's links and other assets.  See video below:
    GS-01: Defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV
    Nancy O.

Maybe you are looking for