Drill down on all values of a row from bex universe

Hi
We had developed BO universe on bex query, and as in web i the whole row will come as a single object.
so when we drill on the row the drill is not performing on the whole row rather its happenig on a single value of the row
Ex:- if we have rows named as US, china, America, Japan, Gross sales, invoice etc
when wen i drill on any row for lets say US, and i drilled on currecy type the drill is happening only us from the row.
But we need this drill on whole values of the row,
if aware of bex analyser, we need the same drill down future as in bex.
Any help in this regards is appreciable.
Thanks in Advance,

Hi,
Your code seems to be right.
Try writing the code as the below format.
CASE SY-UCOMM.
* CHECK FUNCTION CODE
WHEN '&IC1'.
* CHECK FIELD CLICKED ON WITHIN ALVGRID REPORT
IF SELFIELD-FIELDNAME = 'LIFNR'.
* READ DATA TABLE, USING INDEX ROW USER CLICKED ON
READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
* SET PARAMETER ID FOR TRANSACTION SCREEN FIELD
SET PARAMETER ID 'BES' FIELD WA_FINAL-LIFNR.
* EXECUTE TRANSACTION 'XK03',AND SKIP INITIAL DATA ENTRY SCREEN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
Thanks
Arbind

Similar Messages

BPC 7.5 MS Drill Down works on one dimension in rows but not the other

Good day,
Working in BPC 7.5 MS. I have a piped report with 3 dimensions in rows. Members in the first dimension are hard-coded in the expand range. The second dimension is a combination of SELF and DEP members. The third is set to SELF. In our original AppSet, I can double-click drill down on both the second and third dimensions without issue.
I've re-created this report in a new AppSet (same BPC version). All settings are essentially identical (I've double and triple checked). The drill down works on the second dimension, but not the third. I've run out of places to look to find the problem. Any thoughts?
Thanks in advance.
Kim

It took a while but I finally found some quiet time to re-visit this issue. Thank you for the suggestions above. Ultimately I verified that the hierarchy, member selection and tables were all ok.
My next step was to create a new EVDRE with the same members and slowly factor in the piping, membersets, etc. Drill down worked appropriately. So that told me something else was at work.
Turns out the problem was with one of the 'display' columns to the right of the row key range. These columns use formulas to display a triangle if the member isn't calc, thus giving the end user a visual clue that you can drill down on the member. Long story short, BPC just didn't like that formula. A minor change (along with some conditional formatting to replace the piece of formula that was removed) eliminated the problem. Drill down is now working.

Two different drill down based on values in rtf

Hi All,
For a column in rtf, can we have multiple drill down path based on the values of the column. For example, if the value is > 10,000 navigate( hyperlink) to Report A otherwise navigate(hyperlink) to Report B.
In obiee answer in action link we can put condition, but in BI Publisher using rtf is there a way to perform multiple drill down for same column.
Thanks,
Sushil

Thanks for your kind reply.
where to create conditional hyperlink in rtf. When we insert hyperlink we just place the url. I have a sample column1 with three values A , B and C. If the value is A then display www.google.com and if value is B then display www.yahoo.com and if value is C then display nothing. Where we place the condition while inserting the hyperlink in rtf.
Thanks,
Sushil

Drill down to all screens of XK03 in ALV report from CALL TRANSACTION

HI!
I have created a vendor master report which calls the XK03 transaction when the vendor is clicked on on the ALV output. It takes me to the XK03 address screen and when I try clicking to go to the next screen it says the last screen is reached , 'Do you wnat to cancell processing'. I want to enable the program to goto the next screens as well like the controll screen and the accounting screen ect in my drill down on call transaction.
following si my code section which does it.
CASE rs_selfield-fieldname.
        WHEN 'LIFNR'.
*       Set parameter ID for transaction screen field
          CHECK NOT wa_vend-lifnr IS INITIAL.
          SET PARAMETER ID 'LIF' FIELD wa_vend-lifnr.
          SET PARAMETER ID 'BUK' FIELD wa_vend-bukrs.
          SET PARAMETER ID 'EKO' FIELD wa_vend-ekorg.
          SET PARAMETER ID 'KDY' FIELD kdy_val.
          CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN. "EC needed
ENDCASE.
ENDCASE.
Thanks and regards,
Aarav

Hi,
Your code seems to be right.
Try writing the code as the below format.
CASE SY-UCOMM.
* CHECK FUNCTION CODE
WHEN '&IC1'.
* CHECK FIELD CLICKED ON WITHIN ALVGRID REPORT
IF SELFIELD-FIELDNAME = 'LIFNR'.
* READ DATA TABLE, USING INDEX ROW USER CLICKED ON
READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
* SET PARAMETER ID FOR TRANSACTION SCREEN FIELD
SET PARAMETER ID 'BES' FIELD WA_FINAL-LIFNR.
* EXECUTE TRANSACTION 'XK03',AND SKIP INITIAL DATA ENTRY SCREEN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
Thanks
Arbind

Diplaying matrix with drill down (toggle visibility) enabled for 4 row groups

Hello,
I have a matrix in SSRS 2012 with 4 row groups representing a product hierarchy. Product Sub Group, Product, Sub Product and Account Number are the levels of the hierarchy. I have enabled drill down (toggle item visibility) on the first
3 of these levels.
This works great, but my matrix is very wide when it is first rendered. Ideally I want my matrix to expand horizontally as I expand/drill down into each grouping. So when the report is first rendered, and 3 of the groups are invisible, the
matrix will be thin. Is this possible?
Thanks,
Gabe

Hi Gabe,
Based on my test, it cannot achieved in SQL Server Reporting Services (SSRS).
We can hide these column contents in matrix, however, we cannot hide the space in the report. In this situation, I recommend you use table to display these data.
Alternative, we can add a drill-down in the column group to hide the column group when it is first rendered. Please refer to the following screenshot:
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Unable to utilize Drill-Down for all Filtered Dates in Xcelsius Engage 2008

Iu2019m very new to the Xcelsius Engage 2008 product and donu2019t understand what is needed to correct the drill-down problem encountered in a newly created dashboard.
The issue is with Drill-Down from a filtered chart. For some reason, I am unable to correctly pick any data item from the chart located top of workspace to drill-down to the lower chart when selecting a month beyond Jan u201911.
Iu2019ve unhidden the Label Based Menu, List Box 1 and List Box 2 during attempt to find out why I am unable to drill-down when I select a month other than Jan u201911. As youu2019ll see, when you u2018manuallyu2019 click in the unhidden List Box 2, the bottom chart is displaying the correct data.
Also - new to post for this forum - is there a way to attached the XLF to help with visual support to the problem?
Thank you,
Deborah

Hi there and welcome.
First troubleshooting step is to add a spreadsheet component to your canvas so you can watch what's happening. Second, have a look at this step-by-step to make sure you're not missing any steps. http://blog.davidg.com.au/2011/04/xcelsius-interactivity-chart-drill-down.html
Can you select only Jan '11? Or only up to Jan '11? Are you selecting whole months or days?
Assuming that your second chart is filtering for this date, I would check that the formatting is correct. Try, for example, removing all formatting so that you're seeing 40668 instead of a date. Does that work?
Also, it can be helpful to post your version number. This can be found under Help > About Xcelsius and will something like 5.3.5.0

Drill down with all other records

Hi, All
how can I see all other records after drilling down but not only record wich i drilled into?
i mean drilling like it works in Discoverer or in other words i'd like some records to be expanded and all other collapsed. Does anybody know whether it is possible?
Thanks in advance
Message was edited by:
altimer

NO, it's not, but anything requiring a major UI overhaul would require some parsing-wrapping with some server-side scripting (like you could wrap it around a php-script - but again - this is a long shot plus you'd have problems with support in case something goes awry). I've seen at someone's blog that such functionality might be released later. For now, the best thing to do would be designing your Dashboards around it. Also, have you looked at Siebel CRM? Because last time I checked - there was something like that there - and you can integrate BI to CRM (at least you could a few years ago).

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to drill down the cause of "SQL*Net message from/to client"

Pretty frustrated with my tune up using suggestions from many papers for Oracle 10g R2 on AIX 5.3 L system. My users told me that the system (including Baan 5c) still responds slowly in some processes, some even worsen.
Using both queries such as
SELECT sid, schemaname, status FROM gv$session ORDER BY 2;
SELECT inst_id, seq#, event, p1, p2, p3, wait_time FROM v$session_wait_history WHERE sid=<sid from above>
INST_ID SEQ# EVENT P1 P2 P3 WAIT_TIME
1 1 SQL*Net message from client 1413697536 1 0 6419
1 2 SQL*Net message to client 1413697536 1 0 0
and others similar, I found very large numbers (almost 97%) of the sessions have events as “SQL*Net message to client” and “SQL*Net message from client” on their wait_time even the sids are in inactive status. After checking the meaning of those messages in Oracle Performance and Tuning document, the document states that mainly they are probably network problems. So How can I drill down to what status of network from my client (the users) to server by Oracle or AIX? In Baan, it has its own parameter sets in its db_resource file controlling the connectivity. In average, there are 4000 “opened cursor current”, but most of them inactives.
So my colleague asked me rollback all th changes I did on OS level such as minperm%=5
maxperm%=90
maxclient%=90,
lgpg_regions lgpg_size,
sys0 maxuproc=512,
aio0 maxservers='260'
and many ioo parameters to system defaults.
I even removed the mulitplex copy of the redo log.
I tried to proof them that there maybe the problem of the Baan/Oracle connectivity, ie due to message above,

http://docs.oracle.com ... read them for configuration information.
http://tahiti.oracle.com ... read them for recommendations.
http://otn.oracle.com ... find the best practices docs.
http://metalink.oracle.com ... look for similar issues to yours.
People that change things, on production boxes, without first determining that metrics indicate they are a good idea, and then determining their impact on a test box, should be sold to zoos as leopard food.
PS: Slowly likely has absolutely nothing to do with anything you touched. First you tune the application. Then you tune the database. Then you tune the operating system. Get out of the way and make the DBAs do their job.

Infopath - Show All values in Text box From PeoplePicker control (Display Name)

I have One People Picker Control and one Text box.I set Value of Text box to "Display Name" and problem is that it show only First Value.so is there a way to show all values of "Display Name" in Text box ?
Thanks

Thanks
the link that you provied , didnt help me but i dig into "http://www.infopathdev.com/forums/t/19623.aspx" and found solution.
here is my solution :
1- Create one Picker control (i changed name of control to Member ) and one Text Box
2- Set Value of Text box to xdMath:Eval(xdMath:Eval(../my:Member/pc:Person, 'concat(pc:AccountId, ";")'), "..")
3- if you changed name's picker control just Replace "../my:Member/pc:Person" with name's People Picker control on your Form.
Edit 1 : I found out Why the formula in that Blog didn't work.it Because of copy/Paste
Dont Copy/Paste Formula because maybe you get Error . how ? here :
if you copy this formula :
xdMath:Eval(xdMath:Eval(../my:Member/pc:Person, 'concat(pc:AccountId,
result will be in Field :
xdMath:Eval(xdMath:Eval(../my:Member/pc:Person, ‘concat(pc:AccountId,
Look carefully, you see “..” instead ".." , this why you get Error Because of “
Edit 2 : if you want to show only Display name you can Replace
"pc:AccountId" to "pc:DisplayName".Here is Formula
xdMath:Eval(xdMath:Eval(../my:Member/pc:Person, 'concat(pc:DisplayName, ";")'), "..")

I use icloud email but (2 email accounts univ and icloud) and i need to have all my outgoing emails come "from" my university account, not my icloud. So how do i do that, note checking the default box for sending new messages only applies to new messages

I am using icloud email but i also have a university account. All my email is fowarded to my icloud account and what i need to do is make sure all of my email that i ship is from my university account and not from my icloud account. I know there is a box that allows the default for all new emails to originate from one account but how do i make sure that all my replies to email (i.e. they have been fowarded from university account to icloud) now go from my university account. please help anyone.

Sorry for the delayed response, yes i want to use my university account when replying to all emails. Note i just discovered something, when i forward my university email to my icloud account and than responded from either my imac of my macbook air (i.e. in icloud) it automatically goes to my university account in the "from" space (good news!!!). That is just what i wanted, . While that is the good news, the bad news is that my iphone and ipad still treat this email as being from icloud even though it is forwarded (redirected) from my university account. That is when i respond to an email (or for that matter create a new email in my icloud account) it automatically lists the icloud account as the "from" account and i have to go in and manually modify it. So i am 50% there to solving my problem (i.e. actually did nothing the systems just worked well) but i still need to figure out a way to make this happen on my ipad and iphone. Any help or suggestions, note the default button in the iphone and ipad for email work differently than the default in the composition menu of the imac or macair.

On Drilling down between ADF Pages we get Row currency has changed error

We have developed an Application using JDeveloper 10.1.3.2, you can login to
http://ap6002fems.us.oracle.com:7778/SetupTaskList
login with sso,
On Top Right corner you have a global link 'Select', click it and select Business Process Home
Click Detailed Business Process Link for 'Field Service and Depot Repair' Business Process and in Detailed Business Process Page, change Fusion Release to All, and select Activities Link for any Detailed Business Process and you will get
Error:
JBO-35007: Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key0
I tried checking the logs but log doesnt show up anything.
I also tried changing Enable Token Validation to false in Page Definition and this Row Currency Issue doesnt come up, but it doesnt navigate to the next page, it reloads the existing Detailed Business Process Page.

Hi,
I would be surprised if anyone outside of Oracle can run your sample application because its behind the firewall.
The error message is caused by changes that are applied to the underlying iterator without refreshing the UI in which case the two are out of synch. What helps is to PPR the UI (e.g the table as a result of a command action)
Frank

Changing the value of a row from bean code.

Hello,
I apologies for my bad English, and my bad knowledge of jdeveloper...
I had never work with Oracle, jdeveloper, adf... before this Month, but I have to migrate one "window" from forms to jdeveloper 11g r2 for my Internship...
The problem I am encountering:
This in the "window": http://imageshack.us/f/268/configp.png/
There is a master detail link between the top form, and the center table Table1.
When i click on a row of Table1, the layout at the right (at the top of the picture) will display an inputText, a slider, ... or a Table, depending of the row selected in Table1.
When it displays a table (Table2), i want, when i doubleClick on a line of Table2 , that it retrieves the value "VoarArtiCode" of the selected line, to the column OvpdOvprCode of the selected line od Table1.
I tried this:
public void DoucleClickTable2((ClientEvent clientEvent))
System.out.println("DoucleClickTable2 START");
//Affect the value needed to voarArtiCode
JUCtrlHierNodeBinding nodeBinding = this.getSelectedColumnOfTable((RichTable)clientEvent.getComponent());
String voarArtiCode = (String)nodeBinding.getAttribute("VoarArtiCode");
//Set the new value
AttributeBinding ovpdOvprCode = (AttributeBinding)getBindings().getControlBinding("OvpdOvprCode");
ovpdOvprCode.setInputValue(voarArtiCode);
System.out.println("DoucleClickTable2 END");
Or this
public void DoucleClickTable2((ClientEvent clientEvent))
System.out.println("DoucleClickTable2 START");
JUCtrlHierNodeBinding nodeBinding = this.getSelectedColumnOfTable((RichTable)clientEvent.getComponent());
String voarArtiCode = (String)nodeBinding.getAttribute("VoarArtiCode");
getQuestionSelectedRow().setAttribute("OvpdOvprCode", voarArtiCode);
System.out.println("DoucleClickTable2 END");
But that DIDN'T WORK :S
The row in my Table1 didn't change...
So I created the classe Table1ViewRowImpl.java
Put a print in this method:
public void setOvpdOvprCode(String value) {
System.out.println("setOvpdOvprCode(): value= " + value);
setAttributeInternal(OVPDOVPRCODE, value);
And when i double click on a row of Table2 with the value "1" in VoarArtiCode in the Table2 and the value "2" on OvpdOvprCOde in the Table 1 get :
DoucleClickTable2 START
setOvpdOvprCode(): value= 1
DoucleClickTable2 END
setOvpdOvprCode(): value= 2
The value is reset to the original value 2, automatically ...
I tried lots of things, but none works...
To sum up:
How can i change a current data Binding attributeValue from java ?
Someone have a solution for me ?
Thank you in advance
Julien
Edited by: 870381 on 5 juil. 2011 16:23
Edited by: 870381 on 5 juil. 2011 16:25

You should try to avoid traversing the tree especially in the case that you have selected rows. I think what you should try to first is ensure that your current row on the detail is updated on-select of the master. After you have that figured out, an attributeBinding will directly represent your selected row on that iterator.
With that, it's as easy as using ControlBindings to update your value.
=> It is well updated
So, basically, you should try to simplify your usecase to the point where you're working in one record at a time, if you have a table then its much better that you configure all the time (which is by default it already does that) the currentRow, then use attributeBindings.
Ok I did this:
DCIteratorBinding iteratorBinding = (DCIteratorBinding) getBindings().get("Table1View1Iterator");
iteratorBinding.getCurrentRow().setAttribute("OvpdOvprCode", "test");
But that still don't work !!
It is like that the value that i change is automatically reset to the original...
Is it caused by the master-detail link ?
Haaaaa my 2nd day of work on that "little" problem :'(

How to get ridd of Garbage Values in the row from the Tables

Hi Experts,
I have an excel Sheet which has a value as
Name
ABC
PQR
XYZ
MNO
STU
DEF
JKL
So i converted that to a csv (Comma de-limited) file and created an external table out off it.
So when i try to match to "select * from table;" it displys the vlaue as below
*"ABC*
however, it should have been just ABC.
select length(Name) from Table;
O/p: 4 (It Should have been 3)
How to get rid off this garbaje character?
Please Help!!!!!!!
Regards,
Ravi R

You didn't post CSV file. I can't reproduce your issue using the following CSV:
"ABC"
"PQR"
"XYZ"
"MNO"
"STU"
"DEF"
"JKL"
SQL> CREATE TABLE EXT_EMP
2 (
3 EMP_L VARCHAR2(255)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY "TEMP"
8 ACCESS PARAMETERS
9 ( RECORDS DELIMITED BY NEWLINE
10 CHARACTERSET WE8MSWIN1252
11 STRING SIZES ARE IN BYTES
12 BADFILE "EXT_EMP.BAD"
13 NODISCARDFILE
14 LOGFILE "EXT_EMP.LOG"
15 SKIP 1 FIELDS TERMINATED BY ','
16 OPTIONALLY ENCLOSED BY '"' AND '"'
17 NOTRIM
18 (
19 EMP_L CHAR
20 )
21 )
22 LOCATION
23 (
24 'Employess.csv'
25 )
26 )
27 REJECT LIMIT UNLIMITED;
Table created.
SQL> SELECT *
2 FROM EXT_EMP
3 /
EMP_L
PQR
XYZ
MNO
STU
DEF
JKL
6 rows selected.
SQL> SY.

Turn all format (data, columns, rows) from english to chinese?

Is there any possibilities that OBIEE report can be turn into Chinese language. I mean a function that can change all english format (data, colums, rows, etc) into chinese especially mandarin. Right now, what I found is that I need to find the chinese translation for all the english terms used in the report and convert them one by one.

Hi,
translating column names can be done using "Externalizing Display Names":
http://oraclebizint.wordpress.com/2007/10/29/oracle-bi-ee-101332-presentation-layer-translation/
translating report captions can be done by using language dependent captions:
http://oraclebizint.wordpress.com/2007/10/19/oracle-bi-ee-10133-presentation-catalog-captions/
translating data in your tables can be done by snowflaking a translation table on your dimension tables.
Regards,
Stijn

Drill down on all values of a row from bex universe

Similar Messages

Maybe you are looking for