Drill Down requery very slow

Hello,
I have several scheuled workbooks that pull a report back in 20 seconds. When I click on drill down to detail level on left nav, the report seems to repull and takes 7 minutes to pull back data. I look the the db server and the requery is just a blip.
Where is the performance issue. Is the BI Application Server recompiling the data and that is the source of delay. Or is the client slow in gettng the data back.
Any ideas on how to trace this issue from the App Server or the Database.
By the way, I using 10gr2 database and BI 10.1.2.48 with Discoverer Plus/Viewer.
I know there is a patch 5729515, 5736564. Do these fix this problem??

hi Ioanna,
The Problem seems to be with the quotes in your srw.run_report command line . The appropriate commandline should be
srw.run_report('report=DRILL2 paramform=No p_1='||:field1||' ... <rest of the cmd line >');
( note the quotes before / after ||:fie1d1|| .. )
Regards
Oracle Reports Team

Similar Messages

Drill Down Reports - Very Urgent

I have the following situation.
I want to create a drill down report and pass parameters from the
master report to the detail.
I built 2 simple tabular reports Drill1 (master) and Drill2 (detail). I have placed a button in the repeating frame of the Drill1 report, and I wrote the following code in its trigger:
srw.run_report('report=DRILL2');
I have tested the report and it works just fine.
But .... I want to pass as a parameter to the second report the value of a field. According to the documentation I shall change the button trigger to
srw.run_report('report=DRILL2 paramform=No p_1=''' || :field1 || ''''); -- (the value is a string)
I did so but it gives me the REP-0159 error. Am I doing something wrong?
Note that I am using reports version 6.8.12.1
Thanks
Ioanna

hi Ioanna,
The Problem seems to be with the quotes in your srw.run_report command line . The appropriate commandline should be
srw.run_report('report=DRILL2 paramform=No p_1='||:field1||' ... <rest of the cmd line >');
( note the quotes before / after ||:fie1d1|| .. )
Regards
Oracle Reports Team

Infinity 2 up and down speed, very slow, huge ping...

Hello wonderful friendly people, i'm looking for a bit of help to narrow down the cause of the terrible internet connection I have.
I live in a flat in a new build block in Bristol, just moved in with the owner who has had a few different connections with different providers in the last few years but have always been really bad service. He is now paying for Infinity 2 but we experience massively varying internet speed, as low as 0.25 Mb and as high as 20Mb download, but upload seems to be a bit more stable.
Streaming netflix, downloading files and general browsing is somtimes OK, but mostly terribly slow. It seems the speed goes up and down constantly, hitting rock bottom very often. Playing games is an absolute nightmare. Ping as low as 5, then shoots up to 500 meaning we can't play at all.
In short, paying a lot for terrible internet. The connection is through the phone line, we have a Homehub 3 but with an ADSL modem, i'm not sure we should be paying for Infinity if it's going through ADSL though? I thought Infinity was only phone line for the last bridge between house and local cabinet?
I think the problem is with dodgy cabling in the flats. From my experience this is where the problem points to but I want to be sure before I go to BT and ask for them to fix their line problems.
Here are some results from the last few days from speedtest.net
Can anyone help me with tests I can do to find where the problems lie, i.e. ping tests, trace routes and the like?
Cheers!

Download speedachieved during the test was - 3.89 Mbps
For your connection, the acceptable range of speedsis 16 Mbps-77.43 Mbps .
Additional Information:
IP Profile for your line is - 77.43 Mbps
Upload speed achieved during the test was - 6.77Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps
Thanks

Shuting down is very slow after update to 10.5

Hello everybody,
after update to 10.5.3 the shut down process (Mac Book black) takes several minutes. During the process I just see the the background. As I can't see what happens during the shut down prozess, I can't provide more information. So there are two questions:
1. Where or how I can see what happens during the shut down process. to analyze which process takes so much time?
2. May be this is a known issue and there is already a solution for it. If it's true, where I can get some more information regarding the issue.
Many thanks.
Andrej

anli, it wouldn't hurt to try running a cache cleaner and trash your system cache files - something could be corrupted which would slow shutdown as it attempts to write to it. There are several out there, but if you want something free (and who doesn't) try ONYX: http://www.titanium.free.fr/pgs2/english/download.html

Drill Down Report Performance issue?

Hi,
why drill down report is slower performance comparing with Action link/Navigation method? what could be the back end processing?
Thanks
MRD

Need to know/see your config to tell why it is slow, I would suggest to follow best practices for the same.
Drill down back end process something like:
Report fetch next level columns and the all aggregated measures are grouped by next level this may take some time unless you go with aggregate table (is part of best practices)
Appreciate if you mark as correct/helpful

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

HT1498 Apple TV Rented Movies Very Slow to download, Like 2 hrs or more, was around 2-3 min to load and start the movie, Its NOT my provider? as other movies from other sites down load in a short time

Hi Guys
Over resent weeks the down load time for the Appel TV Gen 3 has gone very slow, To the point that you can not watch the movie as it does but buffer and you have to stop about every 15 mins. I have a fully cable internet at 100mps or more. Other Australian sites down load movies in 2-3 min at worst and often can stat and play thought in 1 min 30 secs.
Apply TV was not like this in fast month to April, But May and June are Not Good

Have you verified speed via speedtest.net ?
Have you checked at different times?
Check istumbler or netstumbler to verify interference
Make sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

Drilling down slow - Something wrong with Secondary Indexes

Hi,
I have a cube that on the whole works very well, but periodically when I drill down to some characteristics it runs extremely slowly.
The cube is in a our Test environment and is not being updated with data.
When I go to RSA1[Select Cube] Manage>Performance, the DB indexes are now green after reactivating the cube and recreating the indexes.
Yet, when I drill down to certain characteristics, I can see in SM50 the query is doing a sequential read. It looks as if the secondary index on this dimension is not doing its job or being ignored.
I have tried Checking the Cube Database Indexes in RSRV and all is okay. The Master Data in the relevant dimension all seems to be active.
Any suggestions on how to get to the bottom of this would be much appreciated.
A trace on the SQL is showing the following statement taking excessive time:
Select * from RSDCHABAS where CHABASNM = ? and OBJVERS = ?.
I'm not sure why it's getting stuck on this table and it just list of InfoObjects. It is not reading from the actual cube in this statement.
Regards
Adrian

Hi Adrian,
In BW we are while tranforming data from source system we are using this table to dump the data in table RSDCHABAS. Which is nothing but use as buffer.
Basically this issue is due to low Temporary memory available on the system. Please check Temp memory available in DB02 and send this to your basis team to clear / entend this temp memory.
This will deffinately resolve this error.
Regards,
Mahesh

Mac Mini very slow at 4 gig memory, upgrade to 16 still slows down but takes a longer time

I bought a Mac mini a year ago. With an i7 and i terabyte and it cam with only 4 gig of ram. It worked fine for a while and i installed some apps then it started to get very slow. seeing the colorful "hourglass " turn round and round quite a few times. Then i went to the activity monitor where it told me that the memory used was about 3.89 gigs. I purchased a memory cleaner app from thr app store which helped a bit.
Today i upgraded to 16 gig memory and bang my computer ripped. The activity manager said i was using 6 gigs of ram and had 9.8 remaining.
after being on the internet for a couple of hours and using Firefox with about ten tabs open the computer started to get very slow again.
I checked the activity manager and it read 6 gigs used and the cash read a whopping 9 gigs. Did not think i would need the memory cleaner any more but after doing a clean it worked better.
Why did i get a whopping 9 gigs in the cash ? which is what it read after my computer slowed down again.

You may want to post in the Mac Mini forum, this is the iMac forum. If you would like me to I will ask the moderator to move the thread.

All my pdf files are very slow to download, scroll down and/or read.

I am having difficulties opening any pdf files as it is very slow, does not scroll down easily and just plain cumbersome. Does anyone have any suggestions on how to fix this? Additionally, as soon as I want to open the file, the fan on the cpu starts. I am not sure if they are related, but it just happens all the time. Any help is greatly appreciated.
Sharam

Have you verified speed via speedtest.net ?
Have you checked at different times?
Check istumbler or netstumbler to verify interference
Make sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

HT1976 Hello my is working very slow and iCloud is asking me a code that has send to me I write down the and he said code error?help me fix it thank you

Hello iPhone is working very slow and the code error and also iTunes very slow!!pls fix it .thank you

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

MacBookPro shut down very slow

Book ProRetina fährt stotternd hinunter, braucht mindestens zweieinhalb Minuten um herunterzufahren. ? Book Pro(Retina) shut down very slowly up to 1:30 minutes.
System:
16Gb ram
2,3 ghz i7
512Gb ssd (late 2013)

razzman wrote:
I was have some problems earlier with a very, very slow MacBookPro which wouldn't shut down. Every program interrupted Log Out. When I finally restarted, a file named "client node" appeared on my Desktop. It's a quite large file (1.23G). I tried to trash it, but Trash won't accept it. Is it important, can it be thrown out?
If you still have that file you might find useful advice in this older discussion thread:
http://discussions.apple.com/thread.jspa?threadID=2137621&tstart=-1

Skype being very slow/shutting down with an applic...

Two days ago, my Skype began working very slowely. It is still slow, and now, every twenty minutes or so, it shuts itself down, yielding the attached error.
I tried uninstalling it and reinstalling the newest version, and the same thing is occuring. I have no idea what to do.
(A screenshot of the error message is attached)
Attachments:
error.png ‏23 KB

Hi DaddyPaycheck, apologies for the delay replying.
The hard drive is less than half full. A 500gb drive with 228gb remaining, plus 30 odd set aside for boot camp. So the drive size I expect is more than fine.
For further info I have done the following -
Re installed SL, backed up and restored files from Time Machine. Updated to 10.6.2 at moment.
Have cleared off loads of stuff that was sitting redundant and essentially gathering dust.
Used Clean My Mac to clear out all other types of bagged accrued over time.
Ran disk utility from the install disc - all fine.
Ran verify / repair permissions - all now fine.
Verify Disk (from utilities just now) - all fine.
Have unplugged all cables from back such as Ext HD / USB Ports / even speaker so that am starting / closing with only bone fide connections running.
Have "ejected" boot camp hd and closed down, still the delay.
Am at a loss to see where of what is causing this delay. I timed it again just now and at close down, I get the spinning icon for 50seconds before it finally closes, so something is going on.
Not sure if it is connected, but at start up, with the apple logo on display, I also get the spinning icon for about 20 seconds, before launching the desktop, which itself shows no signs of any problems whatsoever.
Just the shutting down that has me slightly concerned.

Email is down on my imac,.. on iphoe works very slow... it ahs been almost 14 hours.. any news????, email is down on my imac,.. on iphoe works very slow... it ahs been almost 14 hours.. any news????

Email is not working on my imac since this morning!!>. On my iphone is working but very slow,.. but icloud is not recognizing my emails sent on my iphone... No error messages,... It just does not work... please, any help?? Should I do something?? I apreciate any comments..... All the best to all....

The syatem is down in many parts of the worlld. Keep checking icloud.com/status BUT it is more than the 1.7% listed being effected. My mail has been down since yesterday.

Very slow boot up from shut down

My MacbookPro is very slow booting from shut off. This can take 4 or 5 minutes from when I hear chime to login screen. The only recent change to my Macbook was an Apple recommended software updates:
Quicktime 7.3 and iTunes 7.5

Found the answer to my own question in Apple Support pages.
http://docs.info.apple.com/article.html?artnum=303319
The article says:
*If the computer is on, turn it off.*
*Disconnect the AC Adapter and remove the computer's battery.*
*Press and hold down the power button for 5 seconds and then release the button.*
*Reconnect the battery and AC Adapter.*
*Press the Power button to restart the computer.*
Now works fine, 15 sec from chime to login screen.

Drill Down requery very slow

Similar Messages

Maybe you are looking for