DrLazaroJamF It can be done... challange complete....

Here ya go without a SpringLayout. However I still don't get GridBagLayout.
     private static void addComponentsToPane(Container pane)
          JPanel northPanel  = new JPanel();
          northPanel.setLayout(new GridLayout(4, 2) );
          //Create Needed components
          String[] labelsText = {     "Type: ","Type: ", "Jurs Code: ", "Amount: "};
          JLabel[] labels = setLables(labelsText);
          String[] inputFieldsText = {"", "", "", ""};
          JTextField[] inputFields = setTextFields(inputFieldsText);
          String[] buttonsText = {"Calculate Taxes"};
          JButton[] buttons = setButtons(buttonsText);
          String[] textAreaText = {""};
          JTextArea[] textArea = setTextArea(textAreaText);
          //Add components to northPanel
          for(int count = 0; count < labels.length; count++){
               northPanel.add(labels[count]);
               northPanel.add(inputFields[count]);
          //Add components to the centerPanel
          centerPanel.add(buttons[0]);
          //Add components to the southPanel
          centerPanel.add(textArea[0]);
          //Add components to JFrame Panel
          pane.add(northPanel,BorderLayout.NORTH);
//******************************* Private Functions ************************************
     private static JTextArea[] setTextArea(String[] txtArray){
          JTextArea[] txtArea = new JTextArea[txtArray.length];
          for(int count = 0; count < txtArray.length; count++){
               txtArea[count] = new JTextArea(txtArray[count], 10, 10);
          return txtArea;
     private static JLabel[] setLables(String[] txtArray){
          JLabel[] labels = new JLabel[txtArray.length];
          for(int count = 0; count < txtArray.length; count++){
               labels[count] = new JLabel(txtArray[count], JLabel.RIGHT);
          return labels;
     private static JButton[] setButtons(String[] txtArray){
          JButton[] buttons = new JButton[txtArray.length];
          for(int count = 0; count < txtArray.length ; count++){
               buttons[count] = new JButton(txtArray[count]);
          return buttons;
     private static JTextField[] setTextFields(String[] txtArray){
          JTextField[] inputFields = new JTextField[txtArray.length];
          for(int count = 0; count < txtArray.length; count++){
                         inputFields[count] = new JTextField(txtArray[count], 10);
          return inputFields;
      private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("GridBagLayoutDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Set up the content pane.
        addComponentsToPane(frame.getContentPane());
        //Display the window.
        frame.pack();
        frame.setSize(300, 120);
        frame.setResizable(false);
        frame.setVisible(true);
//*****************************  Program Main ******************************************
    public static void main(String[] args) {
         //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
    }

Agreed. I just got it up last night (no pun). With all of the
info in this discussion forum it should be relatively easy to get
it going.
Bryan Taylor (guest) wrote:
: Whoopie!!! I'm up.
: Many, thanks to all of the people who have helped solve the
: numerous obstacles. To the rest of you struggling out there,
I've
: put the teaser below - keep trying. I like what others were
: saying -- They call it 8i because it works on the 8th
install ;-]
: It CAN be done!
: I noticed Oracle posted they will have a patch out soon.
: [oracle@shadow oracle]$ sqlplus system/manager
: SQL*Plus: Release 8.1.5.0.0 - Production on Fri Aug 6 23:08:53
: 1999
: (c) Copyright 1999 Oracle Corporation. All rights reserved.
: Connected to:
: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: With the Partitioning and Java options
: PL/SQL Release 8.1.5.0.0 - Production
: SQL> select 'Hello World' from dual;
: 'HELLOWORLD
: Hello World
: SQL>
null

Similar Messages

  • 2. Refine your search Found 1 result for THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

    THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • Delivery completed indicator set still goods receipt can be done

    Dear SAPians,
    I have created a P.O of say 100 quantity against which i made a goods receipt of 50 quantity.
    After this i have set the delivery complited indicator in P.O but still i can make goods receipt.
    how do i stop these the GRNs
    Regards
    Sujit

    Dear Sujit,
    Just as what Kedar said, Delivery Complete is just an "indicator". It is used for MRP planning purposes and you can still perform receiving even with this indicator checked.
    To block receiving there are 3 ways to do it, i would recommend no.1.
    1) Change the quantity according to receipt quantity.
    2) Set the lock button for the particular line item, which is proposed by many in this forum. However i think it is not the right solution because, you will not be able to do Invoice Verification(MIRO) after setting the lock button! It also doesnt look nice.
    3) You can use Final Delivery field (set it to today so no further receiving can be done). But you also need to configure system message M7163 to Error for this to work. SAP default only sets this to Warning, where you can still proceed.
    Hope this helps.

  • The windows of the Windows bar are already a form of tabs, so I don't need them in Firefox. How can I disable them completely from Firefox 23?

    RE: TABS ARE WINDOWS!
    The Windows bar already functions as a tab bar. Those tabs are called "windows." So, I find Firefox tab windows superfluous. How can I disable them completely from Firefox 23? I don't need what is essentially TWO windows bars covering up the entire width of my widescreen monitor's image! I already have a Windows bar at the bottom of my screen and, if I really wanted to, I could change ITS position to the top of the screen, so that it would LOOK like the Firefox tab windows bar. Firefox TABS are, essentially, a superfluous SECOND WINDOWS BAR.
    Here are my reasons for why I'd rather use Mozilla's Firefox, than Microsoft's Internet Explorer or Google's Chrome. I love and admire Firefox for Mozilla's intent on good security, for Firefox's Personas add-on, and for Firefox's free use of the Ad-Block add-on which, as you know, has the distinct virtue of reducing screen clutter--the last of which is my motive for wanting to get rid of the SUPERFLUOUS Firefox tabs "windows" bar. I am dreadfully sick of companies forcing miscellaneous bars (mostly representing marketing campaigns trying to sell me something) into my browser (and down my throat) every time I download something. (In case you haven't guessed, I am deliberately referring to your Firefox tabs bar as a "Firefox tabs 'windows' bar," because TABS are WINDOWS!)

    Let me clarify even more. The Firefox add-on you mention does not remove "tabs" windows. It only HIDES the "tabs" bar when there is only one "tab" in that window. It DOES NOT end "tabs." It does not turn "tabs" off.
    I know this, because, even with the add-on you recommend, the "tabs" bar often re-appears when I open a link, which--for some unknown reason--Firefox defaults to opening in a second "tab" within the same window, rather than putting it in a new Windows bar window. This, of course, disregards what I want to happen.
    I want to use my Windows bar to control my windows. I do not want my Firefox browser controlling my windows--which it calls "tabs." Can you tell me how to shut off "tabs?"

  • So my phone got wet the other day. I dried it out completely, but the touch screen still isnt working. Is there anything I can do short of getting a new phone? Anything that can be done at the nearest Verizon store? I am one of three phones on our plan an

    So my phone got wet the other day. I dried it out completely, but the touch screen still isn't working. Is there anything I can do short of getting a new phone? Anything that can be done at the nearest Verizon store? I am one of three phones on our plan and I am trying not to need to get a new phone before our contract expires next month.

    Hello wetphone!
    We're sorry to hear that your phone isn't working. It's very important to have a functioning touchscreen!  Let's explore your options OK? If the phone is taken to a store, troubleshooting can indeed be done. The store representative can even contact us while you're there.  Do you have insurance on the device? Or, do you maybe have a prior vzw device that can be activated until the upgrade is available? You can also check your My Verizon account to see if your line( or another line on the account) is eligible for an upgrade. VZW always has options for you.
    Thank You,
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

    what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil"  I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
    Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
    Thanks for any help

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • Migration is in progress and thus upgrade can be done as soon as migration is 100% complete.

    When I click on the "Upgrade Options" button on one of my C670s I get this message:
    Migration is in progress and thus upgrade can be done as soon as migration is 100% complete.
    Any thoughts?

    Usually the only thing we see w/ migration message and % is during PVO setup and migration to SMA.  If that is the case... there could be stale or incomplete messages that did not migration or get accounted for.  Suggestion would be to disable CPQ from the ESA side, commit changes, and then re-review and enable the CPQ/PVO to see what occurs.  This should clear out after that has checked itself.
    -Robert

  • How can i delete contacts completely so that they don´t mix up with new addresses and groups?

    how can i delete contacts completely so that they don´t mix up with new addresses and groups?
    Alle geänderten Adressen oder Gruppen erscheinen immer wieder bei der Adresseingabe von mails.
    Chaos!

  • I use aperture 3 since a long time. Using slit viewer, now the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How ca

    I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?

    This lloks like your preferences file might have become corrupted.
    you probably have a problem with corrupted user preferences.
    Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
    Aperture 3: Troubleshooting Basics   http://support.apple.com/kb/HT3805
    Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
    Quit Aperture, if it is running. Log off and on again.
    Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
    In the widow that will open, scroll down to "Preferences"
    From the "Preferences" folder  remove "com.apple.Aperture.plist".
    Then try to launch Aperture again.
    But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
    Regards
    Léonie

  • TV display shows USB cable from apple tv and iTunes logo. Otherwise completely unresponsive! what can be done to revive apple tv?

    TV display shows USB cable from apple tv and iTunes logo.
    Otherwise completely unresponsive! what can be done to revive apple tv?

    That is telling that the Apple TV is in recovery mode and needs to be restored. This is done by connecting to iTunes via micro USB.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • Since the last actualization you have done on June 29, 2014, I cannot either access my photos or complete the actualization. What can be done to correct this problem?

    I Cannot access Adobe Revel since your last Actualization done on June 29. I cannot either access my photos or complete thte actualization. I have tried it several times since that date. What can be done to correct this problem?
    Revel

    Are you on an ios device and trying to upgrade to 2.3.2?
    Please refer to the post below for updates on the revel installation issue:
    Adobe Revel 2.3.2 installation issue

  • Someone hacked my computer I done a complete reset and lost all my data only seemed to make it worse, I keep getting crash reports, can anyone help?

    Someone hacked my computer I done a complete reset and lost all my data only seemed to make it worse, I keep getting crash reports, can anyone help?

    Wayne Brydon wrote:
    ... I keep getting crash reports,
    Post the entire text of the most recent crash report.

  • De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Deauthorise all to reset to zero, then authorize again.
    Following quote from Apple Support:
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

  • Every time I try to upload a video to youtube (or pictures to blog services like tumblr) using Firefox, I cannot upload them unless I use the "basic uploader" function. Why and what can be done?

    Every time I try to upload a video to youtube or a pictures to a blog service, such as tumblr, I am unable to do so with the default uploading options (usually something that allows multiple uploads, etc). Instead, I can upload these media using their "basic upload" functions. Why and what can be done?
    == URL of affected sites ==
    http://www.youtube.com; http://www.tumblr.com

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • White screen of death with some text, what can be done?

    Anybody knows what can be the reason for this particular screen? What can be done?
    I bought over eBay, and discovered that the logicboard was changed...
    Tried few times to restore, but same results.. sometimes the screen becomes completely red.
    The display works fine, from time to time it starts correctly and I can activate the phone and play around.
    I tried DFU, but I get the error 4013 in iTunes during the restore, then it switches to recovery mode and a further restore gets interrupted.
    Is there any deeper way to completely wipe phone's firmware, to make sure there is absolutely no software issue?
    Or should I bring it to the Genius bar?
    (NANDI [NAND] [NAND] WNW MANN [NAND] [MMO] (NAND] tNHND1 MAW
    eFindFlashMediaAndKeepout:601 physical nand block offset 1 start:356 this 0x9e0d3400 PROVIDER=Dx9cb74c00 flashMedla=0x9cb7400, WMR.Start:149 Apple PPN NAND DriNer, Read/Write WMR_Start:174 FIL Init IOU WNR.Open:371 %/Ripen EOK],„ scxtboot:88 sftl: error, unclean shutdown; ado ted 10951 s 4 errs WIR Open:428 FTL U _Open LO .pu6stIshServlces:642 FTL capabtlAttes: 0 a c :c 1 .ppnvflGetStruct:3469 Checklng borrowed blocks - count: Gant cent afetchBorrowedLlst:881 number of borrowed blocks 1

    [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [NAND] start:356 this 0x9e0d3400 PROVIDER=0x9cb74c00 flashMedia=0x9cb74c00
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [NAND] WMR_Start:174 FIL_Init [OK]
    [NAND] WMR_Open:371 VFL_Open [OK]
    [NAND] s_cxt_boot:88 sftl:error, unclean shutdown; adopted 18951 spans
    [NAND] WMR_Open:420 FTL_Open [OK]
    [NAND] _publishServices:642 FTL capabilites: 0x00000001
    [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 25 max_count: 25
    [NAND] _fetchBorrowedList:881 number of borrowed blocks: 18

Maybe you are looking for