Dual boot Win7 on external eSata drive with Precision M4700

Because virtualization doesn't support some HW devices I need, I would like to dual boot Win7 Pro/64 on an external (removable) HDD connected to the eSATA port of my Precision M4700.
eSata means optimal performances, but will the boot menu be happy with a removable disk, i.e. which will NOT be permanently connected (obviously I won't boot the OS on the removable disk if it is not connected) ?
And on the legal side, is it OK to use the OEM license of the OS that shipped with the system for this ?
As a side question, are the OS entries in a Win7 boot menu bound to a physical disk on a specific Sata port ? IOW, what happens if I move a HDD with a bootable partition/volume from the internal bay (port 0) to an external eSATA enclosure connected to the eSATA port (port 5) ? Is the eSATA port transparent to the Win7 boot loader ? Will the volumes and drive letters remain unchanged and appear seamlessly to the OS on it ?

Hi Benoitm,
Assuming the M4700 can boot from an external eSATA port, this should be possible. And it should be possible to install onto an HDD then put that drive in an external case and boot from it. Your preferences and drive letters should be retained. You might want to verify your system can boot to an external HDD first.
The Dell license only covers the version of the OS that came with the system. In theory, dual boot requires two licenses.

Similar Messages

  • How can I boot images on external hard drives with an older OS

    Hi,
    I recently bought a new MacBook Pro Retina (running OS 10.9.2 Mavericks), because I had to give back my „old“ one (bought in February 2013, running OS 10.8 Mountain Lion), which was only a loan from University.
    So here comes my problem: I used Carbon Copy Cloner to create bootable images of my old MacBook on two independent hard drives. I tested these images and they both booted perfectly well on the old MacBook. As it turns out, I cannot boot from these images on my new MacBook Pro, I just get a crossed grey circle (both images work perfectly well when I boot from my internal hard drive and I just use them as external drive, by the way). Is it really correct, that it is not possible to boot a system with an older OS as the OS of the MacBook? Why? I really would like to have the option of booting these images, since I have some applications installed I might want to use from time to time in the future (and I don’t want to migrate all applications to my new MacBook, but prefer a clean install). As I understand, it would be necessary to update the images to Mavericks. But how do I do this when I have no computer which is able to boot them?
    I still have a very old MacBook from 2007 running OS X 10.5 (Leopard) and I also tried booting the images with this computer - didn’t work either. Would it help to update this to Snow Leopard? What OS would I need to boot my Mountain Lion images?
    Any help on this is highly appreciated!
    Thanks!

    Hi!
    Thanks for your prompt response. The reason I don't want to migrate all apps is that I had installed a lot of scientific applications on the Mt-Lion MacBook that I will definitely not use in the future, some that I might use only very rarely, and I can migrate only the complete applications folder (and I have only a 256 GB hard drive). Of course I could deinstall the unused apps manually after the migration, but I am not 100% sure, if this procedure completely removes all the stuff from the libraries and preferences, etc. Moreover I also started playing with some time ago with server applications like apache server etc. and since I am a complete newbie in this field, I have to admit, I really don't know how to uninstall these things properly. So I figured a clean install for the new MacBook would be the best. Well, maybe I will migrate everything and remove the unnecessary stuff afterwards manually. I am just a bit disappointed, because I didn't anticipate these problems with the images...
    Just one further question: Is it correct, that if I find a way to update my images from Mt-Lion to Mavericks (if that is possible at all?), this would make them bootable again?
    Thanks!

  • Can I boot to an external hard drive with Windows OS installed on it to play games?

    Hello,
    I am getting a Mac in the near future for work, and was wondering if it was possible to take my current PC's hard drive and connect it to the Mac with the high speed thunderbolt cable, then book to the external hard drive to play games in windows. In my research I have not seen much about this. I understand that BootCamp works, and am willing to do this, but with the new Macbook Pros that were released, there is very little storage space for two partitions.
    Any help would be great,
    Also, I know that the performance would not be stunning, but my performance is already lacking because I only have AMD integrated graphics on my machine.
    Thanks

    A virtual machine is a software system such as VMware Fusion or Parallels which provides a software environment within which a different operating system, such as Windows can run. The files which make up the virtual machine itself (e.g., where Windows and any Windows based software, such as Microsoft Office, reside) can be located on an internal or an external drive. Only the virtualizing program itself needs to be on the boot drive. The connection between an external drive on which the virtual machine files reside will be faster than the external drive itself if the connection is USB 3.0 or Thunderbolt because the speed of an external HD will be the limiting factor. If the external is an SSD, the connection used might make a difference. But a virtual machine will still be slower than a physical machine (i.e., computer) because  hardware is faster than the software emulation of it whether the hardware is Windows in BootCamp or a real PC, as BobTheFisherman says.
    If you mean the new Retina MacBook Pro (Late 2013), the internal storage isn't a hard drive, it's an SSD on a PCIe bus. OWC, among other vendors, may one day develop an upgrade method as they have for the SSD's in earlier rMBP's but for now, what you order is what you get.

  • Success with adding an external eSATA drive to a Verizon FIOS DVR

    August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
    I just upgraded from a Comcast DVR to a Verizon FIOS DVR.   I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive.   Selecting a viable external drive for the FIOS DVR was easier said than done.  The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
    The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive.   This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
    I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size.  I ordered from amazon.com for $170.99.  This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.  
    According to the Western Digial web site this is a AV-GP drive:  "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
    http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf 
    I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39.  I chose this one because it does not use a fan that could cause continious noise.  The box is made out of metal so it cools itself as long as it is exposed to air (not covered up).  This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
    Then I needed a eSATA cable.  I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90.  I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR.  The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
    The total cost was $255.56 including shipping for all these items.  
    I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive.   There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format.  That would mean that any future upgrade would require losing all recorded files during an upgrade.  That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
    The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR.  When I plugged in the new eSATA drive it was automatically discovered.  I was asked by the DVR if I wanted to format the new drive.  I answered yes and within 2 hours the drive completed formatting.   I did not watch the boring format so it could have finished faster.   
    When I started recording new videos they go directly to the external drive automatically and avoids the internal drive.  It had no trouble recording two HD shows and playing a recording at the same time.  I now have 20 hours of HD video recorded and the 3TB external drive is 17% full.  So far my experience with the external drive has been great.   No problems or issues.   Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story.  It will take some time to figure out how to make all the new features work.
    It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more.  I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did.  I have had this working for 3 days without any issues.  I hope this post makes it easier for you to add an external eSATA drive to your DVR.
    Here are the three items ordered from Amazon to make this work:
    Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
    Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
    StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

    You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
    I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external  monster drive available from another company.
    I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
    I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
    Details of what I learned:
    The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
    There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
    To access this diagnostics menu:
    1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
    2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
    3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
    4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
    A five page disk report appeared. With a little bit of interpretation I discovered:
    The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
    The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
    "drive 2/hdc2" has 1007 MB total with 317 GB free
    "drive 3/hdc3" has 1007 MB total with 974 GB free
    The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

  • MBP Late 2010, How can I install Win7 Boot Camp using External Optical Driv

    Hello:
    I have a new MBP purchased in February. It's not the 2011 model. I replaced the Optical drive with an SSD drive and put the optical drive in an external enclosure. The Optical drive works great, reads, writes, etc. My Windows 7, Pro 64bit DVD works also, tested on a PC.
    I use the Boot Camp assistant to create a partition. It them reboots and never starts up from the optical drive. I get an Apple logo alternating with a stop sign.
    I have got back to OS X by starting with the Option key and choosing my OS X volume.
    I tried booting to the DVD by using the option key, that did not work. I then choose the EFI option which allowed me to hit any key and appeared to boot from the external optical drive. Windows setup screen came up and I hit enter to start the file loading process. It eventually stopped when the progress bar was all the way across the screen. Then nothing.
    Questions {Please give definitive answers, not guesses, thanks :)}
    1) Is it possible to setup a boot camp Windows installation without an internal optical drive? Yes/No.
    2) If yes, how?
    3) I see the rEFIt utility has helped some but I read mixed reports. Will this help me boot and run Windows setup from an external optical drive? I don't want to install it if it's not known to be a certain fix.
    4) Is my only options to reinstall the optical drive?
    I chatted to OWC the vendor that sells the bracket. They had no idea how to install a Windows BC partition without an internal drive.
    I am seriously discouraged by what seems to be Apple wanting to control everything. I had a Mac Pro and Air book in my future but now, it's on hold.
    Thanks in advance,
    Kevin

    I tried what you are doing with a 2007 MBP, and could not get any Windows CD s to boot from an external optical drive, firewire or USB.
    I think this is fundamental to Windows which won't boot from an external USB drive either even on a Windows machine (although I believe there may be complex ways of achieving this). I don't think this is Apple trying to control the world.
    I ended up taking the MCE Optibay out and putting the original optical drive back in.
    Just possible that something has changed between a 2007 MBP and 2010 MBP, but I doubt it.
    If you want the second internal HD, you have two options:-
    1. Put the Apple optical back in, install Windows, then take out the optical and refit the SSD. The external optical will still be able to install windows apps and data etc, just not boot any windows install CDs or utilities (like Paragon rescue disks). You will not be able to do a Windows repair install without refitting the optical.
    2. Parallels, which has come a long way in the last two years. I am 99% certain that Parallels will install from an external optical.
    Message was edited by: Mike Boreham
    Message was edited by: Mike Boreham
    Message was edited by: Mike Boreham

  • Dual HDD dual boot Win7/Win7 hibernate corrupts partitions? W510

    I have two SSDs in my laptop using the ultrabay caddy. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa.
    What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often (on either hdds). On several occassions I have seen the win 1/2 partition become RAW instead of NTFS (that is - it's completely borked) in Disk Manager or chkdsk running and wiping out all security descriptors on the file system resulting in a completely broken system (black screen of dead - unbootable).
    Why am I seeing these corruptions and what can I do to prevent them?

    Hi Benoitm,
    Assuming the M4700 can boot from an external eSATA port, this should be possible. And it should be possible to install onto an HDD then put that drive in an external case and boot from it. Your preferences and drive letters should be retained. You might want to verify your system can boot to an external HDD first.
    The Dell license only covers the version of the OS that came with the system. In theory, dual boot requires two licenses.

  • Mac Pro External eSATA Drive

    I am looking for a 2TB external hard drive for my Mac Pro (Quad Core 3GHz) and have a question. The Mac Pro has a 500 GB internal boot drive and three internal 500 GB drives RAIDed into a single 1.5TB drive. I would use an external 2TB drive for backing up the 1.5TB daily with Apple's Backup and will use it for Time Machine when I install Leopard. The computer is used primarily for Final Cut Pro Studio.
    Costco has a Western Digital external 2TB drive with Fire wire 800 (800mb/s) for $600 and a Western Digital external 1TB drive with eSATA (3000mb/s) for $300. Either way it's $600 for 2 TB. I would need to purchase an eSATA Extender Cable to utilize the two extra SATA ports found on the Mac Pro's logic board for $25.
    *The question is*: Could I connect two of the 1TB eSATA drives with the eSATA Extender Cable and make them a single 2TB RAID with Apple's Disk Utility... and would you recommend doing that over getting the 2TB drive which is 1/4 the speed and the same price?
    Please see the details below and thank you for your help. I asked the Geniuses at three different Apple Stores and got 3 different answers.
    2TB - My Book Pro Edition II (Firewire 800) $600
    http://www.westerndigital.com/en/products/products.asp?driveid=341&language=en
    1TB - My Book Home Edition (eSATA) $300
    http://www.westerndigital.com/en/products/products.asp?driveid=357&language=en
    eSATA Extender Cable $25
    http://www.newertech.com/products/esata_cable.php

    I am looking for a 2TB external hard drive for my Mac Pro (Quad Core 3GHz) and have a question. The Mac Pro has a 500 GB internal boot drive and three internal 500 GB drives RAIDed into a single 1.5TB drive. I would use an external 2TB drive for backing up the 1.5TB daily with Apple's Backup and will use it for Time Machine when I install Leopard. The computer is used primarily for Final Cut Pro Studio.
    Costco has a Western Digital external 2TB drive with Fire wire 800 (800mb/s) for $600 and a Western Digital external 1TB drive with eSATA (3000mb/s) for $300. Either way it's $600 for 2 TB. I would need to purchase an eSATA Extender Cable to utilize the two extra SATA ports found on the Mac Pro's logic board for $25.
    *The question is*: Could I connect two of the 1TB eSATA drives with the eSATA Extender Cable and make them a single 2TB RAID with Apple's Disk Utility... and would you recommend doing that over getting the 2TB drive which is 1/4 the speed and the same price?
    Please see the details below and thank you for your help. I asked the Geniuses at three different Apple Stores and got 3 different answers.
    2TB - My Book Pro Edition II (Firewire 800) $600
    http://www.westerndigital.com/en/products/products.asp?driveid=341&language=en
    1TB - My Book Home Edition (eSATA) $300
    http://www.westerndigital.com/en/products/products.asp?driveid=357&language=en
    eSATA Extender Cable $25
    http://www.newertech.com/products/esata_cable.php

  • FiOS HD-DVR crashing since adding external eSATA drive

    After the recent firmware update, I added an 2TB external eSATA drive to my FiOS DVR.  I'd really been looking forward to this because our DVR had been perpetually 90+% full.  After a couple of reboots, the drive was recognized and showed as a second DVR at 0% full in the DVR Status menu.  Just to make sure everything worked, I scheduled a bunch of recordings to make sure it was utilizing the new drive.
    A few days later, we found that the DVR had erased several of our recordings because it was out of space.  Checking the DVR status again, the new drive had disappeared. 
    After a couple of reboots, it appeared in the status menu again, and the DVR started recording to the external drive.  But a few days later, my wife couldn't find the recordings.  Turns out it had disappeared again. 
    This pattern has repeated itself several times over the last couple of weeks.  On two occasions, the DVR has completely frozen while we were in the middle of watching something, necessitating a complete reboot in order to watch TV, and interrupting any recording that was going on in the background.  Each time, at least 2 reboots has been required before the eSATA drive appears. 
    Needless to say, this whole thing is a disaster.  I spent a ton of money and the result is poorer service quality.  What can I do to fix this?

    After a few minutes searching I found the link of recommended drives.
    http://www22.verizon.com/ResidentialHelp/FiOSTV/Ot​her+Hardware/eSATA/129841.htm
    Here's a snipet from that page...
    Which Verizon FiOS TV DVRs are compatible with eSATA devices?
    The following FiOS TV DVRs are compatible with eSATA devices:
    Motorola QIP 7216
    Motorola QIP 7232
    Cisco CHS 435 HDC
    Which eSATA external storage devices can I use with my FiOS DVR?
    Verizon recommends the eSATA hard drives below for use with FiOS DVR. Customers choosing to install other drive types will assume the risk of compatibility with FiOS DVR and Verizon will not assist with compatibility or performance issues should they arise.
    Western Digital – WDBACS5000EBK-NEVZ – 500GB
    Western Digital – WDBACS0010HBK-NEVZ – 1TB
    Western Digital Retail – WDBABT0010HBK-NESN – 1TB
    I'm not sure why this happened...'Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied.'
    I'm assuming that the above drives were the only one tested at the time. We users can add to this list if we want. Anyone game?

  • I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to

    I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to do that?

    kahjot wrote:
    Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
    Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

  • Hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

  • Time Machine: Can I use a smaller external hard drive with larger internal?

    Can I use a 250G external hard drive with and 500G unfilled internal drive with time machine? Or will time machine require I a 500G? I don't plan on filling the internal drive for a long time and don't want to buy a new external drive right now.

    Yes, but you are very likely to get in trouble very quickly.
    The problem is that TimeMachine saves multiple versions of any file modified, and if that file happens to be large, you can quickly fill up your TimeMachine drive such that it is throwing away older versions faster than you would desire.
    Also if your boot drive's storage usage gets even close to the 250GB external drive's capacity, TimeMachine is likely to stop working.
    If possible, I would suggest an external drive that is twice as large as your boot drive, or at least 1.5 times larger.
    I guess you could repartition your boot drive so it is smaller than your external disk so you would be less likely to use more space than could fit on the external.
    Personally, my opinion about backups is that much of my data is impossible to replace (family pictures, etc...), and spending money on backup hardware is a small price to pay for securing those memories. I also try to have it backup in more than one location in more than one way.

  • Help, need help booting XP from external hard drive

    Hi all, i can't seem to get XP to boot from my external hard drive.
    OK, heres the story. i have an imac. i use bootcamp to run OSX and XP. things are good. but i run out of space, so i buy myself a 2tb bare drive and swap it out. so i put the original internal with OSX and XP into an external firewire/usb enclosure. I install refit. I hold option on startup and it shows that i have a windows and a mac OS i can boot from the External firewire disk. looks great, but when i choose the windows from the Ext disk, it doesn't boot, instead it loads windows7 on my new 2tb internal disk.
    i hear its hard to boot windows XP from an external disk. my professor told me it has something to do with the boot.ini file on the XP disk... something about changing the value of the "rdisk" to 1, which i have done.
    i am not trying to reinstall xp, rather just boot from it because i have so many applications/plugins that i do not wish to reinstall.
    Does anyone know if this is possible?>> Logon to windows7, and create a system image/backup of the system FROM the XP external disk? and then reinstall XP on that disk, then restore back onto itself? that way i won't have to reinstall.
    anyone have any ideas?

    Hi boi,
    you can't start ANY windows OS from external HD...

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Interchange eSATA drives with different top boxes

    I just had a big scare today because I had a problem with my top box and thought I would have to replace it. The problem is that even though most of the shows (my son's) are in the external eSata drive,  they wouldn't be accessible with a new DVR unit. Sometimes I wonder if I should go back to the days of VCR's where you could see the recorded programs in any TV.
    My question is.......does anyone know if Verizon is planning or it it's even possible for these external eSata's to one day be like the VCR's, or independent of the top boxes it recorded from?
    Thanks,

    morcom201 wrote:
    I just had a big scare today because I had a problem with my top box and thought I would have to replace it. The problem is that even though most of the shows (my son's) are in the external eSata drive,  they wouldn't be accessible with a new DVR unit ... does anyone know if Verizon is planning or it it's even possible for these external eSata's to one day be like the VCR's, or independent of the top boxes it recorded from? ...
    This issue has been raised many times, but so far there is no resolution.  We have brought it to the attention of VZ Communications many times, but so far no relief.  See for example:
    http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/quot-Divorce-quot-External-eSata-Drive-Fr...
    Another user once suggested that the external drive be referenced to the account holder's account number rather than a specific physical device.  I believe this practice is followed by another ISP or cable company.  However and sadly once again, no relief yet.

  • Booting Windows on External Hard Drive

    Is it possible to set up an external hard drive with one or more Windoze partitions so I can boot from them? If so, will the drive also boot a Windoze machine? Also, what is the oldest version that will work with a 2.2 GHz MB?
    Message was edited by: MacInAction7

    Windows does not boot from external drives.
    For Boot Camp installations:
    Windows XP Home Edition or Professional with Service Pack 2 or later, or Windows
    Vista Home Basic, Home Premium, Business, or Ultimate
    Important:
    You must use a single full-install Windows installation disc (Service Pack 2 is required for Windows XP installations). Do not use an upgrade version of Windows and do not install an earlier version of Windows XP and attempt to update it later to SP2. Use only 32-bit versions of Windows.

Maybe you are looking for