During audio messaging the send button does not switch to a microphone after selecting a contact
During audio messaging the send button does not switch to a microphone after selecting a contact
Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.
Similar Messages
-
How do I send text messages from my Ipod touch? The "send" button does not light up.
First of all, you need you have at least iOS 5 installed. Second, the person you are texting must have an iDevice with iOS 5 or higher installed. You can´t send messages to an non-iDevice. You´ll also need an Wi-Fi network to send iMessages. Hope it helped!
Message was edited by: AppleTechTalk1100 -
I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!
Do you have something entered in the Subject field?
-
I have 2 people in my contacts that I'm unable to text. The SEND button does not respond
I Have 2 contacts that I'm unable to text to. The SEND button does not respond. Other contacts will send message.
Hi Gaylene1949,
So the issue is isolated to two contacts only.
There are a couple sections in this article for troubleshooting contact specific issues.
iOS: Troubleshooting Messages
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
and
If you still can't send or receive SMS, follow these steps
Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Thank you for using Apple Support Communities.
Nubz -
The off button does not switch to 'hibernate' or lock when playing music.
The off button does not switch to 'hibernate' or lock when playing music. I have to hold the off button down
for a prolonged period of time to get it to switch off; have had to resort to holding the off button and the main
button simultaneously to reset but no improvement.- First try restoring the iPod from backup via iTunes.
- If problem persists, restore to factory defaults/new iPod.
- If still a problem than you likely have a hardware problem and an appointment a the Genius Bar of an Apple store is in order. -
Can anyone tell me why when I type a very long email, the send button is not highlighted anymore when I am done and I can't send the message? And I can't seem to save the message or anything and as soon as I touch a button, I lose the whole thing. Any suggestions?
Have you tried typing and saving using Notes or word processing Apps before sending message?
-
I can only respond to messages. I only can send messages to a persons iPhone but when I try to send to their iPad it says incorrect email for said person but it the email they used when messaging me?
Read this thread, it's a bug that many are experiencing:
Cannot send emails from contacts -
When I compose a new message, the Send button does not appear in the header. It works normally when replying to another message. I can compose a new message, but all I can do is save it as a draft. The connection doctor shows everything is normal, and there have been no changes to account preferences. What is going on?
MacBook Pro Mac OS X (10.4.8)Hello redcedar,
You must have resolved your no send button problem by now, or at least know what the problem was. I have the same problem and I can't find the answer anywhere. Any feedback would be greatly appreciated
jeydee -
I cannot send any messages from my iPad. The send button is not lit up. My setting are on. When I put the address in it comes up in red with an exclamation mark
Delete the account, then re install it on the device. You will need to get the passwords exactly right., and there are some other settings that matter, such as send and receive server names, and sometimes a specific port. If you are not sure, check on the web for ' email settings' for your particular provider. What probably happened is that when you changed your password, some other setting got tweaked.
-
New iPad3 and it's not letting me send text messages.....the "send" button is not high lighted....
I've already tried everything listed in these links.
I've also resync'd email accounts via iTunes between my Air and iPad3.
Messaging works OK on all my other devices using the same account settings.
Problem started around May25th.
(and yes, I already posted back then under a different ID with no resolution).
There has to be a simple solution.
I'm presuming some sort of conflict with iCloud, but not sure.
Any other ideas? -
I cannot send a reply in imessages. The blue send button does not work
I am using an Ipad. I cannot reply to a message in imessage. The blue button does not work anymore.
Do you still have a BitDefender directory in program folders, usual location is C:\Program Files\BitDefender\
If the directory still exists, the uninstall did not complete fully. BitDefender recommend downloading the uninstaller and running it again. You can get the uninstaller from http://www.bitdefender.com/uninstall
If that does not work, you can try manually removing the toolbar. Do you have a folder called C:\Program Files\BitDefender\BitDefender 2009\FFToolbar
The "BitDefender 2009" part will vary depending on the version of BitDefender installed. If that still exists try deleting the contents of the FFToolbar folder.
BitDefender is likely to have added an entry to the Windows Registry, if you are happy with editing the registry you can remove the entry, for details see the "Windows registry extension" section of http://kb.mozillazine.org/Uninstalling_add-ons
'''Warning: Only edit the registry if you know what you are doing, making an error in the registry can cause serious problems with Windows, it may even prevent Windows from starting.''' -
I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.
It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field. -
Sometimes when sending or replying to a message through face time my send button does not work. If I close the app and reopen it the send button has worked but not always. This is very speratic.
Hello cjtulowiecki,
You’re having problems with the computer not booting sometimes.
Do a hard reset.
Power off the computer.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
Next test all the hardware in the system.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day. -
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
Wrong Sender Agreement:The Sender agreement does not have channel
Hi Guys,
I am trying RFC to File scenarion where I am triggering a report which is calling a RFC module I have given the destinaztion name correct .When I am executing the report it is failing giving the following error
"Wrong Sender Agreement:The Sender agreement does not have channel"
I have checked that sender agreement is there.
Also when Iam changing the RFC call by removing IMPORTING parameters and adding IN BACKGROUND TASK It is getting executed and goin to XI successfullly but after adding IMPORTING Param it is failing ?
Any suggestion on the same?
RegardsHi Guys ,
I have tested the same again from RFC directly without Report and after some time it failed giving 'SYSTEM ERROR'.
When i checked the channel it is giving following error:
Error: 2008-01-10 13:36:19 IST: Message processed for interface Z_RFC_TESTSYNCASYNC: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
Any help now ?
Regards
Maybe you are looking for
-
Query: Correlation ID and Correlation sets.
Hello, Can somebody please brief me about the Concept and implementation of the correlation ID and correlation sets ? Thanks in advance.
-
From VMware to Azure no extensions installed and DVD not recognized
Hello! I'm trying to migrate a VMware RHEL VM to Microsoft Azure using Microsoft Virtual Machine Converter to convert disks and upload them. Before all this, i've prepared the vm as documentation indicates (http://azure.microsoft.com/en-us/documentat
-
ITunes shuts down when I connect my IPod
Hello to all. Everytime I connect my IPod to my PC, iTunes shuts down. If I disconnect the IPod, I can use iTunes. What happened? I already installed the newest software. The problem is new for me, some days ago I could use ITunes normally with my IP
-
How to get in to macbook 08 with out password
how can get into an early 2008 mac with out password
-
HT1692 i have trouble in saving invitation from an outlook mail to my i phone calendar
i have trouble in saving invitation from an outlook mail to my i phone calendar the invitation is received as follows: mime.attachement.ics