DVD Burning Poor quality

I created a slide show in IPhoto including the "Ken Burns" effect. I also added four audio tracks to the slide show. I transferred the file to I DVD with sharing. Two audio tracks were dropped in the transfer and the resulting image quality was poor. Images were wavy and some had skips and tiling. Also the audio tracks that remained sounded like the artist was gargling the words. I'm a recent Apple convert and my I book is only 2 mo. old. Do I have a malfunctioning DVD burner or am I doing something wrong?

Similar Messages

'ken burns' poor quality interlacing jagged

This post is to document issues with 'Ken Burns' rendering in Final Cut Express 4 and some workarounds and possible bugs in software I found.
Similar posts about this issue:
https://discussions.apple.com/message/5207261#5207261
When I import images into final cut express and apply keyfram effects with panning and zooming a.ka. the 'Ken Burns Effect' I find that image quality is very poor. This occurs in most BUT NOT ALL images in viewer and canvas windows as well as rendered footage. The video issues are severe interlacing artifacts (horizontal blurry lines) as well as motion jitter along edges.
Many other users on the web suggested the following, which did not work for me:
-Avoid using JPEG files because their compression introduces artifacts which causes problems for Final Cut
I have found both JPEG and TIFFs have trouble with Ken Burns, although I do have certain TIFFs that seem to work.
-Using different software to render ken burns panning.
This seems silly to me. I find that the integration of pan,zoom necessary for fine tuning during editing. This would be extremely time consuming to separately generate each pan/zoom clip and import. I have heard that some software has high-end smoothing, but I am satisfied with the images that do pan and zoom correctly in Final cut.
-Adjusting Field Dominance in the clip properties to none
this was already set on my clips
-Adjust render settings.
I saw a 1001 rendering 'recipes' offered up to fix image pan/zoom issues. None worked
Things I discovered
Ken burns effect looked great when the image was in a transition, but bad when it was not. For example: Imagine a 5 second cross dissolve between regular video and ken burns motion image. When image becomes clearly visible in the latter 2.5 seconds of the transition it looks excellent while panning/zooming. When the transition finishes there is a sudden change to poor quality in the pan/zoom.
-The render bar on top of the timeline is dark-green for good-looking images, which according to the final cut manual, means 'no render necessary'
-There was nothing special about these render-not-necessary images that I could find in resolution, settings, etc.
-Good looking images were jpegs, gifs, and tiffs
I tried converting other images and reimporting, no luck
-I can make the ken burns look good for all images by playing the movie in the canvas window and setting it 99% zoom.
Any zoom level other than 100% looks good.
-This seems like a bug to me.
Eventually I just used a screen recording application called screenflow to capture my video playing in canvas window at 99% in real time.
This worked.
Hopefully someone can explain why rendered images never look good and what format works to get the dark green line and avoid rendering all together and these problems.
I don't mind converting file formats beforehand as long as they work well

The render bar on top of the timeline is dark-green for good-looking images, which according to the final cut manual, means 'no render necessary'
This is misleading. It simply means rendering is not necessary for playback. It does NOT mean that the material does not need to be rendered.
100% zoom level is as close to how your video actually looks that a computer monitor can display.
You never said what format you're working in.
You always have to render still images. You're making video, and they're not video.

Premiere Elements 11: DVD Burn horrible quality.

Hello!
I am having issues with getting a decent playback on a video I cut together for a friend.
It involves video shot with some high resolution images inserted in the bottom corners.
When I save as a .mpg file the quality is great, but when I choose burn to DVD with high quality both the video and images are extremely blurry and look to have been made low resolution.
There is only about two minutes of video so available space is not a concern. I've also unchecked "Fit Contents to available space". Is there a fix or work-around for getting a better quality DVD burn?
Edit: After more research I seem to have come across a common problem in that Premiere Elements cannot burn a decent quality DVD without using certain settings that unfortunately can only be played on Blu-ray players. I'm still hopeful that someone, somewhere, has found a way to get it to work with better results than sub-par.

DaVeachi
Problems with the same symptoms can (often do) have different causes. The answers are in the details.
On what computer operating system is your Premiere Elements running on?
A just in case note at the onset....DVD-VIDEO on DVD disc has a frame size of 720 x 480 (NTSC) or 720 x 576 (PAL) whether
DVD-VIDEO standard 4:3 or standard widescreen 16:9. "HD video" can have frame size of 1280 x 720, 1920 x 1080, or 1440 x 1080 HD anamorphic 16:9 which is stretched to 1920 x 1080 for display after encoding.
What are the properties of the source media on that Timeline - video and audio compression, frame size, frame rate, interlaced
or progressive, file extension, pixel aspect ratio?
What is the project's project preset that you or the project is setting? See Edit Menu/Project Settings/General Editing Mode, Timebase,
Frame Size. The program does not always give the "right" setting and defaults to 1080i which may not be a good match for your source.
Then you set the project preset yourself and then import the source.
If interlaced video source, field order may enter into the equation since DVD-VIDEO on DVD disc is characterized by interlaced video, lower field first.
You talk about what sounds like picture in picture. What are the pixel dimensions of these photos that you are using for the picture in picture. How many of them are there in this Timeline?
You are not doing yourself any favors leaving "Fit Content to Available Space" unchecked. More on that later and advise put a check mark for that option. Important...when you are in the burn dialog for your typical project, what does the Quality Area there show for Space Required and Bitrate (with and without a check mark next to "Fit Content to Available Space"?)
What are selecting for your preset standard 4:3 or standard widescreen 16:9 type, and is your program install for NTSC or PAL.
Let us start here and then decide what next.
Thank you.
ATR

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Export to HQ DVD very poor quality

Hi all,
I've been trying to export to an HQ DVD, meaning I've chosen the highest settings, ending up with a 5552Mb File for 75 mn... which I believe would be enough to have a very high "normal"definition .
ok I know it wouldn't fit but I burned 10mn of timeline with these settings, to check, and the quality is very poor. I believe as bad as a VHS second generation copy... My titles appear like a very low photoshop jpg compression, and all lignes and shapes are surrounded by some kind of compression artefacts not acceptable even in normal def. (not mentioning the interlaced lines at the edit point when the clip has been altered in size or color etc...) You get the picture...
I had a look at the calculator, that is not much help finally when exporting from premiere.
What I want to do is export my (xdcam hd 50mbps 1080 50i).mxf timeline to a beatiful dvd that everybody can play....
Should I go for a third party encoder?
Also, It seems that when I export and burn through Encore, I get a slightly vertically stretched frame, that ellipses the perfect circles I have on the timeline. Although I respect the pixel ratio of 1.0, 16.9 screen... wide screen etc... I always get this stretching. (Playing the file from the pc is correct.)
What puzzles me is to see some nice SD DVDs around, burnt from HD files and I'm not able to get at least the same results from a broadcast approved camcorder and premiere CS6.
Export settings are:
Help please... Thanks.

Glad to help.
I have been using Encore every since it was first released and on many occasions I have pruduced MPG files encoded at different rates so that I can demonstrate to the audience at my presentations how the different settings can affect the end MPG movie
With Encore I have found that the settings I gave you earlier give the best compromise results, in my tests having the max setting at its max position and the target above eight can produce flawed mpeg files. this is not as a resullt of one off encoding but I have repeated it with each version of Encore with varying results, certainly using Encore in my CS5.5 Suite produces softer DVD's than earlier versions, in my opinion that is..
With HD source my Panasonic HMC 150 Encore produces reasonable MPG SD files but the Canon 7 D produces more artifacts.
Enough of a remeniss and ramble, good luck
Addiitonally with the completed DVD there is a distinct difference depending upon which DVD player is used, using the same DVD my Sony 3D bluray player upscales better than my Panasonic Bluray recorder, whereas at a club I go to the Pioneer AV amp upscales the DVD even better, therefore I would conclude that the device playing back the DVD can have a vast effect on what you see.

Dvd playback poor quality on new iMac

Upgraded from 2006 iMac 24" to a new iMac 27" / 2.9 Ghz, nVIDIA GeForce GTX 660M Graphics (512MB), with external Superdrive. My old iMac played standard DVDs with very good quality at full screen. The new iMac plays standard (commercial) DVDs but the video quality is poor, inferior to the old model. Is this due to the graphics card, or just a reality with the Retina display on this iMac, or some other reason? Do I need to purchase a Blu-ray player and third party playback software to get better resolution?
Thanks.

Yes regular DVD's were not intended to display in higher resolutions. You can try decreasing the screen resolution while watching these movies then changing it back. Or go with Blu-Ray and 3rd Party Software.

DVD burning and quality

While there was a choice of quailty on IDVD, is there the same by burning direct from FCPX?. If so, how do i get the best possible?
Thanks

I don't think it matters for a project of that length. In fact for a short project like that generally best performance in iDVD may well serve you better than best quality as it uses a constant bit rate and you have space to spare on the disc. It depends on the content however.

DVD poor quality

I just created a DVD but the video quality is too poor to use. I get 'ghosting' or flicker with motion, which is 99% of the content.
A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
I exported the video to Adobe Media Encoder (4.0.0.374) to create a F4V file to be used on websites. I used the standard preset. The quality of the F4V video is good.
I then used Adobe Dynamic Link to export to Encore CS4 (4.0.0.258). I burned a DVD and the result was a DVD with poor quality.
There is a brief clip in the highlight video that I recorded myself of the athlete providing a short introduction of himself. That clip and the still titles I made look good on the DVD, but the highlight clips from the client's DVDs are very poor.
From some of the discussions I've already read in this forum, I assume I need to change a field option or the Anti-flicker value under Effect Controls or something similar, but haven't figured out what yet. Also, when I make changes to values, do I have to burn a DVD to see the result of the change or is there a better way to preview?
Thanks for your help!
Dan

A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
It is very likely that the double MPEG-2 encoding is degrading the material too much. Is it possible to get back to the client's original tapes? That would save one MPEG-2 compression. Otherwise, what you have is probably as good as it will get.
Good luck,
Hunt

DOH! Poor quality output after 4 days trying to perfect the DVD

Hi guys
I have been trying to burn a 1hr 27min .avi file (700MB) for 4 days now. Ive tried a few ways but each time the DVD has poorer quality video than the original file.
I tried:
- opening .avi file in ImovieHD and then sharing it with iDVD (it refused to burn it, after going thru the whole rendering encoding process mind you)
- going straight to iDVD (definitely it would not burn)
- opening in QT Pro and then 'stream as DV'. which i opened in iDVD and saved as disc image with menus etc. burnt using toast titanium - probably the best result so far i think)
however the dv file was worse than an mp4 file i created using iSquint from the .avi.
- have also tried just opening the avi in toast and burning from there. worse product than the previous one.
So, any suggestions? The main problem is things look quite jagged and a bit pixelated if you know what i mean. Where as the mp4 file, which ive played using iTunes and VLC, is quite smooth (but you can see there's still a bit of quality loss when sharp movements are made by the actors.(expected).
So I've lost lots of time on this stupid thing, but I just really want to sort out how to do it well once and for all.
Any help would be most appreciated.
Thanks

G'day Looneysbin
Sounds like a hardware problem. Is your drive under warranty?
For a start, try rendering your iDVD project to a disk image, instead of burning straight to disk.
Then, create a new Burn Folder on your desktop, and drag the VIDEO.TS file from the opened disk image to the burn folder (note that only an alias actually gets put in the folder).
Next, use Control-click on the Burn Folder to get the contextual menu, and select 'Burn Disc'. Follow the prompts, but burn at the minimum speed available.
This way, your apparent hardware problem won't mean re-rendering the iDVD file each time you try and burn a disc.
You can also keep the .img file on your hard drive as a backup of the disc.
You might also be having a problem with quality of the actual discs themselves. What brand are you using?
Regards
Santa

Poor quality video when burning a DVD

Hi All,
I have recently purchased & installed Premiere Elements 11 on my Windows 7 64bit Dell laptop. I found the tutorials very helpful and was able to successfully create my first project - importing a 46 minute AVCHD file4GB m2.ts shot on my Panasonic HC-V100 in Record Mode HG1920: 1920x1080 25f/s Audio 48kHz. When creating the project I selected: New Project>Change Settings>PAL>AVCHD>Full HD 1080i 25 andTicked ‘Force Selected Project Setting on this Project’ (I'm in the UK hence selecting PAL)
I added titles then created a menu and scenes using a still photo 2mb jpg 3456x2304 300dpi for the menu background. So far so good - really pleased with the results on screen. Next I selected Publish>Disc > selected AVCHD Add Name>Choose 1920x1080i>Burn to Folder. I then burned the BDMV Folder to DVD using the inbuilt DVD burner in my laptop.
This successfully produced a DVD with menus and titles which will play on my Blu-ray player. The quality of the video is excellent and I am delighted with the result however here is the first of the problems I'm hoping someone can help with: The background image on the menu is slightly blurred as are the menu/scene titles.
Next I wanted to produce a DVD for people who don't have a Blu-ray player & therefore need to play it on a normal DVD player. This is the second problem (and one I have seen mentioned elsewhere on the community). I published the project in a similar manner to the one above but with the following differences:
Burn to DVD Folder: Select 4.7>Type name>Browse to location. I now burn the VIDEO_TS folder to DVD, again using the the inbuilt DVD burner in my laptop however this time the result is very poor. The menu doesn't work and the quality of the video is unacceptable. Of course I understand that the result will be considerably lower quality than with the AVCHD version however this is not watchable.
(BTW, prior to purchasing Premiere Elements 11 I had been playing the video from my camera into a Sony RDR-HXD910 hard disc recorder then burning DVDs from that device using SP mode. This produced DVDs with perfectly acceptable quality so I must admit that I was hoping for similar results from Premiere Elements.)
I have read on the community that DVDStyler is a preferred method of burning DVDs however afer downloading it I failed to find a way of using it for simply burning my existing VIDEO_TS folder.
This is as far as I have got and now would really appreciate some help to point me in the right direction to be able to burn my project onto ordinary DVDs. I have tried to put as much information on the post as possible but I am new to video editing so have probably missed or not described something!
Thanks in advance
Simon

ATR,
Thank you for helping me out.
To answer your questions:
--Do you really need NTSC DVD-VIDEO standard 4:3 on DVD disc or is NTSC DVD-VIDEO widescreen 16:9 on DVD acceptable?
I was told that product specs require 4:3 aspect ratio for DVD. (Unfortunately footage was all shot in 16:9 before I found out about the 4:3 finished requirement.) I want to generate the highest IQ possible in this format.
--Is your 1920 x 1080p 30 or 25 or something else?
All video was shot at 1920 x 1080p 60fps. AVCHD.
Video Source Properties as obtained from the Timeline:
Type: MPEG Movie
Image Size: 1920x1080
Frame Rate: 59.94
Source Audio Format: 48000Hz – compressed - Stero
Project Audio Format: 48000Hz – 32 bit floating point - Stereo
Pixel Aspect Ratio: 1.0
--What exactly is set as the Premiere Elements project preset for the project that has this 1920 x 1080p footage on its Timeline?
PROJECT SETTINGS
Editing Mode: AVCHD 1080p square pixel
Timebase: 59.94 fps
Frame Size: 1920x1080
Pixel Aspec Ratio: Square (1.0)
Fields: None (progressive scan)
Display Fomat: 60fps Drop-Frame Timecode
Title Safe Area: 20% horizontal, 20% vertical
Action Safe Area: 10% horizontal, 10% vertical
Audio Sample Rate: 48000Hz
Display Format: Audio Sample
--When the project preset was set, did you use NTSC or PAL section in the new project dialog?
I didn't make any choices. I didn't use the new project dialog. I imported media and started working. When I saved, I made no choices. Since I'm in the US and bought this from Amazon, I assumed it was NTSC, and that appears to be the case.
--Is your program version 12?
Yes.
Motivated by a different thread regarding titles and 4:3, I did create a test "movie" (not DVD) at 4:3 and all the titles fit within the image area. (I even made a point of inserting a couple of titles that ran outside the "safe" area in the PRE Titler; these also all fit on the image although they came closer to the edge. Not crowded, but perhaps not as aesthetically pleasing as those that were created within the limits.

Poor quality (vibration) on video clips when it burns onto DVD

We created 15 mins video on Final Cut Express, saved on Quick Time, and burned onto DVD. Although the video on Quick Time was fine, some of the quality of the video clips on DVD we burned was so poor....It had so much vibration on some of the video clips. We tried on both Best Performance & Best Quality, but they both had poor quality. Do you have any suggestions? Do you think upgrading to I Life 08 will help? Please Help!!!! Thanks!

It had so much vibration on some of the video clips.
Video on a DVD is mpg-2 compressed (which looks at frame to frame differences in compression) and is interlaced.
If you have content with lots of movement - like many hand-held shots - mpg-2 compression and interlacing will act to create lots of 'jumping' or 'vibration'. The only solution is to use a tripod and avoid shaky, hand-held shots.
BTW, for a short clip, 'Best Performance' will give you the best quality you can get.
F Shippey

I have created a slideshow in iPhoto and then used iDVD to burn the sideshow to a DVD. The quality of the DVD is poor. Any ideas?

I have created a slideshow in iPhoto and then burnt it to DVD using iDVD. The quality of the slideshow on the DVD is poor. Any ideas?

Poor in what way? iDVD creates standard definition displays of 640 x 480 pixels and will not look as sharp as the orignal photos in the iPhoto slideshow on a Mac monitor.
OT

Poor quality burns

My burnt discs are of poor quality. Some images are fractured around the edges. Others are simply not sharp. I have tried using both +R and -R discs but the problem remains. Very disappointing as I have been working through Final Cut Express HD for the first time. Any ideas?

Hi
Just to add to Kasas good answers.
1. iDVD 6 has two levels of qualities.
• Best Quality (movies up to 120 min) - slightly lower quality than - se below
• Best Performances (movies less than 60 min) - Highest quality on final DVD
2. From FCE/P - Export out as full quality QuickTime.mov
iMovie - Don't use Share/Export to iDVD = destructive even to movie project and especially so
when the movie includes photos.
Instead just drop the iMovie movie project icon (with a Star on it) into iDVD theme window.
3. I use Toast™ to make an as slow burn as posibly eg x1
4. There has to be about or more than 25Gb free space on internal (start-up) hard disc. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
Yours Bengt W

I must be doing something stupid: Very poor quality DVD rendering!

I am new to Apple products and after trolling this forum, I was able to create a DVD using iDVD on my Mac mini Core Duo - 2Ghz model. But, the video is of very poor quality (compression artifacts). I am lookging for guidance to creating a better video quality. But first, let me give you some background...
I have created enough DVDs for my home videos captured both from my S-VHS camcorder and min-DV camcorders (both PAL and NTSC) using Pinnacle Studio (buggiest software in the world) and Adobe Premiere Elements under Windows. I have clear expectation of video quality and understand the quality differences between various standards.
I have a fairly new toy - Canon Powershot TX1 digital camera which is an amazing compact camera that shoots 720p video @ 30fps and stores them in MJPEG format. Very good optics (10x optical image stabilized zoom). The only con is that it has very poor low light shooting ability.
The steps I took to create this DVD...
1. Import the .avi and .jpeg files from my camera into iPhoto library.
2. Use iMovie (all part of iLife'08) to stitch the avi clips and also some of jpegs. Added transitions, titles and music in iMovie.
3. Also, added some of my old low resolution avi files (from my older Canon camera - probably in 640x480 resolution).
3. Exported it in the largest file mode (960x540) which created a 1.8GB file.
4. Opened this movie file in Garageband and added the Chapter markers.
5. Shared it with iDVD which automatically launched iDVD and showed the chapters in very nice scene selections menus.
6. Invoked the Burn menu to burn the movie into a DVD using iDVD.
Am I using the right methodology (I want the chapters)? I also observed that an earlier project which was pure 15 minutes of 720p content created a 4.7GB size exported file from iMovie whereas this current project has 51min of avi (of which about 10min is low res and the rest is in 720p format) and 12min of still photos produced a 1.8GB file when exported. This clearly tells me that the exported file is of poor quality. Why did that happen? Was it because I mixed the content and included low res videos?
I should probably try creating a DVD from the pure 720p content and see how that looks.
Any pointers would be a great help. BTW, the mac mini, iPhoto and iMovie forums are just awesome. The quality of posts and responses is very high.

Thanks a lot, F Shippey.
I exported it as a .dv file and then I was able to produce the DVD correctly with the Revolution theme and 11 chapters. I haven't done any editing any clips yet in iMovie. In most cases, I will not need to do that in most cases as the Canon TX1 creates individual avi clips every time I record and stop a recording. Having used a camcorder for over a decade now, I know how silly most of the recordings are.
I will be rendering most of my videos as h.264 so that I can use the mac mini as a media server instead of using DVDs. I have to rip my own DVDs as h.264 soon (back to handbrake).
PS: While creating my first DVD in OS X + iLife'08 tools, I noticed the following bugs:
1. The clips disappear from the display in the editing window when the project becomes large and I had to zoom in and out to make them reappear. I verified that I wasn't viewing past the end of the last clip. If I hover the mouse in the blank window, it will show the clip in the preview window on the right.
2. I had 11 chapters marked in Garageband and then I shared it with iDVD, it created two pages of scene selections with 6 chapters in each page. In the 2nd page, it added a random window (unconnected) for the 12th chapter that I didn't have. I didn't check for that and so my finished DVD has this weird 12th chapter with a copied moving clip in the window, but when selected, it doesn't do anything.
These two bugs are way few compared to what Pinnacle Studio threw at me.
Message was edited by: new2appletv

Poor Quality DVD with AVCHD input

Hi all:
I did not find this addressed on the iDVD pages or this page. I have imported AVCHD format video of my son's soccer game. Used iMovie08 7.1.1 to edit it. I was shooting in sports mode. It looks great connected directly to the TV.
After rendering the movie (takes forever!) and burning a DVD, the quality output on my 50 inch tv is horrible. I tried using Xbox, the older PS2 and an built in older DVD player. The quality was poor especially when tracking the ball and the players (panning) across the field. I shot in wide format and burned in that format. Am I missing something?
Is there something I can do? I spent all this money on the Canon HF10 and would really like to see it and share it! Also, is there a faster way to import besides the USB port? I know...a computer upgrade is also in my future.
Thanks in advance.

Steve Mullen wrote:
What you are describing is nothing more than using iMovie 08 with iDVD in a fully logical--yet wrong--way. To see you do not need to have poor quality from FullHD, go to http://www.vimeo.com/user364340/videos
HEY, AM I READING THIS RIGHT, (yeah I'm shouting)
Your telling us you know how to use im08 and iDVD in some way that (apparently) no-one else knows but you won't share it, at the same time as advertising your book in your signature. I think you should be reading the terms and conditions of the forum here.
Oh and by the way, while the video in the linked clips is indeed crisp and clear it stutters like a nervous old man with Parkinsons, not sure if the clips are yours but have to wonder if your books merely tell us how to make less than acceptable video.
Tom Wolsky writes some really excellent books but is quite happy to share his knowledge for free and has helped 10's of thousands of people in the video forums. Indeed Jon and Karsten from this very forum have shared their considerable knowledge in the form of online written and video help.
Get a grip Man.

DVD Burning Poor quality

Similar Messages

Maybe you are looking for