DVI to HDMI via adapter: video hiccups

I have a 13" MacBook (Late 2007). I connected a Belkin mini-DVI-to-HDMI cable to it, which I plugged into my Sony 32" LCD TV.
When I play back TV shows that I have purchased in iTunes, the video hiccups -- that is, pauses for a fraction of a second -- every few seconds.
In System Preferences, I tried turning on Video Mirroring, thinking that it might ease the CPU load on the MacBook if it were just dealing with one image. No change. I also tried bumping down the resolution for the TV (again, in System Preferences), and a few other tweaks, but nothing I did made the hiccups go away.
I know it's not a brand new machine, but geez... you'd think that 2 x 2GHz would be fast enough to play back the videos that Apple sells me.
Any suggestions?
Thanks,
DM

Okay, after further research, I discovered that when I changed the resolution from 1600 x 900 (which Leopard defaulted to when I connected the TV) to 1920 x 1080, a new refresh rate option appeared: 24.0 Hertz. Choosing that rate seems to have solved the hiccup problem -- for the most part. I still notice one every now and then, but they are very slight compared to the ones I was getting before.

Similar Messages

Mini-Dvi to HDMI or S-video, also sound issues

Hello,
I want to connect my iMac with a Mini-Dvi port to a TV and want to hear the sound from the TV.
What adapters will i need to hook it up to a HDMI port, and will this connection also produce sound on the TV?
If that can't be done can I use a s-video adapter, and what about sound?
Last, do they have longer cables so you don't need your computer right beside the TV?
Thanks
Message was edited by: Abram George

Abram George wrote:
What adapters will i need to hook it up to a HDMI port,
You'll need Apple's mini-DVI to DVI adaptor plus a DVI-to-HDMI cable
(or a DVI-to-HDMI adaptor and an ordinary HDMI cable).
[DVI-D to HDMI cable|http://www.monoprice.com/products/product.asp?cid=102&cp_id=10231&cs_id=1023104&pid=2505&seq=1&format=2]
[DVI-D to HDMI adaptor|http://www.monoprice.com/products/product.asp?cid=104&cp_id=10419&cs_id=1041902&pid=2029&seq=1&format=2]
... and will this connection also produce sound on the TV?
No. There are no audio signals on the mini-DVI connector. You'll have
to run a separate audio cable from the iMac's audio output to the TV.
The iMac's audio output is a "combo jack" that supports either analog
or digital (optical S/PDIF) audio. Your TV probably has an analog audio
input associated with one of its HDMI channels.
... do they have longer cables
[HDMI cables: 1 ft to 100 ft|http://www.monoprice.com/products/subdepartment.asp?cid=102&cpid=10240]
...the web knows ALL,
Looby

Best way- p7-1380t dvi to hdmi connections to a monitor HP w2207h

Have 2 DVI outputs from computer - current hookup using DVI to VGA. Want to hook up DVI to HDMI. Are there any advantages? and, best way to do it?
This question was solved.
View Solution.

GDicker, welcome to the forum.
Here is an explanation of both connection types:
DVI to HDMI
DVI is a digital signal in the same format as the video portion of HDMI. The difference is that DVI doesn't carry the audio signal like HDMI does. This means that if you are only using the video signal you can use a simple DVI to HDMI plug adapter that changes the physical connections. If you want to go from a DVI source with audio, you'll need an active converter to combine the video signal from the DVI source and the audio into the HDMI signal.
As you can see, DVI is a digital video signal and HDMII is a digital video and audio connection. Simply using a DVI to HDMI adapter is only going to give you digital video. Therefore, the advantage of the DVI to HDMI will be to give you a digital signal. VGA is an analog connection.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

No video output from MacBook Air micro DVI to Polaroid HDTV via DVI to HDMI

Grrr! What's going on? The Apple online store finally sent me a micro DVI to DVI adapter and a DVI to HDMI adapter cable as well as headphone output to RCA adapter cables (for separate audio, since DVI will not transmit audio) and I hooked it up and - NOTHING! When I initialize the appropriate input setting on the Polaroid 27"HDTV the MacBook Air seems to get some sort of query signal as its screen flickers for a moment and turns to a grey screen for a couple seconds but then, that's it! Nothing! The Polaroid's screensaver remains and no signal, audio or video, is transmitted. Now, the micro DVI to DVI adapter is Apple proprietary so I don't think it is a DRM related issue where the chip might block the video signal coming out of the MacBook Air. The longer, DVI to HDMI adapter cable is by Belkin. Am I overlooking something? Could the new 27" Polaroid HDTV not be compatible with DRM protocol? I don't think so since all digital TVs equipped with an HDMI input are supposed to have DRM compatibility built in. What gives?

Well, BSteely, where to begin? After my extensive discussions with more than one support engineer at Apple in Toronto as well as in Austin an interesting picture is emerging. Seems that I'd omitted a few things: First, I was not trying to display HD content but rather standard definition content. Second, I made the mistake hoping for an elegant and easy solution in hookup via HDMI (new flatscreens don't even have a DVI port anymore) - bad mistake! As one of the technicians put it, HDMI is an "unsettled" platform when it comes to HDCP, currently in version 1.4 , meaning, I should have tried VGA instead, a "settled" platform after all. Now, whether this will work remains to be seen because I don't have a micro DVI to VGA adapter yet but suffice to say that in essence I've been getting the message from Apple that, yes, the MacBook Air will - in the near future - support HDCP, but for now it does not contain the necessary software simply because HDMI is in its forth incarnation; plus, as they put it, Apple can't be responsible for testing compatibility with every single HD television set on the market - while it is true that there are thousands in existence, at the same time there are only four versions of HDMI with different HDCP specs! So, while I may be partially answering my own query here, it seems that Apple at this point is not particularly eager to make this software available because they rather would like to sell their new displays with the micro DVI ports instead of us endusers being able to hook the computer video signal up to just ANY monitor or TV. In the end, it is my hope that they will reconsider and not forget who their customers are, maybe after the Christmas season....

HT2809 No video from MacPro3,1 (2008) to NIKO SV3706 LCD TV via DVI to HDMI cable.

I connected a DVI to HDMI video cable from my MacPro3,1 (2008) to a NIKO SV3706 LCD TV - and got a blank screen. The TV does NOT indicate "no signal" - as it does on unconnected inputs. (BTW: It works via DVI-VGA.) Any suggestions?

I would say he card is partially failed.
Problem with card ATI Radeon HD 2600 XT for MacPro early 2008
Video Card Problem? -> Mac Pro (2x2.8 GHz Quad) w/ ATI Radeon HD 2600 XT
Replacement Program - ATI Radeon HD 2600 XT video issue

Will DVI to HDMI adapter on MBP carry both sound and video ?

I have an older Duo Core 3.1 MBP 15". Will the DVI to HDMI adapter carry both the video and audio channels for TV viewing ?
Thanks,
RL

DVI does not carry audio but there are adapters that add digital audio DVI to connect to HDMI.
<http://www.hdtvsupply.com/dvi-audio-to-hdmi.html>
You will also need to convert the optical to coax digital
<http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=2948&seq=1&format=2>
and optical Mini-Plug to Toslink
<http://homeavcables.com/260-710.html>
It would be cheaper to use a cable from the computer's audio output to audio input on the TV.

Cannot Connect Imac 24" via mini dvi to HDMi adapter cable to Sony Bravia 3

Hello Everyone,
I'm having the worst time in trying to connect the following:
1. Imac 24" 3.06 dual with dvi connection
2. Mini dvi to HDMI adapter (this mac with this connection was produced only for a short while!).
3. 10' (foor) HDMI wire
3. Sony Bravia 32" model KDL32L-5000 with 3 HDML connections
i.When I wire everything up, I keep getting"no signal" on my Sony Bravia TV.
ii. It doesn't matter whether I connect the HDMI wire to HDMI 1,2, or 3 on my Sony
iii. On my Imac Hard Drive>>Applications>>System Preferences>>Displays
all I get is a list of different resolutions. There is no mention or mirrors etc.
Nothing happens when I press "Gather Windows" or Detect Displays"
Can someone out there please help!!!!!
Can you also give any solution in very simple and small detailed steps!
Thanks,
Stacey Bindman
Montreal

Majortrout, there is a major disconnect going on here.
1. You are showing an Ebay link with a mini-DVI to HDMI adapter.
2. You report that you have an Early '09 24" iMac.
3. That iMac does not have a mini-DVI port. That iMac has a mini-DispayPort.
4. You need a mini-DisplayPort to HDMI adapter.
It is physically impossible to attach the adapter to which you link at Ebay to your iMac. So you need to take a step back and figure out what you really have; which iMac, which adapter, etc.
Dah•veed

Does the mini DVI port cary audio if using a Mini-DVI to HDMI Adapter?

Hello everyone,
I've heard it is possible for a DVI port to transmit audio data to a HDMI connection if a DVI to HDMI cable is used, which will allow the sending of both audio and video to your TV. see: http://en.wikipedia.org/wiki/DigitalVisualInterface
I'm assuming this is not possible using apples mini DVI port, but just wanted to check to make sure. My main goal is to get surround sound out of my powerbook. To do this by simply adding a Mini-DVI to HDMI Adapter would be GREAT!

Hi Jonathan,
I'm assuming this is not possible using apples mini DVI port
Yup, no audio, unfortunately. The audio will have to transmitted separately via the analog audio output.
Yang

VGA vs Mini-DVI to HDMI adapter

I'm about to buy an external monitor to use with my MacBook Pro late 2008. I do understand HDMI (digital) looks much better than VGA (analog), so I'm thinking about buying a Mini-DVI to HDMI adapter. My questions are:
Does the Mini-DVI to HDMI adapter decrease video quality? Is it noticeable?
Is it worth buying the adapter? If so, are there any known issues with third-party adapters?
Thanks in advance for your time!
João

If your macbook has mini-DVI then HDMI or no HDMI you will not get any audio passed through the HDMI connection because DVI does not pass audio. You would need to pass the audio separately via analog stereo line out.
But what difference does it make anyhow? You intend to use this as a monitor as opposed to hooking it up to a HDTV.
So long as you use a digitial interface HDMI, DVI, mini-displayport, etc. you are not going to loose any quality. It's digital. It either works or it doesn't. VGA, being analog, will of course be less quality.
I don't even know why you care about converting to HDMI when you could just convert mini-DVI to standard DVI and use a monitor that accepts standard DVI. They're plenty of those around.
Another consideration with a DVI interface is that if the monitor has a resolution greater than 1920 x 1200 you need a dual link DVI adapter as opposed to a single link DVI adapter.

HDTV won't display as mirror or extra display via mini-dvi to HDMI

Hi
I have a MacBook running 10.5.7 connected to a 1080P-capable Toshishba TV (model 42XV555). I also tried this with 10.5.6 with same results.
They are connected via a "shuttlez" mini-dvi to hdmi dongle and then via a "wegi" hdmi to hmdi cable.
The TV has three HDMI inputs, one designated for computer input via HDMI with a separate input for analogue sound.
THE MB recognizes the TV and displays a separate Toshiba-specific control panel with display control panel is up. It defaults to 1600x90 and 60Hz. The Macbook adjusts every time the tv is connected - there is communication - flashing screen, MB screen re-adjusts.
S-video works fine, via mini-dvi to s-video donglr, then svideo cable.
It has worked twice with the MB and connected with HDMI - just twice. I have spent hour after hour tweaking resolutions, re-booting, changing cables, HDMI ports on the TV etc! When it worked I could mirror and use the screen as a separate, larger display. It worked in clam-shell mode too.
My question is - are there any know problems getting this combination to work (ie MB, mini-dvi to HDMI)? It can work but I am missing some knowledge on the exact combination required.
What are the optimum settings to have this TV display HD from the MB, or come to that any HD 1080p-capable TV??

I'm attempting to connect my MB to a plasma 50 inch Panasonic TV, and am about to purchase the necessary cables from www.monoprice.com.
I've discovered so far that the HDMI connection directly between the MB and the TV (using the appropriate mini DVI adapter of course - product # 4852 at monochrome.com and an Apple HDMI cable which I'll return to get a better price at monochrome) transmits only video/pictures but not audio.
So far, an old, short RCA (red/white) 2-way audio test cable (again using the appropriate adapter to connect to the headphone jack on the MB) does not transmit audio directly to the TV.
1) Could audio be transmitted from the MB to the TV using a "Coax (RCA) to Optical Toslink Digital Audio Converter" (product ID # 2947 at www.monochrome.com) to connect directly to the TV (in which case, what digital audio cable would I need to connect the converter to the TV)? And if so, would it be stereo or mono?
OR...
2) Should I wait until I get my Onkyo surround sound system (later this week) to see if the RCA cable will transmit directly from the MB to the sound system?
Thanks.

Can I use a mini-DVI to HDMI adapter to use my HDTV as a monitor?

I've been looking into this and haven't found a direct and complete answer yet. I read this article that states its possible when using mini-DVI to VGA/DVI adapters, but didn't mention mini-DVI to HDMI adapters.
http://support.apple.com/kb/HT3413
Apple also doesn't offer mini-DVI to HDMI adapters, so where would be a good place to look for one and what do you think I should pay for it?

If you have a unibody MBP, you need a mini-Displayport adapter, not a mini-DVI adapter.
If you don't mind running a separate audio cable in addition to the HDMI cable from your MBP to your TV set, buy this adapter:
http://www.monoprice.com/products/search.asp?keyword=5311&x=0&y=0
If you want to combine video and audio into a single HDMI cable, buy one of these two adapters:
http://kanexlive.com/products/item.aspx?id=3323 (for two-channel stereo audio)
http://kanexlive.com/products/item.aspx?id=3495 (for 5.1-channel digital surround audio from sources that include it)

Mini dvi to hdmi adapter

I have ordered a mini dvi to female hdmi adapter for my MacBook...and hdmi cable to run to my Pansonic HDTV; so I can watch movies I rent from iTunes.
Do I need an additional cable for sound? If so, please inform what I need? I do have HDMI Audio input wht/red connections on back of TV. I just don't know what to buy if I need an additional long cable for audio?
Can I set this up to have video and audio connection with one cable?

I had a similar question a couple days ago. Below is a link to the discussion. It may help
http://discussions.apple.com/thread.jspa?threadID=1866409&tstart=15
I also recently started a discussion related to weather Mini DVI to HDMI adaptors really work. If any of you have insight on the subject please go to the linked discussion below and provide your expertise. Thanks in advance
http://discussions.apple.com/thread.jspa?threadID=1871277&tstart=0

Mini-DVI to HDMI adapter or Mini-DVI to DVI cable?

I know Apple has a couple different Mini-DVI adapters for their Powerbook and MacBook computers. I don't especially like adapters and was wondering if anyone knows of a Mini-DVI to DVI cable.
Also, with the gaining popularity of HDMI, do you think we will ever see a Mini-DVI to HDMI adapter or cable?

Hi,
I know it is changing the subject, but I've been long frustrated by Apple's penchant for odd connectors, especially video connectors. Remember old quadras with 13 pin D connectors, powerbooks with square connectors, 7100s with I-don't-know-what connectors? All the while, ye olde VGA 15-pin D-sub connector was on just about everything else - even gas chromatographs.
We also got that funny mini-dix (Digital-Intel-Xerox) Ethernet connector on powerbooks when PCs were outfitted with familiar RJ-45 jacks. I did see one other machine that had the mini-dix: a government spec Zenith notebook.
I'm surprised Apple didn't use a VGA connector on the Macbook, given its above average exposure in the educational environment and greater than average odds of being hooked up to a lectern in a distance learning room. Pretty much to a tee, every distance learning setup I've seen has a VGA cable at the presenter's lectern. I worked in a university IT department, and it was pretty common for our loaner laptops to come back missing just about any ancillary goodie that could be misplaced. It isn't so bad to have to routinely stuff a new $2.00 cat-5 cable in the bag, but a $20.00 video dongle - not so good!
If Apple just couldn't countenance the idea of a VGA connector, I wonder how hard it would have been to have a normal size DVI connector? At least DVI-to-VGA connectors are easier to find, and better, aren't so expensive.
Bill
Message was edited by: impulse_telecom

Mac Mini: DVI+TOSlink- HDMI Adapter, still fiction?

Hello
I've been studying for a while the best solution for connecting my early 2009 Mac Mini to my LCD TV and Blu-Ray 5.1 System. I didn't took long to figure out the "Mini-DVI->HDMI Adaptor for video" and "Mini-TOS->TOSlink for audio" scenario. The problem is that I'm short on optical inputs. After thinking it through for a while, it dawned upon me that a "DVI+TOSlink->HDMI" adapter would crack this one. This adapter would take the DVI video and the TOSlink audio signals from the Mac Mini and composite them into one single HDMI stream. It seemed far fetched that such an adapter would even exist, but I decided to give it a go.
At first, after some initial research, I only found adapters like the following:
http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ/ref=sr11?ie=UTF8&s=electronics&qid=1258995241&sr=8-1
http://www.amazon.com/Audio-Toslink-HDMI-Converter-Adapter/dp/B002N8PVTM/ref=sr14?ie=UTF8&s=electronics&qid=1258995241&sr=8-4.
Although they do convert the DVI signal to HDMI, the same can't be said in regard to the TOSlink audio signal. The audio part is not encoded into the HDMI stream, getting out through the same optical port it got in.
I was about to let it go when I found this adapter:
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011405&pid=5369&seq=1&format=4#feedback
The are a few customer reviews that specifically state it works flawlessly with the Mac Mini.
The questions are: has anyone tried one of these? Does it really works? It it really possible to composite an HDMI stream from DVI+TOSlink inputs? If so, will it be any quality loss associated to the conversion process?
Thanks in advance

Welcome to the Apple Discussions!
There is not really much converting going on with regard to DVI (D) to HDMI. I use the mini-DVI to DVI (D) adapter that came with my Mac mini and a Belkin cable that is DVI (D) on one end and HDMI on the other. The signals are compatible. But as you say I run a separate audio cable from the mini to my HDTV. That is the real conversion that is taking place in the "black box" devices to which you are linking; adding the audio to the video.
There is another route that skips the video output from the mini altogether, but it is a bit more pricey, USB. I know of two USB to HDMI "black boxes" that give you both audio and video in the HDMI stream.
Atlona USB to HDMI Converter. Model: AT-HDPiX
Grand HD Cinema
Dah•veed

Cannot connect Mini PPC 1.42 GHz to Panasonic Plasma via DVI-to-HDMI-Cable.

Saw this question many times but never found a real Solution for that...
I'm trying to connect an old Mac Mini Power PC 1.42 to my Panasonic Plasma. Using the DVI out and an Adapter to HDMI.
In the Monitor-settings, I can see that the PPC found the TV. It is shown as "Panasonic TV" in the settings when I connect the cable. This, I can see while using Teamviever on my iPad, because the TV stays black. The TV does not seem to receive any signal actually.
Does anybody know what to do? I can't imagine there's no solution.
Please help!!

Unbelievable but true! I've managed to solve the issue yesterday on my own.
For those who are interested and didn't find a forum that helped much, here is an easy manual:
Boot with normal Monitor using a normal DVI cable.
Start Teamviewer so you can follow the next steps on an iPad, iPhone etc.
Unplug normal monitor.
Now use a DVI cable with HDMI at the other end.
Plug in Panasonic Plasma TV by using the above mentioned cable.
Now the plasma stays black, no signal arrives. Look at the iPad via Teamviewer and open monitor settings.
This should show that the Panasonic has now been found.
Switch the resolution to 1280x720.
Tataaaaa!
The Plasma TV now proudly shows the content of your Mac Mini PowerPC. Play with further settings in order to optimize the display width etc. Set the TV to 16x9 manually.
Enjoy!

DVI to HDMI via adapter: video hiccups

Similar Messages

Maybe you are looking for