Dynamic 3Dmove for a component or bordercontainer

Hi
I trying to move a component and a border bordercontainer by using 3Dmove.
During the runtime of the application the target of the 3Dmove will change.
I do not wish to Bind the target dirclty to the 3Dmove but use the same 3Dmove on diffrent targets (not at the same time).
I have created a group called BorderGroup. where dynamclly a add the componentsits look like this
protected functionapplication1_creationCompleteHandler(event:FlexEvent):void
for(var i:int=0; i<numElementsInGroup; i++){
GetBorder.x=230;
GetBorder.y=50;
GetBorder.z=0;
GetBorder.id=
"jakov"+i;GetBorder1.x=230;
GetBorder1.y=50;
GetBorder1.z=0;
GetBorder1.id=
"jakov"+i;GetBorder2.x=230;
GetBorder2.y=50;
GetBorder2.z=0;
GetBorder2.id=
"jakov"+i;BordersGroup.addElement(GetBorder);
BordersGroup.addElement(GetBorder1);
BordersGroup.addElement(GetBorder2);
trace (GetBorder.id);
if(i==1){
jonymove.target= GetBorder.id;
trace (jonymove.target);jonymove.play();
if(i==2){
jony2move.target= GetBorder1.id
jony2move.play();
But it doesnt work
the line
jonymove.target= GetBorder.id;
Produce the following Error:
Error #1069: Property postLayoutTransformOffsets not found on String and there is no default value.Any idea what cause the problem and how to solve it?
Thanks

Hi
anybody?

Similar Messages

Dynamic visibility for a custom component

Hi everybody,
I have implemented dynamic visibility for my component and try to use it with the Xcelsius checkbox.
At preview my component is visible as the checkbox is checked.
I unchecked the checkbox then my component is no more visible, and it is works fine.
But when I checked the checkbox again, my compoenent doesn't appear any more...
Any idea ?

Hi Evan,
I am developing a component which requires "Dynamic Visibility" property.
Its an Icon component where I have to bind a value for Icon. (i.e 0-30 Smiley, 31-70 dash, 71-100 Frown)
The dynamic visibility works fine only when I bind both (Value for Icon, Dynamic Status) to the same excel cell.
Looks like Xcelsius wants all the bindings to be done to same cell in the Excel.
[Here|http://docs.google.com/View?id=dzf62p8_35gc73brzm] is my code for your review.
Please help me. Your timely respose would be of great help for me.
Thanks
Ravi.

Creating a application dynamically for a component

Hi,
Does any one know how to create an application dynamically for a component, so without using SE80?
I already found class cl_wdy_md_application, but I do not know if this is the right direction. Maybe somebode already solved this issue.
Regards,
Remco

Hi Thomas,
In SRM it is possible to call own made webdynpro components and fill them with data, and then process these data into a new shopping card. This can be done by filling a so called HOOK_URL. In SRM you have to do customizing and fill in the URL to be used of the WebDynpro application. So far, still no problems.
I have built a component by which an user can fill several Z tables and then he can display a form he has made by himself (a so called free order form). So the component will check all Z tables, and generate in one view, the context dynamically as also the layout dynamically. In all Z tables one field has been used as one of the keyfields and that is free order form name and this is also a parameter of the application so that this application knows which data to get from the Z tables to generate a form.
And because it is possible to generate more then one forms, I have create per form 1 application with the specific parameter, and this URL can be entered in the customizing of SRM.
This application creation I did myself, but now I want to accomplish, when the user creates a new form by filling specific tabels via webdynpro, that he can generate the application by himself.
Maybe I can create a FM/BAPI for the BDC recording and then call this from my web dynpro application as there is no API.
Do you maybe have another solution?
Regards,
Remco

Dynamic Playlist for streaming video

This is my first attempt at building a dynamic playlist for
streaming flash video and I'm following the tutorial at
"macromedia.com/devnet/flash/articles/video_player.html". I've
changed the paths to my FMS and loaded the video files to the
applications directory of the FMS (flash_applications/videosource).
The thumbnails load and the player skin loads but the videos do not
load when I click on the thumbnails.
I've read the earlier post about this same issue. I followed
the advice from that post and reloaded the 'main.asc' file from my
Flash 8 program files but the video still does not play.
Here is a link to the site so you can see the problem:
http://media.us.elsevierhealth.com/videosource/VideoSource1.swf
My FMS is 'media.us.elsevierhealth.com'
I believe my code is correct and I believe the paths I've
created are correct. If someone could review my code and check the
path info I would appreciate it. Here is the code from
'VideoSource1.as'
import mx.video.*;
//Set up the list box, call function VideoThumb to create the
actual thumbnails
list.rowHeight = 70;
list.cellRenderer = "VideoThumb";
list.selectable = true;
//create new empty listener object
listListener = {};
nc = new NetConnection(); //create a connection
nc.connect("rtmp://media.us.elsevierhealth.com/videosource");
//connect to FCS (nav.attributes.url)
ns = new NetStream(nc); //create a stream
ns.connect(); //connect the stream
nc.connect("rtmp://media.us.elsevierhealth.com/videosource");
var stream_ns:NetStream = new NetStream(nc);
stream_ns.play("video2.flv");
// Create function to trace all the status info.
function traceStatus(info) {
Message.text+="Level: " + info.level + " Code: " +
info.code+"\n";
} // Assign this function to onStatus handlers when you
create objects.
//Function to handle what happens when an item in the list is
selected
listListener.change = function( evtobj ) {
var nav = list.dataProvider[list.selectedIndex];
var reset = true;
for ( var i = 0; i < nav.childNodes.length; i++ ) {
var stream = nav.childNodes
if ( stream.nodeName == "stream" ) {
attachMovie("FLVPlayback", "my_FLVPlybk", 10, {width:320,
height:240, x:90, y:100});
//center the FLVPlayback component when FLV is ready to play
var listenerObject
bject = new Object();
listenerObject.resize = function(eventObject
bject):Void {
//center video in playback area
newx = (460 - my_FLVPlybk.preferredWidth)/2;
newy = (470 - my_FLVPlybk.preferredHeight)/2;
my_FLVPlybk._x = newx;
my_FLVPlybk._y = newy;
my_FLVPlybk.addEventListener("resize", listenerObject);
listenerObject.ready = function(eventObject
bject):Void {
my_FLVPlybk.setSize(250, 350);
my_FLVPlybk.skin = "ClearExternalAll.swf";
my_FLVPlybk.clear();
my_FLVPlybk.contentPath =
"rtmp://media.us.elsevierhealth.com/videosource/stream/_definst_/"
+ stream.attributes.name+".flv";
my_FLVPlybk.autoSize = true;
trace(my_FLVPlybk.contentPath);
reset = false;
//Add an event listener on the list, when it triggers, run
the listListener function to repopulate the list
list.addEventListener("change", listListener);
//Function that loads the XML file, parses it, and builds the
list of available video clips
var xmllist = new XML(); //setup a variable to hold the XML
xmllist.ignoreWhite = true;
xmllist.load( "playlist-demo-1.xml" ); //load the XML file
//The following gets called when the XML has been loaded
xmllist.onLoad = function( status ) {
if ( !status )
trace( status );
var entries = this.childNodes[0];
var playlists = {};
var nav = [];
for ( var i = 0; i < entries.childNodes.length; i++ ) {
var entry = entries.childNodes;
if ( entry.nodeName == "listitem" )
//builds array of video clip names
playlists[entry.attributes.name] = entry;
else if ( entry.nodeName == "menu" ) {
//builds array of available videos
for ( var j = 0; j < entry.childNodes.length; j++ )
nav[j] = playlists[entry.childNodes[j].attributes.name];
} //end else if
} //end if
//sends the array of videos to the listbox UI
list.dataProvider = nav;
} //end xmllist.onload
Any advice or troubleshooting will be appreciated. Thanks in
advance.

I just used the server on Windows (as opposed to linux) and
it worked great. So the issue, at least for me and my issue (could
see the thumbnails, couldn't play the video) was windows vs. Linux.
I guess the linux version doesn't work with this exact script. Now
to put together something of my own to test to see if the linux
version works right.

Dynamic datatable in custom component

hi all,
i'm working on a custom jsf component and this component will create a datatable dynamically. (you can see component details from http://www.jroller.com/page/hasant?entry=creating_dynamic_datatable_inside_of AND http://www.jroller.com/page/hasant?entry=jsf_question_for_community_what)
the question is; when i want to add a selection column(dynamically), how can i handle its selected values?
i mean, if i have created this datatable in a page with designer, i would bind an Integer[] to that selection column's checkboxes. But i have to add this selection column dynamically from my component. So, how can i GET and SET the selection columns values. Since this is a custom component, there is no backing bean for value binding to this component.
when i resolve the request param string to get the selected rows, it's working(=i can see the selected rows somehow..) but, i can not set that values again while encoding that column after a submit.
here is my row selection column encoding code;
     private void addSelectionColumnToTable(FacesContext context, UIData table) {
          UIColumn column = new UIColumn();
          HtmlInputRowSelect rowSelect = new HtmlInputRowSelect();
          rowSelect.setId("rowSelect1");
          rowSelect.setStyleClass("inputRowSelect");
          rowSelect.setValue(m_selectedRows);
          column.getChildren().add(rowSelect);
          table.getChildren().add(column);
     }In the code above, rowSelect.setValue(m_selectedRows); part not effecting anyhing. m_selectedRows variable includes row numbers(in an Integer array) that i want to see as selected.
any solution/recommendation?

Well if you are still interested in using a text component
instead of a Button the way you would go about this is using
textWidth. Here's how I've done it before using a text / label
whatever you want that shows text.
// => Set our text we got from database
myText.text = "This is the text I got from the DB";
// => Validate it so that way we make sure we get right
numbers
myText.validateNow();
// => Find out how wide our text really is.
var textWidth:Number = myText.textWidth
// => Reset the width of our text component and add 20 for
a little buffer
myText.width = textWidth + 20;
Now my suggestion is if your going to be dynamically creating
these on the fly from a database call you throw it into a method /
class and have that do all the work for you so all you have to do
is pass the text to it and it resizes itself based on the example
above.

Dynamic visibility for tabset

Hi
is there an option or parameter for dynamic visibility for each tab inside tabset component ?
that way i can control what each a specific user can see

so far there isnt any option doing this!

Getting dynamic id of a component bound to a datatable, using javascript

Hi....
I am using Sun Studio Creator to develop a small application.
I have a problem in getting the dynamic id of a component in Javascript, which is bound to a column of a datatable.
In the jsp page, I have a datatable and it is bound to a list in the backing bean.The datatable has 2 columns.One column is a checkbox and the other column is a dropdownlist. The values of the checkbox and the dropdown are taken from the list for a button click.The list data are taken from database.Now, I want to enable/disable the dropdownlist according to the check box value(the user checks/unchecks) and I want to do it on the change/onclick of the checkbox.That is, I want to get the dynamic id of the check box in a Javascript. I tried using the j4j idProxy as well. But that also failed to help me.
In Javascript,
function changeCheckboxValue() {
var i = document.getElementById('checkboxStatus').title;
alert(i);
This alert message is "undefined".
In jsp,
<h:column binding="#{AssignVals.column1}" id="column1">
<h:selectBooleanCheckbox binding="#{AssignVals.checkbox1}" id="checkbox1"
onchange="changeCheckboxValue()" value="#{currentRow['status']}">
<j4j:idProxy id="checkboxStatus" />
</h:selectBooleanCheckbox>
</h:column>
How can I get the dynamic id of the check box in the javascript?
I don't want to do this in the backing bean, as it causes more server trips.
Thanks & regards,
Menaka.

What about using this in your js script?
onchange="changeCheckboxValue(this)"
Names generated by JSF implementation have the format:
<form>:<component>
For data table is like:
<form>:<datatable>:<row #>:<component>
For example:
form1:dataTable1:1:outputText1
You could parse the name of "this" and found what row and form the other component name, for example:
name = "form1:dataTable1:" + row + outputText1;
this.form[name].text = "hello";
Regards.

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

ASA 5505 -Can I use outside dynamic IP for webserver DMZ?

SETUP
ASA 5505
ASA Version 9.1(2)
ASDM Version 7.1(3)
I have basic license, using only three vlans (outside, inside, DMZ).
QUESTION:
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ? I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
So far, every setup option I have tried does not make it past the implicit deny acl's (on the outside interface) to the web-server (DMZ).
I understand that the VLAN1 (inside) had to be disabled. I understand that objects now replace some of the older NAT'd components.
CONFIG:
object network webserver-external-ip
host <X.X.X.X>
! I had set this to match my ISP DHCP address
object network webserver
host 172.16.0.2
nat (DMZ,outside) static webserver-external-ip service tcp www www
nat (DMZ,outside) static webserver-external-ip service tcp 443 443
nat (DMZ,outside) static webserver-external-ip service tcp 4125 4125
access-list outside_acl extended permit tcp any object webserver eq www
access-list outside_acl_https extended permit tcp any object webserver eq 443
access-list outside_acl_rww extended permit tcp any object webserver eq 4125
access-group outside_acl in interface outside
access-group outside_acl_https in interface outside
access-group outside_acl_rww in interface outside
! added the dns statements below because the cisco doc (below) says it's required or dmz traffic can't get out despite default rule allowing it to do so.
! (ctrl-F) ... "all traffic would be blocked from the dmz to hosts on the internet"
! http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bf150c.shtml
object network dns-server
host 8.8.8.8
exit
access-list dmz_acl extended permit udp any object dns-server eq domain
access-list dmz_acl extended permit ip any any
access-group dmz_acl in interface DMZ
SUMMARY:
I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ?
Other:
As an interim alternative, I have been able to setup & connect to the ASA using clientless vpn (web-ssl), and from there getting over to my WHS2011 server...-but the problem is, I have no way of knowing, or updating my DDNS once that IP changes since the ASA keeps blocking the return traffic to theh outside interface. My only assumption is that becasue I am using a single dynamic IP (outside interface) that it has nothing to re-direct the traffic to....???
Thank You for any help you can provide!!
k/r

Hi,
I cant really help with the DDNS portion but I would imagine you already have that sorted out.
The ASA configurations however seem a bit off to me.
Here is what you should configure
STATIC PAT TO HOST SERVICES
There are some changes that need to be done to both ACL and NAT configurations. First of the NAT configurations for each port require their own "object network" to be configured.
Also since you are using a DHCP address from the ISP to act as the NAT address then you can use the keyword/parameter "interface" in the actual "nat" command. This basically tells the ASA that it should use whatever IP address is currently on the "outside" interface of the ASA. So you wont have to configure any separate "object network" for the public IP address every time it changes.
Also, with regards to the ACL configurations. You should only configure one ACL per interface in the "in" direction. So all the rules you need to configure for traffic inbound from the Internet need to be in the same ACL that you then attach to the "outside" interface with the command "access-group"
object network WEBSERVER-TCP80
host 172.16.0.2
nat (DMZ,outside) static interface service tcp www www
object network WEBSERVER-TCP443
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 443 443
object network WEBSERVER-TCP4125
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 4125 4125
access-list outside_acl extended permit tcp any object WEBSERVER-TCP80 eq www
access-list outside_acl extended permit tcp any object WEBSERVER-TCP443 eq https
access-list outside_acl extended permit tcp any object WEBSERVER-TCP4125 eq 4125
access-group outside_acl in interface outside
DYNAMIC PAT FOR LANs and DMZs
The above NAT configurations only handles the NAT for situations where the remote hosts on the Internet contact your DMZ server.
If you want to configure Dynamic PAT for all your LAN and DMZ users which basically enable them to use the "outside" interface public IP address for Internet traffic, then you could configure this single "nat" configuration
nat (any,outside) after-auto source dynamic any interface
This would enable Dynamic PAT for all users behind the ASA
I am not sure if you will run into problems since you are using a single public IP address and trying to forward TCP/443. This port is both used for SSL VPN and ASDM management of the ASA.
If you want to change the default port of the ASDM management you can use this command
http server enable
If you want to change the default port of SSL VPN you can use these commands
webvpn
port
Naturally before doing either of the above changes, make sure that you are not relying to them for management purposes if something was to go wrong. If you have SSH management access to the ASA then it should naturally be ok.
I am not sure if all of the above are enough to get your setup working but it should be the basics. Naturally if there is still problems after the above suggestions it might be helpfull to see the current ASA configurations. For example NAT might not work if the ordering of NAT rules is wrong even though the actual configurations are otherwise valid.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

'schema is missing for the component ' while creating a web service

Hello,
I am trying to create a web service in Application Explorer on my dev server as described in:
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28996/config.htm#BABBJHHF
I use an adapter for JDE Edwards EnterpriseOne. After supplying the parameters (service, license, method name) I get: com.ibi.bse.AddWSWorker:java.lang.Exception: schema is missing for the component.
I think the environment (JDE system, GenJava files) is configured correctly as I am able to communicate using J2CA.
Debug mode produces ibse_log.txt with some errors (below) but this does not give me a clue to the solution. Could you point me in the right direction?
20070507-16:54:04 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:adapter factory method: [GETCOMPONENT]
20070507-16:54:04 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:iwae method: [GETCOMPONENT] with idx [4]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.edaqm.XDClassLoader:com/jdedwards/application/interop/jdejava_cfin/D0100033.class found as url jar:file:///C:\oracle\product\10.1.2\as_1\adapters\application\lib\JDEJAVA_CFINInterop.jar!/com/jdedwards/application/interop/jdejava_cfin/D0100033.class
20070507-16:54:05 ERROR com.iwaysoftware.ibse.iwse.SimpleConfig:Error, properties generation
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:output:<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<GETCOMPONENTResponse xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af">
<sid>2FDCA46F4D0D87AEBB2EF26FDF3949B4</sid>
</GETCOMPONENTResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
20070507-16:54:05 INFO com.iwaysoftware.ibse.iwse.IBSEServlet:Received connection from host [10.1.1.27] with ip [10.1.1.27] and user [null]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:Enter: doPost()...
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:request pathInfo [XDSOAPAdapterFactory]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:request query [null]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:soap action is []
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header>
<ibsinfo xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af">
<service>iwae</service>
<method>GETSCHEMA</method>
<license>admin</license>
<disposition/>
<Username>ibseadmin</Username>
<Password>1234512340023212232</Password>
</ibsinfo>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<GETSCHEMA xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af">
<sid>2FDCA46F4D0D87AEBB2EF26FDF3949B4</sid>
<component location="services/JDEJAVA_CFIN/B0100033/GetEffectiveAddress" name="GetEffectiveAddress"/>
</GETSCHEMA>
</SOAP-ENV:Body>
<SOAPAction agentName="XDSOAPAdapterFactory" cid="1D90AB1A134EFDA81C656CA404EEC38D"></SOAPAction>
</SOAP-ENV:Envelope>
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:adapter factory method: [GETSCHEMA]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:iwae method: [GETSCHEMA] with idx [17]
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.edaqm.XDClassLoader:com/jdedwards/application/interop/jdejava_cfin/D0100033.class found as url jar:file:///C:\oracle\product\10.1.2\as_1\adapters\application\lib\JDEJAVA_CFINInterop.jar!/com/jdedwards/application/interop/jdejava_cfin/D0100033.class
20070507-16:54:05 ERROR com.iwaysoftware.ibse.iwse.SimpleConfig:Error, schema generation
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.edaqm.XDClassLoader:com/jdedwards/application/interop/jdejava_cfin/D0100033.class found as url jar:file:///C:\oracle\product\10.1.2\as_1\adapters\application\lib\JDEJAVA_CFINInterop.jar!/com/jdedwards/application/interop/jdejava_cfin/D0100033.class
20070507-16:54:05 ERROR com.iwaysoftware.ibse.iwse.SimpleConfig:Error, schema generation
20070507-16:54:05 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:output:<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<GETSCHEMAResponse xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af"/>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
20070507-16:54:19 INFO com.iwaysoftware.ibse.iwse.IBSEServlet:Received connection from host [10.1.1.27] with ip [10.1.1.27] and user [null]
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:Enter: doPost()...
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:request pathInfo [XDSOAPAdapterFactory]
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:request query [null]
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.IBSEServlet:soap action is []
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header>
<ibsinfo xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af">
<service>iwae</service>
<method>ADDWS</method>
<license>admin</license>
<disposition/>
<Username>ibseadmin</Username>
<Password>1234512340023212232</Password>
</ibsinfo>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<ADDWS xmlns="urn:schemas-iwaysoftware-com:dec2002:iwse:af">
<sid>2FDCA46F4D0D87AEBB2EF26FDF3949B4</sid>
<component location="services/JDEJAVA_CFIN/B0100033/GetEffectiveAddress" name="GetEffectiveAddress"/>
<svcname>test6</svcname>
<svcdesc>test6</svcdesc>
<licname>test</licname>
<mthname>GetEffectiveAddress</mthname>
<mthdesc>test6</mthdesc>
</ADDWS>
</SOAP-ENV:Body>
<SOAPAction agentName="XDSOAPAdapterFactory" cid="FC73705AC1A76B30A602E68CCD627EC2"></SOAPAction>
</SOAP-ENV:Envelope>
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:adapter factory method: [ADDWS]
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:iwae method: [ADDWS] with idx [9]
20070507-16:54:19 DEBUG com.iwaysoftware.ibse.edaqm.XDClassLoader:com/jdedwards/application/interop/jdejava_cfin/D0100033.class found as url jar:file:///C:\oracle\product\10.1.2\as_1\adapters\application\lib\JDEJAVA_CFINInterop.jar!/com/jdedwards/application/interop/jdejava_cfin/D0100033.class
20070507-16:54:19 ERROR com.iwaysoftware.ibse.iwse.SimpleConfig:Error, schema generation
20070507-16:54:19 ERROR com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory:XD[FAIL] cause: 0 subcause: 0 message: schema is missing for the component
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.buildSchemaInfo(XDSOAPAdapterFactory.java:1556)
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.addMethod(XDSOAPAdapterFactory.java:1628)
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.addService(XDSOAPAdapterFactory.java:1492)
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.handleADDWS(XDSOAPAdapterFactory.java:1376)
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.processWithDB(XDSOAPAdapterFactory.java:1858)
     at com.iwaysoftware.ibse.iwse.XDSOAPAdapterFactory.process(XDSOAPAdapterFactory.java:186)
     at com.iwaysoftware.ibse.iwse.IBSEServlet.doPost(IBSEServlet.java:550)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
pawel

There is a note 1818432 for this issue.

BADI for ME22n - Component Object List

Hi ,
I am working with transaction ME22n. When the item category is L. The material data tab shows a button called Components (Object List). On clicking this button i am taken to another screen which has childeren material items and the related data. I need to capture the values on this screen and compare them with the database values to identify any changes.
I am working with BADI ME_PROCESS_PO_CUST , method CHECK and OPEN. Please tell me in which method parameter those screen values are stored and i can fetch them.
Also please suggest me any other approach possible which i can use to capture the screen field values in the component screen.
Any help would be deeply appreciated.
Thanks in advance.
Moderator message : Duplicate post locked. Continue with thread [BADI for ME22n - Component Object List|BADI for ME22n - Component Object List]
Edited by: Vinod Kumar on Aug 9, 2011 12:25 PM

Hi,
Please check this thread
User exit for component data in ME21n/ME22n
Thanks

How to extend dynamic selection for Logical Database PNPCE

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Dynamic Configuration for determining filename

Hi ,
I am using dynamic configuration for determining the filename sent by the sender
I am using the following code::
int i = 0;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
if (ourSourceFileName.equals("data.txt"))
for (i = 0 ; i < 1 ; i++)
result.addValue(ourSourceFileName);
i have also 'checked' filename in set Adapter specific message propertiesas in sender communication channel.
But Still it is not working.
Please provide some help on it.
Thanks & Regards
Nilima

Hi,
Michal
In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
and it displays::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName"><b>try1.txt</b></SAP:Record>
</SAP:DynamicConfiguration>
please sir provide some help on it.
Thanks once again.

Dynamic 3Dmove for a component or bordercontainer

Similar Messages

Maybe you are looking for