Dynamic action to update IT41

Hello people,
I want to update IT 41 after executing personnel action.
I have written the dynamic action however it is not updating. can u advise?
0000    04 991             P    T001P-MOLGA='99'
0000    04 992             P     P0000-MASSN='Z4'
0000    04 993             I      INS,0041,,,(P0000-BEGDA),(P0000-ENDDA)/D
0000    04 994            W     P0041-DAR01='01'
0000    04 995            W     P0041-DAT01=P0000-BEGDA

I did checked ur Dynamic Action but it looks Ok but still i made some changes kindly try this and update me
0000 06 990 * Update Infotype 0041*
0000 06 991 P T001P-MOLGA='99'
0000 06 992 P P0000-MASSN='Z4'
0000 06 993 I INS,0041,,,(P0000-BEGDA),(P0000-ENDDA)/D
0000 06 994 W P0041-DAR01='01'
0000 06 995 W P0041-DAT01=P0000-BEGDA
I assume that from the above Z4 is Hiring action and 01 is Date Type.
Best Regards,

Similar Messages

Triggering Dynamic actions when updating an Infotype using a FM

Hi all,
This is the scenario.
I am trying to run a Transfer action, (80), which updates the Infotype 0000 and Infotype 0001. When the entry in the Infotype 0001 is saved, a dynamic action is triggered and a custom infotype is updated automatically. I need to find a FM that takes care of any dynamic actins associated to an Infotype.
I tried using a BDC, but I was not successful. While using the FM HR_INFOTYPE_OPERATION, I am able to update the data into the infotyes 0000 and 0001 but the dnamic action is not triggered. Can someone please suggest a solution.
Thanks,
Amar

Hi,
   Thanks for you r reply. Well I am new to dynamic actions, but this is the Dynamic action that has been written.
GET_DU(ZHRDUDYNCALL)
COP,9009,,,(P0001-BEGDA),(P0001-ENDDA)/D
----P9009-SEQNR=P0001-SEQNR ---***
P9009-AEDTM=P0001-AEDTM
P9009-UNAME=P0001-UNAME
P9009-DU_CD=RP50D-FIELD1
--END OF ENTRY IN TABLE PA9009--
--CREATE ENTRY IN TABLE PA9009----
SY-DATUM=SY-DATUM
GET_DU(ZHRDUDYNCALL)
DEL,9009,,,(P0001-BEGDA),(P0001-ENDDA)/D
P9009-DU_CD=RP50D-FIELD1
--END OF ENTRY IN TABLE PA9009--
The FM that I am using goes like this:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '0001'
    number                 = lv_pernr
SUBTYPE                =   wa_0000-MASSN
OBJECTID               =
LOCKINDICATOR          =
   VALIDITYEND            = lc_endda
   VALIDITYBEGIN          = wa_source_data-begda
RECORDNUMBER           = 1
    record                 = wa_0001
    operation              = 'COP'
   TCLAS                  = 'A'
   DIALOG_MODE            = '0'
NOCOMMIT               =
VIEW_IDENTIFIER        =
   SECONDARY_RECORD       = proposed_values0001
IMPORTING
RETURN                 = return
KEY                    =
Please let me know if there is anything more I need to do?
Thanks,
Amar

Using Dynamic actions while updating a Transfer action

Hi all,
    I am trying to run a Transfer action, (80), which updates the Infotype 0000 and Infotype 0001. When the entry in the Infotype 0001 is saved, a dynamic action is triggered and a custom infotype is updated automatically. I need to find a FM that takes care of any dynamic actins associated to an Infotype.
   I tried using a BDC, but it was not successful. While using the FM HR_INFOTYPE_OPERATION, I somehow am not able to store the data into the Infotypes, leave alone the dynamic action. Can someone please suggest a solution.
Thanks,
Amar

Hi VK,
    The dynamic action is:
     06     993     F     GET_DU(ZHRDUDYNCALL)
     06     994     I     COP,9009,,,(P0001-BEGDA),(P0001-ENDDA)/D
     06     995     C     ----P9009-SEQNR=P0001-SEQNR ---***
     06     996     W     P9009-AEDTM=P0001-AEDTM
     06     997     W     P9009-UNAME=P0001-UNAME
     06     998     W     P9009-DU_CD=RP50D-FIELD1
     06     999     C     --END OF ENTRY IN TABLE PA9009--
     08     891     C     --CREATE ENTRY IN TABLE PA9009----
     08     892     P     SY-DATUM=SY-DATUM
     08     893     C     GET_DU(ZHRDUDYNCALL)
     08     894     I     DEL,9009,,,(P0001-BEGDA),(P0001-ENDDA)/D
     08     895     C     P9009-DU_CD=RP50D-FIELD1
     08     896     C     --END OF ENTRY IN TABLE PA9009--
Thanks,
Amar
Edited by: Amarpreet Singh Reen on May 4, 2009 3:54 PM

Help using a dynamic action to update tabular form items (specifically radio button) based on collection

Hi Everyone, I have posted this question in the past and made huge progress with Denes Kubicek's help: https://apex.oracle.com/pls/apex/f?p=31517:294:115851992029365::::: based on my earlier question posted: https://forums.oracle.com/forums/thread.jspa?threadID=2537494
I am struggling with one item in my tabular form. It is a radio button. The choices all appear properly, but the value is not saved in the collection (and hence, not saved in the table). All other items in the tabular form save properly.
here is what I have for the query.   It is item c024 (which maps to ;'f03'), which is defined as a radio LOV based on an existing LOV.
Currently I have:
2 page items:
P110_ID
P110_VALUE
Dynamic action called CHANGE COLUMN:
event: CHANGE
selection type: jQUERY Selector
jQuery:
jQuery Select = input[name='f03'],select[name'f08'],select[name='f09'],input[name='f10'],input[name='f11'],input[name='f12'],select[name='f40'],input[name='f21'],input[name='f22'],input[name='f23'],input[name='f50']
event scope: Dynamic
true action#1: set value P110_ID javascript expression this.triggeringElement.id
true action#2: set value P110_VALUE javascript expression this.triggeringElement.value
true action#3: execute pl/sql code
declare
v_member number;
v_seq number;
begin
v_member := TO_NUMBER (SUBSTR (:p110_id, 2, 2));
select ltrim(substr(:p110_ID,5,4),'0') into v_seq from dual;
safis_collections.update_column(v_seq,
                                v_member,
                                :p110_value);
true ation#4 refresh region :LANDINGS_COLLECTION
the tabular form is based on the query:
SELECT
apex_item.text(1,seq_id,'','','id="f01_'||seq_id,'','') "DeleteRow",
seq_id,
seq_id display_seq_id,
apex_item.text_from_LOV(c004,'SPECIES')||'-'||apex_item.text_from_LOV(c005,'GRADE')||'-'||apex_item.text_from_LOV(c006,'MARKETCODE')||'-'||apex_item.text_from_LOV_query(c007,'select unit_of_measure d, unit_of_measure r from species_qc') unit,
apex_item.select_list_from_LOV(8,c008,'DISPOSITIONS','onchange="getAllDisposition('||seq_id||')"','YES','0',' -- Select Favorite -- ','f08_'||seq_id,'') Disposition,
apex_item.select_list_from_LOV(9,c009,'GEARS','style="background-color:#FBEC5D; "onFocus="checkGearPreviousFocus('||seq_id||');"onchange="getAllGears('||seq_id||')"','YES','3333','-- Select Favorite --','f09_'||seq_id,'') Gear,
apex_item.text(10,TO_NUMBER(c010),5,null, 'onchange="setTotal('||seq_id||')"','f10_'||seq_id,'') Quantity,
apex_item.text(11,TO_NUMBER(c011),5,null,'onchange="getPriceBoundaries('||seq_id||')"','f11_'||seq_id,'') Price,
apex_item.text(12, TO_NUMBER(c012),5,null, 'onchange="changePrice
('||seq_id||')" onKeyDown="selectDollarsFocus('||seq_id||',event);"','f12_'||seq_id,'') Dollars,
decode(c013,'Y',apex_item.text(14, c014,30,null,'style="background-color:#FBEC5D;" onClick="onFocusAreaFished('||seq_id||');"','f14_'||seq_id,''),'N','N/A') Area_Fished,
decode(c017,'Y',apex_item.text(18, c018,4,null,'style="background-color:#FBEC5D; "onBlur="setUnitQuantity('||seq_id||')"','f18_'||seq_id,''),'N','N/A') UNIT_QUANTITY,
decode(c017,'Y',apex_item.text(19,'CN',3,null,'readOnly=readOnly;','f19_'||seq_id,''),'N','N/A') UNIT_COUNT,
c024 hms_flag,
decode(c050,'Y',apex_item.checkbox(21,'Y','id="f21_'||seq_id||'" style="background-color:#FBEC5D; " onClick="alterYes('||seq_id||');" onKeyPress="alterYes('||seq_id||');"',c021),'N','N/A') FinsAttached,
decode(c050,'Y',apex_item.checkbox(22,'N','id="f22_'||seq_id||'" style="background-color:#FBEC5D;" onClick="alterNo('||seq_id||');" onKeyPress="alterNo('||seq_id||');"',c022),'N','N/A') FinsNotAttached,
decode(c050,'Y',apex_item.checkbox(23,'U','id="f23_'||seq_id||'" style="background-color:#FBEC5D;" onClick="alterUnk('||seq_id||');" onKeyPress="alterUnk('||seq_id||');"',c023),'N','N/A') FinsUnknown,
decode(c050,'Y',apex_item.textarea(28,c028,3,null,null,'f28_'||seq_id,''),'N','N/A') Explanation,
decode(c024,'N',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'U',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'Y','N/A') Nature_Of_Sale,
decode(c020,'Y',
apex_item.select_list_from_LOV(40,c040,'HMS_AREA_CODE','style="background-color:#FBEC5D;"',null,null,null,'f40_'||seq_id,''),
'N','N/A') HMS_AREA_CODE,
c020,c050,
decode(c020,'Y',
apex_item.text(41,TO_NUMBER(c041),5,null,null,'f41_'||seq_id,''),
'N','N/A') Sale_Price
from apex_collections
where collection_name = 'SPECIES_COLLECTION' order by seq_id
I have noticed the following:
when I change column C011 (price) the following values are set in the dynamic action:
P110_ID = f11_1
P110_VALUE = whatever I change the price to.
when I change the column C024 (hms_flag), the following values are set:
P110_ID = f03_0001
P110_VALUE = whatever I change hms_flag to.
the region is refreshed in my dynamic action, and the change for hms_flag does not hold. I have tested the SQL query that generates the value for v_SEQ in the dynamic action.   In both a change to price and HMS_FLAG it appears valid
select ltrim(substr(:p110_ID,5,4),'0') into v_seq from dual;
if f11_1, v_seq:= 1
if f03_0001, v_seq := 1
thank you!

solved. sort of.
field c024 references f03.
the Dynamic ACtion, step 4 calculates v_member by taking a substring of P110_ID...and in all other fields, the column and the field (fxx) are the same value....except for c024.
I am not certain exactly how to resolve, but see the problem.

How to add a link to html region to fire a dynamic action?

Hi, guys:
I need to add a hyper link to a html region (I wish it could be a button :( ) , the value of items in this region is loaded by a pl/sql process before loading header. And this link needs to fire a dynamic action to update database. I know how to add a hyper link to this region, but how to set this link so I can fire a dynamic action by clicking this link, could anyone give me a hint?
Thanks a lot in advance.
Sam
Edited by: lxiscas on Apr 11, 2013 5:04 PM

Hi, Jorge:
Thanks for your reply. I cannot use updateRec, I have to use my own PL/SQL procedure. I tried to use similar way as people set dynamic action for modal page.
I set column link for ncic_approve_link
SELECT SOR_ALIAS.ALIAS_ID,
SOR_ALIAS.OFFENDER_ID,
SOR_ALIAS.FIRST_NAME|| ' '|| SOR_ALIAS.MIDDLE_NAME|| ' '|| SOR_ALIAS.LAST_NAME || ' ' || SOR_ALIAS.SIR_NAME   AS " Alias Name ",
NVL(SOR_ALIAS.NICKNAME, 'No Nick names ') AS "Nick Name",
(case when SOR_ALIAS.ncic_verify_date is null then 'NCIC' else null end) ncic_approve_link
FROM SOR_ALIAS
WHERE SOR_ALIAS.OFFENDER_ID    = :p216_detail
AND SOR_ALIAS.ADMIN_VALIDATED IS NOT NULL
AND upper(SOR_ALIAS.STATUS)    = upper('active')the link attributes is
onclick="return false;" class="alias_ncic" title="NCIC Approve"then I pass two values to two hidden variables:
P216_H_NCIC_APPROVE_TABLE_NAME--->'SOR_ALIAS'
P216_H_NCIC_APPROVE_KEY_VALUE--->#ALIAS_ID#
and I declare a dynamic action to execute PL/SQl code as :
event: click
selection type: JQuery seclector
JQuery selector: a.alias_ncic
declare
begin
sor_admin.update_NCIC_verify_date(:P216_H_NCIC_APPROVE_TABLE_NAME, :P216_H_NCIC_APPROVE_KEY_VALUE);
end;However, the PL/SQL was called but raised exception that both the parameters are null. It looks when user click the column link, the value is not passed to hidden items. Could you help me on this?
APEX 4.1
Oracle 11G R2
Thanks.
Sam
Edited by: lxiscas on Apr 29, 2013 10:00 AM
Edited by: lxiscas on Apr 29, 2013 10:01 AM

About creating an AJAX page with DML procedures using dynamic actions

About creating an AJAX page with DML procedures in APEX using dynamic actions. Help with limitations.
I want to share my experience, creating AJAX procedures in APEX 4.0.
LIMITATIONS
•     How Can I Hide UPDATE button while I press NEW button. ??
•     How Can I Hide CREATE button while I’m UPDATING A RECORD. ??
•     How can I avoid multiple Inserts or Updates. ??
Here are the steps to create an AJAX Updatable Form using the sample table DEPTS. You can see the demo here: [http://apex.oracle.com/pls/apex/f?p=15488:1]
1)     Create a blank page
2)     Add a Report Region for departments (It shows the columns deptno, dname and loc).
3)     Add an HTML Region and create the elements to edit a Department.
a.     P1_DEPTNO (Hidden to store PK)
b.     P1_DNAME (Text Field)
c.     P1_LOC (Text Field)
4)     You also have to create a hidden element called P1_ACTION. This will help to trigger dynamic actions to perform DMLs.
5)     Open Page Attributes and in the HTML Header Section include the following code.
<script>
     function doSelect(pId){
          $x_Value(‘P1_DEPTNO’,pId);
          $x_Value(‘P1_ACTION’,’SELECT’);
</script>
6)     Modify the column DEPTNO in the report, to add column link. In the link text you can use #DEPTNO# , in target you must select ‘URL ‘ and in the URL field write javascript:doSelect(#DEPTNO#);
7)     Create the following Buttons in the Form Region.
CANCEL     Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’CANCEL’);
NEW          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’NEW’);
SAVE          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’UPDATE’);
CREATE          Redirects to URL: javascript:$x_Value(‘P150_ACTION’,’CREATE’);
8)     Create the following Dynamic Action to Select a Department
Name:     Select Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     SELECT
Action:     Execute PL/SQL Code
PL/SQL Code:
SELECT dname, loc
INTO :P1_DNAME, :P1_LOC
FROM dept
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
The first limitation, the value of page elements don’t do refresh so I added the following true actions to the dynamic action AFTER Execute PL/SQL Code.
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     (none) (leave it blank)
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     (none) (leave it blank)
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
9)     Create the following Dynamic Action to Update a Department
Name:     Update Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     CREATE
Action:     Execute PL/SQL Code
PL/SQL Code:
UPDATE dept SET
dname = :P1_DNAME,
loc = :P1_LOC
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
Include the following True Actions BEFORE the Execute PL/SQL Code true Action.
Action:     Set Value
Unmark ‘Fire on page load’ and ‘Stop execution on error’
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     P1_DNAME
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     P1_LOC
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
Finally to refresh the Departments report, add the following true action at the end
Action:     Refresh
Affected Elements: Region Departments
10)     Create the following Dynamic Action to Create a Department
Name:     Create Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     CREATE
Action:     Execute PL/SQL Code
PL/SQL Code:
INSERT INTO dept(deptno,dname,loc)
VALUES (:P1_DEPTNO,:P1_DNAME,:P1_LOC);
Page Items to Submit:     P1_DEPTNO, P1_DNAME, P1_LOC
Don’t include any false action and create the Dynamic Action.
Include the following True Actions BEFORE the Execute PL/SQL Code true Action.
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Function Body
PL/SQL Function Body:
DECLARE
v_pk NUMBER;
BEGIN
SELECT DEPT_SEQ.nextval INTO v_pk FROM DUAL;; -- or any other existing sequence
RETURN v_pk;
END;
Page Items to submit:     P1_DEPTNO
Affected Elements: Item P1_DEPTNO
Action:     Set Value
Unmark *‘Fire on page load’* and *‘Stop execution on error’*
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_DNAME
Page Items to submit:     P1_DNAME
Affected Elements: Item P1_DNAME
Action:     Set Value
Unmark ‘Fire on page load’ and ‘Stop execution on error’
Set Type:     PL/SQL Expression
PL/SQL Expression:     :P1_LOC
Page Items to submit:     P1_LOC
Affected Elements: Item P1_LOC
These actions allow refresh the items display value.
Finally to refresh the Departments report, add the following true action at the end
Action:     Refresh
Affected Elements: Region Departments
11)     Create the following Dynamic Action to delete a department
Name:     Delete Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     DELETE
Action:     Execute PL/SQL Code
PL/SQL Code:
DELETE dept
WHERE deptno = :P1_DEPTNO;
Page Items to Submit:     P1_DEPTNO
Don’t include any false action and create the Dynamic Action.
Include the following True Actions AFTER the Execute PL/SQL Code true Action.
Action:     Refresh
Affected Elements: Region Departments
Action:     Clear
Unmark ‘Fire on page load’
Affected Elements: Items P1_DEPTNO, P1_DNAME, P1_LOC
12)     Finally Create the following Dynamic Action for the NEW event
Name:     New Dept
Event:     Change
Selection Type:     Item(s)
Item(s):     P1_ACTION
Condition:     equal to
Value:     NEW
Action:     Clear
Unmark *‘Fire on page load’*
Affected Elements: Items P1_DEPTNO, P1_DNAME, P1_LOC

I need some help to solve this issues
•     How Can I Hide UPDATE button while I press NEW button. ??
•     How Can I Hide CREATE button while I’m UPDATING A RECORD. ??
•     How can I avoid multiple Inserts or Updates. ??

Call a transaction code in dynamic action

Hi
How can we call a transaction code in a dynamic action.
TC XD01 is populated when changes is happen in IT0006 subtype 03.
Regards
WS

Hi,
Please find the below threads which may help you.
Problem in calling dynamic actions in BDC
Create Dynamic Action
Triggering Dynamic actions when updating an Infotype using a FM
Thanks & Regards,
Sandip Biswas.

Dynamic action in infotype0000

hi abapers
I am using HR_MAINTAIN_MASTERDATA Fm to update 0000 infotype. can i use Dynamic action to update data of other infotypes?
thanks
Sachin

hi Kumar Bandanadham
by filling proposed values...then there will not be any dynamic action. the meaning of dynamic action will lost. Is it possible to have dynamic action when i am using Fm HR_MAINTAIN_MASTERDATA?
thanks
Sachin

Quick Picks and Dynamic Actions not working

I have a page item that includes Quick Pick values. This item also includes a dynamic action to update another item when triggered by a change event. The problem is, quick picks do not trigger change events. Has anyone else seen this and come up with a solution? Thanks.

Hi,
the JavaScript code generated for the Quick Picks is using $s which triggers the change event for the target page item.
I just tried that out and it worked fine for me.
1) I have defined a text field with a few quick pick values.
2) Declared a dynamic action which fires on "Change". No condition set
3) The action is defined as "Alert"
The alert always shows when I pick a value with a quick pick.
Can you put an example on apex.oracle.com so that I can have a look.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Issue with Dynamic Actions - Infotype 0041 Updation

Hi All,
Requirement :
I have to update the Date type-13 ( Resignation Date - DAR11 ) without Date ( DAT11 as Blank value - User will fill through Infogroup ) while performing the Termination action through PA40.
Added below code in V_T588z (0000):
I have added 186,188 Lines.Other lines are standard thing.
              04     180     P     PSPAR-MASSN='10'/X **Termination
              04     181     P     PSPAR-MASSN='ZB'/X **Termination
              04     182     P     PSPAR-MASSN='14'/X **Termination
              04     185     I     COP,41,,,(PSPAR-BEGDA),(PSPAR-ENDDA)/D
              04     186     W     P0041-DAR11='13' **BEGIN & END OF CRA01670 CODE ***
              04     188     W     P0041-DAR11='' **BEGIN & END OF CRA01670 CODE ***
Issue :
1. The above logic is not working for Finland ,other countries. For only India it is working.
2. Some times Date type-13 is coming twice while through the Infogroup-0041 screen twice,which is incorrect. The infotype-0041 should call only once.I have checked the User parameters,MOLGA,USR. But it is not working.
2. The standard configuration Date type -09-Last day of work - is working fine . But i could not be able to find ,from where it is coming.I have checked the Dynamic actions,but no use.
Need your inputs to solve the issue.
Thanks,
N.L.Narayana

P     P0000-MASSN='01'    Action type
P                   P0000-MASSG="01"   Action Reaosn
P     T001P-MOLGA='40'
F                   here u will keep the Call Routine
I     INS,2001,,,(P0000-BEGDA),(P0000-ENDDA)/D (here u have pass the date of Call routine )
W     P2001-IAWRT='01'
But here Infotype 2001 we will give Absence type this IT is used for Booking Absence Types i did not get the Wage type 8001
thru which IT are u processing it
for more info Checjk Tabvke V_T588Z here iam pasteing the sample call routine which i got from earlier thread
Create a Program (Subroutine) using SE38. Save and activate it.
ZZSY_DYA_TEST2
REPORT ZZSY_DYA_TEST2.
tables : p0000,p0001,rp50d.
FORM getdate.
rp50d-date1 = p0000-begda + 90.
ENDFORM.
FORM get_date.
rp50d-date2 = p0000-begda + 180.
ENDFORM.

Cannot perform insert/update on tabular form, because of dynamic action

Hello all,
I have created dynamic action which computes value from several tabular form cells.
This functionality works nice, when I change value in associated cell then the computed value is changed by the dynamic action.
But I am not able to insert or update the row in tabular form when the dynamic action is enabled. When I set condition to "Never", then the row is inserted or updated without any problems.
Any guess where is the problem?
Apex version: 4.1.1.00.23
Jiri

Ok, below are details related to my DA. Sorry for the poor description in previous posts.
Triggered by: Chnage event
Selection type: jQuery Selector
jQuery Selector
td[headers='SPECIESCODE'] input,td[headers='MEASURETYPE'] input,td[headers='TRUNKLOGID'] input,td[headers='LOGCLASS'] input,td[headers='LENGTH'] input,td[headers='PIECES'] input,td[headers='DIAMETER'] inputTrue Actions:
*1.*
//get element id which was changed by user
var v_elementid = (jQuery(this.triggeringElement).attr('id'));
switch(v_elementid.substr(0,3))
case "f05":
   //assign value from triggered element to hidden field
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
case "f06":
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
case "f07":
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
}*2.*
//get element id which was changed by user
var v_elementid = (jQuery(this.triggeringElement).attr('id'));
switch(v_elementid.substr(0,3))
case "f09":
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
case "f12":
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
case "f13":
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='DIAMETER'] input").val());
   break;
case "f14":
   $s("P210_HIDDEN_DIAMETER",jQuery(this.triggeringElement).val());
   //assign actual values also to other hidden elements
   $s("P210_HIDDEN_MEASURE",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='MEASURETYPE'] input").val());
   $s("P210_HIDDEN_TRUNKLOGID",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='TRUNKLOGID'] input").val());
   $s("P210_HIDDEN_SPECIES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='SPECIESCODE'] input").val());
   $s("P210_HIDDEN_LENGTH",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LENGTH'] input").val());
   $s("P210_HIDDEN_PIECES",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='PIECES'] input").val());
   $s("P210_HIDDEN_LOGCLASS",jQuery(this.triggeringElement).parents("tr:first").find("td[headers='LOGCLASS'] input").val());
   break;
}*3.*
call PL/SQL function (values from hidden fields are used as input params)
begin
:P210_HIDDEN_VOLUME := function(:P210_HIDDEN_SPECIES,:P210_HIDDEN_MEASURE,:P210_HIDDEN_TRUNKLOGID,:P210_HIDDEN_LOGCLASS,:P210_HIDDEN_LENGTH,:P210_HIDDEN_DIAMETER,:P210_HIDDEN_PIECES, :G_USERLANG);
end;*4.*
here I want to set computed value from hidden field to VOLUME cell in tabular form. And it seems there is some problem, because not only the corresponding VOLUME cell is changed, but also several other cells. I realized that also several cells which are hidden to user has same value as computed VOLUME field. Including ROWID and then the insert/update operations are not done.
// find the VOLUME-Field and set it to the computed value
jQuery(this.triggeringElement).parents("tr:first").find("td[headers='VOLUME'] input").val($v("P210_HIDDEN_VOLUME"));I hope I have provide more information and somebody will be able to he help me. maybe the problem is clear, but with my poor jQuery knowledge i am not able to find it.
Thanks in advance!
-Jiri
Edited by: Jiri N. on Aug 10, 2012 3:24 AM

Re: Dynamic Action is not triggering in LSMW Recording

Hello All,
In SAP HRMS personnel actions if i do using LSMW Recording it is not triggering the dynamic actions.
Is there any mechanism to Trigger dynamic action in LSMW Recording ?
How to find the differences in process with and with out recording ?
Small help is also highly appreciated.
With Regards,
Sunil,
+91-9903695384.

Yes. Do one thing. First study the dynamic action. Try to understand what the dynamic action is doing. Is it creating data in other infotype or is it updating some other table. Once it is clear what the dynamic action is doing then you can try to implement the same logic in LSMW. In LSMW there is a provision to add more than one recording and this recording can be called based on some logic..
Thanks & Regards,
Sandip

Dynamic Action with field DIVGV not working

We have built the dynamic action below to default values from infotypes 0007 and 0008 behind the screnes in infotype 0491 Payroll Outsourcing. The issue that we are having is that the dynamic action will not work for field P0008-DIVGV, but will work with all the other fields.
The only difference between the DIVGV field and the rest of the other fields mentioned in this dynamic ation is that it seems to be a free text field (which you can modify), even though the values are pulled from the work schedule rule in infotype 0007. We have also hidden the DIVGV field in 0007 per client requirement.
Does anyone have any suggestions on how to get this working. Do we need to populate these values in any of thh HR tables first?
06     10     *     *** COP 0491 US PAYROLL OUTSOURCING ***
06     12     P     T001P-MOLGA='10'
06     14     I     COP,0491,,,(P0008-BEGDA),(P0008-ENDDA)/D
06     16     W     P0491-OTF06='PS TYPE'
06     18     W     P0491-OTV06=P0008-TRFAR
06     20     W     P0491-OTF07='PS AREA'
06     22     W     P0491-OTV07=P0008-TRFGB
06     24     W     P0491-OTF08='WORK SCHEDULE RULE'
06     26     W     P0491-OTV08=P0007-SCHKZ
06     27     W     P0491-OTV09='WORK HOURS/PERIOD'
06     28     W     P0491-OTV09=P0008-DIVGV

Hi Damas,
it seems to be no specific reason for not updation P0008-DIVGV only.Please cross check whether field is populating or not in Infotype 0008, before dynamic action triggered, other that that there is no reason.

Performance issues with dynamic action (PL/SQL)

Hi!
I'm having perfomance issues with a dynamic action that is triggered on a button click.
I have 5 drop down lists to select columns which the users want to filter, 5 drop down lists to select an operation and 5 boxes to input values.
After that, there is a filter button that just submits the page based on the selected filters.
This part works fine, the data is filtered almost instantaneously.
After this, I have 3 column selectors and 3 boxes where users put values they wish to update the filtered rows to,
There is an update button that calls the dynamic action (procedure that is written below).
It should be straight out, the only performance issue could be the decode section, because I need to cover cases when user wants to set a value to null (@) and when he doesn't want update 3 columns, but less (he leaves '').
Hence P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||')
However when I finally click the update button, my browser freezes and nothing happens on the table.
Can anyone help me solve this and improve the speed of the update?
Regards,
Ivan
P.S. The code for the procedure is below:
create or replace
PROCEDURE DWP.PROC_UPD
(P99_X_UC1 in VARCHAR2,
P99_X_UV1 in VARCHAR2,
P99_X_UC2 in VARCHAR2,
P99_X_UV2 in VARCHAR2,
P99_X_UC3 in VARCHAR2,
P99_X_UV3 in VARCHAR2,
P99_X_COL in VARCHAR2,
P99_X_O in VARCHAR2,
P99_X_V in VARCHAR2,
P99_X_COL2 in VARCHAR2,
P99_X_O2 in VARCHAR2,
P99_X_V2 in VARCHAR2,
P99_X_COL3 in VARCHAR2,
P99_X_O3 in VARCHAR2,
P99_X_V3 in VARCHAR2,
P99_X_COL4 in VARCHAR2,
P99_X_O4 in VARCHAR2,
P99_X_V4 in VARCHAR2,
P99_X_COL5 in VARCHAR2,
P99_X_O5 in VARCHAR2,
P99_X_V5 in VARCHAR2,
P99_X_CD in VARCHAR2,
P99_X_VD in VARCHAR2
) IS
l_sql_stmt varchar2(32600);
p_table_name varchar2(30) := 'DWP.IZV_SLOG_DET';
BEGIN
l_sql_stmt := 'update ' || p_table_name || ' set '
|| P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||'),'
|| P99_X_UC2 || ' = decode(' || P99_X_UV2 ||','''','|| P99_X_UC2 ||',''@'',null,'|| P99_X_UV2 ||'),'
|| P99_X_UC3 || ' = decode(' || P99_X_UV3 ||','''','|| P99_X_UC3 ||',''@'',null,'|| P99_X_UV3 ||') where '||
P99_X_COL ||' '|| P99_X_O ||' ' || P99_X_V || ' and ' ||
P99_X_COL2 ||' '|| P99_X_O2 ||' ' || P99_X_V2 || ' and ' ||
P99_X_COL3 ||' '|| P99_X_O3 ||' ' || P99_X_V3 || ' and ' ||
P99_X_COL4 ||' '|| P99_X_O4 ||' ' || P99_X_V4 || ' and ' ||
P99_X_COL5 ||' '|| P99_X_O5 ||' ' || P99_X_V5 || ' and ' ||
P99_X_CD || ' = ' || P99_X_VD ;
--dbms_output.put_line(l_sql_stmt);
EXECUTE IMMEDIATE l_sql_stmt;
END;

Hi Ivan,
I do not think that the decode is performance relevant. Maybe the update hangs because some other transaction has uncommitted changes to one of the affected rows or the where clause is not selective enough and needs to update a huge amount of records.
Besides that - and I might be wrong, because I only know some part of your app - the code here looks like you have a huge sql injection vulnerability here. Maybe you should consider re-writing your logic in static sql. If that is not possible, you should make sure that the user input only contains allowed values, e.g. by white-listing P99_X_On (i.e. make sure they only contain known values like '=', '<', ...), and by using dbms_assert.enquote_name/enquote_literal on the other P99_X_nnn parameters.
Regards,
Christian

Dynamic Action based on Interactive Report Select List Value

I'd like to perform a Dynamic Action when a user selects one of 3 options from a Select List within an Interactive Report:
select APEX_ITEM.SELECT_LIST(
p_idx => 3,
--p_value         =>   deptno,
p_list_values => 'Copy;Copy,Delete;Delete,Export to PDF;Export to PDF',
--p_attributes    =>   'style="color:red;"',
p_show_null => 'YES',
p_null_value => NULL,
p_null_text => '--Select--',
--p_item_id       =>   'f03_#ROWNUM#',
p_item_id => 'P6_IR_SELECT_LIST',
p_item_label => 'Label for f03_#ROWNUM#',
p_show_extra => 'YES') "Actions"
from dual;
When building the Dynamic Action, I chose the following values from the Advanced wizard
Event: Select
Selection Type: DOM Object
DOM Object: P6_IR_SELECT_LIST
Condition: Equal to
Value: "Delete"
True Action: Execute Javascript Code: Alert('Here');
Doesn't seem to be firing...can anyone help?
Thanks in advance,
John

Hi,
I am not sure if the "equal to" condition applies to a DOM object... after all, a DOM object can be anything (any HTML element) not only a field.
Try using a javascript expression instead, like this:
$v('P6_IR_SELECT_LIST')=='Delete'UPDATE: Sorry, I just tested and "equal to" condition works for DOM objects... should have tested before posting!
Luis
Edited by: Luis Cabral on Feb 29, 2012 4:45 PM

Dynamic action to update IT41

Similar Messages

Maybe you are looking for