Dynamic ALV Display
Hi all,
I have a program where i need to display split screen ALV.
One ALV table on the left and one the right.
In the left ALV i display 10 table names..
If i click on the table name then the table should be displayed in the right side ALV.
This i can successfully do it but if i click on the another table after displaying the one table the new table will not be displayed where as still the first displayed tabled is shown..
Below is my coding please have a look and let me know the error..
IF gr_custom_container_02 IS INITIAL.
CREATE OBJECT gr_custom_container_02
EXPORTING
container_name = 'CUSTOM'.
Split the Container---------------------------------------------------*
CREATE OBJECT splitter
EXPORTING
parent = gr_custom_container_02
rows = 1
columns = 2.
CALL METHOD splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = container_1.
create the ALV Table-------------------------------------------------*
CREATE OBJECT gr_alv_grid_02
EXPORTING
i_parent = container_1.
create Fieldcatalog--------------------------------------------------*
PERFORM prepare_fieldcat_02 CHANGING g_t_fieldcat_02.
To Customize the layout
PERFORM prepare_layout_02 CHANGING g_s_layout_02.
Show ALV-------------------------------------------------------------*
CALL METHOD gr_alv_grid_02->set_table_for_first_display
EXPORTING
is_layout = g_s_layout_02
CHANGING
it_fieldcatalog = g_t_fieldcat_02
it_outtab = g_t_queuename.
SET HANDLER event_receiver->handle_hotspot_click FOR gr_alv_grid_02.
ELSE.
To refresh the table for displaying.
CALL METHOD cl_gui_cfw=>flush.
CALL METHOD gr_alv_grid_02->refresh_table_display
EXCEPTIONS
finished = 1
OTHERS = 2.
ENDIF.
CALL METHOD splitter->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = container_2.
create the ALV Table-------------------------------------------------*
CREATE OBJECT gr_alv_grid_03
EXPORTING
i_parent = container_2.
Show ALV-------------------------------------------------------------*
CALL METHOD gr_alv_grid_03->set_table_for_first_display
EXPORTING
CHANGING
it_fieldcatalog = g_t_fieldcat_03
it_outtab = <select_queue_table>.
Hi,
You should develop an event handler method where you will catch the click on the left container. There you should evaluate the the data and you should free the ALV grid from the right container and then you should call the method set_table_for_first_display with the data that you want. At the end you should call the static method CL_GUI_CFW=>FLUSH to synchronize the ALV framework.
With Regards
George
Similar Messages
-
User Command in Dynamic ALV Display
Hi,
I have an requirement where i'm displaying Dynamic ALV grid by calling the method by passing the field Symbol in it_outtab parameter:
CALL METHOD cl_gui_alv_grid->set_table_for_first_display
For this i'm creating a custom container in my screen container
CREATE OBJECT cl_gui_custom_container
EXPORTING container_name = lv_container.
Now in the output every record is having a checkbox in the end.Now if the user check this checkbox n clicks on push button(added in Application toolbar) then this record should be kept and rest all the records should be deleted.
This can be done if an internal table is passed to the method as the field symbol doesnt hold any data after the output is displayed.
Is there any solution where this can be made possible.
Thanks in advance.
Sheetaltry this ..
before displaying ALV , store all the data in the fieldsymbol into another internal table
then display ALV with field symbol
after u click the pushbutton , get the seleted rows into another table using get_selected rows,
now again call CALL METHOD cl_gui_alv_grid->set_table_for_first_display
and give the new selected rows of internal table and refresh the grid -
Rows as columns and dynamic alv display
Hi everyone,
I need to build a intenal table dynamically as well as dispaly few rows as columns in alv output.
I have seen posts where internal table has been created dynamicaaly as well seen the posts where rows of the table are displayed as columns but, can we achieve both the functionalities at same time.
I have table as:
SO PO Date MAT QTY
1 A X Y1 10
K1 15
M2 11
2 B X1 Y2 5
M1 12
3 C 1x Z1 15
K1 6
L1 10
Now the ouput has to be :
SO PO Date MAT-Y1 MAT-K1 MAT-Y2 MAT-L1 Mat-Z1 MAT-M1 MAT-M2
1 A X 10 15 11
2 B X1 5 12
3 C 1X 6 10 15
I will not be knowing the number of materials untill runtime(dynamic) and as well the rows has to be displayed as columns. Is it possible to do that.
Regards
Edited by: Madhu Posanipalli on Jun 6, 2011 4:51 PMHi,
Check below code. It will work definitly.
*& Report YTEST_PROG_RP
REPORT YTEST_PROG_RP.
type-POOLs slis.
TYPES: BEGIN OF ty_tab,
so TYPE i,
po TYPE c,
date(2) TYPE c,
mat(2) TYPE c,
qty TYPE i,
END OF ty_tab.
DATA: itab TYPE STANDARD TABLE OF ty_tab INITIAL SIZE 0,
jtab TYPE STANDARD TABLE OF ty_tab INITIAL SIZE 0,
ktab TYPE STANDARD TABLE OF ty_tab INITIAL SIZE 0,
wa_tab TYPE ty_tab, wa_j TYPE ty_tab, wa_k TYPE ty_tab.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> type any.
*ALV data declarations
data: fieldcatalog type LVC_T_FCAT, " with header line, "slis_t_fieldcat_alv with header line,
fieldcatalog1 TYPE LVC_s_FCAT,
fieldcatalog2 type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
DATA t_newtable TYPE REF TO data.
DATA t_newline TYPE REF TO data.
DATA wa_flname TYPE string.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform dynamic_table.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
DATA: lv_field1 TYPE string, lv_cnt LIKE sy-tabix VALUE 3, itab_lines TYPE i.
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DATA: wa_cat LIKE LINE OF fieldcatalog2,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c. .
fieldcatalog1-fieldname = 'SO'.
fieldcatalog1-seltext = 'SO'.
fieldcatalog1-col_pos = 1.
fieldcatalog1-outputlen = 2.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog1 to fieldcatalog.
clear fieldcatalog1.
fieldcatalog1-fieldname = 'PO'.
fieldcatalog1-seltext = 'PO'.
fieldcatalog1-col_pos = 2.
fieldcatalog1-outputlen = 2.
append fieldcatalog1 to fieldcatalog.
clear fieldcatalog1.
fieldcatalog1-fieldname = 'DATE'.
fieldcatalog1-seltext = 'Date'.
fieldcatalog1-col_pos = 3.
fieldcatalog1-outputlen = 2.
append fieldcatalog1 to fieldcatalog.
clear fieldcatalog1.
LOOP AT itab INTO wa_tab.
lv_cnt = lv_cnt + 1.
CONCATENATE 'MAT-' wa_tab-mat into lv_field1.
TRANSLATE lv_field1 TO UPPER CASE.
fieldcatalog1-fieldname = lv_field1.
fieldcatalog1-seltext = lv_field1.
fieldcatalog1-col_pos = lv_cnt.
fieldcatalog1-outputlen = 6.
append fieldcatalog1 to fieldcatalog.
clear fieldcatalog1.
CLEAR: lv_field1, wa_tab.
ENDLOOP.
CLEAR lv_cnt.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = fieldcatalog
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
DESCRIBE TABLE fieldcatalog LINES itab_lines.
loop at fieldcatalog INTO fieldcatalog1.
CLEAR wa_cat.
wa_cat-fieldname = fieldcatalog1-fieldname.
wa_cat-seltext_s = fieldcatalog1-fieldname.
wa_cat-outputlen = fieldcatalog1-outputlen.
APPEND wa_cat TO fieldcatalog2.
CLEAR fieldcatalog1.
ENDLOOP.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog2[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = <t_dyntable>
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
DATA: lv_index LIKE sy-tabix.
wa_tab-so = 1.
wa_tab-po = 'A'.
wa_tab-date = 'X'.
wa_tab-mat = 'Y1'.
wa_tab-qty = 10.
append wa_tab to itab.
clear wa_tab.
wa_tab-mat = 'K1'.
wa_tab-qty = 15.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-mat = 'M2'.
wa_tab-qty = 11.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-so = 2.
wa_tab-po = 'B'.
wa_tab-date = 'X1'.
wa_tab-mat = 'Y2'.
wa_tab-qty = 5.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-mat = 'M1'.
wa_tab-qty = 12.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-so = 3.
wa_tab-po = 'C'.
wa_tab-date = '1x1'.
wa_tab-mat = 'Z1'.
wa_tab-qty = 15.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-mat = 'K1'.
wa_tab-qty = 6.
append wa_tab to itab.
CLEAR wa_tab.
wa_tab-mat = 'L1'.
wa_tab-qty = 10.
append wa_tab to itab.
CLEAR wa_tab.
LOOP AT itab INTO wa_tab.
if wa_tab-so is NOT INITIAL AND wa_tab-po is NOT INITIAL AND wa_tab-date is NOT INITIAL.
wa_j-so = wa_tab-so.
wa_j-po = wa_tab-po.
wa_j-date = wa_tab-date.
lv_index = wa_tab-so.
else.
READ TABLE itab INTO wa_j WITH KEY so = lv_index.
ENDIF.
wa_j-mat = wa_tab-mat.
wa_j-qty = wa_tab-qty.
APPEND wa_j to jtab.
CLEAR: wa_tab, wa_j.
ENDLOOP.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
**ALV Header declarations
*data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform. "top-of-page
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform. "END_OF_PAGE
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform. "END_OF_LIST
*& Form dynamic_table
text
--> p1 text
<-- p2 text
FORM dynamic_table .
DATA: lv_s1 TYPE string, lv_s2 TYPE string.
DATA lv_mat TYPE string.
DATA: fieldvalue(10) TYPE c.
ktab[] = jtab[].
delete ADJACENT DUPLICATES FROM ktab COMPARING so.
loop at ktab INTO wa_tab.
Field1
wa_flname = 'SO'.
fieldvalue = wa_tab-so.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
CLEAR fieldvalue.
Field2
wa_flname = 'PO'.
fieldvalue = wa_tab-po.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
CLEAR fieldvalue.
Field3
wa_flname = 'DATE'.
fieldvalue = wa_tab-date.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
CLEAR fieldvalue.
loop at jtab INTO wa_j WHERE so = wa_tab-so.
CONCATENATE 'MAT-' wa_j-mat INTO lv_mat.
wa_flname = lv_mat.
fieldvalue = wa_j-qty.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
CLEAR: wa_j, fieldvalue.
ENDLOOP.
APPEND <fs_dyntable> TO <t_dyntable>.
CLEAR wa_tab.
FREE <fs_dyntable>.
ENDLOOP.
ENDFORM. " dynamic_table
Ram. -
Problem in Data Display in Dynamic ALV Report
Hi all,
I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
REPORT zdynamic_test .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
ty_fcat TYPE lvc_s_fcat,
ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
wa_fcat TYPE ty_fcat,
wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
it_fcat TYPE STANDARD TABLE OF ty_fcat,
it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
it_dyn_tab TYPE REF TO data,
wa_newline TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
<gt_table> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY,
<l_field> TYPE ANY.
*Variables
DATA:
l_fieldname TYPE lvc_s_fcat-fieldname,
l_tabname TYPE lvc_s_fcat-tabname,
l_fieldtext TYPE lvc_s_fcat-seltext,
l_index TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
DO p_colms TIMES.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = sy-index.
ENDDO.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_itab.
l_index = sy-tabix.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = it_itab-matnr.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
PERFORM fieldcatalog1 USING: wa_fcat-fieldname
wa_fcat-tabname
wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZTEST_NOTEPAD'
it_fieldcat = it_fcatalog
TABLES
t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
DO p_colms TIMES.
CLEAR l_index.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'Field' l_index INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat
IMPORTING
ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND charg IN s_charg
AND fdate IN s_fdate.
COLLECT it_itab.
ENDSELECT.
v_srlno.
LOOP AT it_itab.
v_srlno = v_srlno + 1.
ENDLOOP.
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
1st Field
l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
Other fields
LOOP AT it_itab.
CLEAR l_index.
l_index = sy-tabix + 1.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDLOOP.
Please guide me how my problem will solve.
Thanks & Regards
NirmalHi all, I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
*& Report ZDYNAMIC_TEST *
REPORT zdynamic_test .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
ty_fcat TYPE lvc_s_fcat,
ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
wa_fcat TYPE ty_fcat,
wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
it_fcat TYPE STANDARD TABLE OF ty_fcat,
it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
it_dyn_tab TYPE REF TO data,
wa_newline TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
<gt_table> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY,
<l_field> TYPE ANY.
*Variables
DATA:
l_fieldname TYPE lvc_s_fcat-fieldname,
l_tabname TYPE lvc_s_fcat-tabname,
l_fieldtext TYPE lvc_s_fcat-seltext,
l_index TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
* DO 20 TIMES.
* DO p_colms TIMES.
* l_index = sy-index.
* CONCATENATE 'FIELD' l_index INTO l_fieldname.
* ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
* <l_field> = sy-index.
* ENDDO.
* INSERT <fs_dyntable> INTO TABLE <gt_table>.
* ENDDO.
LOOP AT it_itab.
l_index = sy-tabix.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = it_itab-matnr.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
PERFORM fieldcatalog1 USING: wa_fcat-fieldname
wa_fcat-tabname
wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZTEST_NOTEPAD'
it_fieldcat = it_fcatalog
TABLES
t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
* CLEAR: l_fieldname,
* l_tabname,
* l_fieldtext,
* l_index.
* DO p_colms TIMES.
* CLEAR l_index.
* l_index = sy-index.
* CONCATENATE 'FIELD' l_index INTO l_fieldname.
* CONCATENATE 'Field' l_index INTO l_fieldtext.
* l_tabname = '<GT_TABLE>'.
* PERFORM fieldcatalog USING: l_fieldname
* l_tabname
* l_fieldtext.
* ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat
IMPORTING
ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
* Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1
*& Form SELECT_DATA
* text
* --> p1 text
* <-- p2 text
FORM select_data .
* DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND charg IN s_charg
AND fdate IN s_fdate.
COLLECT it_itab.
ENDSELECT.
* v_srlno.
* LOOP AT it_itab.
* v_srlno = v_srlno + 1.
* ENDLOOP.
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
* 1st Field
* l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
* Other fields
LOOP AT it_itab.
CLEAR l_index.
l_index = sy-tabix + 1.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDLOOP.
ENDFORM. " SELECT_DATA -
ALV Display dynamic column with multiline header
Hi All.
I need to create alv display with dynamic number of columns. Also, it contains two header line. Kindly help me in coding.
The required format is this format.
Product | Week1 | Week2 |.......| WeekN
|--||---|--
| Sales | Sales |.......| Sales
|--| |---|--
PRD1 | value | Value |.......| Value
PRD2 | value | Value |.......| Value
PRD3 | value | Value |.......| Value
Thanks.
SadhnaHi Sadhana,
You mean to say that your internal Table contains
ABCDEF are the fields in your Internal table.
A--BCD---E-----F
1--12---13---a11----1
2--11---01---b9-----0
3--01---00---c32----0
4--14---01---d21----0
Now using Dynamic Internal Table it should display the output as follow :
A--BCF---a---b-c----d
1--12---13---111-9-32--21
Here you want to display the the fields of D as header and E as its corresponding values...?
Please let me knwo if you mean the same..
Regards,
Kittu -
Colors in Dynamic ALV table display
Hello All,
I have dynamic ALV table display in which i created the columns dynamically and finally binded that created node and diplayed the table ..
Now what i want to do is depending on some condition i need to change the colors in the table display..
I tried to set the color in this way inside the loop .
if lv_phase = '3'.
lr_column->set_cell_design( CL_WD_TABLE_COLUMN=>E_CELL_DESIGN-badvalue_medium ).
else.
lr_column->set_cell_design( CL_WD_TABLE_COLUMN=>E_CELL_DESIGN-standard ).
endif.
This piece of code either changes all the coloumns into one color only why it is not changing the color based upon the condition . I am unable to understand..
Please help me in this...Do i need to some thing else..Solved by creating a new column called cell design ... and settign the set_cell_design_fieldname ...
This solved my Problem .. -
ALV display using dynamic field catalog and dynamic internal table
hi ,
please guide me for ALV display using dynamic field catalog and dynamic internal table.
Thank you.Hi Rahul,
maybe thread dynamic program for alv is helpful for you. More information about the [SAP List Viewer (ALV)|http://help.sap.com/saphelp_nw70/helpdata/EN/5e/88d440e14f8431e10000000a1550b0/frameset.htm]. Also have a look into the example programs SALV_DEMO_TABLE*.
Regards Rudi -
Dynamic ALV Grid is not displaying !!
Hi all,
I am trying to create dynamic alv grids and upto five levels(five grids) out put is displaying fine without any problem. But when I try to display the 6th grid, the program is going into infinite loop and getting timed out. Even I tried to increse the height of the grid even though it is not displaying.
Please correct me if any thing is wrong in below code.
*1st Level grid
IF <table1> IS ASSIGNED AND <table1> IS NOT INITIAL.
CREATE OBJECT ob_split1
EXPORTING
parent = ob_custom
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split1 '20'.
CREATE OBJECT ob_grid1
EXPORTING
i_parent = ob_split1->top_left_container.
ELSE.
CREATE OBJECT ob_split1
EXPORTING
parent = ob_custom
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split1 '0'.
ENDIF.
*2nd Level grid
IF <table2> IS ASSIGNED AND <table2> IS NOT INITIAL.
CREATE OBJECT ob_split2
EXPORTING
parent = ob_split1->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split2 '20'.
CREATE OBJECT ob_grid2
EXPORTING
i_parent = ob_split2->top_left_container.
ELSE.
CREATE OBJECT ob_split2
EXPORTING
parent = ob_split1->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split2 '0'.
ENDIF.
(Created 3rd,4th,5th same like above).
*6th Level grid
IF <table6> IS ASSIGNED AND <table6> IS NOT INITIAL.
CREATE OBJECT ob_split6
EXPORTING
parent = ob_split5->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split6 '20'.
CREATE OBJECT ob_grid6
EXPORTING
i_parent = ob_split6->top_left_container.
ELSE.
CREATE OBJECT ob_split6
EXPORTING
parent = ob_split5->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split6 '0'.
ENDIF.
Appreciated your reply. Please let me know for additional info.
Thanks,
Ranjith.
Edited by: Thomas Zloch on Dec 8, 2010 5:44 PM - please use code tagsHi romanch,
defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
<alv_fieldcat>-cfieldname = 'HWAER'.
This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
Regards,
Clemens -
Code for hr-abap report in alv display
Hi Gurus,
I am new to hr-abap and I want some sample code to display a hr report in an alv.
Thanks,
Raj.This is one such...
REPORT yh_rep_hr_certified_instructor MESSAGE-ID yh_messages NO STANDARD
PAGE
HEADING .
Program : YH_REP_HR_CERTIFIED_INSTRUCTOR *
Description : Certified Instructor Eligibility Criteria *
TABLES *
TABLES :hrp1000 ,hrp1001, pa0000.
TYPE-POOLS *
*Type Pool for ALV display
TYPE-POOLS :slis. " Global types for generic cunning components
INTERNAL TABLES *
*Internal Table to keep Selection Screen field values
DATA : BEGIN OF t_validation OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA END OF t_validation.
*Internal Table for Business Event Groups
DATA : BEGIN OF t_bgrp OCCURS 0,
objid TYPE hrobjid,
blank(1),
stext TYPE stext,
END OF t_bgrp.
*Internal Table for Business Event Type IDs with text for selected Event
*GROUPS
DATA : BEGIN OF t_btyp OCCURS 0,
objid TYPE hrobjid,
blank(1),
stext TYPE stext,
END OF t_btyp.
*Internal Table for Business Event Type IDs for selected Event Groups
DATA : BEGIN OF t_eventtypelist OCCURS 0,
objid TYPE hrobjid,
END OF t_eventtypelist.
*Internal table to store the business Groups
DATA : BEGIN OF t_group OCCURS 0,
objid LIKE hrp1001-objid,
sobid LIKE hrp1001-sobid,
sclas LIKE hrp1001-sclas,
END OF t_group.
*Internal table to hold the business event group and/or bus. event types
DATA : BEGIN OF t_eventgroup OCCURS 0,
objid LIKE hrp1001-objid,
END OF t_eventgroup.
*Internal Table for FieldCatalog used for ALV Display
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
*Work Area for Checking Business Event Group Validity
DATA: BEGIN OF wa_bgrp,
objid TYPE hrobjid,
stext TYPE stext,
END OF wa_bgrp.
*Internal table to fetch object id for Qualification
DATA: BEGIN OF t_objid OCCURS 0,
objid TYPE hrp1000-objid,
sobid TYPE hrp1001-sobid,
sobid_copy TYPE hrp1001-objid,
END OF t_objid.
*Internal table to fetch Id of related object
*Fetches Pernr of Certified Instructors
DATA: BEGIN OF t_sobid OCCURS 0,
objid TYPE hrp1000-objid,
sobid TYPE hrp1001-sobid,
adatanr TYPE hrpad31-adatanr,
sobid_copy TYPE hrp1001-objid,
END OF t_sobid.
*Internal table to fetch skill rating
*of the Instructor
DATA: BEGIN OF t_prof OCCURS 0,
adatanr TYPE hrpad31-adatanr,
chara TYPE hrpad31-chara,
END OF t_prof.
*Internal table to fetch grade
*of the Insturctor
DATA: BEGIN OF t_grade OCCURS 0,
pernr TYPE pa0008-pernr,
yysalgr TYPE pa0008-yysalgr,
END OF t_grade.
*Internal table which contains all information about the Person like
*Name Project Project Manager Name Account and Vertical Name
DATA: t_projdetails TYPE zbapi_projdetails OCCURS 0 WITH HEADER LINE.
*Final Internal table which contains all information
*about the Instructors
DATA: BEGIN OF t_final OCCURS 0,
empid TYPE pa0000-pernr,
empname(84) TYPE c,
grade TYPE pa0008-yysalgr,
atndttt(3) TYPE c,
sklrate TYPE hrpad31-chara,
pgmng TYPE pa0001-ename,
accname TYPE hrp1000-stext,
vertname TYPE hrp1000-stext,
END OF t_final.
VARIABLES *
*ALV layout
DATA: gs_layout TYPE slis_layout_alv, "alvtot test
gt_events TYPE slis_t_event,
gt_list_top_of_page TYPE slis_t_listheader,
gs_variant LIKE disvariant, "For Layout
g_save. "For Layout Save
DATA: w_pos TYPE i VALUE 1, " Position of Fields in ALV
w_sort TYPE slis_t_sortinfo_alv, "ITab for Sorting Options
w_flag TYPE i,
w_repid TYPE sy-repid,
w_lineno TYPE sy-tabix.
DATA: l_short TYPE hrp1000-short. "variable to check the heirarchy
SELECTION-SCREEN DESIGN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001. "NO INTERVALS .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) text-009 MODIF ID xyz.
PARAMETERS : p_bgrp TYPE hrobjid OBLIGATORY,
p_bgrp1 TYPE stext .
SELECTION-SCREEN END OF LINE.
SELECT-OPTIONS :s_btyp FOR hrp1000-objid OBLIGATORY NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION *
INITIALIZATION.
*Assign Program Name into a variable
w_repid = sy-repid.
*Build layout for list display
gs_layout-detail_popup = 'X'.
*To get All Events in TOP-OF-PAGE
perform eventtab_build using gt_events[].
gs_variant-report = w_repid.
g_save = 'A'.
AT SELECTION SELECTION *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bgrp.
PERFORM get_bgrp.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_btyp-low.
IF NOT p_bgrp IS INITIAL .
PERFORM get_btyp USING 'l'.
ELSE .
MESSAGE s999 WITH text-e09.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_btyp-high.
IF NOT p_bgrp IS INITIAL .
PERFORM get_btyp USING 'h'.
ELSE .
MESSAGE s999 WITH text-e09.
ENDIF.
AT SELECTION-SCREEN ON p_bgrp.
SELECT SINGLE objid stext
FROM hrp1000
INTO wa_bgrp
WHERE objid = p_bgrp AND
otype = 'L' AND
plvar = '01' AND
( short = 'ROLE' OR
short = 'TECH_PROGRAM' ).
IF sy-subrc EQ 0.
p_bgrp1 = wa_bgrp-stext.
ELSE.
MESSAGE e999 WITH text-e09.
ENDIF.
AT SELECTION-SCREEN ON s_btyp.
CLEAR : t_eventtypelist, t_group, t_eventgroup.
REFRESH : t_eventtypelist, t_group, t_eventgroup.
CLEAR : w_flag.
*Fetch all the subordinates under given Event Group - L/D
SELECT objid
sobid
sclas
FROM hrp1001
INTO TABLE t_group
WHERE objid = p_bgrp
AND plvar = '01'
AND rsign = 'B'
AND relat = '003'
AND ( sclas = 'L' OR sclas = 'D' ).
WHILE w_flag <> 1.
PERFORM get_objids.
ENDWHILE.
IF NOT t_eventtypelist[] IS INITIAL.
*Get only valid Event Types from input Event Types, for given Event
*Group - by deleting others..
LOOP AT t_eventtypelist.
IF t_eventtypelist-objid IN s_btyp.
EXIT.
ELSE.
DELETE t_eventtypelist.
ENDIF.
AT LAST.
*since we r checking Event Types, All other fields will be locked
*but we need Event Group field to be unlocked to edit again,
*if theres no theres no valid Event Types in given input
LOOP AT SCREEN.
CHECK screen-name = 'P_bgrp'.
screen-input = '1'.
MODIFY SCREEN.
ENDLOOP.
MESSAGE e999 WITH text-e04.
EXIT.
ENDAT.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
CHECK screen-name = 'P_bgrp'.
screen-input = '1'.
MODIFY SCREEN.
ENDLOOP.
MESSAGE e999 WITH text-e03.
ENDIF.
FORM get_bgrp *
FORM get_bgrp .
SELECT objid stext
FROM hrp1000
INTO CORRESPONDING FIELDS OF TABLE t_bgrp
WHERE plvar = '01' AND
otype = 'L' AND
short = 'ROLE' OR
short = 'TECH_PROGRAM' .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
endpos_col = 75
endpos_row = 20
startpos_col = 30
startpos_row = 05
titletext = 'Select Business Event Group'
IMPORTING
choise = w_lineno
TABLES
valuetab = t_bgrp
EXCEPTIONS
break_off = 1
OTHERS = 2.
IF sy-subrc EQ 0 .
READ TABLE t_bgrp INDEX w_lineno.
IF sy-subrc EQ 0.
p_bgrp = t_bgrp-objid.
p_bgrp1 = t_bgrp-stext.
ENDIF .
CLEAR t_bgrp .
REFRESH t_bgrp .
ENDIF .
ENDFORM . "get_bgrp
****subroutine for business eventtype input criteria
FORM get_btyp USING f_range.
CLEAR : t_validation,
t_btyp,
t_eventtypelist,
t_group,
t_eventgroup,
w_flag.
REFRESH : t_validation,
t_btyp,
t_eventtypelist,
t_group,
t_eventgroup.
t_validation-fieldname = 'P_BGRP'.
APPEND t_validation.
CLEAR t_validation.
*Getting Screen Values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = w_repid
dynumb = '1000'
TABLES
dynpfields = t_validation
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE t_validation WITH KEY fieldname = 'P_BGRP'.
IF NOT t_validation-fieldname IS INITIAL.
*Getting Event Group ID that entered
LOOP AT t_validation.
IF t_validation-fieldname = 'P_BGRP'.
p_bgrp = t_validation-fieldvalue.
ENDIF.
ENDLOOP.
CLEAR t_validation.
REFRESH t_validation.
*To fetch the business event groups and business event types that belong
to the input business event group.Since a business group can have a
*business groups as well as business event types we have pick all of
*them
*Getting all subordinates - Event Group/Type under given Event Group
SELECT objid
sobid
sclas
FROM hrp1001
INTO TABLE t_group
WHERE objid = p_bgrp
AND plvar = '01'
AND rsign = 'B'
AND relat = '003'
AND endda = '99991231'
AND ( sclas = 'L' OR sclas = 'D' ).
*Getting all Event Types
WHILE w_flag <> 1.
PERFORM get_objids.
ENDWHILE.
IF NOT t_eventtypelist[] IS INITIAL.
SORT t_eventtypelist BY objid.
*Getting Names of Event Types
SELECT objid
stext
FROM hrp1000
INTO CORRESPONDING FIELDS OF TABLE t_btyp
FOR ALL ENTRIES IN t_eventtypelist
WHERE objid = t_eventtypelist-objid
AND otype = 'D' AND plvar = '01'
AND endda = '99991231'.
IF sy-subrc = 0.
*PopUp Display for Event Types
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
endpos_col = 75
endpos_row = 20
startpos_col = 30
startpos_row = 05
titletext = 'Select Business Event Type ID'
IMPORTING
choise = w_lineno
TABLES
valuetab = t_btyp
EXCEPTIONS
break_off = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
*Since the Table returned by function module will have data in Header,
*clear the Header
*Retreive Selected Event Type into Select Option
READ TABLE t_btyp INDEX w_lineno.
IF sy-subrc EQ 0.
IF f_range = 'l'.
s_btyp-low = t_btyp-objid.
ELSE.
s_btyp-high = t_btyp-objid.
ENDIF.
ENDIF.
ENDIF.
ELSE.
MESSAGE s999 WITH text-e03.
ENDIF.
ELSE.
MESSAGE s999 WITH text-e01.
ENDIF.
ENDIF.
ENDFORM. " EVNTTY
FORM get_objids *
FORM get_objids.
*To delete the business event types that are found and push it in
*another table
IF NOT t_group[] IS INITIAL.
LOOP AT t_group.
*If event type
IF t_group-sclas = 'D'.
t_eventtypelist-objid = t_group-sobid.
APPEND t_eventtypelist.
CLEAR t_eventtypelist.
DELETE t_group.
*If event group
ELSEIF t_group-sclas = 'L'.
t_eventgroup-objid = t_group-sobid.
APPEND t_eventgroup.
CLEAR t_eventgroup.
DELETE t_group.
CLEAR t_group.
ENDIF.
ENDLOOP.
ELSE.
w_flag = 1.
ENDIF.
IF NOT t_eventgroup[] IS INITIAL.
*To get the second level of business groups and business event type
SELECT objid sobid sclas
FROM hrp1001
INTO TABLE t_group
FOR ALL ENTRIES IN t_eventgroup
WHERE objid = t_eventgroup-objid
AND plvar = '01'
AND rsign = 'B'
AND relat = '003'
AND endda = '99991231'
AND ( sclas = 'L' OR sclas = 'D' ).
CLEAR t_eventgroup.
REFRESH t_eventgroup.
ENDIF.
ENDFORM. " GET_OBJIDS
Start of Selection *
START-OF-SELECTION.
*Pass the Event Type and fetch the Related Id
*for the Qualification imparted by the Event
SELECT objid sobid
FROM hrp1001
INTO TABLE t_objid
WHERE objid IN s_btyp AND
otype = 'D' AND
plvar = '01' AND
relat = '028' AND
rsign = 'A' AND
sclas = 'Q'.
IF sy-subrc EQ 0.
*Pass the Qualification Id and fetch Object Id of the
*person who fulfills this Qualification
SELECT objid sobid adatanr
FROM hrp1001
INTO TABLE t_sobid FOR ALL ENTRIES IN t_objid
WHERE sobid = t_objid-sobid AND
otype = 'P' AND
plvar = '01' AND
relat = '032' AND
rsign = 'A' AND
sclas = 'Q' .
IF sy-subrc = 0.
*Fetch only the Person along with the skillrating
*who has skill rating as '0001' or '0003'
SELECT adatanr chara
FROM hrpad31
INTO TABLE t_prof
FOR ALL ENTRIES IN t_sobid
WHERE adatanr = t_sobid-adatanr AND
( chara = '0001' OR chara = '0003' ).
IF sy-subrc NE 0.
MESSAGE s999 WITH text-s01.
EXIT .
ELSE .
*Fetch only Employee Id's who meets the required skill rating
*which inturn has the EMPID who are all are Certified Instructors
LOOP AT t_sobid.
READ TABLE t_prof WITH KEY adatanr = t_sobid-adatanr.
IF sy-subrc NE 0.
DELETE t_sobid .
ENDIF.
ENDLOOP.
SORT t_sobid BY objid.
DELETE ADJACENT DUPLICATES FROM t_sobid.
ENDIF.
ENDIF.
ENDIF.
IF NOT t_sobid[] IS INITIAL.
data: begin of it_trgpernr occurs 0,
objid type hrp1000-objid,
sobid type hrp1001-sobid,
end of it_trgpernr.
select objid sobid
from hrp1001
into table it_trgpernr for all entries in t_sobid
where otype ='P' and
objid = t_sobid-objid and
sclas = 'D' and
sobid = '50008220'.
*Fetch Grade of the Certified Instructors by passing their EmpId's
SELECT pernr yysalgr
FROM pa0008
INTO TABLE t_grade
FOR ALL ENTRIES IN t_sobid
WHERE pernr = t_sobid-objid AND endda = '99991231'.
ENDIF.
For Heading in the Output Display Layout
PERFORM heading USING gt_list_top_of_page[].
End of Selection *
END-OF-SELECTION.
Populating data into Final Table which contains all information aboutthe Certified Instructors
*Retrieve Employee Id for the Certified Instructors only if he is active
LOOP AT t_sobid.
SELECT SINGLE *
FROM pa0000
WHERE pernr = t_sobid-objid AND
begda <= sy-datum AND
endda >= sy-datum AND
stat2 ='3'.
IF sy-subrc = 0.
t_final-empid = t_sobid-objid.
SELECT SINGLE *
FROM hrp1001
WHERE otype = 'P' AND
objid = t_sobid-objid AND
rsign = 'B' AND
relat = '25' AND
sclas = 'D' AND
sobid = '50008220'.
*DATA:W_SOBID TYPE HRP1001-SOBID.
*W_SOBID = t_sobid-objid. .
SELECT SINGLE *
FROM hrp1001
WHERE otype = 'D' AND
objid = '50008220' AND
rsign = 'B' AND
relat = '25' AND
sclas = 'P' AND
sobid = W_SOBID.
IF sy-subrc EQ 0.
t_final-atndttt = 'YES'.
ELSE.
t_final-atndttt = 'NO'.
ENDIF.
*Retrieve Employee SkillRating for the Certified Instructors
*by passing the adatanr value which inturn is fetched based on the empid
READ TABLE t_prof WITH KEY adatanr = t_sobid-adatanr.
IF sy-subrc EQ 0.
t_final-sklrate = t_prof-chara.
ENDIF.
*Retrieve Employee Grade for the given id
READ TABLE t_grade WITH KEY pernr = t_sobid-objid.
IF sy-subrc EQ 0.
t_final-grade = t_grade-yysalgr.
ENDIF.
REFRESH t_projdetails.
CLEAR t_projdetails.
*function which fetches the name project name account and
*vertical name of the person for the given empid
CALL FUNCTION 'ZBAPI_PROJDETAILS'
EXPORTING
pernr = t_sobid-objid
TABLES
it_finaltab = t_projdetails.
IF NOT t_projdetails[] IS INITIAL.
SHIFT t_sobid-objid LEFT DELETING LEADING '0'.
READ TABLE t_projdetails WITH KEY pernr = t_sobid-objid.
IF sy-subrc EQ 0.
t_final-empname = t_projdetails-ename.
IF NOT t_projdetails-proj IS INITIAL.
t_final-pgmng = t_projdetails-pmname.
ELSE.
t_final-pgmng = t_projdetails-gmname.
ENDIF.
t_final-accname = t_projdetails-accname.
t_final-vertname = t_projdetails-vertname.
ENDIF.
ENDIF.
APPEND t_final.
ENDIF.
CLEAR t_final.
ENDLOOP.
SORT t_final BY empid.
DELETE ADJACENT DUPLICATES FROM t_final.
*Enabling Sort by PERNR & Global ID in ALV display
PERFORM sub_sort_info.
*Form to Populate Field Catalog
PERFORM populate_fieldcatalog.
For the ALV ROW Optimize Width
gs_layout-colwidth_optimize = 'X' .
*perform alv_display tables final fieldcatalog.
IF NOT t_final[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
is_layout = gs_layout
it_fieldcat = t_fieldcatalog[]
it_sort = w_sort
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = t_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
MESSAGE s000(vz) WITH 'No Records found for Given Input Criteria'.
ENDIF.
TOP OF PAGE *
*Outputs formatted simple header information at TOP-OF-PAGE.
TOP-OF-PAGE.
PERFORM top_of_page.
Subroutines *
*& Form eventtab_build
text`
-->P_GT_EVENTS[] text
FORM eventtab_build USING rt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
DATA: g_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = rt_events.
READ TABLE rt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE g_top_of_page TO ls_event-form.
APPEND ls_event TO rt_events.
ENDIF.
ENDFORM. " eventtab_build
*& Form HEADING
text
FORM heading USING lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Layout Display Text - "Caritor ( India ) Pvt.Ltd "
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-h01.
APPEND ls_line TO lt_top_of_page.
*Layout Display Text - "Certified Instructor Eligibility List "
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-h02.
APPEND ls_line TO lt_top_of_page.
ENDFORM. " HEADING
*& Form top_of_page
text
--> p1 text
<-- p2 text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM. " top_of_page
*& Form sub_sort_info
text
--> p1 text
<-- p2 text
FORM sub_sort_info.
DATA : l_sort TYPE slis_sortinfo_alv .
CLEAR l_sort.
Employee ID
l_sort-fieldname = 'EMPID'.
l_sort-up = 'X'.
APPEND l_sort TO w_sort.
ENDFORM. " sub_sort_info
*& Form populate_fieldcatalog
text
--> p1 text
<-- p2 text
FORM populate_fieldcatalog.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'EMPID' ' ' text-011 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'EMPNAME' ' ' text-002 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'GRADE' ' ' text-003 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'ATNDTTT' ' ' text-004 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'PGMNG' ' ' text-006 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'ACCNAME' ' ' text-007 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'VERTNAME' ' ' text-008 20 w_pos.
PERFORM fill_fields_of_fieldcatalog
TABLES t_fieldcatalog
USING 'T_FINAL' 'SKLRATE' ' ' text-005 20 w_pos.
ENDFORM. " populate_fieldcatalog
*& Form FILL_FIELDS_OF_FIELDCATALOG
text
-->P_T_FIELDCATALOG text
-->P_0870 text
-->P_0871 text
-->P_0872 text
-->P_TEXT_001 text
-->P_20 text
-->P_W_POS text
FORM fill_fields_of_fieldcatalog TABLES fp_t_fieldcatalog STRUCTURE
t_fieldcatalog
USING fp_table
fp_field
fp_key
fp_text
fp_out_len
fp_pos.
fp_t_fieldcatalog-tabname = fp_table.
fp_t_fieldcatalog-fieldname = fp_field.
fp_t_fieldcatalog-seltext_l = fp_text.
fp_t_fieldcatalog-key = fp_key.
fp_t_fieldcatalog-outputlen = fp_out_len.
fp_t_fieldcatalog-col_pos = fp_pos.
APPEND fp_t_fieldcatalog.
CLEAR: fp_t_fieldcatalog.
fp_pos = fp_pos + 1.
ENDFORM. " FILL_FIELDS_OF_FIELDCATALOG
10.249.11.136\SAP-StudyMaterial -
Dynamic ALV and cl_abap_structdescr Create method
Hi
In the process of creation of Dynamic ALV, as I have char_name and char_descr fields, I have to use char_descr as column header of ALV because char_name which has entries something like DVS_******(that do not make any sense to user). I am facing 2 problems here using the scenario above.
1. char_descr contains characters like '[', ']', ' /', '.', space which are invalid characters for method cl_abap_structdescr=>create(). How to handle scenario like this?
2. assign (lv_value) to <value>.
if sy-subrc = 0.
<value> = ls_bapi_char_value-charvalue.
if <value> is assigned.
move ls_bapi_char_value-charvalue to <value>.
where-> concatenate '<table_dyn_wa>-' ls_bapi_char-char_descr into lv_value
<value> type any
<table_dyn_wa>- is dynamic table with structure created with cl_abap_tabledescr=>create( p_line_type = stru_type )
with above code for few fields data is being assigned and for few sy-subrc = 4. The table from where I am reading the field contains char_name associated with it and not char_descr. For the fields whose char_name and char_descr matches exactly, ALV displays data for it.
How to resolve the issue so that I could get all the data?
Let me know if further details are needed.
Thanks, in advance
Trupti
Edited by: TRUPTI KALLURWAR on Jul 9, 2010 7:08 PMHello Srikanth,
CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE( ) uses the GENERATE SUBROUTINE POOL technique to create the dynamic internal tables.
And as per the SAP documentation,
In an internal mode, a maximum of 36 temporary subroutine pools may be created.
Source: [http://help.sap.com/abapdocu_702/en/abapgenerate_subroutine_pool.htm]
Btw why are you crating 36 dynamic internal table? That's way too far-fetched even for the RTTC classes
BR,
Suhas -
hi gurus,
I have a ALV Display report with Sub totals at two levels.
plant wise and category wise
plant1
category1
subtot
category2
subtot
subtot
plant2
category1
subtot
category2
subtot
subtot
Now the subtotals are being displayed for both the plant wise and category wise, but they are displayed with the same row color.
so, now i want these two subtotal rows with different ROW COLORS.
so where should i change for acheving the above.
thanks in advance.
chaitanyaHi,
Check this coding it will help you alot and also check the TCode LIBS & BIBS u can find more examples here
code&----
*& Report ZALVCOLOR *
REPORT ZALVCOLOR .
DATA : mara TYPE mara. " General Material Data
TYPE-POOLS: slis. " ALV Global types
FIELD-SYMBOLS :
<data> TYPE table. " Data to display
SELECT-OPTIONS :
s_matnr FOR mara-matnr. " Material number
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(2) TYPE n DEFAULT '50' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of lines to display'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
Form f_read_data
FORM f_read_data.
FIELD-SYMBOLS :
<field> TYPE ANY,
<field2> TYPE ANY,
<header> TYPE ANY,
<header2> TYPE ANY,
<lt_data> TYPE table. " Data read from DB
DATA:
lp_struct TYPE REF TO data,
lp_struct2 TYPE REF TO data,
lp_table TYPE REF TO data, " Pointer to dynamic table
lp_table2 TYPE REF TO data, " Pointer to dynamic table
ls_lvc_cat TYPE lvc_s_fcat,
lt_lvc_cat TYPE lvc_t_fcat. " Field catalog
First column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MATNR'.
ls_lvc_cat-ref_table = 'MARA'.
APPEND ls_lvc_cat TO lt_lvc_cat.
2nd column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MAKTX'.
ls_lvc_cat-ref_table = 'MAKT'.
APPEND ls_lvc_cat TO lt_lvc_cat.
3rd column
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'MATKL'.
ls_lvc_cat-ref_table = 'MARA'.
APPEND ls_lvc_cat TO lt_lvc_cat.
Create 1st internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = lt_lvc_cat
IMPORTING ep_table = lp_table.
ASSIGN lp_table->* TO <lt_data>.
Read data into 1st internal table
SELECT matnr maktx matkl
INTO TABLE <lt_data>
FROM v_matnr
UP TO p_max ROWS
WHERE matnr IN s_matnr.
Create 2nd internal table
Checkbox
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'CHECKBOX'.
APPEND ls_lvc_cat TO lt_lvc_cat.
Table color
CLEAR ls_lvc_cat.
ls_lvc_cat-fieldname = 'TABCOLOR'.
ls_lvc_cat-ref_table = 'CALENDAR_TYPE'.
ls_lvc_cat-ref_field = 'COLTAB'.
APPEND ls_lvc_cat TO lt_lvc_cat.
Create 2nd internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = lt_lvc_cat
IMPORTING ep_table = lp_table2.
ASSIGN lp_table2->* TO <data>.
Create structure = structure of the 1st internal table
CREATE DATA lp_struct LIKE LINE OF <lt_data>.
ASSIGN lp_struct->* TO <header>.
Create structure = structure of the 2nd internal table
CREATE DATA lp_struct2 LIKE LINE OF <data>.
ASSIGN lp_struct2->* TO <header2>.
Move data from 1st internal table --> 2nd internal table
LOOP AT <lt_data> ASSIGNING <header>.
DESCRIBE TABLE lt_lvc_cat.
CLEAR <header2>.
Fill the internal to display <data>
DO sy-tfill TIMES.
READ TABLE lt_lvc_cat INTO ls_lvc_cat INDEX sy-index.
For each field of lt_lvc_cat.
ASSIGN COMPONENT ls_lvc_cat-fieldname OF STRUCTURE <header>
TO <field>.
IF sy-subrc NE 0. EXIT .ENDIF.
ASSIGN COMPONENT ls_lvc_cat-fieldname OF STRUCTURE <header2>
TO <field2>.
IF sy-subrc NE 0. EXIT .ENDIF.
<field2> = <field>.
ENDDO.
Modify color
ASSIGN COMPONENT 'TABCOLOR' OF STRUCTURE <header2>
TO <field2>.
IF sy-subrc EQ 0.
PERFORM f_modify_color USING 'MAKTX' <field2>.
PERFORM f_modify_color USING 'MATKL' <field2>.
ENDIF.
APPEND <header2> TO <data> .
ENDLOOP.
ENDFORM. " f_read_data
Form F_DISPLAY_DATA
FORM f_display_data.
Macro definition
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-down = 'X'.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv. " Field catalog
Build Fieldcatalog - First column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'MARA'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO lt_fieldcat.
Build Fieldcatalog - 2nd column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MAKTX'.
ls_fieldcat-ref_tabname = 'MAKT'.
APPEND ls_fieldcat TO lt_fieldcat.
Build Fieldcatalog - 3rd column
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATKL'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO lt_fieldcat.
Layout
ls_layout-zebra = 'X'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-box_fieldname = 'CHECKBOX'.
ls_layout-coltab_fieldname = 'TABCOLOR'.
m_sort 'MATNR'. " Sort by creation date
Display data
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = <data>.
ENDFORM. " F_DISPLAY_DATA
Form F_modify_color
FORM f_modify_color USING u_fieldname TYPE lvc_fname
ut_tabcolor TYPE table.
DATA:
l_rnd_value TYPE datatype-integer2,
ls_tabcolor TYPE lvc_s_scol.
Random value
CALL FUNCTION 'RANDOM_I2'
EXPORTING
rnd_min = 0
rnd_max = 3
IMPORTING
rnd_value = l_rnd_value.
CLEAR ls_tabcolor.
ls_tabcolor-fname = u_fieldname.
CASE l_rnd_value.
WHEN 0.
ls_tabcolor-color-col = 1. " Blue.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 1.
ls_tabcolor-color-col = 3. " Yellow.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 2.
ls_tabcolor-color-col = 5. " Green.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
WHEN 3.
ls_tabcolor-color-col = 6. " Red.
ls_tabcolor-color-int = 0.
ls_tabcolor-color-inv = 0.
ENDCASE.
INSERT ls_tabcolor INTO TABLE ut_tabcolor.
ENDFORM. " F_MODIFY_COLOR[/code]
Regards,
Raj. -
Problem in Dynamic ALV - inserting values in proper field of a table.
Hi gurus,
As per the user requirement I need to create a dynamic alv report. The fields will be display according to the period entered.
I have already build the alv and it is working fine. But My questio is how can I append data into internal table in its proper field.
suppose I have enter period 1 to 3 in selection screen. Then my table structure will be
JAN | FEB | MAR
Upto this is is working fine, fields are generated dynamically , but how can I insert data only in perticular field.
like
itab-JAN = 001.
itab-FEB = 002.
itab-MAR = 003.
append itab
JAN | FEB | MAR
001 002 003
Please give me a solution of that. waiting for reply.hI,
loop at <dyn_table> assigning <wa>.
lv_count = 001.
*perform get_short_tet of month in a varibale say lv_var
assign component LV_VAR of structure <wa> to <dyn_field1>.
<dyn_field1> = lv_count.
lv_count = lv_count + 1.
endloop.
Regards,
mrunal
Edited by: Mrunal Shyamkant Patki on Nov 5, 2009 10:53 AM
Edited by: Mrunal Shyamkant Patki on Nov 5, 2009 10:54 AM -
I want to create dynamic ALV report
Hi great abapers,
I want to create dynamic ALV report.Please help me.
Regards,
BillaHi,
Please check the code below:
REPORT YMMR_PALLET_OVERVIEW MESSAGE-ID Y_MESSAGE_0001.
Short description:
To Display and sum up the Quantity of scanned materials on pallet for*
each Shipment number for the Packaging Materials. *
TYPE-POOLS : SLIS.
TABLES: YYLE0003. " Scanned SSCC No.
--Structure Declaration--
Structure for Shipment No. and Date.
TYPES : BEGIN OF T_VTTK_TAB ,
TKNUM LIKE VTTK-TKNUM, " Shipment number
ERDAT LIKE VTTK-ERDAT, " created Date
END OF T_VTTK_TAB .
Structure for Shipment No., Packaging Materials and Date.
TYPES: BEGIN OF T_ITAB2,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P,
ERDAT LIKE YYLE0003-ERDAT, " created Date
COUNT TYPE I,
END OF T_ITAB2.
Structure for Shipment No. and Packaging Materials.
TYPES: BEGIN OF T_ITAB3,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF T_ITAB3.
--Internal table Declaration--
*Internal tables for the above Declared structures
DATA: G_VTTK_TAB TYPE TABLE OF T_VTTK_TAB,
G_ITAB5_TAB TYPE TABLE OF T_ITAB2,
G_ITAB4_TAB TYPE TABLE OF T_ITAB3,
G_ITAB3_TAB TYPE TABLE OF T_ITAB2. "#EC NEEDED
*Internal table Holding Shipment No.and quantity
DATA: BEGIN OF G_TOTAL_TAB OCCURS 0 ,
TKNUM TYPE YYLE0003-TKNUM, " Shipment number
QUANTITY TYPE P,
COUNT TYPE I,
END OF G_TOTAL_TAB .
*Internal table for selection screen data
DATA: BEGIN OF G_SCANDATA_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF G_SCANDATA_TAB.
DATA: BEGIN OF ST_SCANDATA_TAB,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF ST_SCANDATA_TAB.
DATA: BEGIN OF G_SCANDATA_COUNT_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
COUNT TYPE I,
END OF G_SCANDATA_COUNT_TAB.
DATA: L_COUNT TYPE I.
*Internal table for Packaging Materials and quantity
DATA: BEGIN OF G_ITAB6_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF G_ITAB6_TAB.
*- Field catalog
DATA: L_ALV_CAT1_TAB TYPE TABLE OF LVC_S_FCAT.
--Work area Declaration--
DATA: WA_VTTK TYPE T_VTTK_TAB,
WA_ITAB3 TYPE T_ITAB2,
WA_ITAB5 TYPE T_ITAB2,
WA_ITAB4 TYPE T_ITAB3,
WA_ITAB1 LIKE G_SCANDATA_TAB,
WA_ALV_CAT1 LIKE LINE OF L_ALV_CAT1_TAB.
----Variable Defnition -
DATA: G_CUSTOM_CONTAINER_0100 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_ALV_GRID_0100 TYPE REF TO CL_GUI_ALV_GRID,
G_CONTAINER_0100 TYPE SCRFNAME VALUE 'LIST',
G_MYLAYOUT TYPE LVC_S_LAYO, "#EC NEEDED
G_WA TYPE REF TO DATA.
DATA: G_VAR TYPE I, " No of records
G_VAR1 TYPE CHAR20. " Variable
--field symbols Declaration--
FIELD-SYMBOLS : <F_FS> TYPE TABLE,
<F_FS3> TYPE ANY,
<F_FS4> TYPE ANY,
<F_FS5> TYPE ANY,
<F_WA> TYPE ANY,
<F_FS15> TYPE ANY,
<F_FS16> TYPE SY-DATUM,
<F_FS2> TYPE T_ITAB2,
<F_FS6> TYPE ANY,
<F_FS7> TYPE ANY,
<F_FS12> TYPE ANY,
<F_FS13> TYPE ANY.
--Selection Parameters--
SELECTION-SCREEN: BEGIN OF BLOCK BLCK01 WITH FRAME TITLE TEXT-000.
"Select options
SELECT-OPTIONS :
S_TKNUM FOR YYLE0003-TKNUM , " Shipment number
S_YYREF FOR YYLE0003-YY_REFERENCE, " Packing reference
S_YYREFT FOR YYLE0003-YY_REFTP, " Reference type
S_EXIDV FOR YYLE0003-EXIDV, " External HU
S_MATNR FOR YYLE0003-MATNR, " Material number
S_VBELN FOR YYLE0003-VBELN, " SD number
S_POSNR FOR YYLE0003-POSNR, " Item number
S_LGTOR FOR YYLE0003-LGTOR, " Door for Wr Hs No
S_VHILM FOR YYLE0003-VHILM, " Packaging Mat
S_YYMEIN FOR YYLE0003-YY_MEINH, " Indicator for UOM
S_QUANTI FOR YYLE0003-QUANTITY, " Quantity
S_YCHECK FOR YYLE0003-YYCHECKED, " Destination_door
S_STATUS FOR YYLE0003-STATUS, " Packing status
S_STASHI FOR YYLE0003-STATUSSHIPTO, " Status on ship-to
S_LOADTR FOR YYLE0003-LOADTRUCK, " Load truck
S_ERDAT FOR YYLE0003-ERDAT , " Date
S_ERZET FOR YYLE0003-ERZET, " Entry time
S_AEDAT FOR YYLE0003-AEDAT, " Last changed on
S_ERNAM FOR YYLE0003-ERNAM, " Name of Person
S_AEZET FOR YYLE0003-AEZET, " Time last change
S_AENAM FOR YYLE0003-AENAM. " Name of person
SELECTION-SCREEN: END OF BLOCK BLCK01.
--INITIALIZATION--
INITIALIZATION.
Clear the variables and workarea
CLEAR :G_VAR,
G_VAR1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1.
--AT SELECTION-SCREEN--
AT SELECTION-SCREEN.
To validate the data entered in selection screen
PERFORM SUB_VALIDATE.
--START-OF-SELECTION--
START-OF-SELECTION.
*To fetch the data from table yyle0003
PERFORM GET_INPUT_DATA.
*To create the Dynamic Field Catalog
PERFORM GET_FIELDCAT.
To populate the data to final table
PERFORM GET_FINAL_DATA.
MODULE status_0100 OUTPUT *
MODULE STATUS_0100 OUTPUT.
*set title bar and PF status.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK SY-UCOMM IS INITIAL.
SORT G_SCANDATA_TAB BY TKNUM VHILM.
*Create object for Custom container
CREATE OBJECT G_CUSTOM_CONTAINER_0100
EXPORTING
CONTAINER_NAME = G_CONTAINER_0100
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
*Create object for ALV grid
CREATE OBJECT G_ALV_GRID_0100
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_0100.
G_MYLAYOUT-GRID_TITLE = 'Display Scanning data'.
*Call method for table Display
CALL METHOD G_ALV_GRID_0100->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_OUTTAB = <F_FS>
IT_FIELDCATALOG = L_ALV_CAT1_TAB
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User Interaction
MODULE USER_COMMAND_0100 INPUT.
CALL METHOD CL_GUI_CFW=>DISPATCH.
*To exit , back or cancel
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form get_input_data
This sub routine will get the data from yyle0003 table.
FORM GET_INPUT_DATA.
CONSTANTS: C_DOT TYPE C VALUE '.',
C_CHAR TYPE C VALUE 'D'.
CLEAR G_SCANDATA_TAB.
Get the data from yyle0003
SELECT VHILM " Packaging Materials
EXIDV " External Handling Unit
TKNUM " Shipment number
QUANTITY " Quantity
FROM YYLE0003
INTO TABLE G_SCANDATA_TAB
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
If VHILM contains any Decimal '.', replace it with D
LOOP AT G_SCANDATA_TAB.
REPLACE C_DOT WITH C_CHAR INTO G_SCANDATA_TAB-VHILM.
IF SY-SUBRC = 0.
MODIFY G_SCANDATA_TAB TRANSPORTING VHILM.
ENDIF.
CLEAR G_SCANDATA_TAB.
ENDLOOP.
*To get the Shipment No Creation date from VTTK.
SELECT TKNUM
ERDAT
FROM VTTK
INTO TABLE G_VTTK_TAB
WHERE TKNUM IN S_TKNUM.
SORT G_SCANDATA_TAB BY VHILM EXIDV. "TKNUM VHILM.
*To get the repeatition of Pacakaging material for each Shipment.
*--- to find the count of packaging materials under each shipment
LOOP AT G_SCANDATA_TAB.
READ TABLE G_SCANDATA_TAB INTO ST_SCANDATA_TAB INDEX SY-TABIX.
AT END OF EXIDV.
L_COUNT = L_COUNT + 1.
MOVE-CORRESPONDING ST_SCANDATA_TAB TO G_SCANDATA_COUNT_TAB.
G_SCANDATA_COUNT_TAB-COUNT = L_COUNT.
CLEAR: ST_SCANDATA_TAB, L_COUNT.
COLLECT G_SCANDATA_COUNT_TAB.
ENDAT.
CLEAR : G_SCANDATA_TAB.
ENDLOOP.
ENDFORM. " get_input_data
*& Form sub_validate
*This subroutine will validate the data eneterd in the selection screen
FORM SUB_VALIDATE.
*Varaiable declaration for Shipment number
DATA: L_TKNUM TYPE YYLE0003-TKNUM."#EC NEEDED " Shipment number
*- Condition will not qualify all primary key (IDENT)
SELECT TKNUM FROM YYLE0003 UP TO 1 ROWS
INTO L_TKNUM "wa_scandata
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E987 . " No data found for these selection criterias
ENDIF.
ENDFORM. " sub_validate
*& Form get_fieldcat
Preparing Field catalog
FORM GET_FIELDCAT.
DATA: L_REF TYPE REF TO DATA,
L_I TYPE I. " Variable
CONSTANTS: C_CENTER TYPE C VALUE 'C'. " Center Justified
LOOP AT G_SCANDATA_TAB INTO WA_ITAB1.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB3.
APPEND WA_ITAB3 TO G_ITAB3_TAB.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB4.
COLLECT WA_ITAB4 INTO G_ITAB4_TAB.
*To sum up the qunatity field for each TKNUM.
AT END OF TKNUM.
SUM.
MOVE WA_ITAB1-TKNUM TO G_TOTAL_TAB-TKNUM.
MOVE WA_ITAB1-QUANTITY TO G_TOTAL_TAB-QUANTITY .
APPEND G_TOTAL_TAB.
CLEAR G_TOTAL_TAB.
ENDAT.
CLEAR : WA_ITAB1,
WA_ITAB3,
WA_ITAB4.
ENDLOOP.
*--- Begin of change - SKR.EXT - EBDK986377
SORT G_ITAB4_TAB BY TKNUM.
*--- End of change - SKR.EXT - EBDK986377
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
MOVE-CORRESPONDING WA_ITAB4 TO WA_ITAB5.
MOVE-CORRESPONDING WA_ITAB4 TO G_ITAB6_TAB.
*---- to get the count
READ TABLE G_SCANDATA_COUNT_TAB WITH KEY TKNUM = WA_ITAB5-TKNUM
VHILM = WA_ITAB5-VHILM.
IF SY-SUBRC EQ 0.
WA_ITAB5-COUNT = G_SCANDATA_COUNT_TAB-COUNT.
ENDIF.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
COLLECT G_ITAB6_TAB.
ENDLOOP.
CLEAR : WA_ITAB3.
SORT G_ITAB4_TAB BY TKNUM VHILM.
DELETE ADJACENT DUPLICATES FROM G_ITAB4_TAB COMPARING VHILM.
*To get the Number of fields to be displayed
DESCRIBE TABLE G_ITAB4_TAB LINES G_VAR.
L_I = '3'.
*Field catalog
WA_ALV_CAT1-FIELDNAME = 'TKNUM'(002).
WA_ALV_CAT1-COL_POS = 1.
WA_ALV_CAT1-COLTEXT ='ShipmentNo.'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
WA_ALV_CAT1-FIELDNAME = 'ERDAT'(003).
WA_ALV_CAT1-COL_POS = 2.
WA_ALV_CAT1-COLTEXT ='Creation_Date.'(005).
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
Create field catalog for each of VHILM
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
IF G_VAR >= 1.
CONDENSE WA_ITAB4-VHILM NO-GAPS.
WA_ALV_CAT1-FIELDNAME = WA_ITAB4-VHILM. "l_fieldname.
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = WA_ITAB4-VHILM.
WA_ALV_CAT1-JUST = C_CENTER. "'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
L_I = L_I + 1.
ENDIF.
*TOTAL-last column in the field catalog
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
SORT L_ALV_CAT1_TAB BY FIELDNAME.
*Non of the field name should not get repeated
DELETE ADJACENT DUPLICATES FROM L_ALV_CAT1_TAB.
ENDLOOP.
SORT L_ALV_CAT1_TAB BY COL_POS.
*Creating Dynamic Internal table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = L_ALV_CAT1_TAB
IMPORTING
EP_TABLE = L_REF.
Assigning the Dynamic field Catalog to field symbol.
ASSIGN L_REF->* TO <F_FS>.
CREATE DATA G_WA LIKE LINE OF <F_FS>.
ASSIGN G_WA->* TO <F_WA>.
DELETE ADJACENT DUPLICATES FROM <F_FS> COMPARING ALL FIELDS.
ENDFORM. " get_fieldcat
*& Form display_data
FORM GET_FINAL_DATA.
*variable declaration
DATA: L_TOTAL TYPE I, " Row wise total
L_FILL TYPE I, " Count
L_TOT TYPE I. " Grand total
*To get the TOTAL qunatity in the last line of out put.
LOOP AT G_ITAB6_TAB.
CLEAR WA_ITAB5.
WA_ITAB5-TKNUM = 'TOTAL'(004).
WA_ITAB5-ERDAT = SPACE.
MOVE-CORRESPONDING G_ITAB6_TAB TO WA_ITAB5 .
LOOP AT G_SCANDATA_COUNT_TAB WHERE VHILM = G_ITAB6_TAB-VHILM.
WA_ITAB5-COUNT = WA_ITAB5-COUNT + G_SCANDATA_COUNT_TAB-COUNT.
ENDLOOP.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
CLEAR WA_ITAB5.
ENDLOOP.
DESCRIBE TABLE G_ITAB5_TAB LINES L_TOT.
*>>>>>>>>
****To get total qunatity of all TKNUM
LOOP AT G_TOTAL_TAB .
L_TOTAL = L_TOTAL + G_TOTAL_TAB-QUANTITY.
ENDLOOP.
*>>>>>>>>
*To assign ERDAT to g_itab5_tab
LOOP AT G_ITAB5_TAB INTO WA_ITAB5 .
READ TABLE G_VTTK_TAB INTO WA_VTTK WITH KEY TKNUM = WA_ITAB5-TKNUM.
IF SY-SUBRC = 0.
WA_ITAB5-ERDAT = WA_VTTK-ERDAT.
MODIFY G_ITAB5_TAB FROM WA_ITAB5 TRANSPORTING ERDAT.
ENDIF.
ENDLOOP.
*Assigning value in each field to respective Field symbols.
LOOP AT G_ITAB5_TAB ASSIGNING <F_FS2>.
CLEAR G_TOTAL_TAB-QUANTITY.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_FS2> TO <F_FS6>.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_WA> TO <F_FS7>.
<F_FS7> = <F_FS6>.
CONDENSE <F_FS2>-VHILM NO-GAPS.
ASSIGN COMPONENT 'VHILM' OF STRUCTURE <F_FS2> TO <F_FS3>.
ASSIGN COMPONENT 5 OF STRUCTURE <F_FS2> TO <F_FS4>.
MOVE <F_FS3> TO G_VAR1.
ASSIGN COMPONENT G_VAR1 OF STRUCTURE <F_WA> TO <F_FS5>.
<F_FS5> = <F_FS4>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_FS2> TO <F_FS16>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_WA> TO <F_FS15>.
WRITE <F_FS16> TO <F_FS15> .
Inorder not to display the date '00/00/000',
if there is no DATE .
IF ( <F_FS15> CP '00/*' )
OR ( <F_FS15> CP '00.*' )
OR ( <F_FS15> CP '00-*' ).
<F_FS15> = SPACE.
ELSEIF ( <F_FS15> CO ' / /' )
OR ( <F_FS15> CO ' . .' )
OR ( <F_FS15> CO ' - -' ) .
<F_FS15> = SPACE.
ENDIF.
READ TABLE G_TOTAL_TAB WITH KEY TKNUM = <F_FS6>.
IF SY-SUBRC = 0.
ASSIGN G_TOTAL_TAB-QUANTITY TO <F_FS12>.
ASSIGN COMPONENT 'COUNT' OF STRUCTURE <F_FS2> TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS13> + <F_FS12>.
L_TOTAL = L_TOTAL + <F_FS12>.
ENDIF.
L_FILL = L_FILL + 1.
IF L_FILL = L_TOT.
ASSIGN L_TOTAL TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS12>.
ENDIF.
AT END OF <F_FS2>-TKNUM.
APPEND <F_WA> TO <F_FS>.
CLEAR <F_WA>.
ENDAT.
ENDLOOP.
CLEAR: <F_FS6>,
<F_FS7>,
<F_WA>.
*Call the screen where Custom container is defined
CALL SCREEN 0100.
ENDFORM. " display_data
Regards
Kannaiah -
Dynamic Alv for Dynamic Internal Table
Hi All,
I am new for abap dynpro.
How can i create a dynamic alv table in abap dynpro withoud ddic structure??
My requirement is as follows:
I have a table having some field e.g MATNR WERKS NETWR.
I want to pivot data werks and to display in webdynpro alv.
Thnx:
N. N. TiwariYou can use the RTTI to build up a dynamic structure in memory:
Something like this - where both the data and its structure and meta data all come from an external source (which happens to be MDM in this case):
****ALV
data:
rootnode_info type ref to if_wd_context_node_info,
dyn_node type ref to if_wd_context_node,
dyn_node_info type ref to if_wd_context_node_info,
tabname_node type ref to if_wd_context_node,
current_tablename type string,
tablename type string,
struct_type type ref to cl_abap_structdescr,
table_type type ref to cl_abap_tabledescr,
comp_tab type cl_abap_structdescr=>component_table,
comp like line of comp_tab,
my_table type ref to data,
my_row type ref to data.
field-symbols: <table> type table,
<row> type data,
<f> type any,
<wa_string> type string,
<wa_date_time> type mdm_cdt_date_time,
<wa_integer> type mdm_gdt_integervalue.
rootnode_info = wd_context->get_node_info( ).
* create subnode_info
try.
rootnode_info->remove_child_node( 'MDM_DATA' ).
catch cx_wd_context.
endtry.
field-symbols <wa_detail> like line of field_details.
field-symbols <wa_result> like line of result_set.
field-symbols <wa_pair> type mdm_name_value_pair.
read table result_set assigning <wa_result> index 1.
loop at field_details assigning <wa_detail>.
* build a structure description from the list of single fields
if strlen( <wa_detail>-field_code ) > 30.
comp-name = <wa_detail>-field_code+0(30).
else.
comp-name = <wa_detail>-field_code.
endif.
if <wa_result> is assigned.
read table <wa_result>-name_value_pairs assigning <wa_pair>
with key code = <wa_detail>-field_code.
if sy-subrc = 0.
case <wa_pair>-type.
when `MDM_CDT_DATE_TIME`.
comp-type ?= cl_abap_datadescr=>describe_by_name( 'TZNTSTMPL' ).
when `MDM_GDT_INTEGERVALUE`.
if <wa_detail>-field_lookup_table is not initial.
comp-type ?= cl_abap_datadescr=>describe_by_name( 'STRING' ).
else.
comp-type ?= cl_abap_datadescr=>describe_by_name( 'INT4' ).
endif.
when others.
comp-type ?= cl_abap_datadescr=>describe_by_name( <wa_pair>-type ).
endcase.
else.
comp-type ?= cl_abap_datadescr=>describe_by_name( 'STRING' ).
endif.
else.
comp-type ?= cl_abap_datadescr=>describe_by_name( 'STRING' ).
endif.
append comp to comp_tab.
endloop.
struct_type = cl_abap_structdescr=>create( comp_tab ).
dyn_node_info = rootnode_info->add_new_child_node(
name = 'MDM_DATA'
is_mandatory = abap_false
is_mandatory_selection = abap_false
static_element_rtti = struct_type
is_multiple = abap_true
is_static = abap_false ).
* get instance of new node
dyn_node = wd_context->get_child_node( name = 'MDM_DATA' ).
****Process Table Data
data content_string type string.
data l_tabix type sytabix.
table_type = cl_abap_tabledescr=>create( p_line_type = struct_type ).
create data my_table type handle table_type.
assign my_table->* to <table>.
loop at result_set assigning <wa_result>.
create data my_row type handle struct_type.
assign my_row->* to <row>.
loop at field_details assigning <wa_detail>.
l_tabix = sy-tabix.
read table <wa_result>-name_value_pairs assigning <wa_pair>
with key code = <wa_detail>-field_code.
* loop at <wa_result>-name_value_pairs assigning <wa_pair>.
if sy-subrc = 0 and <wa_pair>-value is not initial.
assign component l_tabix of structure <row> to <f>.
* READ TABLE field_details ASSIGNING <wa_detail> INDEX sy-tabix.
case <wa_pair>-type.
when 'STRING'.
assign <wa_pair>-value->* to <wa_string>.
if <wa_string> is assigned.
* DATA: int TYPE i VALUE 258.
* DATA: buffer TYPE xstring,
* text_buffer TYPE string,
* conv TYPE REF TO cl_abap_conv_out_ce.
* conv = cl_abap_conv_out_ce=>create(
* encoding = 'UTF-8'
* endian = 'L' ).
* CALL METHOD conv->write( data = <wa_string> ).
* buffer = conv->get_buffer( ).
* DATA: convin TYPE REF TO cl_abap_conv_in_ce.
* CALL METHOD cl_abap_conv_in_ce=>create
* EXPORTING
* input = buffer
* RECEIVING
* conv = convin.
* CALL METHOD convin->read
* IMPORTING
* data = text_buffer.
* MOVE text_buffer TO <f>.
move <wa_string> to <f>.
endif.
when 'MDM_CDT_DATE_TIME'.
assign <wa_pair>-value->* to <wa_date_time>.
if <wa_date_time> is assigned.
move <wa_date_time>-content to <f>.
endif.
when 'MDM_GDT_INTEGERVALUE'.
assign <wa_pair>-value->* to <wa_integer>.
if <wa_integer> is assigned.
if <wa_detail>-field_lookup_table is not initial.
content_string = wd_assist->perform_value_lookup(
i_lookup_table = <wa_detail>-field_lookup_table
i_lookup_key = <wa_integer> ).
move content_string to <f>.
else.
move <wa_integer> to <f>.
endif.
endif.
endcase.
endif.
endloop.
append <row> to <table>.
endloop.
dyn_node->bind_table( <table> ).
* Connect to the component Usage of the ALV
data: l_ref_cmp_usage type ref to if_wd_component_usage.
l_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
l_ref_cmp_usage->create_component( ).
endif.
* Through the interface controller of the ALV Component set the DATA node dynamically
data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
l_ref_interfacecontroller->set_data(
r_node_data = dyn_node ).
data alv_model type ref to cl_salv_wd_config_table.
alv_model = l_ref_interfacecontroller->get_model( ).
data columns type salv_wd_t_column_ref.
field-symbols <wa_column> like line of columns.
columns = alv_model->if_salv_wd_column_settings~get_columns( ).
data column_id type string.
data header type ref to cl_salv_wd_column_header.
data l_text type string.
loop at field_details assigning <wa_detail>.
* build a structure description from the list of single fields
if strlen( <wa_detail>-field_code ) > 30.
column_id = <wa_detail>-field_code+0(30).
else.
column_id = <wa_detail>-field_code.
endif.
translate column_id to upper case.
read table columns assigning <wa_column> with table key id = column_id.
if sy-subrc = 0.
header = <wa_column>-r_column->get_header( ).
header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none ).
* if <wa_detail>-field_lookup_table is initial.
header->set_text( <wa_detail>-field_name1 ).
* else.
* l_text = wd_assist->read_table_desc_for_lookup( <wa_detail>-field_lookup_table ).
* header->set_text( l_text ).
* endif.
endif.
endloop.
catch cx_root into o_except.
data: l_current_controller type ref to if_wd_controller,
l_message_manager type ref to if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
l_message_manager = l_current_controller->get_message_manager( ).
l_message_manager->report_exception(
message_object = o_except ).
endtry. -
Create dynamic internal table with deep structure;cell coloring dynamic ALV
Hi,
My requirement is to do cell colouring for a dynamic ALV.
So I am creating a dynamic internal table using the following method.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fieldcatalog[]
IMPORTING
ep_table = i_output.
But how do I define field COLORS which should be again an internal table ?
Is there any other way for cell colouring?
Putting my problem in another way:
How do I create a dynamic internal table with one field as another internal table.
Quick replies are highly appreciated.
Thanks,
Nisha Vengal.halo Nisha
Before building the display table . you can add the field in the feild catalog right . This display table gets generated from the field catalog right
1 Create a global structute say ZEXTEND_FIELDCAT
2 Have fields like STYLE type lvc_t_styl
COLOR type LVC_T_SCOL.
3 Now you have to extend ur fieldcatalog
l_fieldcat-fieldname = COLOR'.
l_fieldcat-ref_field = 'COLOR'.
l_fieldcat-ref_table = 'ZEXTEND_FIELDCAT'.
APPEND l_fieldcat TO lt_field_catalog.
CLEAR l_fieldcat.
Maybe you are looking for
-
How to call PL/SQL procedure from Jdeveloper
hai i am using JDeveloper 10g version 10.1.3. i am working on Web Application[JSF,ADF BC]. i had commit button in one form. when i click that button a PL/SQL procedure can be invoked.( the procedure is to check for primary key) how to do this thanks
-
Hi Everyone, We are working on MDM 7.1 and we have 3 different main tables. We have a scenario to import relationships between different remote systems. The records from both the remote systems are maintained as company. But we are trying to import
-
Can't find my custom loop, can't Save as archive, but the song plays?
Hey guys. In October I made my first "real" attempt at a song in GarageBand. I recorded the bass and guitar with my Digitech GNX3000. I made my drum loops from scratch with my mouse. I just chose the kit and clicked the little squares on the grid for
-
Saving scan to desk top using mac OS 10.9
Just want to thank the HP employee who provided instructions on how to save the scan to the desk top without getting an all gray or black image. This question was solved. View Solution.
-
Now that Avvenu has sold off to Nokia and has been sunsetted what am I supposed to use now? Avvenu did exactly what I wanted. Win-Hand is incompatible with my firewall. The firewall vpn client does not support Palm. I do not want to put files up