Dynamic disk mess up with bootcamp!!! convert to basic--HELP!!!

Okay here is the thing. I messed up in my bootcamp parition and made my mac's hard disk dynamic! I cannot boot into either OS.. I have a linux mint USB drive that I booted to and tried to use testdisk but couldn't figure it out!!! I need help how to recover my OS X parition or recovery parition. I have all my important files saved on a time machine back up, so I don't care if I lose everything as long as I get my Mac OS X recovery parition and main parition back!!! It is less then a year sense I bought my mac mini so does warrenty cover this if I take it into the apple store? if I take it into the apple store can they reset my hard drive to factory setting? if it isn't covered how much will it cost? And lastly do you know anyway to fix it without losing data?

Alright I sloved it. Here is the answer to this problem, boot from a time machine back up and use disk utlity to wipe the HDD and make it a GUID parition. Then reinstall OS X. After OS X is intalled you can restore all your files and settings by booting from the time machine back up again.  The reinstall will make the recovery parition!

Similar Messages

  • Mavericks is messing up with Book Antiqua fonts. Help!

    I bought a new Macbook pro with Mavericks installed.
    All our documents use the Book Antiqua font.
    But the new OS screws up all Book Antiqua font. Either it makes it unreadable (see below) or difficult to read.
    Any way to solve this huge problem?
    Thanks for your help.
    Frederic

    I have this issue too. I thought It was caused due to the actualization of Mavericks and the of Pages 5.0, so I performed a clean install triying to solve it, but it didn't. I haven't installed the Microsoft suite (that brings Book Antiqua into the system. The weird thing is that I can open a document in Pages 4.3 written with Book Antiqua, and it shows! (but messed up). If I try to select the text, it shows a blank field in the font name, and Book Antiqua is not available in my font list. I downloaded again the font and installed it. The name in the list came back, but the text is still messed up. I have another Mac, with Mavericks, with Pages 4.3, Pages 5.0, the Microsoft suite and the font works right. So, is a deep mistery to me. Now, I'm triying to find a substitute, and no: Times is not the same.  :-(

  • Unable to instal Win 8 on iMac with Bootcamp & Win 7. Help please.

    Unable to install windows 8 on my imac with boot camp running Win 7. Instal gets reset to windows 7 with error message "unable to instal Win 8"

    V
    You need to go to the computer maker and get a copy of the OEM for your system.  YOu cannot download a non OEM and repair "it" with the OEM CD'S.  The cd's are probably for repair not install.  Does your system have a restore partition?
    Wanikiya and Dyami--Team Zigzag

  • Issues with bootcamp partition. Please help!

    So I got the error that some files could not be moved when I tried partitioning my harddrive. I downloaded SuperDuper! and copied my disk to an external 500gb hard drive. I reformated my disk and my drive to Mac OS X Extended (Journaled). I felt confident that I had it, but upon partitioning my disk again I read the same error. What do I do? I read in another topic that I need to restore my disk once I back it up, but what do I set as source and destination? Help in concise, easy to understand directions would be greatly appreciated.

    You replied to yourself, so I guess that means you didn't read or digest, or perhaps look at the pdf manual for SuperDuper.
    A basic understanding of repairing a system, any system.
    Or clone from A to B, reformat, and clone back from B to A.
    In between, it is a good idea to do some maintenance.
    Invest in some other tools.
    I threw in some of the things you can do to make upgrades and backups more useful and better.
    The basics of how to test a system for and resolve problems.
    http://support.intel.com/support/motherboards/server/sb/CS-029657.htm
    Permissions (which are at the bottom of useful things to know and do)
    http://support.apple.com/kb/HT2963?viewlocale=en_US
    http://support.apple.com/kb/TS1541
    Apple Disk Utility also has ability to Restore. Click on Restore tab. Also, pull down Help menu, type in a couple words, there really is online built in help.
    Maybe time for a book on computer maintenance and repair, David Pogue's Missing Manual is highly rated.
    http://books.slashdot.org/books/08/02/27/1551206.shtml
    http://www.macfixit.com/staticpages/index.php?page=20031209121115375

  • HP m6 notebook Dynamic disk - difficult to make a backup image

    Hi, my 6month old m6 died (corrupt boot record and/or partiton table). I had to restore from my pile of 5 DVDs (worked!).
    Whilst I have a data backup strategy I'd like to be able to image the disk (or just system and C: partitions) to enable faster recovery.
      The problem is many (all?) imagaing software only appears to work with Basic disks.  So my questions are,
    1. why does HP give us a Dynamic disk
    2. can I easily convert to Basic disk  to make disk imaging easier.  Thanks.

    Are you sure that you didn't change the partition(volume) type to dynamic yourself?
    Each one of the HP loaners I have had have arrived with the partition types set as Basic. When I use the recovery manager to experiment with the product, each time it returns the deleted volumes to basic, not dynamic.
    Converting a volume from dynamic to basic will wipe the data. That is why it recommended to back up the data before converting the volume.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Dynamic Disks

    I need some clarification on dynamic disks.  I'll break it down to a few questions:
    Can dynamic disks be used with an MBR partition style?  How many partitions can be created this way?
    Can a dynamic disk be a boot or system partition?  If so can it be extended to a spanned or stripe volume?
    Thanks for your help.
    Michael T. Glenn

    Hi Michael,
    Dynamic disk could be used as an MBR partition.
    Also it could be  boot or system partition. I saw (and tried) to install system on a mirror volume. However it need to be done before installing system. So we cannot extended to a spanned or stripe volume after - we need to rebuild a larger
    volume.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT1583 What blank DVD disks are compatible with burning a film from Idvd on an applemac?

    I have just finalized a project in imovie and this message came up on the screen - "Your project exceeds the maximum duration. To burn your DVD, change the encoder setting in the project info window".
    I have changed the encoder setting from best fit to Professional but I am having burning the film to a dvd. The computer tells me to load a dvd or my driver is busy - which it isn't it only has a blank dvd disk in it. So I was wondering whether my DVD disks are compatible with the applemac computer!
    HELP!

    Hi
    So I was wondering whether my DVD disks are compatible with the applemac computer!
    And if You tell - what brand and type You are trying to use - I will be so much easier !
    But most often the problem is
    • Do NOT - insert the DVD disk before iDVD specifically as You to do this. As Desktop will catch it and try to format it as a Data-DVD - Not what You want (a Video-DVD) as Data-DVD can not be played on standard DVD-players.
    To get it even better I do
    • Use Verbatim - Never Memorex or NoName etc cheap brands (as they don't work OK for Me)
    • DVD-R - as they play on even older DVD-players
    • Burn Speed - set down to x2 or x4 MAX ! - Best IS NOT BEST at all here !
    Yours Bengt W

  • How to convert dynamic disk into basic, with OS installed in C drive????

    Hi,
    I want to convert all volumes of my current hard drive (which includes OS installed in it) into basic from dynamic. 
    I read the tutorial of microsoft, in which they said that delete all volumes one by one and then finally convert the disk into basic.
    So I deleted 2 volumes, but OS did not let me delete C drive, as windows 8 was installed in it.
    So now how to convert my hard disk into basic disk from dynamic disk???

    Hi,
    I want to convert all volumes of my current hard drive (which includes OS installed in it) into basic from dynamic. 
    I read the tutorial of microsoft, in which they said that delete all volumes one by one and then finally convert the disk into basic.
    So I deleted 2 volumes, but OS did not let me delete C drive, as windows 8 was installed in it.
    So now how to convert my hard disk into basic disk from dynamic disk???
    find another hard disk, backup and wipe the old disk, then use windows to make sure any partitions remaining are gone
    windows will automatically allocate the disk as required on a new install
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • Windows 2008 R2, converting to dynamic disk questions

    Hello,
       I have a Windows 2008 R2 server and I want to convert the drive into a dynamic disk for mirroring.  The disk currently is divided into two partitions.  The C: partition which is System,Boot, Page File, etc. and the D: partition which
    is data.  The questions I have are:
        Can a disk with multiple partitions be created without data loss or anything?
        I know you have to reboot, but how long does it usually take to do the reboot/conversion before the server is back up? 
        I want to mirror the drive to a 2nd identical disk in the server, and am planning to use Computer Management.  Do I have to partition the second drive first, or will the process do it automatically?
        The server is a dedicated server that is provided by a hosting company, so I would be doing it through Remote Desktop.  Can it be done that way?
    Thanks.

    Hi,
    You can convert the drive into a dynamic disk within both local logon session and remote desktop session. The system requires reboot twice to make the conversion take into effect. You do not have to partition the second drive.
    For more detailed information, please refer to the articles below:
    Dynamic disks and volumes
    http://technet.microsoft.com/en-us/library/cc757696(v=ws.10).aspx
    Create and test a mirrored system or boot volume
    http://technet.microsoft.com/en-us/library/cc738132(v=ws.10).aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I need convert dynamic disk to basic

    
    I screwed up my hard drive using Disk Management in Windows 7 because i accidentally converted my entire hard drive basic to dynamic. I tried tweaking it around to regain the Basic state, but failed.
    Now I can't even boot Windows. Is there a way for me to delete the entire dynamic disk, convert to basic, and start over with the Windows installation in DOS mode?

    Sure, boot on your windows 7 media.
    When it comes to the screen where you can chose which disk to install to, press shift + F10 to get a commando prompt.
    In the commando prompt type diskpart
    in diskpart do the following:
    1. Type "List disk" All disk on your machine will get listed and have a number.
    2. Remember the disk number of the disk
    3. Type "Select Disk x" where x is the number of the disk
    4. Type "Clean" this will ERASE the disk
    5. Type " Create partition pri"
    6. Type "Format fs=NTFS Quick"
    7. Type "Active"
    Now you can Close the commando prompt and do a refresh on the disk selection page and chose the disk to install Windows 7 to.

  • Convert Dynamic Disk to Basic Disk Witout Data Loss

    I think I goofed somewhere and am in need of some advice.
    This Windows 8.1 home server had two identical 160GB drives that at one point were mirrored.  One of the drives failed but so I added a larger replacement hard drive (Disk 0 = 160GB, Disk 1 = 250GB) and was able to recover.  However now, not only
    is the mirror broken, but the configuration is crazy:
    Disk 0 contains 1 100MB System Reserved Parttion (System)
    Disk 1 contains 1 120GB partition where the OS is installed (Boot, Page File, Crash Dump)
    Since its much quicker to move 100MB vs 120GB, I was thinking I'd copy the 'System Reserved' partition on Disk 0 to Disk 1 using a third-party utility, but because both disks are Dynamic Disks, this isn't possible.
    So at this point I can only think of two options:
    Recreate the 'System Reserved' partition on Disk 1 (Is it as easy as running bootrec /scanos or /rebuildbcd or /fixmbr or /fixboot?) > Wipe Disk 0 > Confirm Windows 8.1 boots > Then create a new mirrored volume on Disk 0
    Mirror Partition 1 (120GB) on Disk 1 (where Windows is installed) to the available space (149GB) on Disk 0 > Break the mirror > Wipe Disk 0 > Confirm Windows 8.1 boots (maybe I'll need to run bootrec with some switch here?) > Then create a new
    mirrored volume on Disk 1
    Thoughts?

    See:
    How to Convert Dynamic Disk to Basic Disk without Data Loss?
    Carey Frisch
    Thanks for the reply.
    I've seen that post, among others, and they all require buying an application.  None of the product pages, like the one you linked indicate that a purchase is required.  It wasn't until I downloaded the aplications, (and I've tried several) that
    I discovered a purchase was required.  Really disappointed they weren't upfront about that on the guides.
    So maybe a different approach can be taken:
    Disk 1 just contains the System Recovery partition - the rest of the disk is blank (not partitioned)
    Create a new partition
    Copy the OS data from Disk 2 to Disk 1
    Update the System Recovery and/or the Boot Configuration Data file to point to the OS that's now on Disk 1
    Once updated, reboot
    The system should boot properly from Disk 1 and the OS should also be running from Disk 1
    Convert Disk 2 to a basic disk
    Once Disk 2 has been converted back to a basic disk, can I just do the opposite?
    Create 2 partitions on Disk 2: one for System recovery and another for OS
    Copy the System Recovery partition (partition on Disk 1) to partition 1 of Disk 2
    Copy the OS partition (partition 2 on Disk 1) to partition 2 of Disk 2
    Update the System Recovery and/or the Boot Configuration Data file to point to the OS that's now on Disk 2
    Once updated, reboot, the system should boot properly from Disk 2 and the OS should also be running from Disk 2
    Convert Disk 1 to a basic disk
    This is bonkers, believe me, but I feel silly shelling out $40-$50 for a single feature of an application.  If I were going to use it regularly, or even periodically, I would do it.
    I'm not very comfortable with bcdedit and bootrec so I need a little help with steps 4 in both sections.

  • How do I convert a dynamic disk back to a basic disk (how do i back up a dynamic disk)

    Hi
    I have "accidently" converted an internal disk to dynamic and cannot see any of my data. I want to see the data. I presume I need to convert it back to a basic disk?
    on this forum and others the solution seems to be back the data on the dynamic disk up, convert it back to basic and restore the data after. Yet, the only place I can see any signs of the disk is within disk managment.
    If I run Backup it dosen't see the disk.
    any suggestions would be gratefully received!
    I am running Win7 home dual boot with WinXp pro
    Thanks, Jason

    Hi,
    you must backup all data and delete the volumes on it:
    How to Convert a Dynamic Disk to a Basic Disk
    To change a dynamic disk back to a basic disk:
    Back up all the data on all the volumes on the disk you want to convert to a basic disk.
    Log on as Administrator or as a member of the Administrators group.
    Click Start , and then click Control Panel .
    Click Performance and Maintenance , click Administrative Tools , and then double-click
    Computer Management .
    In the left pane, click Disk Management .
    Right-click a volume on the dynamic disk that you want to change to a basic disk, and then click
    Delete Volume .
    Click Yes when you are prompted to delete the volume.
    Repeat steps 4 and 5 for each volume on the dynamic disk.
    After you have deleted all the volumes on the dynamic disk, right-click the dynamic disk that you want to change to a basic disk, and then click
    Convert to Basic Disk .
    NOTE :You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click
    Disk 1 .
    Source:
    http://support.microsoft.com/kb/309044
    http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
    The same applies to Windows 7.
    André
    "A programmer is just a tool which converts caffeine into code"
    Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

  • Installing windows 7 with bootcamp on mac pro yosemite 10.10: 'your disk could not be partitioned'

    I have been trying to no avail to install windows 7 on my new macbook pro
    with bootcamp in yosemite 10.10
    i continually get the message  'your disk could not be partitioned', does anyone know how to tackle this? *I am including the screenshot
    and when i try to partition my 250GB drive giving 80GB to the windows partition it just errors,
    i have tried rebooting and verifying my disk and repairing and there's no progress or change.. any ideas would be greatly appreciated

    Hi nicoczyz,
    Welcome to the Support Communities!  The steps you have taken to troubleshoot the issue of not being able to create a Windows partition are good ones.  The resource below provides another possible scenario that may be the issue here.  It's not the exact error message as your screen shot and the article references Windows 8, but the troubleshooting steps are still relevant:
    Boot Camp: Partition alert message when using Boot Camp Assistant - Apple Support
    http://support.apple.com/en-us/HT203913
    This symptom may occur if you have partitions on your startup drive in addition to the following:
    one OS X partition
    one Boot Camp partition
    one OS X Recovery partition (normally not visible in Disk Utility)
    If Boot Camp Assistant detects a Microsoft Reserved (MSR) or Windows Recovery partition on your hard drive, you may see this message.  The Boot Camp Assistant cannot continue until the extra partition is removed.
    Microsoft Reserved and Windows Recovery partitions can be identified as unmounted partitions with the name "disk0s3" or "disk0s5" in Disk Utility. To remove these partitions, use OS X Disk Utility.
    Important: Deleting the wrong partition can cause data loss. Be sure to back up both your OS X files and Windows files before attempting this procedure.
    Open Disk Utility from the Utilities folder.
    Click the Partition tab.
    Look for an extra partition named “disk0s3" or “disk0s5”. Select this partition so it is highlighted.
    Click the Remove Partition button ( - ).
    Make sure the partition you selected is noted in the sheet that appears.
    Click Remove.
    When Disk Utility finishes, close the Disk Utility window to quit the app. The Boot Camp Assistant can now be used to reinstall or update your existing Windows partition.
    Set up a Windows partition on your Mac - Apple Support
    http://support.apple.com/en-us/HT204009
    Before you can install Windows your Mac, you need to create and then format a Windows partition.
    Setting up a Windows partition is one of the steps for installing Windows on your Mac. Use Boot Camp Assistant to create the partition, then use the Windows installer to format it.Create the Windows partition
    To create the Windows partition, open Boot Camp Assistant and follow the onscreen instructions. Boot Camp Assistant is in the Utilities folder of your Applications folder. 
    Use only Boot Camp Assistant to create the partition. If you partition with another app and then use Boot Camp Assistant, the drive with the partition could be erased.
    Boot Camp Assistant creates the partition only if the drive is formatted as Mac OS Extended (Journaled) and doesn't already have a partition created by Boot Camp Assistant. If Boot Camp Assistant sees other partitions, it may warn you that the startup disk cannot be partitioned.
    If you need help determining the best size of the partition, refer to your Windows documentation. For Windows 8, the partition should be at least 30 GB. 
    If Boot Camp Assistant says that verification failed, repair the drive using Disk Utility. If that doesn't help, back up your drive and reinstall OS X.
    The drive you're partitioning must be an internal drive. If you have more than one internal drive and the drive you're partitioning is not in the first drive bay, remove the drives in the lower-numbered bays, then reinstall them after installing Windows. A Fusion Drive is treated as one drive, and the Windows partition is created on the disk drive instead of the flash drive (SSD).
    Format the Windows partition
    Use the Windows installer to format the Windows partition that Boot Camp Assistant created. When you're asked where to install Windows, select the partition named "BOOTCAMP":
    Then click Format to begin formatting the partition using the NTFS file system. If you're installing Windows 7 or Windows 8.0, you won't see the Format option until you click "Drive options (advanced)":
    If the installer says that it couldn't create a new partition or locate an existing one, disconnect any Thunderbolt storage devices connected to your Mac. Reconnect them after installing Windows.
    If you see “No Boot Disk Attached” when starting up your Mac, the Windows partition probably isn't formatted correctly. Remove the partition, then repeat the previous steps for creating and formatting the partition.
    Modify the Windows partition
    Remove the partition, change its size, or change its name.
    Remove the partition
    Use Boot Camp Assistant to safely remove Windows and the Windows partition from your Mac, restoring your startup drive to a single Mac partition. You may want to back up your information first, because removing the partition erases all of the data it contains.
    Open Boot Camp Assistant.
    Select “Remove Windows 7 or later version," then click Continue.
    Do one of the following:
    If your Mac has a single internal disk, click Restore.
    If your Mac has multiple internal disks, select the Windows disk, select “Restore disk to a single OS X partition,” then click Continue.
    Change the size of the partition
    It's not possible to change the size of the partition after installing Windows, but you can remove the partition and create a new partition of the correct size. Don't try to resize your partition with Windows or a third-party app.Change the name of the partition
    You can rename the Windows partition from within Windows. For instructions, refer to your Windows documentation.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Dec 22, 2014
    I hope this information helps ....
    - Judy

  • I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

    Here's the story...
    I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
    I decided to reinstall windows.
    I deleted the windows partition using BootCamp.
    Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned  You must have at least 10 GB of free space available"
    After reading several posts on this forum I decided to defrag the hard drive and try again. 
    The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
    Any suggestions?
    Also, I tried repair disk and repair permissions
    Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)"  Could the 32-bit requirement be an issue? Is lion 64-bit?

    Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

  • HT3777 if i restore my macbook back to its factory settings with the grey install disk that came with my macbook, will this wipe out the bootcamp partition? (i don't want it to)

    i have asked this question a few times now, but i have not got the answer i was looking for:
    my macbook is currently on v10.6.8 (a snow leopard version)
    the factory settings of my macbook is v10.5.6 (a leopard version; i know that using the grey install disk that came with my macbook will restore my macbook back to this version)
    i know that by restoring my macbook to the factory settings, some apps will go (e.g. flash player 12, app store) and other apps will be downgraded (like itunes)
    but i am talking about BOOTCAMP. it isn't an app, it's a partition of my hard drive.
    my question is, will i still have the BOOTCAMP partition after i restore my macbook back to its factory settings? if so, will all the folders and files in BOOTCAMP still be there?

    Hello there, Timmayy24.
    The following Knowledge Base article provides the information you're looking for:
    Mac OS X v10.6 Snow Leopard: How to Erase and Install
    http://support.apple.com/kb/HT3910
    Important: This procedure will completely erase your hard drive. If you have installed Microsoft Windows using Boot Camp, or have multiple partitions, this procedure will erase the partition you select.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for