Dynamic menus are overlapping. Help needed.

Hi guys,
please help, otherwise I'm going to hammer my head.
Dynamic menus are overlapping under in the Main menu > Pearl Academy (here is the site: http://lopearls.businesscatalyst.com/ )
I really don't know how to fix it. Please help.

You gotta change the CSS mate.
try to give the display of inline-block to your top level lists or display:block and then float them left.
Second everytime I'm in a certain page, the link related to that page somehow generates this:
<li class> <a ....>text ....
why do you have an empty class in there? check the Menu module files and see what you've got there to fix that, you shouldn't have that. maybe some JS is messing with you too.
Assign classes through BC, or just target the lists directly with CSS.
If you want to be specific on what list you target, use this method:
#nav > ul
and then #nav > ul > li
this will target only the direct tag after the nav div.
man you got a lot going on there, this need a bit of clean up.
I can tell you that it takes a good chunk of CSS lines to control what you've got there.

Similar Messages

Sql query to dynamically filter out records -help needed

Hi ,
I have a table with structure as below
Create table T1
(ID Number(5),
Action Varchar2(20)
Below are the table contents at differnt points in time and please help me with a query which should show the results as per the entries in the table dynamically.
Initail Table contents
1 Queued
2 Queued
Query Result should be
1 Queued
2 Queued
After an insert the Table contents
1 Queued
2 Queued
3 Ignored
Result
Nothing should be displayed
After an insert the Table contents
1 Queued
2 Queued
3 Ignored
4 Ignored
Result
Nothing should be displayed
After an insert the Table contents
1 Queued
2 Queued
3 Ignored
4 Ignored
5 Queued
Result
5 Queued
Thanks in advance!!
Best Regards,
Sridhar

Hi, Sridhar,
So, you want to display rows from t1 that come after the last row with action='Ignored', which means no output at all when the last row has action='Ignored'. (A row with a given id is considered to be "after" a row with a lower id. The row with the highest id is considered the "last" row.)
Is that right?
Here's one way:
SELECT     *
FROM     t1
WHERE     id > (
          SELECT MAX (id)
          FROM     t1
          WHERE     action     = 'Ignored'
;This does not assume that id is consecutive integers.
If id is not unique, what results do you want? There's a chance that the query above already does it; if not, it can probably be modified.

Dynamic Table with NavBar Help Needed

If I use this query:
SELECT cemeteries.lname, cemeteries.fname, cemeteries.born,
cemeteries.died, cemeteries.buried
FROM cemeteries
WHERE (cemeteries.lname LIKE varLname%)
the NavBar works perfectly and I can page through the record
set
but when change to a more complex WHERE statement:
SELECT cemeteries.lname, cemeteries.fname, cemeteries.born,
cemeteries.died, cemeteries.buried
FROM cemeteries
WHERE (cemeteries.lname LIKE varLname% AND cemeteries.fname
LIKE varFname%)
I get the first page of results, but when I click next, I get
nothing and if I try to go back, I get the default query.
What am I doing wrong?

solved the problem, instead on change event put script on exit event.
and the following line does the trick:
xfa.resolveNode("THatchPatterns.Section[" + this.parent.index + "]").CCode.rawValue = this.rawValue

More info needed on BC Dynamic menus and using CSS with them

Hi all,
The BC Gurus tutorial on Dynamic Menus and how to style them with CSS made no sense to me, unfortunately. The presentation was too rushed and the screen too small to see what was happening.
In a previous question I found out how to apply CSS classes to BC menus after a bit of a run around.
I was putting the # in front of the Item ID name and a . in front of the class name and this was not necessary.
I have further questions though, as I am still struggling to get a BC Dynamic menu to style properly with the CSS I have created.
1. If you choose CSS as the menu type, can you set the font, background colour and rollover state of the menu items in the Dynamic menu section? Or do you have to style it all in the CSS stylesheet?
2. If you choose CSS as the menu type, the option to say how the submenu sits under the root menu disappears. So do you need to set this in the CSS stylesheet? And if so in which element? UL or LI?
3. If you choose CSS/HTML only, how is this different to the option of CSS for the dynamic menu?
4. If you choose CSS as the menu type and if you set a width and height in the menu item, and then set a different width and height in the CSS stylesheet, which width and height wins?
5. If you want a dynamic menu to show on an Android phone, do you have to choose CSS/HTML only and do all the styling in the CSS stylesheet? Or should you avoid dynamic menus all together and just use a UL list in the template? (I am doing a responsive fluid grid layout in DW for the template).
6. I am finding that the dynamic menu I have done, with CSS as the type, does not show and hide the sub menu items properly on an Android phone. Is there a problem with the javascript in Dynamic menus?
Thanks for any help you folks can give on these questions!

.pacnew files are only created if you have modified the default (or a change has been made to the config upstream); in both cases, you should be looking to incorporate the changes.
It seems some new options are being shipped with lxdm: you want those in your config (turning them on or off is a matter for you and the man page to sort out)...

Horizontal Spry Menus are not showing up in ANY browser HELP!

www.tvnewsjunkie.com
I am a novice web designer and I need help!
The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side.
HOWEVER, when I click on LIVE VIEW in DreamWeaver everything looks fine.
There should be 7 total menu bars with 7 Dropdown menu options each (except on the bottom menu bar which there will only be 4 I believe)
What am I doing wrong??

Thank you so much for your help!This matter is certainly closed.
I just want to add, however, that somehow my Spry Assets folder was placed somewhere outside of the rest of my files! no wonder I was confused.
Thank you again!
Grant
Date: Fri, 17 Dec 2010 23:43:25 -0700
From: [email protected]
To: [email protected]
Subject: Horizontal Spry Menus are not showing up in ANY browser HELP!
You have forgotten to upload the support files - SpryMenuBar.js and SpryMenuBarHorizontal.css - to the server.
Gramps
>

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I bought an iphone5 from saudi arabia,can i use it in india?is there any requirements i have to take?many one are saying i need to unlock it,please any one help me,i did'nt activate my phone yet.

i bought an iphone5 from saudi arabia,can i use it in india?is there any requirements i have to take?many one are saying i need to unlock it,please any one help me,i did'nt activate my phone yet.

If the phone is unlocked then you can use it in India.
If your phone is locked, then the only way to get the phone unlocked is to contact your phone company/carrier. The person that sold you the phone in Saudi should have told you whether it was locked or unlocked. Contact them to check and then contact the carrier to have it unlocked if it is locked.
Other than that there is not a lot that you can do - perhaps it was unwise to purchase a phone in Saudi - it won't have Facetime on it if you got it there.

How do I activate old version of Photoshop CS3 as it is not supported over the phone and website notes are not helping...? I need a human being to resolve this

I am trying to activate an old version of Adobe Photoshop CS3 but internet activation is not working and the notes on the page online are not helping either. I need a person to assist me.

You need to deal with Adobe for you problem this is an Adobe Photoshop User forum site not part of Adobe support users here do not have access to Adobe activation servers and database. You need to get someone at Adobe to help. Adobe support is not what it should be. Good luck.

Fly out tool menus are not working after latest update-help?!

Attempting to click/hold click is not expanding the tool fly out menus in Illustrator after the latest update. I did discover that alt + left click will rotate tools, but I would still like to be able to access the fly out menus. Any help would be appreciated!

''tenderprey [[#answer-668426|said]]''
<blockquote>
So, it sounds like there's a compatibility problem. I didn't realize that Firefox accesses Silverlight in a whole different way. Do you think Firefox needs to be updated/patched to be able to work with the Silverlight plugin again, or does the plugin need to be updated to be compatible with the latest version of Firefox?
</blockquote>
First of all, I´m not a IT guy...just a fan of "firefox".
Regarding your question, since this issue started with the 34.0.5
version of "firefox" it´s my opinion that it´s "firefox" the one that
should be updated/patched to work again with "netflix".
to fix such issue.

HT4623 need to update Ipad 1 and don't know what to do? Articles are not helping.

need to update Ipad 1 and don't know what to do? articles are not helping.

If your are using IOS 3/4, you need to connect to iTune (computer) to update software
http://support.apple.com/kb/HT4972

How To Use Dynamic Menus To Place Manually Created Jspx Pages On Sub-Level

JHeadstarters,
Back on the JHS trail and could use some help.
I started using dynamic menus (see section 9.2 JHS Dev Guide) to setup a custom menu structure and found it could not be easier however I need to solve 2 issues;
1. How to get more than 2 levels deep on the menus (parent, child, grand-child, etc.)? In the menu structure setup I have created a menu that is 3-levels deep however when it runs you only get 2 levels. Perhaps a template needs to be changed.
2. How can I assign manually created jspx pages to sub-level menus?
Scenerio;
I have JHS generated pages *** AND *** manually created pages. Using dynamic menus to place the JHS genned pages works fine, the problem is how to do it with manually created pages.
Using Dynamic Menu's I created a top-level menu tab named "warp-core", below it on the next level I have two sub-menus, one named "search" and one named "form" for displaying the results of the search and modifying the rows (don't ask me why they are seperate).
The problem is how to assign the manually created jspx pages to those sub-menus? Or am I going abouth this the wrong way? Perhaps I could use JHS to generate seperate search and display pages.
Thanks!
BG...

Bill,
1. Yes, you need to decide yourself how and where you want to render this third level menu. You then create a region file similar to dynamicMenu2Tabs.jspx, just replace the references to level2MenuItems with level3MenuItems. Then create a custom template to call this menu 3 region file.
For example, you could create a bulleted vertical list for level 3 as illustrated in section 9.1.3 of the Developers Guide (that example is with static menu, but you can use similar technique for dynamic menu)
2. Instead of a group name, you can specify a JSF Navigation action in the menu administration application. So, you create a global navigation case to your custom page, and you enter this navigation case id in the menu admin app.
Note that if you want to generate separate search pages, you can do so by setting the advanced search property to "separatePage".
Steven Davelaar,
JHeadstart Team.

Dynamic menus from database with URL parameters

Hello!
I'm trying to build a set of dynamic menus that would be based on data from the database. I need to have a menu item for every database row, and all the items point to the same page, but each with its own parameter in the item's URL. The URLs in the menus would look like ".../form.jspx?recordID=xx", where xx is read from the database.
Right now, I can display the menu, everything works fine, but the problem is in the PageMap section of Databindings.cpx - ADF needs to have every URL mapped to a page definition. So even if I have "form.jspx" mapped to "form_PageDef", I have to explicitly tell the server that "form.jspx?recordID=xx" is also mapped to "form_PageDef" by putting this into Databindings.cpx.
Of course, if I have to manually enter page mappings for all the record IDs that appear in the menu, it's not really a "dynamic menu" anymore. Does anyone know of a way to avoid this problem?
Can I somehow change Databindings.cpx programmatically? Can I change page mappings dynamically? Help, please? I'm very grateful for any and all info.

Hi Vex,
I'm not sure whether you'll find a solution as "Dynamic" as you are describing with dynamic entries via the DataBindings.cpx. Menu's work quite differently in JSF (See section 19.2 on dynamic menus in the developers guide). You may need to get the solution halfway.
1) Drive the menu contents / structure from the database via some backing bean. The sample application that comes with JDeveloper has a fixed menu structure via exposed beans. You'd have to adapt this to be driven off of a managed bean. This takes a bit of work, but it can be accomplished. You'll need to loop through your database records via the Iterator to build the content of your menuModel
2) Let JDeveloper create the entries in DataBindings.cpx to map the pageDef.xml file to each jspx file. (Manual). The pageDef.xml file gets interpreted during the initContext phase of the ADF Lifecycle, and the DataBindings.cpx tells this phase where to look to create the runtime version of the pageDef.xml (See developer's guide 13.2.3).
3) Manually setup your faces-config with the right outcomes.
4) have the database return the outcomes and viewIds, among other values.
5) do the appropriate thing in your JSPX to make use of this menu module backing bean.
In this case, you'll control the content and structure of the menu via the DB. However, you'd have to make sure the data in your DB matches the definitions of the jspx viewid's and outcomes.
However, there is a quite a bit of work involved to do this. I.e. db design, backing bean for menu module, disciplined co-ordination between DB and JSF, etc...
I hope this helps.
Kenton

Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

Hello,
I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet. I have looked through all my documentation but cannot find anything referring to setting that.
What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
Any ideas?
Thanks
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Hello,
LabVIEW should have access to everything that the excel ActiveX object publishes. One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire. This way you will have a macro which you can run that will do this for you. Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification. In any event, to help you with this process, below are some useful links. Also, you will find other threads on this matter if you search the discussion forums.
Excel and LabVIEW Integration Tutorial:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
Here are links to examples of using macros in Excel from LabVIEW:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

HELP NEEDED!!! Windows DVD Maker -- Video's will not work/burn, at all.

I've registered just for this problem as I've tried just about everything imaginable.
What's happening is that when trying to make a DVD from a video file (photo slideshow plus music works fine) that Windows DVD Maker will get to around 74% encoding and then just stop and give me the error message (at this point the progress meter skips to 99%):
"Cannot create the DVD
An error occured when burning the DVD"
I've tried this using an avi file, (I know it works as I have used DVDFLick and its works great,, the menus are no where near as nice as windows dvd maker), and the sample video file included windows (I beleive its a wmv file).
I have looked at the event viewer, heres my error (which seems pretty common doing a google search):
Log Name: Application
Source: Dvd Maker
Date: 21/03/2010 11:48:45 AM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: **************
Description:
The Dvd Maker engine returned an error code (-2147220992) when burning the disc.
Event Xml:
1001
2
0
0x80000000000000
23431
Application
-2147220992
AND THE OTHER ERROR LOG:
Log Name: Application
Source: Dvd Maker
Date: 21/03/2010 11:48:45 AM
Event ID: 1002
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *********
Description:
Dvd Maker returned an error code (0x80040200) when burning the disc.
Event Xml:
1002
2
0
0x80000000000000
23432
Application
0x80040200
OK so here's what i tried:
1. Small video files, the sample one in the public folder, other 700mb avi files.
2. Unchecked all the codecs in the options menu, then checked one at a time, then checked both, *one is AC3Filter, the other is Avi Decompressor from memery, located in the system32 folder, so not sure why it registered there if it's a windows included codec???).
3. http://www.howtogeek.com/forum/topic/mpeg-2-encoder-is-missing/page/2
Have followed this guys instructions on re-registering the required dll files (which I have checked and they are there in the System32 folder). Though when doing this using the "Run" in the start menu for the command "regsvr32 msmpeg2adec.dll" I get the error:
"The module "msmpeg2adec.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070005."
Then I use the command prompt (opening as "Run as Administrator", even though I am an administrator user????) run all the same things, and everything succeeds fine, no errors (but like I said, if don't run as admin, get the same DllRegistryServer error, even though I am an administrator)
Restart the comp. and what do ya know, still doesn't work, same problem, same error.
3. Pictures and music, which burn fine and work fine on a dvd player.
4. Have checked the temporary file where the encoded files are dumped. ie:
C:\Users\******\AppData\Local\Temp\AuthorScript*****.tmp
Have opened the video file in WMC (Media Centre), works fine, no audio but that's still seperated at this point, so no worries there). I noticed though that the AC3 file or audio is at 0kb, and the second it is created when DVD maker is doing it's thing, I get an error, hmm not sure what's goin on there???
5. Have used Vista Media Center Decoder utility. Results were:
Video: Microsoft DTV-DVD Video Decoder
Audio: Microsoft DTV-DVD Audio Decoder
There are no other options (haven't needed to install other codec, don't use Nero either).
I have Windows 7 Pro (64bit), so I have all the necessary codecs built in. (As mentioned, I do have Ac3filter, but that's disable/unchecked in DVD maker, maybe that's the problem???). I would rather not download and install additional codecs.
Oh and it gets to 74% encoding then skips to 99% and the error pops up. From experience making a "picture and music" DVD, 74% is about when it starts burning, or when it merges the video and audio to make the vob file/s. It actually skips quickly to 80% and starts burning (slideshow DVD).
Computer is custom built, it not a HP or anything like that, so I don't have those .ax file extensions in system32 (for those who have seen an answer here: http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/5cb0a40d-223c-4aed-87c4-3c63f400ee81)
So any idea's/suggestions? I know this will help a lot of people as it seems a common problem. I'm pretty tech savvy, so will try to follow any suggestions carefully.
Ohh and finally, for all those who reply thank you, thank you, thank you, even it if doesn't work, any suggestions are appreciated. And for reading my post, thank you, I realise it's a mighty long post. I hope my linking to multiple sites is okay.

I am attempting to burn a DVD from a Divx avi file with an mp3 audio track. I tried twice burning a DVD using Windows DVD Maker and had same result both times. Great picture, correct aspect etc but no audio. I played the DVD on a DVD player and on my laptop
- same result. I should add that I used the preview facility on the software and there was audio. But when I burned the DVD - no audio.
I searched through a few forums, including this one, and tried the recommended procedure of going via Windows Movie Maker. I opened the avi in Movie Maker and chose the DVD option, a message appeared saying that the video would open in Windows DVD Maker which
it did. I clicked on burn and yes, I got picture plus sound. However now the picture was stretched and distorted along the top half of the screen with a green band filling the lower half. I tried once more being careful not to make any silly errors and same
thing.
Divx avi with an mp3 audio track is a very commonly used format so it is surprising that Microsoft haven't configured the software to accommodate this and a number of other common formats such Xvid avi, mp4, m4v etc. with mp3 audio OR ac2 audio.
Surmising that Windows DVD Maker would at least be able to deal with a Windows movie file (a wmv file) I converted the avi to a wmv using AVS Video Converter (a piece of software which I use regularly). NB When converting it's wise to use advance menu to change
frame size to 'original' in order to preserve quality and aspect ratio. There are many other video converters on the market but AVS is a good one.
My supposition was correct DVD Maker produced a perfect DVD from the wmv file. It's unfortunate that Microsoft haven't found a solution to this problem because otherwise DVD Maker does a fine job.
CONCLUSION
Convert your file to an hmv file and then use DVD Maker

ADF- managedbean creation error while making dynamic menus.

im a lil new here so plz excuse and help!
scenario:
to create dynamic menu for two tabs : general..
general has a subtabmenu in form of menubar wid items: country, city,...
i created dynamic menus for my application.wen i ran my page i got this error:
SEVERE: Managedbean menuItem_General could not be created Can't get value from value binding expression: '#{resources['erms.menu.gen']}'
(erms.menu.gen is an entry in UIResources.properties)
now, i followed the exact same process as mentioned in the SRDemo application, in adfdevguide!
also double checked that
i. resource adapter is configured in faces-config.
ii.menu model and menuTreeModel are configured with thier default adapaters in faces-config.
iii.resource bundle specified in jsp page.
can sum1 plz refer
1.wat is the reason of this error? wat are the things dat shud hold true in order to run these dynamic menu? which files shud b specified where?
2. in wat order are the managedbeans created ? is it in order they apprear in faces-config file or in order they are used in the jsp page?
3: is it possible that u click on a menuTab item and it displays its particular menubar's items while staying on the same page? or
u click on a menubar item and it displays its particular dropdowns while staying on the same page?
is it posible wid ADF or javascript shud b used?
best regards
Rabs

im a lil new here so plz excuse and help!
scenario:
to create dynamic menu for two tabs : general..
general has a subtabmenu in form of menubar wid items: country, city,...
i created dynamic menus for my application.wen i ran my page i got this error:
SEVERE: Managedbean menuItem_General could not be created Can't get value from value binding expression: '#{resources['erms.menu.gen']}'
(erms.menu.gen is an entry in UIResources.properties)
now, i followed the exact same process as mentioned in the SRDemo application, in adfdevguide!
also double checked that
i. resource adapter is configured in faces-config.
ii.menu model and menuTreeModel are configured with thier default adapaters in faces-config.
iii.resource bundle specified in jsp page.
can sum1 plz refer
1.wat is the reason of this error? wat are the things dat shud hold true in order to run these dynamic menu? which files shud b specified where?
2. in wat order are the managedbeans created ? is it in order they apprear in faces-config file or in order they are used in the jsp page?
3: is it possible that u click on a menuTab item and it displays its particular menubar's items while staying on the same page? or
u click on a menubar item and it displays its particular dropdowns while staying on the same page?
is it posible wid ADF or javascript shud b used?
best regards
Rabs

Dynamic menus are overlapping. Help needed.

Similar Messages

Maybe you are looking for