Dynamic Type Conflict

I have a context node called ERROR_MESSAGE, with a single attribute
called MSG of type BAPI_MSG.
I encounter an error stating "Dynamic type conflict when assigning references" at the
following point in my code:
lo_nd_error_message->bind_elements( error_msgs )
error_msgs is defined as follows:
Data: error_messages type standard table of bapi_msg.

What is the Cardinality of your context node ERROR_MESSAGE? Make sure that it is 0...n or 1...n.

Similar Messages

Dynamic type conflict during the assignment of references. - Error while generating proxy in the backend

Hi All,
I get a short dump while generating a proxy in the backend.I give the package and the prefix and end up with a short dump.
Does any one know why this mught come up
"Dynamic type conflict during the assignment of references."
background: I imported a WSDl provided by legacy into PI and created service interfaces and then trying to generate a proxy class while i get this error.
Thanks.

Hi Shyamsundar,
I will explain a problem that I usually see in some developments:
XSD originally:                                  XSD transformed:
Root                                                     -> Root
Tag 1 type int                                    -> Tag 1 type int
Tag2 type string                               -> Tag2 type string
Tag3 type any                                  - Tag3 type string
Normally the tag3 should have a XML inside. Then the ABAPers have to construct the tag3 with a CDATA structure (CDATA is used to put in an XML tag more XML tags inside like a text and no to be interpreted).
Later in SAP PI you can extract the cdata with an XSL, you can find some examples in the SCN.
I don’t like to convert the whole XML in only one string tag, because this makes difficult the develop for the ABAPers, although the work inside the PI is very easy because with an XSL you can extract the whole message easily. (You can find some examples in the SCN)
Regards.

Error Dynamic type conflict when assigning references in EHP4

Hi Experts,
We are facing problem while customizing application wizard in EHP4.
Based on our requirement, we need to create one more tab named "Notes" to add instructions for applicants while applying for Job. It contains only instruction. To achieve this, we have done below set up.
1. We have created new WD component (WD window), OTR Alias
2. Created one more additional steps in T77RCF_RM_STEP called "Notes" and maintained step 1 information
3. In table T77RCF_RM_SEQ, under Application wizard (employee), we have added notes in sequence 1.
Now our new tab "Notes" is reflecting in application wizard. But while cliking on send application, we are getting error "The following error text was processed in the system GEG : Dynamic type conflict when assigning references".
Error Details:-
u2022     The following error text was processed in the system GEG : Dynamic type conflict when assigning references
u2022     The error occurred on the application server sapgeg_GEG_59 and in the work process 0 .
u2022     The termination type was: RABAX_STATE
u2022     The ABAP call stack was:
Can anybody guide what we are doing wrong?
It would be great help.
Regards,
purnima

Hi Rajasekhar,
     Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman

Dump while testing Function- Dynamic type conflict when assigning reference

Hi Gurus,
I have the following checked and activated-
- Function with 1 Ruleset
- The Ruleset containing couple of DBlookup expressions
- Value range
- Decision Table
- Decision tree,
- Procedure call
After I give test data while Simulating the function, I get this dump-
Short text
    Dynamic type conflict when assigning references
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_FDT_DB_LOOKUP==============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Have I missed something? We are on SAPKA70207.

Hi Carsten,
I couldn't find an OSS note featuring-
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
"CL_FDT_DB_LOOKUP==============CP" or "CL_FDT_DB_LOOKUP==============CM01K"
"BUILD_WHERE_CLAUSE_LIMIT"
Raised OSS note.

RFx Q&A dump SRM 7- Dynamic type conflict when assigning references Q&A

Hello,
We are on SRM 7.0 SP05. When adding a question via the Q&A 'chat' functionality on a published RFx the EP shows the following error: 'Dynamic type conflict when assigning references Q&A'.
Could somebody test if this issue is also occuring on their system?
Anybody has a clue what's causing this?
Kind regards,
Tim

Hello Jay,
Loggings show the following:
15:18:49 DIA 000 100 NLPURCOR AB 0 Run-time error "MOVE_CAST_ERROR" occurred
15:18:50 DIA 000 100 NLPURCOR AB 1 > Short dump "100324 151849 dmzsv719 b_SRM_00 " generated

SC BRF WF Dynamic type conflict when assigning references

I have activated the process controlled workflow framework and
activated the SAP provided SC BC set. When I try to create shoppping
cart(while save or check) I get the following short dump.
The URL
https://usil0c20.ca.com:8343/sap/bc/webdynpro/sapsrm/wda_l_fpm_gaf was
not called due to an error.
Note
The following error text was processed in the system CS2 : Dynamic type
conflict when assigning references
The error occurred on the application server usil0c20_CS2_00 and in the
work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: INIT_BRF_TRACE of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: CONSTRUCTOR of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: INITIALIZE_BRF_MSG of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of
program /SAPSRM/CL_WF_BRF_CONNECTOR===CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of
program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_SCHEME of program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_PROCESS_SCHEME of program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_LEVEL_SEQUENCE of
program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_INSTANCE of
program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Method: CREATE_PROCESS_FORECAST of
program /SAPSRM/CL_WF_APV_FACADE======C

Hi,
The dump either happens because the BRF Object SRM_WF is missing in the system or
in the object SRM_WF at BRF the correct trace class /SAPSRM/CL_WF_BRF_TRACE is not used on it.
thus please check.
Thanks,
Melina

ErroruFF1A Dynamic type conflict when assigning references

hi all,
I have one node ,name is :forloop
under this node ,there is a attribute ,its type is string ,its name is attf
now ,I write code as below in action,but it show a error" Dynamic type conflict when assigning references "
someone can tell me the reason?thanks
data :
        for_loop type ref to if_wd_context_node,
        t_var type standard table of string.
    append 'a' to t_var.
    append 'b' to t_var.
    append 'c' to t_var.
    for_loop = wd_context->get_child_node( name = wd_this->wdctx_forloop ).
   for_loop->bind_elements( t_var ).
thanks

Hi,
   The problem is the internal table you are using is not match with the attribute u created.
Node name : forloop
         Cardinality : 0-n.
         selection   : 0-1
attr name   : attf
Use the below code.
DATA forloop TYPE REF TO if_wd_context_node.
DATA t_var TYPE table of wd_this->element_forloop.
data : wa_tar like line of t_var.
wa_tar-attf = 'a'.
append wa_tar to t_var.
wa_tar-attf = 'b'.
append wa_tar to t_var.
    wa_tar-attf = 'c'.
append wa_tar to t_var.
navigate from <CONTEXT> to <FORLOOP> via lead selection*
forloop = wd_context->get_child_node( name = wd_this->wdctx_forloop ).
forloop->bind_elements( EXPORTING
    new_items            = t_var
Regards.
Ragu.
Edited by: Ragu Prasad on Feb 6, 2009 10:39 AM

Dynamic type conflict when assigning references - Dump

Hi All,
I am getting the dump "Dynamic type conflict when assigning references". In my application I have used a table control inside which I have input field, text view and text edit.
I guess the text edit is creating the issue. The error analysis report is below :
If anyone have any idea about the issue, please help.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_MOVE_CAST_ERROR', was not
     caught in
    procedure "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT" "(METHOD)", nor was it
     propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    It was tried to assign a reference to a rereference variable using the
    'CAST' operation ('?=' or 'MOVE ?TO').
    However, the current content of the source variable does not fit into
    the target variable.
    source type: "\CLASS-POOL=/1WDA/L0STANDARD\CLASS=CL_TEXT_EDIT"
    target type: "\INTERFACE=/1WDA/VTABLE_CELL_EDITOR"
Information on where terminated
    Termination occurred in the ABAP program "/1WDA/L3STANDARD==============CP" -
     in "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 2290
    of the (Include) program "/1WDA/L3STANDARD==============CCIMP".
    The termination is caused because exception "CX_SY_MOVE_CAST_ERROR" occurred in
    procedure "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT" "(METHOD)", but it was
     neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "/1WDA/L3STANDARD==============CP "; its source
     code begins in line
    2034 of the (Include program "/1WDA/L3STANDARD==============CCIMP ".
2265       if va__CONTENT_READONLY is bound and
2266          va__CONTENT_READONLY->IFUR_NW5__CONTROL~_IID <> ifur_nw5_invisible=>_iid_invisible.
2267         IFUR_NW5_SAPTABLECELL~HASCONTENT = abap_true.
2268       else.
2269         IFUR_NW5_SAPTABLECELL~HASCONTENT = abap_false.
2270       endif.
2271     endif.
2272
2273 *    >> ProvideCONTENT
2274
2275     IF mv_CONTENT_READONLY <> va__CONTENT_READONLY.
2276       finalize_adapter( mv_CONTENT_READONLY ).
2277       mv_CONTENT_READONLY ?= va__CONTENT_READONLY.
2278     ENDIF.
2279
2280 *   >> property-Aggregation mv_CONTENT_EDITABLE
2281     DATA va__CONTENT_EDITABLE TYPE REF TO /1WDA/VTABLE_CELL_EDITOR. "#EC NEEDED
2282 *   >> UCA STANDARD|TABLE_CELL|CONTENT_EDITABLE
2283     data adp_uielement type ref to /1WDA/VUIELEMENT. "#EC NEEDED
2284     if mv_CONTENT_READONLY is not bound and
2285        mv_WD_TABLE_CELL_EDITOR is bound.
2286           va__CONTENT_EDITABLE ?= mv_CONTENT_EDITABLE.
2287     IF va__CONTENT_EDITABLE is bound and va__CONTENT_EDITABLE->m_view_element = mv_WD_TABLE_
2288     ELSE.
2289
>>>>>     va__CONTENT_EDITABLE ?= create_by_view_element(
2291                          view_element = mv_WD_TABLE_CELL_EDITOR
2292                          parent       = me
2293     ).

Hi Everyone,
Thanks for your replies.
We raised an OSS call for the same and got the below response.
Dear Customer,
I've analized your actual problem and found out that you are using a notallowed combination of text edit as cell editor within table for
clasical Web Dynpro ABAP rendering. The text edit as cell editor work in701 releases when the lightspeed rendering is enabled. However in case
that you want to used
lightspeed rendering, I would suggest to upgrade on a higher
SP level than SP4 as for technical reason we can only deliver
corrections for Unified Rendering first from SP04.

Dynamic type conflict when assigning references

Hi All,
I have tried to call the URL,but it was not called due to the following error,could u plz help me in this
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_ITEM_TYPE of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: IF_COMPONENTCONTROLLER~GET_ITEM_TYPE of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: PRE0EJHV2JXJD3DF47PXY1KJP2ND of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: IF_VI_RES_MAIN~COMPONENT_NAVIGATION of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: ON_START_RES_MAIN of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: FIRE_EVENT of program CL_WDR_COMPONENT==============CP
Method: IFWDR_INTERNAL_API~RAISE_EVENT of program SAPLWDR_RG_PROXY_FACTORY
Method: IF_COMPONENTCONTROLLER~FIRE_ON_START_RES_MAIN_EVT of program /1BCWDY/I3G4WYSTK8YREBVBBXMC==CP
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system STD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server stdmain_STD_57 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server stdmain_STD_57 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Regs,
Surendra.
Edited by: Konduru Surendra on Jan 9, 2008 11:58 AM

Hi ,
there is some problem in a method GET_ITEM_TYPE when a call is made ...check this method.....set breakpoint in this method .. and debug it..
Regards
Yash

Dynamic type conflict when assigning references - dump in HR forms

Hello Experts,
When User(Manager) trying to initiate HR eForm in MSS getting dump for all the his reportees. This dump is persisting only Production system and for only one User. Could you please check the attached dump in and kindly assist me.
Regards,
Rajasekhar

Hi Rajasekhar,
Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman

Dynamic Type Conflect when assigning References error in portal

Hi Forum,
We have one ABAP Dynpro Application which runs fine but gives "Dynamic Type conflict when assigning References" error dump after integrating it with Netweaver portal 7 SP12 by creating Webdynpro ABAP iview.
Please help us to resolve this issue.
Thanks and Regards
Sudhir

hi
refer this article :
How to Create Web Dynpro-Based iViews
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e36d690-0201-0010-cd99-bfbb81bd33d9
refer the SAP online help :
Create a Web Dynpro iView
http://help.sap.com/saphelp_nw04/helpdata/en/2c/00584289e59041e10000000a1550b0/content.htm
regards,
amit

Type conflict during dynamic method call.

While executing the following program I get the error "Type conflict during dynamic method call.":
DATA: container_r TYPE REF TO object,
      grid_r       TYPE REF TO object,
      itab_saplane TYPE TABLE OF saplane.
* IMPORTANT NOTE: class names must be in UPPER CASE
DATA: str_cnt TYPE seoclsname VALUE 'CL_GUI_CUSTOM_CONTAINER',
      str_gui TYPE seoclsname VALUE 'CL_GUI_ALV_GRID',
      meth_name TYPE STRING VALUE 'SET_TABLE_FOR_FIRST_DISPLAY'.
TYPE-POOLS abap.
DATA: ptab    TYPE abap_parmbind_tab,
      wa_ptab LIKE LINE OF ptab,
      ref     TYPE REF TO data.
CREATE OBJECT container_r TYPE (str_cnt)
EXPORTING container_name = 'CUSTOM_CONTROL1'. " Name of the custom control area (UC!)
* Construct parameter itab
GET REFERENCE OF container_r INTO ref.
wa_ptab-name = 'I_PARENT'. " Must be upper-case
wa_ptab-value = ref.
INSERT wa_ptab INTO TABLE ptab.
*   EXPORTING i_parent = container_r.
CREATE OBJECT grid_r TYPE (str_gui)
PARAMETER-TABLE ptab.
SELECT * FROM saplane INTO CORRESPONDING FIELDS OF TABLE itab_saplane.
* Cannot call set_table_for_first_display directly...
CALL METHOD grid_r->(meth_name)
EXPORTING I_STRUCTURE_NAME = 'SAPLANE' " Type of the rows in the internal table (UC!)
CHANGING IT_OUTTAB = itab_saplane.     " The internal table itself
CALL SCREEN 100.
Any help would be appreciated!

Hi ...
Apologies ... for confusion ... actually both are required ...
the type 'E' as well as CL_GUI_CONTAINER.
The below code worked for me ...
check out how I cast it to the parent class type ...
DATA : lv_container   TYPE seoclsname VALUE 'CL_GUI_CUSTOM_CONTAINER',
         lv_control     TYPE seoclsname VALUE 'CL_GUI_ALV_GRID',
         lv_method      TYPE string VALUE 'SET_TABLE_FOR_FIRST_DISPLAY',
         lt_par_tab     TYPE abap_parmbind_tab,
         ls_param       LIKE LINE OF lt_par_tab,
         lref_cont      TYPE REF TO cl_gui_container,
         lv_data        TYPE REF TO data.
CREATE OBJECT lref_container
      TYPE
        (lv_container)
      EXPORTING
        container_name = 'ALV_AREA'.
    ls_param-name = 'I_PARENT'.
    ls_param-kind = 'E'.
    lref_cont ?= lref_container.
    GET REFERENCE OF lref_cont INTO lv_data.
    ls_param-value = lv_data.
    INSERT ls_param INTO TABLE lt_par_tab.
** Now create ALV Control.
    CREATE OBJECT lref_alv_ctrl
      TYPE
        (lv_control)
      PARAMETER-TABLE
        lt_par_tab.
** Set table for 1st display
    DATA : lv.
    lv = lref_alv_ctrl->mc_fc_print.
    CALL METHOD lref_alv_ctrl->(lv_method)
      EXPORTING
        i_structure_name = 'T001'
      CHANGING
        it_outtab        = lt_company.
Cheers
Edited by: Varun Verma on Aug 12, 2008 4:19 PM

Type conflict in function module parameters

Hi All,
i hve to pass dynamic field <dyn_field> into function module parameters but it's giving a dump for type conflict.
where VALUE2 data type in 'AUTHORITY_CHECK' is UST12-VON but if i define <dyn_field> type UST12-VON . then it'll give dump in *ASSIGN COMPONENT SECURITY_TABLE-FIELDNAME of structure <wa> to <dyn_field> *.
SECURITY_TABLE-FIELDNAME data type is different with UST12-VON .
pls guide me how to pass *<dyn_field> in fm parameters.
FIELD-SYMBOLS: <dyn_field> type any.
LOOP AT <DYN_TABLE_IN> INTO <WA>.
        ASSIGN COMPONENT SECURITY_TABLE-FIELDNAME of structure
             <wa> to <dyn_field> .
        CALL FUNCTION 'AUTHORITY_CHECK'
          EXPORTING
            USER                = QUSER
            OBJECT              = SECURITY_TABLE-AUTHOBJCT
            FIELD1              = 'ACTVT'
            VALUE1              = '03'
            FIELD2              = SECURITY_TABLE-FIELDNAME
            VALUE2              = <dyn_field>

Hi anuj ,,
Can you explauin the solution ..
Regards

CTE : ERRO MONITOR ( Type conflict in program /XNFE/SAPLGROUPING )

Ola Sap Experts, preciso de uma mão de vcs.
Estou em um ambiente de um cliente onde o monitor de outbound de CTe, quando se tenta acessar o detalhe da CTe ou qualquer outra ação é gerado o erro "Type conflict in program /XNFE/SAPLGROUPING. (termination; RABAX_STATE)" é gerado um dump na ST22.
O cliente nao tem qualquer customizacao desse monitor usa de maneira standart e se encontra no sp 16 do SLL-NFe rodando em base de um PI 7.31 dual stack.
Alguem já passou ou esta passando por isso ?

Prezados,
Alguém conseguiu resolver o DUMP?
Estamos enfrentando o mesmo problema no projeto, mas o erro só ocorre quando testamos um cenário com IPI Return.
Alguma dica?
Obrigada,
Tatiana Augusto

How can I fix a xquery resulting error ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence - got multi-item sequence

Hello,
How can I improve the XQuery below in order to obtain a minimised return to escape from both errors ORA-19279 and ORA-01706?
XQUERY for $book in fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy where $cont   [ora:contains(text(), "(near((The,power,Love),10, TRUE))") > 0] return $book
ERROR:
ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence
- got multi-item sequence
XQUERY for $book in fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy where $cont   [ora:contains(., "(near((The,power,Love),10, TRUE))") > 0] return $book//bdy
/*ERROR:
ORA-01706: user function result value was too large
Regards,
Daiane

below query works for 1 iteration . but for multiple sets i am getting following error .
When you want to present repeating groups in relational format, you have to extract the sequence of items in the main XQuery expression.
Each item is then passed to the COLUMNS clause to be further shredded into columns.
This should work as expected :
select x.*
from abc t
   , xmltable(
       xmlnamespaces(
         default 'urn:swift:xsd:fin.970.2011'
       , 'urn:swift:xsd:mtmsg.2011' as "ns0"
     , '/ns0:FinMessage/ns0:Block4/Document/MT970/F61a/F61'
       passing t.col1
       columns F61ValueDate                Varchar(40) Path 'ValueDate'
             , DebitCreditMark             Varchar(40) Path 'DebitCreditMark'
             , Amount                      Varchar(40) Path 'Amount'
             , TransactionType             Varchar(40) Path 'TransactionType'
             , IdentificationCode          Varchar(40) Path 'IdentificationCode'
             , ReferenceForTheAccountOwner Varchar(40) Path 'ReferenceForTheAccountOwner'
             , SupplementaryDetails        Varchar(40) Path 'SupplementaryDetails'
     ) x ;

Dynamic Type Conflict

Similar Messages

Maybe you are looking for