Dynamic UI Element multiple times

Dear all.
I am able to create one dynamic UI element, and bind to a node.
Now the point is my node is of cardinaly 0..n.
Based on some logic, there can be various (or 0) text edit UI element dynamically.
How can I write this code? Any help is greatly appreciated.
Thanks in adv!

Hi,
Check this code
data: LR_CONTAINER type ref to CL_WD_UIELEMENT_CONTAINER,
LR_BUTTON type ref to CL_WD_BUTTON,
LR_FLOW_DATA type ref to CL_WD_FLOW_DATA.
do 10 TIMES.
LR_BUTTON = CL_WD_BUTTON=>NEW_BUTTON( ).
LR_FLOW_DATA = CL_WD_FLOW_DATA=>NEW_FLOW_DATA( element = LR_BUTTON ).
LR_CONTAINER ?= view->GET_ELEMENT( 'ROOTUIELEMENTCONTAINER' ).
LR_CONTAINER->ADD_CHILD( LR_BUTTON ).
enddo.
it is for inserting 10 buttons on the same basis you can insert number of text views......
regards
Pranav

Similar Messages

Same Dynamic Filename used multiple times

Hi all,
In PI we would like to use the same dynamically created filename for multiple outputs of the same file in different locations.
Is it possible to create the filename and save it in a Java container (for instance) that can be accessed by other mapping programs?
Many thanks,
Aldo

>
Aldo wrote:
> Hi Sunil,
>
> I don't know if I'll be able to resolve my problem using these features......... but this for sure answers my question. Thank you.!
>
> Best regards,
>
> Aldo
Just to correct you here... Your requirement is to reuse the file name value in different mappings and NOT to reuse the udf code.
The above blogs say's how to reuse the udf code in different mappings... So make sure what exactly you are looking for...
UDF can only store the value at run time for a particular mapping... once execution is over the value will be lost.
So as suggested by Sunil, you can store the file name into some table and then use the RFCLookup get it into your another mappings...

How to get the values multiple times for the specified element - ABAP IXML.

Hi all,
         i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name    = ippara2
Parameter type      = binary
2nd record
Inbound plug name = hi
Parameter name    = hipara
Parameter type      = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.

I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

Element showing Multiple times in SOE.

Hi,
I have added one element called 'Basic' one time only in element Entries. But it is showing 2 times in SOE report and Run Results also.
How to remove that. Pl. help.
Thanks in advance.

The Element was processed multiple times in the Payroll run and hence you can see the element twice in the Run Results. The possible reasons could be
1. Element was prorated.
How to check : Check whether the Start Date and End Date were populated in the run results screen for the two entries of the element.
2. Multiple Element entries were created for the Element which is ruled out as you confirmed that there are no multiple element entries.
3. Run results were triggered due to Indirect Results.
you need to fire some queries to find out this.
select * from pay_element_entries where element_entry_id in (select source_id from pay_run_results where run_result_id in (<id1>,<id2>) )
where id1 and id2 are run_result_ids of the two run result entries for the element.
Performing above checks should give you the reasons.
Regards,
Sharath

How to use same dynamic text, multiple times in a Movie

FLASH CS5.5
How can a dynamic text field be used multiple times, on any
frame, in any new layer during a Movie?
~~
A number of unique dynamic text fields are being used.
The intent is to use them each, many times during a Movie.
(i.e. a users first name)
They are successfully being "ExternalInterfaced" from a PDF form field.
(the SWF is displayed within the PDF as a RMA)
This all works well, IF I only use one instance of the dynamic text field.
(one use of each unique text field)
If I try and use that same dynamic text field, again, in a new layer, later in the SWF,
all of that said, duplicate dynamic text fields do not display.
~~
Stumped!!!
Thanks in advance for your advice / comments!
D-

Thanks Ned,
I always welcome learning something new.
I did not know creating a new keyframe,
creates a new instance.
Yes, I had used the same dynamic text field instance name in
numerous, new layers (great observation).
With the objective to display the User's name throughout
the timeline (on and off)...
I'll attempt to paraphrase your solution;
Use a single layer to display the dynamic text field.
Extend this layer's timeline throughout the movie, or end use of the dynamic text field.
Help with this one ??
Set the visible properties to true or false as need through out the timeline.
( Does require an AS3 ? )
I'll give that a try.....
~~
Side of effect of using the above solution;
The SWF in it's attempted state, uses the dynamic text field instance, in
different places, different text sizes, on the stage, throughout the Movie.
(i.e. the User's first name appears in different sentences...)
Per the solution above,
I believe I will be limited to One location, one format setting.
Is this assumption correct?
I can make this work from a display / Movie point of view.
However, your first VAR concept, noted above, might be
worth exploring should more flexibility be required.
Thanks for making the time to coach...
D-

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
Photoshop Elements
Good luck on it!
Gene

I have elements 8 and I want to be able to load the same picture in multiple times because

Question - I have photoshop elements 8 and I want to be able to load the same picture in multiple times because I have 1200 pictures already pregrouped into 60 file categories and some pictures are duplicated thruout these files. How can I get elements 8 to load the duplicates - it currently seems to default to only loading the picture one time and not allowing duplicates

The apple lightning to 30 pin works just fine for me.
Works with a fio amp and srs iwow.

[svn:osmf:] 13557: Fixing problem where a lingering TraitAggregationHelper causes elements to be added multiple times on ParallelDisplayObjectTrait .

Revision: 13557
Revision: 13557
Author:   [email protected]
Date:     2010-01-17 10:05:12 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing problem where a lingering TraitAggregationHelper causes elements to be added multiple times on ParallelDisplayObjectTrait.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as

Revision: 13557
Revision: 13557
Author:   [email protected]
Date:     2010-01-17 10:05:12 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing problem where a lingering TraitAggregationHelper causes elements to be added multiple times on ParallelDisplayObjectTrait.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as

Can Elements be installed multiple times on different computers?

Can elements be installed multiple times on different computers.

It can be installed on as many computers as you want, but it can only be activated and thus used without restrictions on 2.
Mylenium

Using same bind variable multiple times in Dynamic sql

Hi;
I have a query which uses same variable multiple times, is there a way I could use only one time that variable and it will take multiple times.
Query is;
execute immediate 'SELECT count(*) FROM x WHERE MONTH_ID = :VOMNTH_ID
UNION
SELECT count(*) FROM Y WHERE MONTH_ID = :VOMNTH_ID
union
SELECT count(*) FROM z WHERE MONTH_ID = :VOMNTH_ID ' using month1,month1,month1
What I want Just supply month1 only once.
Your help is appreciated.
VKM

the way suggested by Nigel worksI'm not sure what you intend to use the resultset for but remember that UNION will remove duplicates from the result set and could possibly sort it too. Even if that were not the case (for example if you used UNION ALL) Oracle does not specifically guarantee the order of resultsets.
If you are expecting the first row to contain the first count (and so on) then you might not get the answer you are expecting.
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> SELECT 3 n
2 FROM   dual
3 UNION
4 SELECT 2 n
5 FROM   dual
6 UNION
7 SELECT 1 n
8 FROM   dual;
         N
         1
         2
         3
SQL> SELECT 1 n
2 FROM   dual
3 UNION
4 SELECT 2 n
5 FROM   dual
6 UNION
7 SELECT 2 n
8 FROM   dual;
         N
         1
         2
SQL>

Dynamic Sorting on Multiple filed in Crystal report 2008

Hi
I am using Crystal report 2008 sp3 full build with hotfix 3.3 along with ASP.NET 2.0
I have implimented the multi filed sorting using the record sort export and setting the sort order in the report designer.
Now my requirement is such that i would like to have dynamic sorting on multiple fileds while report is displayed in the UI.
Means suppose i have a report with Customer region,name,city,rating,status etc.
Now by using the sort control i would like to have the functionality in such a way that if user
a) first sorts on the region then the records should be first sorted by region
b) then sorts on the city then the records should be sorted first by region then by city
c) now sorts on the rating then the records should be sorted first by region ,second by city and then by rating
Now other user may do
a) first sorts on the rating then the records should be first sorted by rating
b) then sorts on the status then the records should be sorted first by rating then by status
c) now user sorts on the region then the records should be sorted first by rating,second by status and then by region
and so on the sorting criteria changes from user to user through the UI.
Is there any way to achieve the dynamic kind of sorting with Crytsal report 2008 where we can set the order of the fileds at sorting in UI dynamically .The sorting order of the fields are not known at the time of design of the report and its completely depends on the user's need.
Please let me know if you require any information on the same.
Regards,
smitha

Hello,
   Good Day!
   Thanks for your answer.
   Could you please explain me in detail how to achieve this functionality?
   Do i need to create a static parameter?
   I get my data set through the command option in crystal report.So i think i need to go by formula in the report.
   i am just putting down the steps to follow.Please correct me if i am wrong.
step1 :Create s static parameter with the name SORT.
step2: create the formula as you have mentioned like
    (IF {?Sort}='Vendor Number' THEN {Pr_Voucher_Status;1.Vendor_Key}& " "& {Pr_Voucher_Status;1.ap_remt_key}
    & " " & {@date}
   else
    IF {?Sort}='Invoice Number' THEN {Pr_Voucher_Status;1.ap_vchr_invno}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
    " " &{@date}
   else
   IF {?Sort}='Invoice Amount' THEN {Pr_Voucher_Status;1.ap_vchr_amtc}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
     " " &{@date})
    I could not understand what this formula is really doing .
    Could you please tell me what the following names indicates? :
              Pr_Voucher_Status :- Table/Command name ??
              Vendor Number,Invoice Number etc.. :- ??
             Vendor_Key,ap_vchr_invno,ap_vchr_amtc .. :- Filed names ??
             use of 1.{} :- ??
step3: place the below formula in the page header to display the sort order
    (if {?SORT}='Vendor Number' then "Vendor Number, Remit To, Invoice Date"
          else if {?SORT}='Invoice Number' then "Invoice Number, Vendor Number, Invoice Date"
          else if {?SORT}='Invoice Amount' then "Invoice Amount, Vendor Number, Invoice Date") .
Note:-My report does not have grouping.Do i need to have grouping?
in this case how the sort control will work ?
As i have mentioned in the first post the order of sorting is completely depends on the user's perspective .
The report is used by the whole organization ..
i mean the people with different roles like Manger,Team leads,modul leads,developers ,testers etc..
the usage of report varies according to the roles so the sort order also.
Regards,
smitha.
Edited by: smitha thomas on Mar 16, 2011 5:01 AM

Re: Running the same (Forte) application multiple times -for different

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Using multiple timer in the same SessionBean

Hello,
Is it possible to use multiple timer in the same Stateless Session Bean. In my application a user can schedule some task to execute. To do so I was thinking of creating a Session Bean which would create calendar timer on user request and, when one of the timer expires, retrieve the task to execute thanks to the information stored in the timer.
When I tried the solution explained above, it seems that the @timeout method is synchronized on 1 timer. For example if I create a timer that will be executed every 10 seconds and another one executed every 30 seconds, the timeout callback is called every 30 seconds but 4 times.
My code looks like that :
@Stateless
@LocalBean
public class TimeManager {
    public void onUserRequest(ScheduleExpression expression) {
        Timer timer = timerService.createCalendarTimer(expression, timerCfg);
    @Timeout
    void timeout(Timer timer) {
        logger.log(Level.INFO, (String) timer.getInfo());
}Is there a way to do what I want?
Thank you

This doesn't make any sense to me. If i were to write a bunch of schemas for a particular applicaion, would
I have them all in the same namespace? You would normally have one schema that describes the information model associated with the one namespace that the different documents in your application use.
If so, why can't I load more than one in the same name space?The parser chooses the schema based on the namespace alone. There is no other information used to decide which schema to use, so you can only have one schema for the namespace.
They all have different root elements.You can have different root elements in the one schema.
I don't even need the namespaces, but I can't
figure out how to get rid of them (the schema isn't valid with out them according to XML Spy). You can set the schema explicitily before parsing, but not (AFAIK) set after parsing has begun, except by using the mapping of namespace to schema location.
I have also tried to use the external-noNameSpaceSchemaLocationproperty, but it doesn't seem like you can pass in an array of schemas to that one. It only expects a
String as the Object you pass in to setProperty. Yes, you can only validate a document against the one schema.
So, how can I load all my schemas so I don't have to reference them in the XML documents? Either combine your schemas so you have one schema for your namespace that validates elements which are defined in that namespace (the formal/correct way of doing it), or construct a filter that inserts a PI to point to the schema once the root element is opened (the pragmatic/bit of a hack way of doing it).
Pete

Dynamic layout elements determination logic for output of Pro-Forma Invoice

This is my requirement below. Please give the suggestion
Business requires output to be generated in name of the client, with client logo and scenario specific data elements. To do this in Standard SAP will require to define hundreds and hundreds of layouts. By making most of the client/scenario elements on the layout we can greatly reduce the number of required layouts and reduce implementatuion effort and lead-time.
     The goal is to define a generic table that will hold most of the dynamic layout elements for different document types and countries, including logo, sender address etc.
      For this we will create Z-versions of the output types BA00 ( Order Confirmation, ZPRI (Pro-Forma Invoice) and RD00 (ZD00 Invoice).The layout text blocks will be permanently fixed.The print Program user-exit should call the Z-table that holds the dynamic layout elements and retrieve these elements and merge them with the matching layout text block.
Message was edited by: janardhan b

Hi Janardhan,
   Even I have faced the similar situation.but what we have done is instead of calling the dynamic text elements..Why don't we call the text elements based on the required condition ,Then u dont have to maintain all the text elements required in the table.In the table we can only have the doumnent type,client name,logo name and address.
In the print program if u r using script layout then call the required text elements (write_text) based on the client name and document type that is fetched from the Z-table,Otherwise if u r going for smartforms then with in the layout give the condition under the conditions node of the window or the text.

Run a subvi by pressing a button multiple times

Hi
I wanted to run a subvi each time the user pushes a button.
So the subvi might be called multiple times & different instances of the subvi run simultanously with their front panels open.
To do this I made a .vit & call it by refrence wehenever a button is pressed but it doesn't work.For the first time it opens but it seems as if the .vit doesn't return after it is called. while if I use the same method & call the .vit by reference 2 times in parallel both of the front panels open without problem.
How can I solve this problem(the main & the subvi are attached LV 7.0).
Thanks for your attention in advance
Attachments:
main.vi ‏35 KB
subvi.vit ‏43 KB

Hi,
You have to run it dynamically, with the Run VI method. This method can
optionally wait or not. Before running the VI, you have to set the controls
with the method Set Control Value (or Set Control Value [Variant]).
There are several ways to read back values from dynamically started VI's.
One is to use a buffer (lv2 global). Another is to use the Get Control Value
method.
It's complicated, but if you put all this code in a sub vi, you'll end up
with a nice main...
Regards,
Wiebe.
"smal" wrote in message
news:[email protected]..
> Hi
> I wanted to run a subvi each time the user pushes a button.
> So the subvi might be called multiple times & different instances of
> the subvi run simultanously with t
heir front panels open.
> To do this I made a .vit & call it by refrence wehenever a button is
> pressed but it doesn't work.For the first time it opens but it seems
> as if the .vit doesn't return after it is called. while if I use the
> same method & call the .vit by reference 2 times in parallel both of
> the front panels open without problem.
>
> How can I solve this problem(the main & the subvi are attached LV
> 7.0).
>
> Thanks for your attention in advance

Dynamic UI Element multiple times

Similar Messages

Maybe you are looking for