Dynamically configure "required" on MessageTextInput

Gurus!
Quick question ... I need to dynamically configure the "required" option on a MessageTextInput if data is initially populated in the form. Do you guys know of any way this can be done?
Thanks,
-Scott

you can use setRequired() method in the processRequest()
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAMessageTextInputBean a = (OAMessageTextInputBean)webBean.findChildRecursive("InputTextId");
a.setRequired("no");
--Prasanna

Similar Messages

Dynamic configuration required in sender file - Adapter Module

Hi Everybody,
I am developing an Adapter Module in the file adapter (sender) using Adapter Specific Message Attributes.
I am using Dynamic configuration inside the Module Process method in the adapter module.
We are getting an error saying Dynamic Configuration cannot be resolved.
Can anybody tell me the package to be used.
Thanks,
Zabiulla

You can access the dynamic configuration in adapter module like this:
Message msg = (Message) inputModuleData.getPrincipalData();
String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File", "FileName");
You do not need any addition library besides the adapter module API.
Hope that helps
Stefan

Two FileName in Dynamic Configuration

Hi All,
I have a very rare problem. In an interface which uses BPM, where file is the sender and Proxy is the target,
there is an ABAP Class in the mapping which uses Dyanmic Configuration to retrieve the FileName and create a Proxy structure and posts it to the ECC. In this scenario, Multiple files are picked from different folder using advanced Selection and sent to BPM which uses the ABAP Class.
When i run the interface with 5 different files placed at source, In SXMB_MONI, I can see that after 3 files are processed successfully with a single filename in the Dynamic Configuration, the 4th or the 5th one wil have 2 filenames in the dynamic configuration out of which the first filename will be the copy of the earlier processed filename and the second one wil be the actual required filename. The above behaviour keeps on chainging.
How can this be possible as the Context Object 'FileName' can have only single filename through out the interface instance, as there is no setting of the filename done in dynamic configuration.
Please reply if anyone has a solution to the above problem.
Thanks.

Hi Jaideep..
Thanks for the reply.
Yes.. its a serial processing. Let me explain a bit more.
as i said above, after the 3rd BPM instance (Just as an example.. keeps on chainging), the 4th instance has a unique filename compared to before 3. but after processing, the Dynamic Configuration in SXMB_MONI will have 2 fileNames. which will have a copy of any one of the earlier filenames along with actual filename.

File name cant be fetched from Dynamic configuration...mutli-mapping used

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Problem facing in Dynamic configuration in SAP PI 7.3

Hello,
I am doing dynamic configuration in sap pi 7.3. I am using the following UDF.
String devFileName="'a.vc'";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
I am using this UDF in message mapping and mapped this UDF in the message header.
I have selected the adapter specific message attribute in receiver communication channel also.
Still I am getting the folowing error.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
Exception caught by adapter framework: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header
'Transmitting the message to endpoint using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message header.
Please help me what to do.
Thanks & Regards,
Moumita

Hi, try this code:
String devFileName="a.vc";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFilename);
ASMA checkbox and respective parameter should be enabled in the required Adapter.
Best Regards

Dynamic configuration for PI 7.1 in mapping for file adapter

Hi Experts,
I have used the code below to use dynamic configuration in PI 7.1, but it isnt working..
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm.
it shows the file name in the dynamic configuration in the sxmb_moni...
but hen i chekc it in operations mapping..it shows dynamicconfiguration has to be in queue ..
has ne one used it before??
I used a simple UDF to create it without any input parameter and I mapped it to a field n the target side...
has ne one faced a similar situation????
Regrads,
Tauseef

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Dynamic Configuration-File to File in scenario

Hi Experts,
As per the requirement needs to supress the numeric extensions of the files and transfer to the receiver.
Example: file name is XXX123.txt , but after picking up by sender communication channel in XI that file needs to converts XXX.txt and transfer to the receiver. Finally in the receiver end the file name should be Mahesh.txt only.
Please share the inputs how to do dynamic configuration in XI in File to File scenario.

Hi,
First you need to have a UDF as shown below. No need to put any arguments in the UDF.
public String getFileName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//get file name in string s
String s = conf.get(key);
//remove all numeric values
int i,l;
l=s.length();
String a="";
for(i=0;i<l;++i)
if(s.charAt(i)>='0' && s.charAt(i)<='9')
continue;
a=a+s.charAt(i);
s=a;
conf.put(key, s);
return s;
Now you need to map this UDF to any root element or dummy element of the target XML structure.
Ensure that
1. Sender Comm Channel has ASMA and file name ticked
2. Receiver Comm Channel has ASMA and file name and "fail if ASMA missing" ticked
3. in receiver communication channel -> File access parameters-> File name scheme -
> put any value say "*". This step is not compulsory.
Hope this solves your problem.
regards
Anupam

Dynamic configuration of Adpater in SAP PI

Hi,
I have a requirement where in I have to dynamically configure connection adpater in SAP PI 7.1 EHP 1, the configuration data will be pulled form database on the bases of the message content.
Thanks in advance.
Gautam

Not sure if you are lookingg for dynamic configuration as mention in the below blog..
<a href="/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping Configuration of Some Communication Channel Parameters using Message Mapping</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>
<a href="/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules Configuration In Adapter Modules</a> <a href="/people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further Configuration In Adapter Modules</a>
~SaNv...

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

Dynamic configuration bean in JMS Adapter

Hello Experts,
My scenario is JMS(Active MQ) to File.Its just Passthrough scenario and no mapping involved.
Filename will be coming in one of the JMS Property (say businessId) and I need to set this filename to file adapter.
I have refered the stefan's blog and used the Dynamic configuration bean module in sender JMS adapter.
getFilename key.1 write http://sap.com/xi/System/JMS DCJMSMessageProperty4
getFilename value.1 module.filename
setFilename key.1 read http://sap.com/xi/System/File FileName
setFilename value.1 module.filename
But required filename is not populated in the target File.Any other configuration is missing here?

Hi Karthiga
Did you set the ASMA properties in both your sender JMS channel and receiver File channel?
For the JMS adapter, as shown below, you will need to enter the DCJMSMessageProperty4 into the table
Configuring the Sender JMS Adapter - Configuring the JMS Adapter in the Integration Directory/PCK - SAP Library
If you want to set additional JMS message attributes, select Specify Additional JMS Message Properties (Maximum of 10).
In the table, enter the names of the JMS message properties whose values are to be included in the message header of the PI message.
The technical names of the additional attributes are DCJMSMessageProperty0, DCJMSMessageProperty1, ..., DCJMSMessageProperty9.
For the File adapter, you need to check the ASMA FileName attribute.
Once you have this configured, in your message, you should be able to see that the value is in the DynamicConfiguration section of the SOAP header.
Rgds
Eng Swee

Dynamic Configuration in SAP PI 7.3

Hello,
I am doing one file to file scenario in PI 7.3 (Java Stack only).
There is one requirement i.e. The output file name will change according to Development, Quality and Production. Prefix will be added to the outputput file name according to Development, Quality & production.
I am new in SAP PI . Please suggest me what to do for the above requirement.
Thanks & Regards,
Moumita

Hi Moumita,
Please find the details
1) read the source directory and based on source directory name set the file name in dynamic configuration
In sender communication channel select the ASMA parameter Directory and read the dynamic configuration as below
String devFileName = "DEV_out.txt";
String qaFileName = "QA_out.txt";
String regFileName = "Reg_out.txt";
String directory= "";
DynamicConfiguration conf1 = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","Directory");
directory= conf1.get(key1);
If (directory.equals("DEV"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFileName);
return "";
else
If (directory.equals("QA"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, qaFileName);
return "";
else
If (directory.equals("Reg"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, regFileName);
return "";
2) read the system id and based on that set the file name in dynamic configuration.
String System = System.getProperty("SAPSYSTEMNAME");
String devFileName = "DEV_out.txt";
String qaFileName = "QA_out.txt";
String regFileName = "Reg_out.txt";
If (System.equals("DEV"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, devFileName);
return "";
else
If (System.equals("QA"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, qaFileName);
return "";
else
If (System.equals("Reg"))
DynamicConfiguration conf = (DynamicConfiguration) container.getTransf
ormationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, regFileName);
return "";
regards,
Harish

Dynamic Configuration in PI 7.1

Hi,
We have this UDF working in XI 3.0, to feed file name into message mapping:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String file = ( TableName );
conf.put(key, file);
we are upgrading to 7.1 and this little thing is not working any more. Can smebody please suggest what to do to get it working in PI 7.1.
Alternatively, is there any other way to fill up 'Dynamic Configuration' in graphical mapping.
Thanks for your help!

Hi Dehra,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String file = ( TableName );
conf.put(key, file);
return file;
I will work, i hav done similr requirement in my currenct project with version PI7.1 its working fyn.
cheers,
raj

Dynamic configuration in ABAP Mapping

Dear All,
I have requirement to use the filename's name in the mapping to the target message.
e.g: Filename is Victor.303, i need to take this 303 and map it to the target message.
I understand i can get that value using dynamic configuration in Adapter-Specific Attributes.
But all the samples are using Java code used in UDF.
How to do the same in ABAP Mapping?
I tried:
   record = dynamic_configuration->get_record( namespace = 'http://sap.com/xi/XI/System/File'
                                                    name = 'FileName').
But record-value return blank.
Best Regards,
Victor.

Dear Prateek,
I changed my code with:
DATA: record TYPE mpp_dynamic.
CALL METHOD dynamic_configuration->get_record
    EXPORTING
      namespace = 'http://sap.com/xi/XI/System/File'
      name      = 'FileName'
    RECEIVING
      record    = record.
but record-value still return as blank.
I have doubt in this, do i need to populate the FileName in the dynamic configuration (in the graphical mapping) first before i can get the value in the ABAP mapping? or System should filled it and i just can use it directly in the ABAP mapping?
How we know what is the available name and namespace in that dynamic configuration-->get record??
(e.g: my case is FileName, and in the link that you gave is ERROR.)
Any link for this?
Best Regards,
Victor.

Help needed in Dynamic Configuration

Hello Gurus,
I have a requirement where in my input filename is : ABCD#XXX_YYYYMMDD_HHMMSS
I want my output filename as : VN01MMDDYY01
Where VN01 is the companycode which is in the Header field of my input file.
MMDDYY should be extracted from my input filename.
01 is static.
How do I alter my Dynamic Configuration to achieve this?Please guide me...
Thanks in advance..
Regards,
Swathi.Suresh

Hi,
VN01(From Source) >UDF>output field
try
     DynamicConfiguration conf = (DynamicConfiguration)
     container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
     DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
     String fileName = conf.get(KEY_FILENAME);
     String tmp = a + (fileName.substring(fileName.indexOf("_")+5, fileName.indexOf("_")+7)) + (fileName.substring(fileName.indexOf("_")+7, fileName.indexOf("_")+9)) + (fileName.substring(fileName.indexOf("_")+3, fileName.indexOf("_")+5)) + "01";
     return tmp;
catch (Exception e)
     e.printStackTrace();
- Gujjeti.

Get IDoc-number from flat IDoc using dynamic configuration

Dear experts
In an IDoc2File scenario I have added the IDoc-number to dynamic configuration using the folling code in an UDF:
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","DOCNUM");
conf.put(FileName, a);
The information is stored in the SOAP message
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="DOCNUM">0000000000012345</SAP:Record>
</SAP:DynamicConfiguration>
Can anybody tell me how I can access this information in the "variable substitution" section of the CC? Perhaps something like "message:docnum"?
Additional information:
Taking the IDoc-number from the payload using e.g. "payload:ORDERS05,1,IDOC,1,EDI_DC40,1,DOCNUM,1" does not work, since the XML-IDoc has been converted to an flat-IDoc.
Thanks in advance for any good ideas
Markus

Dear Rodrigo and Sarvesh
Thanks for your help so far! I applied your hints and now it is working fine.
But now I have the following additional questions
1.) My message mapping only maps the input IDoc to an output IDoc of the same type and structure. The MM is only required to process the UDF. Is there another, better solution to achieve my requirement that the IDoc-number shall be part of the filename?
2.) In the CC you have the possibility to use temporary files (section "Processing", Option "Put File" = "Use Temporary File". I think this will not work with the given solution, will it?
To possibly help somebody else or clarify the mechanism once again, I wrote down how my solution now looks like.
My UDF in the message-mapping looks like this
- Input = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- Outpt = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- UDF:
public String putDynamicConfiguration(String docnum, Container container) throws StreamTransformationException{
try
     DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
     DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
     String filename = "Prefix_" + docnum + ".txt";
     conf.put(key, filename);
     return docnum;
catch (Exception e)
     return docnum;
In the CC the settings are now as follows
File Name Scheme = . -> only a dot or something else, because this field is obligatory, even if it is not used in this case.
Variable substitution (...)
    Enable -> unchecked
Adapter-Specific Message Attributes
    Use Adapter-Specific Message Attributes -> checked
    Fail If Adapter-Specific Message Attributes Missing -> checked
    File Name -> checked
    Directory, File Type, Temporary Name Scheme for Target File Name -> unchecked
When I send an IDoc to PI and view the Adapte-Engine Version of the message (the SOAP-document, not the payload) I can find the Filename:
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">Prefix_0000000000012345.txt</SAP:Record>
</SAP:DynamicConfiguration>

Dynamically configure "required" on MessageTextInput

Similar Messages

Maybe you are looking for