Dynamically set checkbox with actionscript

I'm trying to set checkboxes to selected/unselected based on
variables pulled from a database.
Problem is when the script is run is stops at this code
(where cb is the id of a checkbox):
cb.selected = true;
The code compiles fine with no errors or warnings.
Why isn't it possible to set the selected value of checkboxes
through actionscript? Anyone have any ideas or workarounds?
Thanks in advance

Found a solution - here for anyone else who needs it:
http://www.brucephillips.name/blog/index.cfm/2006/11/16/Dynamically-Create-CheckBoxes-Thei r-Labels-And-Their-Select-Values-In-Flex

Similar Messages

Set checkbox session state using Jquery / dynamic action

Hello Folks,
I'm trying a simple dynamic action to disable & set element value upon making a radio box selection.
What I'd like is:
a) if i chose "Vendor" as "Traditional" (default value) I would like to set the "SNAP" flag as Checked and "Status" textbox to "test for static value" (SNAP flag is not set, only works on Page load)
b) if i chose "vendor" as "Isilon" then "SNAP" flag should be greyed out (disabled) and "Status" textbox should be disabled. (Working as Expected)
Link to the page:
http://apex.oracle.com/pls/apex/f?p=73069:6:0::NO:::
Workspace: wksp_chandu
Username: test
Password:test
Dynamic Action
Identification
Page:
6. Check Disable radio
*Name(Value Required)
*Sequence(Value Required)
When
*Event(Value Required)
- Select Event -
Change
Click
Double Click
Get Focus
Key Down
Key Press
Key Release
Lose Focus
Mouse Button Press
Mouse Button Release
Mouse Enter
Mouse Leave
Mouse Move Page Load
Page Unload
Resize
Resource Load
Scroll Select
After Refresh
Before Page Submit
Before Refresh
Change Order [Shuttle]
Custom
Show unsupported...
*Selection Type(Value Required)
- Select Selection Type -
Item(s)
Button
Region
DOM Object
jQuery Selector
*Item(s)(Value Required)
Condition
- No Condition -
equal to
not equal to
greater than
greater than or equal to
less than
less than or equal to
is null
is not null
in list
not in list
JavaScript expression
*Value(Value Required)
True Actions
The following actions will be fired when the 'When' condition is met, or when it is 'No Condition'.
Edit
Sequence
Action
Fire On Page Load
Selection Type
Affected Elements
10
Clear
Yes
Item(s)
P6_SNAP
P6_STATUS
20
Disable
Yes
Item(s)
P6_SNAP
P6_STATUS
Add True Action
False Actions
The following actions will be fired when the 'When' condition is not met.
Edit
Sequence
Action
Fire On Page Load
Selection Type
Affected Elements
10
Enable
Yes
Item(s)
P6_SNAP
P6_STATUS
30
Set Value
Yes
Item(s)
P6_STATUS
40
Execute JavaScript Code
No
Item(s)
P6_SNAP
Add False Action
Thanks!
Chandu

Oops...I just got it working.. Thanks for your time. I was trying to set checkbox value via javascript code and somehow that wasn't working...Finally changed the setvalue to be based on "PL SQL expression" nvl(:P6_SNAP,1)...that seem to have worked.
Thanks again !

Integrating Dynamic Adobe Form with BSP: SAP Objectives setting &Appraisal

Hi all,
My users ask me whether wecan use Adobe Form to replace SAP standard BSP appraisal form (generated by HAP_DOCUMENT).
I konw that it's possible to integrate Adobe Interactive form with BSP.
But my Adobe form must contain dynamic table, with ability to insert/delete row on the form. This is just like what's there when you can adding objectives by client scripting in SAP OSA.
Please tell me if the integration of dynamic Adobe form with BSP is possible?
(We are on ECC 6, EPH2).
Thank you so much.
Giang

Hello,
have you worked with the following document?
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e58022-2a39-2a10-69a8-c1a892e2b3f4&overridelayout=true
Did you try to develop a demo version of the form to try if it is possible to do what you need to?
Do you plan to replace "only" the standard non-Adobe form or to develop a whole custom application?
PRovide more details about the steps you´ve tried and we can solve this out. Regards, Otto

Dynamicly set y axis on graph with 0 always being in center

i have a report that i want to dynamicly set the y axis as the values change from contract to contract. but i want to maintain that 0 will always be in the center of the graph.
if i use the auto range and auto scale it shifts 0 away from the center.
any ideas?

Don't use auto range?
Sorry, I don't mean to be a smart-alec, but Crystal's charts are not very flexable. I understand they are working on it.
Debi

Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points

Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

Can't access object using "id" or "name" if created with actionscript

How can you register an instance of an object with actionscript so that it's id or name value is accessible?
I included a simple example where a Button is created using mxml and in the same way it is created using actionscript. The actionscript object is inaccessible using it's "id" and "name" property.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               creationComplete="application1_creationCompleteHandler(event)">
    <fx:Script>
        <![CDATA[
            import mx.events.FlexEvent;
            protected function application1_creationCompleteHandler(event:FlexEvent):void
                import spark.components.Button;
                var asBtn:Button = new Button();
                asBtn.label = "actionscript";
                asBtn.x = 200;
                asBtn.id = "asButton";
                asBtn.name = "asButtonName";
                addElement(asBtn);
                trace("mxmlButton="+this["mxmlButton"].label); // returns: mxml label
                //trace("mxmlButton="+this["asButton"].label); // returns runtime error: ReferenceError: Error #1069: Property asButton not found on TestId and there is no default value.
                //trace("mxmlButton="+this["asButtonName"].label); // returns runtime error: ReferenceError: Error #1069: Property asButtonName not found on TestId and there is no default value.
        ]]>
    </fx:Script>
    <s:Button
        id="mxmlButton"
        label="mxml label"
        alpha="0.8"/>
</s:Application>

Hi Dan,
It is a very rare occurrence when I miss not being able to access an object (object property, really) using the ["name"] notation for objects created using actionscript.
In MXML the compiler is conveniently adding an attribute to the class with the same name as the id, so you can conveniently refer to it using the [] notation. While we explicitly specify an application container to use, the MXML compiler creates a custom container which is a derivative of the base container and to that it adds properties for the children declared in MXML. I guess it also effectively calls "addElement" for us when the container is being constructed.
Your example assumes that using "addElement" to add the button to the application container is the same as declaring a variable (ie property ). It isn't, so there's no point in looking for an property of the name "as3Button" using the [] notation, because it doesn't exist. The container is managing a collection of children in it's display list and that's not the same as being accessible as properties of the container.
Generally speaking, accessing properties using the ["name"] syntax isn't necessary.
Paul
[edit: you may wonder why "addElement" doesn't conveniently also add the "id" attribute to be an property of the container class. Unfortunately, it can't because the container class would need to be dynamic and it's not. A further complication would be that adding properties at runtime would invite naming clashes at runtime with associated mayhem. MXML can do this because the compiler generates the class and can trap name duplication at compile time.
Great question, BTW.
-last edit changed my "attributes" to be "properties" in line with Adobe's terminology]

Dynamically set Tab current pages

Heres a quick summary of the situation Ive got.
Lets say I have an application with 4 report pages. Three display some data about rows in my database. All 3 contain the column Control # which is linked to the 4th report which displays more detailed information about that Control # object.
When I click on the Control # link and go to the 4th report, I would like the Tabs current for the 4th report to match the Tabs current of the page I came from. In other words, if I clicked on the Control # link on page 1, I would like the 4th pages current tabs to match page 1s current tabs. The same goes for pages 2 and 3.
Ive tried &(some global variable). and :(some global variable) and v(some global variable) in the Tabs current pages fields but that doesnt work.
Is it possible to do what Im trying to do?

Reports 1, 2 & 3 all exist in individual two tab pages. Pages 1 & 2 would have the same parent tab and their own sub tab. Page 3 would have its own parent tab. When in those pages the appropriate tabs are 'current'. When I click on Control # on any page and go to page 4, I would like the source pages tabs to stay 'current' when displaying page 4.
By the way, my actual application has in the neighborhood of a dozen pages which are like reports 1,2,& 3 as I described above. Rather than build a dozen identical (with the exception of current tabs) page 4's, I would rather build one page 4 and dynamically set page 4's current tab to the source page's current tab.
It's a visual reminder to the user as to which page they were on when they clicked the Control # field.
I also have 8 - 10 SVG charts which I have linked to reports. About 6 of them display the same report using different parameters. Again, I would like THAT report to have the same current tab as the source chart (chart clicked on to invoke the report).

Dynamically Set date not changing in schedule Job

Hi,
I have created a report with "Order Date" as one of the parameters on the selection screen. I have created a variant, say 'X' , to set this date parameter dynamiccaly as "Current date - 31 days".
I have scheduled this program to run in background with the 'X' variant daily at certain time.
Now, for the day on which I created this job , the Order Date is set to correct date . For ex if I am scheduling the job tdy it will be set to 06/10/08. However, for next day , that is tom this date is not getting changed. i.e Tommorrow again Order date is 06/10/08 but it should have been 07/10/08.
So basically this dynamically set date is not chaning in the scheduled job.
Any idea why this is happening and what is the corrective measure for this.
Thanks!

There is an INITIALIZATION event in the program.......
Do the processing your date in that event only....
for ex....
select-options: date for order-date.
INITIALIZATION.
date-low = sy-datum or wat ever.
Thanks
Saurabh

Dynamically Set Subreport Background Color to the Same Value as Main Report Background Color

I have a report that contains a subreport. The main report has groupings in it. I am dynamically setting the background color of the group rows based on an expression. That part is working fine. The problem that I am having is that
I don't know how to get the subreport to "inherit" the background color of the grouping that holds it.
Basically, I have different row shadings on my report differentiating the groupings except for the rows where the subreport shows.
How do I go about setting the subreport background color to equal it's contaiing grouping's background color? Thanks in advance for any and all assistance provided.

The parameter method given by gpshukla will send the info to the subreport, but you don't need the color parameter in the main report, only the subreport. The trick is in setting the value of that parameter.
Right-click the cell with the embedded subreport, you can select subreport properties.
Select Parameters and add a parameter.
The name column is the name of the parameter in the subreport (color) and value is the value to set it to.
Set name to "color" (no quotes).
Set Value to the same expression used to set the background color for the row.
In the subreport, click the design surface to select the report (not header or footer).
In the properties pane, select background color and choose expression from the dropdown.
Type =Parameters!color.Value into the expression builder.
This will work assuming that background color in the main report row will not change without also refreshing the subreport.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Dynamically set maximum row count in Interactive Report

Hi,
Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
Thanks,
Mike

Hi Mike,
You can do that with javascript
gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
any number means any number but not higher than the number you set at Maximum Rows Per Page.
You probably can mix the solution from Martin and the above code.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
Edited by: kvlek on 24-apr-2013 12:29
Edited by: kvlek on 24-apr-2013 12:35

SWF movie export on frame-by-frame basis WITH actionscript

Hi there,
I know they're two ways of exporting flash movies:
Export the whole timeline. This only allows timeline animations and gets messy because you have to cram up everything on the main timeline.
Realtime-Export via Quicktime. This is a "full blown" export, but heavily dependent on CPU power or speed of harddrive, depending on resolution.
I also work a lot with music programs and there is an option called "mixdown". This will render the whole song - as fast as the processor is capable - to a WAV-file. So time doesn't matter anymore, notes don't get skipped, etc.
I would like to see something like this in flash, too. WITH actionscript.
I just want flash to export one frame for each "onEnterFrame" event, NOT when the timer tells you, it's time for a "next frame". So this would mean not to trigger the onEnterEvent when the appropiate time has passed, but to trigger it, when the next frame can be exported.
Libraries like "TweenLite/Max" are capable of doing frame-based animations, independent from the timer, so everything on that end is pretty fine.
Would be so great if that was possible in any way.
Is it already in CS5? Or maybe an option in CS6... argh, so many years to wait...
until then, I have to measure the fps, look out for the lowest number, export at THAT framerate (in most of the cases just 4 or 5 fps, even on a very fast computer - just because 2 or 3 frames happen to render slower than the other 200) and afterwarts set it to 25 again (I use Blender to do this)

Greg-
Good Lead - Thanks.
I learned that having skinned components (which this uses)
keeps this preloader from working properly. The results were
unstable. It looks like a great little preloader for other things
though.
I also learned that it's a problem that others have
encountered and that hasnt been solved yet...
...."hello Adobe?"
Thanks again for helping me understand this.
JL

Dynamic Calc Member with Formula to Calculate a Rolling 13 Year

I have to create a rollup in my time dimension that will have 13 members representing each month of a 13 rolling forecast. I am having trouble setting this up as dynamic calc members with a formula assigned to it. For example, on of the members has the following formula.
As you can see, I am referencing several substitution variables since I want to make this as most dynamic as possible without having to make any changes to the formula member. Only making changes to the substitution variable. Any help would be much appreciated.
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jan"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Feb"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Mar"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Apr"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "May"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jun"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jul"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Aug"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Sep"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Oct"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Nov"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Dec"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF

We use similar logic but its in a calc script, not a dynamic formula.
Here's an example of what we do:
FIX (&Year, &Scenario)
IF (@ISMBR("JAN"))
"Average Usage%" = @AVG(SKIPBOTH, @MDSHIFT("Usage %"->"DEC"->&actYear, -1, "Year",), "Util %"->"JAN"->&actYear);
ELSEIF
ENDFIX
Another example in a different database:
IF (@ISMBR("JAN")) ((@MDSHIFT("Fees"->APR,-1,YEARS,)+@MDSHIFT("Fees"->MAY,-1,YEARS,)+@MDSHIFT("Fees"->JUN,-1,YEARS,)+@MDSHIFT("Fees"->JUL,-1,YEARS,)+@MDSHIFT("Fees"->AUG,-1,YEARS,)+@MDSHIFT("Fees"->SEP,-1,YEARS,)+@MDSHIFT("Fees"->OCT,-1,YEARS,)+@MDSHIFT("Fees"->NOV,-1,YEARS,)+@MDSHIFT("Fees"->DEC,-1,YEARS,)+"Fees"->JAN)/10)*12;

Dynamic queue name with JMS Queue XML?

Hi,
Is it possible to use dynamic queue name with JMS Queue XML?
I tried using a variable in the JNDI URL, and supply the value in a package. I specified the following in the JNDI URL in the Topology:
e.g.
<JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=#PROJECT_NAME.dest_var
I declared and set the variable in a package, then tried to load data from the above data server to database. But executing this package gave me the following error:
7000 : null : java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
     at com.sunopsis.jdbc.driver.bg.executeQuery(bg.java)
     at com.sunopsis.jdbc.driver.bh.executeQuery(bh.java)
     at com.sunopsis.jdbc.driver.l.f(l.java)
     at com.sunopsis.jdbc.driver.l.executeUpdate(l.java)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Am I doing it wrongly?
Thanks!

hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Change the "Font size" in a TLF Textfield with actionscript?

I could not realize how should I resize my TLF Textfiels in flash cs6 with actionscript??
None of these worked:
if (....)
     myTLFText.textSize++;
     myTLFText.fontSize++;
Error: Access of possibly undefined property size through a reference with static type fl.text:TLFTextField.
I appreciate your kind help please??

Here is the part of code I am using to resize the textfield (and other elements).
/******SET POSITION**********/
function setPosition():void
      //Position appBG
      appBG.height = stage.stageHeight;
      appBG.width = appBG.height;
      //Fit the appTXT in middle of screen (AppTXT is a MovieClip contains sourceText - RTLTextField)
      appTXT.sourceText.width = stage.stageWidth * 0.9;
      appTXT.sourceText.x = stage.stageWidth * 0.05;
      appTXT.sourceText.y = stage.stageHeight * 0.1;
      //Fit the maskText layer on top of text;
      maskText.width = appTXT.sourceText.width;
      maskText.height = stage.stageHeight * 0.8;
      maskText.x = stage.stageWidth * 0.05;
      maskText.y = stage.stageHeight * 0.1;
      //Set buttons in their proper position
      if (stage.stageWidth > stage.stageHeight)
            appBG.width = stage.stageWidth;
            appBG.height = appBG.width;
      appBG.x = stage.stageWidth / 2;
      appBG.y = stage.stageHeight / 2;
Everything works fine, but when I install the apk on my Google nexus (800x1280), the font size looks VERY SMALL and I can hardly read it!
If I increase the Font size pt (Red Arrow in above PrntScr) to 40. then it reads perfect on phones with 800x1280 screen size. Ok? But then any OTHER smaller screen cell phones will see the font TOO BIG!
So I need to set the Font size pt by CODE based on a percent of stageWidth to could solve this. thx.

How to create a dynamic table region with dynamic VO in processFormRequest

Hi All,
I have a requirement to create a dynamic table region with a dynamic VO.
I need this because at runtime only the user will select the table name. So based on that table name, i have to create a table region to display the records.
I already created a dynamic VO. Could anyone share the code for dynamic table region creation.
Thanks in Advance.
Thanks and Regards,
Myvizhi
Edited by: Myvizhi Selvi on May 20, 2013 6:21 PM

Hi,
You can use following sample code to create advance table columns dynamically with colum groups as well.
It assumes that you have already created advance table with ID EmpTblRN.
Below code returns column heading dynamically and if you keep your VO column names and attributes
same in all the cases (COL1, COL2.....) then you can easily use a loop to create advance table columns.
It is attaching VO attributes to OAMessageStyledText bean in the last.
Hope it helps.
OAAdvancedTableBean advTable = (OAAdvancedTableBean)webBean.findChildRecursive("EmpTblRN");
Serializable [] param = {currentWindowSeq.toString()};
Datum[] colHeadingArray = (Datum[])am.invokeMethod("getColumnHeading", param);
String oldGrpName = null;
String newGrpName = null;
OAColumnGroupBean columnGroup = null;
DictionaryData columnFormat = new DictionaryData();
columnFormat.put(WIDTH_KEY, "4%");
for (int i = 0; i < colHeadingArray.length; i++)
try
oracle.sql.STRUCT os = (oracle.sql.STRUCT)colHeadingArray;
Object[] colHeadAttr = os.getAttributes();
newGrpName = (String)colHeadAttr[0];
if(newGrpName!=null)
if(!newGrpName.equals(oldGrpName))
// Create a column group, create the set the column header,
// and add the column group under the advanced table
columnGroup = (OAColumnGroupBean)createWebBean(pageContext, COLUMN_GROUP_BEAN, null, "ColGroup"+i);
OASortableHeaderBean columnGroupHeader = (OASortableHeaderBean)createWebBean(pageContext, SORTABLE_HEADER_BEAN, null, "ColGroupHeader"+i);
columnGroupHeader.setText(newGrpName);
// Retrieve from message dictionary
columnGroup.setColumnHeader(columnGroupHeader);
advTable.addIndexedChild(columnGroup);
oldGrpName = newGrpName;
// Create a column, create the set the column header, and add the column
// under the column group
OAColumnBean column1 = (OAColumnBean)createWebBean(pageContext, COLUMN_BEAN, null, "Column"+i);
OASortableHeaderBean column1Header = (OASortableHeaderBean)createWebBean(pageContext, SORTABLE_HEADER_BEAN, null, "Column1Header"+i);
column1Header.setText(colHeadAttr[1].toString());
column1.setColumnHeader(column1Header);
column1.setColumnFormat(columnFormat);
columnGroup.addIndexedChild(column1);
// Create the actual leaf item under the first column
OAMessageStyledTextBean leaf1 = (OAMessageStyledTextBean)createWebBean(pageContext, MESSAGE_STYLED_TEXT_BEAN, null, "Leaf"+i);
//OARawTextBean leaf1 = (OARawTextBean)createWebBean(pageContext, RAW_TEXT_BEAN, null, "Leaf"+i);
leaf1.setViewAttributeName("Week"+(i+1));
String destination = "OA.jsp?page=/xxqc/oracle/apps/per/leaveadvance/webui/EmployeeLeaveDetailPG&personId={@PersonId}";
destination = destination + "&startDate="+colHeadAttr[1].toString()+"-"+(String)colHeadAttr[0];
destination = destination + "&addBreadCrumb=Y&retainAM=Y";
leaf1.setDestination(destination);
OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(leaf1,"Color"+(i+1));
//leaf1.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
leaf1.setAttributeValue(UIConstants.RENDERED_ATTR, cssjob);
column1.addIndexedChild(leaf1);
catch(Exception e)
System.out.println("e"+e);

Dynamically set checkbox with actionscript

Similar Messages

Maybe you are looking for