E-Mail sender verification

Hi,
I have tried to get some kind of sender verification (callout) working with my Beehive 1.4.3, but it seems that Beehive just accepts any message to any possible e-mail address, that matches the local e-mail pattern. If I send an e-mail to a non-existing account on my Beehive, this message just seems to vanish and I not even seem to get a DSN.
Anybody got this working?
Regards,
stephan

Dear B*keepers,
there seems to be a workaround for implementing rejecting unknown users using beehive 2.0 and some scripting. Oracle support has details.
After talking to my colleages, I'd like to ask you if the current default behaviour of beehive doesn't hurt SMTP RFCs: in http://www.faqs.org/rfcs/rfc1891.html we read:
"The SMTP protocol requires that an SMTP server provide notification of delivery failure, if it determines that a message cannot be delivered to one or more recipients."
Any opinions on this? We think that SMTP heavily relies on the fact that any server in the delivery chain will reliably reject undeliverable mails, even if only after a (honeypot-)delay. Oracle SMTP implementation should not differ from this by default.
Regards, Thomas

Similar Messages

  • Triing to send pictures threw e mail but it tells me I need a sender verification number. What is it

    I am triing to send pictures threw eliments 9 and it tells me I need a sender verification number. What is it and where do I find it?

    Hey,
    Just to elaborate, as you have added the email id after selecting Adobe email services. You will get an email from '[email protected]'. In this mail there will be an alphanumeric code. This is the verification code asked by Organizer. If this email is not in the inbox then check your spam folder.
    ~Andromeda

  • Sender Verification Number e-mail issue.

    I have tried to e-mail photos through adobe e-mail and the system send me a notice that I need to use a "Sender Verification Number" that has been sent to my email address.  However, when I check my e-mail there is no e-mail message.  How do I get the verification number.  Adobe does have my e-mail address on file. 

    Tried this and it still not working.  Also, Get a message that some of the  files are not photos even though they are all photos from the same camera.  Could it be that Norton 360 is causisng this?  Thanks for your help.
    From: 99jon <[email protected]>
    To: Senderverificationproblem <[email protected]>
    Sent: Sunday, November 27, 2011 2:24 PM
    Subject: Sender Verification Number e-mail issue.
    Re: Sender Verification Number e-mail issue. created by 99jon in Photoshop Elements - View the full discussion
    Open Organizer and click:
    Edit à Preferences à Sharing
    Make sure you have Adobe Email service selected
    Check the fields Your Name and Email Address and ensure you typed the details correctly.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4048934#4048934
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4048934#4048934. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Sender verification e-mail code

    How do I get my sender verification e-mail to be sent to me so I can send photo e-mail's?

    Hi,
    First off, make sure you have specified the correct email address in the preferences (Edit -> Preferences -> Sharing).
    Next, when you go to email a photo and get that message, there should be a button marked Resend E-mail - click on that button and you should get an email with the verification code.
    If you don't recieve the email, it could be that your service provider is blocking it as spam.
    Brian

  • PSE9 - having trouble with "html email sender verification" page

    We have just purchased the PSE9. This is our first venture into a photoshop program. We are wanting to send some of our pictures to friends via email. Just after we push the "share" button, to create an attachment for the email, we get this page "html email sender verification." It contains in the first blank, our email address (given), a button "resend email", and a blank entitled " Sender verification."  Below this box are the words:
    "If this email address is not correct, or you would like to use a different e mail client, you can change your email settings by clicking Cancel and then choosing
    Edit ->Preferences->sharing."
    At the bottom right are two buttons, "OK" and "Cancel"
    When we put in our email address into the "Sender verification" box,  and press "OK" the next window is entitled "HTML Email Sender Verification" .  The only words on the page for us are  in red and they say:
    "Your email could not be sent because an unkown error has occurred. Please try again."
    Then we have the option of pushing the "OK" or "Cancel" button.
    Can anyone help us get beyond this obstacle?
    THANKS!!

    You need to enter the email id in preferences. Once you put it, you will receive a verification code. You need to put this verificaiton code in the sender verification window. This is required if you are using Adobe email service. You can change the email provider from sharing preferences.

  • Mail Sender Adapter with multiple sMIME attachments

    Hi!
    I 'm using XI 3.0 SP 15.
    I have problems with my Mail-Sender-Adapter.
    The mails, I fetch, contain a certificate and multiple xml-attachments. The xml's represent an IDOC-structure (INVOIC.INVOIC02).
    The task is to first check the certificate, and then to send each of the XML attachments separately to an SAP-System.
    1) We have twelve partner which use this e-Invoicing interface. How do I administer the certificates and do I have to create for each partner a "Sendervereinbarung"?
    2)
    The second problem is, that I have multiple payloads which have to be processed separately. How can this be done?
    kind regards and thanks a lot for your help
    MArtin

    As we have multiple xml-attachments, I guess we have a major problem anyway.
    I guess Certificate verification in the sebder agreement is done after the Module Processing of the email-adapter isn't it?
    Due to the multiple attachments we have to write a customer specific Module for the email-adapter anyway.
    I guess the only way is that the module validates the certificate against the J2EE KeyStore and then extracts the various xml attachments to a file share.
    A File sender adapter then polls the file share and the sender aggreement / receiver agreement /mapping ... process starts.
    The only question is if the file adapter works also without a sender agreement, so that the xml's are stored on the file share
    Do you have an idea, if this works? or do you see any alternatives?
    thanks alot for your help!!
    MArtin

  • PSE 11 setting up email in sharing sender verification is never emailed  back to me.

    How do you set up email photos in sharing   I enter my email address and the verification code is not sent back to me for adobe email servive.

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • 550 Sender Verification Failed

    I am having trouble sending mail to some hosts.
    Can someone tell me how to allow sender verification?
    I'm on a fresh install of 10.5.8 Server.
    I believe my DNS is set up correctly and it has been well over 48 hours...
    the "sa" user has mail enabled in WGM.
    "This is the mail system at host server.agicrossmedia.com.
    I'm sorry to have to inform you that your message could not
    be delivered to one or more recipients. It's attached below.
    For further assistance, please send mail to postmaster.
    If you do so, please include this problem report. You can
    delete your own text from the attached returned message.
    The mail system
    <[email protected]>: host anotherhost.com[74.86.169.89] said:
    550-Verification failed for <[email protected]> 550-Previous (cached)
    callout verification failure 550 Sender verify failed (in reply to RCPT TO
    command)"

    I'm still getting the same problem after correcting the mx issue (now only 1 mx record for mail.agicrossmedia.com)
    Also correction the reverse DNS issue.
    Do you know of any other things I could check?
    <[email protected]>: host yellowcurve.com[74.86.169.89] said:
    550-Verification failed for <[email protected]> 550-Previous (cached)
    callout verification failure 550 Sender verify failed (in reply to RCPT TO
    command)
    Message was edited by: RGNelson

  • I can't send a photo by email.  When I try it wants a "sender Verification" which I do not have.

    I can't send an email.  When I try, it wants a "sender verification" url, but I don't have it.  I tried resend, but do not receive an email.  The email a photo part of elements appears not to work.  Seems like a very flawed program.

    The sender verification code is sent to the email id (specified by user when he selects 'Adobe mail services'). Search for your inbox (and spam folder too) for an email from [email protected] Once you have it, enter in the dialog which asks for verification code and you are good to go.
    ~Andromeda

  • I need my sender verification number so I can email photos.  It is not sending me one.

    I need my sender verifcation number so I can email photo's.  I just bought adobe photshop elements 11 and when I click on send number, it doesn't. 

    Hi Marie, I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Give it a try. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work.

    I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work. My mailbox doesn´t receive any mail.
    My account work correctly.
    please I need help.
    Thank you.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • Sender verification code

    How do I get a sender verification code PSE 11

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Give it a try. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • Status of the mail sending option using SO_NEW_DOCUMENT_ATT_SEND_API1

    Hi experts,
    I m using SO_NEW_DOCUMENT_ATT_SEND_API1 function moduel for sending mails to dealers. That is, whenver i execute a Z transaction, the customer invoice details are getting displayed in report output. At the same time, the same output data is sent as mail to the respective dealers.
    Now teh user is asking whether there is any possiblity for the end users to have a proof of the mail which is being sent from the Z transaction. If the mail is sent, the end user who executes the Z transaction (mail sending transaction) should have that mail in his/her SENT ITEMS. If the mail not reaches the dealer, then the user must identify the mail bounce identification.
    Pls tell me how to achve the same..
    Regards,
    Shanthi

    Hi,
    Yes it is possible..
    Just pass 'X' to the exporting parameter 'put_in_outbox'. The user can check the send mail in 'sost'. All the details of the mail will be there. This will be the proof that the mail was sent.
    Reg the 2nd part of your query, if the mail is not delivered to any reciepent or to particular recipient, the details will be there in the SAP outbox, that also you can see through transaction 'sost'.
    Thanks & Regards
    Rocky

  • Mail Send Functionality using SO_NEW_DOCUMENT_ATT_SEND_API1

    hi,
    i m using Fn Module "SO_NEW_DOCUMENT_ATT_SEND_API1" to send email with attachment.
    I have written  a program which will fetch data in excel format . this excel should be sent as attachment to specified receiver. however i m having difficulties adding attachment to function module.
    I specified under parameter "contents_bin" but its giving some error message related wth structure.
    I chkd SDN and wasnt able to find any resolution yet.
    Any suggestion or idea which can be useful on this.
    Thanks.

    REPORT  zsendemail                    .
    PARAMETERS: psubject(40) type c default  'Hello',
                p_email(40)   type c default 'write email address' .
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    PERFORM send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    perform initiate_mail_execute_program.
    *&      Form  POPULATE_MESSAGE_TABLE
          Adds text to email text table
    form populate_message_table.
      Append 'Email line 1' to it_message.
      Append 'Email line 2' to it_message.
      Append 'Email line 3' to it_message.
      Append 'Email line 4' to it_message.
    endform.                    " POPULATE_MESSAGE_TABLE
    *&      Form  SEND_EMAIL_MESSAGE
          Send email message
    form send_email_message.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = psubject.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
      it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    endform.                    " SEND_EMAIL_MESSAGE
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = 'X'
                        and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM

  • I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone.  It isn't in trash.  Can anyone help ?

    I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone.  It isn't in trash.  Can anyone help ?

    I get those all the time. Most annoying. I usually ignore them or mark them as spam.

Maybe you are looking for