E1000e NIC - networkmanager connects, wicd not

Hi all,
I have a problem with my Thinkpad X200 laptop and network connections. I'm using wicd, but ethernet network card is not working with wicd. In dmesg
[ 774.445067] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 781.173517] e1000e 0000:00:19.0: eth0: changing MTU from 1500 to 576
[ 781.335918] e1000e 0000:00:19.0: eth0: changing MTU from 576 to 1500
[ 781.880938] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 781.933354] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 781.934254] ADDRCONF(NETDEV_UP): eth0: link is not ready
Changing mtu with 'ifconfig eth0 mtu 1492' as suggested by some post here (iirc) doesn't help.
However networkmanager is working with no problem with ethernet network card (but has big troubles with wireless and i really hate those new not working things as policykit, hundreds of daemons just to connect to network etc).
Does anyone faced same problem? Is there any solution other than running networkmanager for connect and then disabling it?
Thanks,
merlyn

merlyn wrote:Sure, you are right, it's network, just tested with network instead of networking, but doesn't work. I've also tried adding @ and re/staring all possiblem daemons, but still no change. The same problem appears even when running dhcpcd or dhclient.
Please give more detail on your problem/the output of your trials next time. E.g. we cannot guess what the result of your manual daemon start is.. Done? Fail? Also the output of your dhcp is unclear. Does it timeout or not find an interface?
You will have seen from other threads here that the e1000e driver is not unproblematic generally.
If you just want to avoid networkmanager, another option clearly is to use network to setup the eth link. Personally I never had problems with network and another connection manager in conjunction, but there are other experiences also.

Similar Messages

[solved] [Qemu+libvirt] Can't emulate e1000 NIC cards

Hi,
I want to emulate 2 e1000 NIC cards. I'm using a virsh template file. I've tried several variantes of the following :
<interface type='bridge'>
<source bridge='br0'/>
<target dev='veth0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='bridge'>
<source bridge='br1'/>
<target dev='veth1'/>
<model type='e1000'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
I created myself veth0 and veth1 with :
# ip link add type veth (this create veth0 and veth1 in one cmd, kind of weird)
# ip link set veth0 up
# ip link set veth1 up
I also edited /etc/qemu/bridge.conf :
allow br0
allow br1
But then :
$ virsh define vm.xml
$ virsh start myvm
error: Failed to start domain myvm
error: failed to retrieve file descriptor for interface: Transport endpoint is not connected
I also tried to create myseld br0 and br1, and then attach veth0 to br0 and veth1 to br1. Same results. What's wrong in my conf ?
EDIT : changed title according to WonderWoofy suggestion.
Last edited by emasculateur (2014-05-25 20:44:24)

So I finally solved it really easily.
Instead of :
$ virsh connect qemu://system
$ virsh start myvm
I actually did :
$ virsh -c qemu:///system
This gives you a virsh CLI from which I was able to start my VM :
virsh # start myvm
I just wonder why virsh -c <domain> and virsh connect <domain> are doing two different things.

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .

Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
If it hangs other PC also, then your iPod Hardisk, maybe bad.
Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
Have a nice day!

Adobe connect could not process this document for viewing

I am using Connect 9 and trying to add a PDF to a share pod. These PDF's are sized at 11x17 and were converted from dwg files. They are 2-4 megs in size. When I add them to a share pod I get the following error:
"adobe connect could not process this document for viewing. Please try uploading the file again."
Things I have already tried:
Optimizing the PDF
Printing the dwg file to a pdf
Adding the pdf to my content library and then adding it to the share pod
Reducing the page size
Adding other PDF's to the meeting or pods work fine including larger sized files. My meeting is in 2 days and I can go with a screen share if I have too, but am working witha coulpe of novice presenters and want to make the process as easy for them as posible.
Any help is appreciated.
David

I am having the exact same issue. It would be nice if there were a link to the remedy on this disucssion thread.
EDIT: just found this - http://forums.adobe.com/message/5049521#5049521 will give it a try and see what happens.

A connection could not be established at this time

I've been trying for the last three days to order some prints --- (which I've done MANY times in the past).
Aperture appears to be uploading everything but ultimately stops and tells me "A connection could not be established at this time"
I'm fully connected (proof, you're reading this message!) and so I have no idea what's wrong.
Can't find anyone at Apple to call for help.
Any ideas?

I just had this same problem. I have spent the last 7 days working on my print order. I am running Aperture 3.3.1. There are a lot of people out there that have had this same issue. This is what I was able to determine while on the phone with Apple Print Service Support.
(1) Check the number of images you have selected for your order. I had an order with 152 images (almost 300 prints) and it failed to order. I had broken that order into another order with 101 images and it was successful. I had another order with only 74 images and it was successfull. In both success cases I had more than 152 prints made. The first was 154 and the second 165 prints. So it is not the number of prints, but the number of images.
(2) Wifi. I was informed that some people have problems with WIFI connections. I was on a hard line, or ethernet connection. So this was not my issue. I thought I would mention it because it was discussed.
(3) Close all other applications. This might help to free up resources on the computer and make the process go a little smoother.
(4) Check the Activity window. Go to Window>>Show Activity. This will open the Activity windows. If your order is not displayed in there with a status of Uploading, then the order never left the computer. This was the real issue I was having. I got this error after the order preperation was completed. I was never able to press the done button because of the error. The error also caused the upload to cancel. It is very frustrating because there were no places in Aperture to determine more regarding the error, or the status of the last order submission. Would be nice if the Activity windows showed that order as failed.
(5) Size and mixed orders. I noticed (in my second 74 image order) that with mixed order sizes it takes a lot longer to process. I had several 8x10 and 5x7 prints. As well as 4x6 and wallet images. This complex order of print sizes caused the smaller image count order to take a lot longer to go from start to finish. It would appear the 8x10s may have contributed to that because of their size.
(6) Hate to bring this up. It is not really related to the problem, but make sure you crop your images to the correct aspect ratio before ordering. I did not have this problem, but have made that mistake in the past. You cannot select an image that is formated for 4x6, print it as a 5x7 and expect it to come out normal and perfect. Crop them first. This creates another problem. The order application, tool, window (what ever it is called) does not provide indications of what the image is being displayed. Another words I have the same image as a 4x6 and 8x10. I rename the image to duplicates to have the aspect ratio in the name. However, in the order tool there is no way to view the file name. You can have two images that look very similar (5x7 and 8x10 for example) and not be able to determine which is the correct aspect ratio for the print selection. To work around this problem I had to print a contact sheet of those images as a pdf and then have it open while I entered my order. When I ran into this situation I would compare the order window image to the contact sheet and figure out a good guess for the image. At least it is better than not being able to see anything.
Hope all this helps. Hopefully something will help you get your order done. I think that both (1) and (6) are software defects in Aperture. I think that Apple should fix those issues. That does not mean that they will be investigated, but I believe this problem you are experiencing, and I did too, is a software defect.
Best Regards,
Chris

ITunes 10.0.1 "the network connection could not be made"

This was not a problem for me on 10.0. I can no longer update my podcasts because I get this error message
"There was a problem downloading (podcast name) the network connection could not be made"
so first I ran diagnostics for the network connection and it said that it could not make a secure connection to the itunes store. I clicked help and it said to add a rule to the windows firewall (even though one already existed), I did that and now its green but I still get the same error message. Here is the information from the diagnostics.
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number 0637C6B672852BC1
Current user is not an administrator.
The current local date and time is 2010-09-28 09:37:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 260M
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.1.22 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.2.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {A05144D0-DC62-4367-9AEA-8537EF0D39C9}
Description: Intel(R) 82577LC Gigabit Network Connection
IP Address: none of your business
Subnet Mask: 255.255.255.0
Default Gateway: none of your business
DHCP Enabled: Yes
DHCP Server: none of your business
Lease Obtained: Tue Sep 28 09:02:30 2010
Lease Expires: Thu Sep 30 09:02:30 2010
DNS Servers: none of your business
Adapter Name: {E8E377A7-4E43-4F3C-9BE3-9218319096C5}
Description: VirtualBox Host-Only Ethernet Adapter
IP Address: none of your business
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 09:00:00 1970
Lease Expires: Thu Jan 01 09:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Last successful store access was 2010-09-28 09:34:16.
I modified it slightly because my IP address is not necessary for troubleshooting this issue. is anyone else having the same problem? how can i fix this

Did you get anywhere with this? I'm getting the same error when I try to use Home Sharing. It worked through all the 9.x versions, but with 10.0.1, I can't even home share between two identical MacBooks. I get the above error when I try to copy a song / video / etc. from one library to another.

TS2830 Sync for IPod Touch quit working and I get error messages "a session could not be started" and "a connection could not be established" although the IPod appears in ITunes.

This is a new problem for an IPod Touch I have had for a year. The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD and I can click "sync". It goes through to Step 7 and then the error messages occur. First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod."

Maybe:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Error message: "FireWire connections are not supported. To transfer songs"

I recently purchased a Monster iCarPlay to play my ipod in my car. I have had no problems until recently. Upon disconnecting my ipod from the iCarPlay wire, I the following message popped up: "FireWire connections are not supported. To transfer songs, connect the USB cable provided." It also prompts me to click the center button to dismiss the message. However, I'vd followed these instructions, and the message does not go away. Does anyone know what I can do to resolve this problem? Or is it anything to worry about?

That is the message you see when you attach a 5th gen iPod to a computer using FIREWIRE. so... i suspect that for some reason, the 3rd party iCarPlay device must be confusing the iPod into thinking it is being docked or attached to a data line of some type and not simply charging.
As for the sudden occurrence of the message, it does seem strange however, keep in mind that you are using a 3rd party device that may not be supported or endorsed by Apple at all.
Beavis2084

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Bug (?) with Corporate Connectivity is (not) Working check

Noticed something odd. In situations where:
Direct Access client is offsite
their Internet access is via WiFi
they first have to enter their access credentials through a web-based captive portal before access is granted
then the Corporate Connectivity Check process malfunctions. Have seen cases where, after accessing the captive portal and being authenticated, Internet access works on the client. Direct Access then connects successfully. This is confirmed
on the server console, showing the client connected and the user credentials used. The client is able to access internal resources just fine (e.g. network drives on file servers).
But on the client itself, it still says Corporate Connectivity is Not Working. The WiFi icon is showing an exclamation mark. My belief is that this is caused by the client's inability to access Microsoft NCSI servers in a timely fashion.
So it looks like the corporate connectivity checks are dependent on Microsoft NCSI checks.
Can someone at Microsoft please look into this, as it is confusing our users (not to mention us guys in IT who have only just discovered this odd behaviour!).

Hi Steven !
Thanks a lot for your guidance !
After I followed the steps, I found that the time out occurs when trying to resolve the internal domain name.
The Windows Firewall was enabled on all profiles ( active on the public )
There were no IPsec sessions established in the Security associations tab, so I enabled the audit policy of the IPsec as per your instructions.
There is reoccurring error in the Security log :
Date:          10/8/2014 10:08:49 AM
Event ID:      4653
Task Category: IPsec Main Mode
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MyW8Client
Description:
An IPsec main mode negotiation failed.
Local Endpoint:
Local Principal Name: -
Network Address: MyW8Client_Ipv6 address
Keying Module Port: 500
Remote Endpoint:
Principal Name:  -
Network Address: MY_DA_Servert Ipv6 address
Keying Module Port: 500
Additional Information:
Keying Module Name: AuthIP
Authentication Method: Unknown authentication
Role:   Initiator
Impersonation State: Not enabled
Main Mode Filter ID: 180987
Failure Information:
Failure Point:  Local computer
Failure Reason:  Negotiation timed out
State:   Sent first (SA) payload
Initiator Cookie:  9e636863e513b367
Responder Cookie: 0000000000000000
As far as I understand - the connection can not be established due to certificate error, which in my case is strange since my DA configuration is set to not use computer certificates, only Kerberos.
I will keep digging but any additional tip/advice will be appreciated!
Thanks again, Steven!
P.S. Just noticed that the Event ID 4653 produce two types of "Failure Reason" - apart from "Negotiation timed out" I also get "No policy configured"

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

HT2480 whenever i connect my iphone to pc while syncing mail in itunes a pop up" the connection is not available.outlook must be online or connected to complete this action" please suggest me to solve this or bisable.

whenever i connect my iphone to pc while syncing mail in itunes a pop up" the connection is not available.outlook must be online or connected to complete this action" please suggest me to solve this or bisable.

Cached exchange mode was already marked so that was not the issue.
I have done all the usual of creating a new profile, reinstalling Outlook etc but nothing seemed to work. I also tried going back to Outlook 2007 and reinstalling Windows but same problem.
However, I am not sure if it is connected but I was useing the option in MS Live Sync to synchronise Office settings which I turned off recently and now no longer have the issue. Unfortunately I cannot remember when in the process I did this so cannot be
sure it was responsible - anyone else found this?

Error msgs in app store; network connection could not be made

Anyone else having trouble downloading apps directly from the appstore on your iPhone or iPad?
50% of the apps do not want to download. The msg I will get is that there was a problem and it will be available for download next time I connect to iTunes. And I already paid for it
Connecting to iTunes on my iMac tonight there were updates available for apps, I clicked to download them and again about 50% of the apps will not download. I now get the error msg that that app blah blah blah could not be downloaded because a network connection could not be made. Even iBooks won't download. Others download fine.
The apps I purschased on my iPad or iPhone and that did not download are nowhere to be seen.
Any insight?
cheers,
Christine

Just thought I would add that I did every test the help files suggest, no firewall etc.
Strange thing is that after the majority downloaded I had about 55 apps left that could not be updated because of the network connection that could not be made, I downloaded them manually instead of clicking 'yes please do download them all'.
I still came across a few that gave me the msg that an connection could not be made but when I skipped them and came back later to try again it did download. Took some time but I now have them all up to date.
Now see if I can sync the iPhone and iPad.
I run the latest iTunes 10.4.1 (10) and 10.6.8, have not updated to Lion yet.
cheers,
Christine

E1000e NIC - networkmanager connects, wicd not

Similar Messages

Maybe you are looking for