Ebay "plug-in failure" when using the standard pic uploader - HELP

Hi. I sell on Ebay frequently and have not been able to use their "standard picture" uploader. This feature allows you to upload multiple pictures at once, which saves time. However, whenever I try to use this feature, I get the attached error. I have uninstalled and reinstalled Adobe Flash, enabled plug ins under security preferences. I have also ran and completed a software update on my mac (safari was out of date). I have cleared cache, shut down and rebooted. I'm still getting the "failed plug-in" message. I am on Safari version Version 6.1.1 (7537.73.11) and have a MAC OS X 10.7.5. Thooughts?

I am having the exact issues:
Same day problem started, using newest flash version, also on iMac OS X 10.9.4 browser is safari. I've also uninstalled & reinstalled flash without resolve. Cannot have multiple tabs open when on broadcasting sites & youtube, as using the up/down volume both on keyboard & wireless headset produces "Plug-in Failure" message on all sites. Refreshing the page works, but cannot touch my volume without error message reappearing.
Would appreciate a solution promptly.
Nicole

Similar Messages

IPhone 4 screen wont go to sleep when using the phone. Plz help

hello
when using my cell phone the screen wont go blank. this came out of nowhere and its been happening for about a month.
i dont have a screen protector or a phone protector either. i reset the phone. restored the phone. turned it on/off about 10 times already and nothing.
plz help. thanks

The proximity sensor is above the receiver. Hard to see on the black model, but if you look at the white one, you'll see the hole in the glas they left open for it. It can't be fixed by users, get it serviced. Apple - Support - Service Answer Center

Errors & warnings when using the Admin Server Console - Help Needed

hi,
i just installed weblogic 12c and created a new domain which contains an adminServer and managedServer under
one cluster.
after finishing the installation, i started the Admin Server and afterwards started the admin server console.
and i got the next warning and errors.
the warning look like this:
<20:00:35 IST 23/03/2012> <Warning> <Munger> <BEA-2156203> <A version attribute
was not found in element "web-app" in the deployment descriptor C:\Oracle\Middle
ware\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_internal\cons
oleapp\jxhze9\console-ext\sipserver-console-ext\WEB-INF\web.xml. A version attri
bute is required, but this version of the WebLogic Server will assume that the l
atest version is used. Future versions of WebLogic Server will reject descriptor
s that do not specify the Java EE version. To eliminate this warning, add an app
ropriate "version=" to element "web-app" in the deployment descriptor.>
the errors look like this:
<20:01:51 IST 23/03/2012> <Error> <netuix> <BEA-423158> <No content found at con
tentUri = /PortalConfig/security/providers/AuthenticatorConfigCommon.portlet.>
what is the problem? anyone knows?

If you want to have an weblogic environment with one domain having server spread across different physical machines , then you will have to perform the installations of the weblogic server separately on all the machines . Also make sure that the version of the Weblogic server you are installing is same across the machines and the directory structure is also exactly same.
In short you will have to perform the below steps :
1 : install the weblogic server on all the machines with exactly same version and same dir structure .
2 : Create domain on MachineA providing all the details of the Managed Server and different machine hostnames.
3 : Start the Admin Server on machineA and then shut down it.
4 : execute the WLST pack command on MachineA creating a domain template JAR file.
5 : copy the create jar file on all the Machines ( B , C , D ) you have to distribute your domain.
6 : Execute the WLST unpack command on all the machines ( B , C , D ) .
7 : Execute the WLST nmEnroll () command on all the machines ( B, C , D ).
8 : Start the Managed Servers on all the machines ( B , C , D )

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

Why does Adobe 9 standard crash when using the digital signature

When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.

I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

Why am I getting "Plug-In Failure" when I try to upload content?

Hey friends...
As my title says I'm getting "Plug-In Failure" when I try to upload to sites I need to use for work.
This happened after I used Clean My Mac to free up some space. Evidently I removed an important Flash Player component. Since then I have removed and replaced Flash Player twice.
I'm still getting the "Plug-In Failure" on sites like Amazon.com, Ribbet.com, and Gotprint.com. It seems to only happen when I try to upload my content.
I'm running Lion/10.7.5.
Any suggestions for me?
Thanks!

Have you reset your phone? Hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
(Most folks here won't know why this is happening)

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

When using the built in web server, is there a way to specify a different

When using the built in web server, is there a way to specify a different error handler when you try to access a NON .CFM file? Right now I get the standard:
java.io.FileNotFoundException: filename.ext
Is there any setting to override this and direct the message to your own .cfm template? The missing template handler in the CF Admin work only for .cfm files.
Thx

The in-built web server for ColdFusion 8 is JRun. I am on ColdFusion 10, however, and so cannot offer hands-on advice. (CF10 replaced JRun with Tomcat.)
My guess is that you have to modify the file {CF_ROOT}/WEB-INF/web.xml. Don't forget to create a back-up first!
You may then proceed as follows.
1) In the ColdFusion root (CF_ROOT), create the file myCustomFileNotFound.cfm. Give it some content, like
My custom File Not Found page. Current time: <cfoutput>#now()#</cfoutput>
2) Open the file {CF_ROOT}/WEB-INF/web.xml in a text editor. Add the following error-handling specification just before the end tag </web-app>:
<error-page>
<error-code>404</error-code>
<location>/myCustomFileNotFound.cfm</location>
</error-page>
Save the file web.xml.
3) Restart ColdFusion. Test by browsing to a URL requesting filename.ext

Macbook Pro says plug in failure when trying to watch a movie

My Macbook Pro says plug in failure when trying to watch a movie.

This did not work and I'm glad that I only paid for the cheapest plan on macupdate.com. For other people that view this discussion, after a couple of days of trying things and then viewing a couple of other discussions, what worked for me was uninstalling my Silverlight and then reinstalling it. Thanks for everyones input !!!!

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Random Authentication Failures when using AdminConnectionFactory

Has anyone experienced this problem when using the AdminConnectionFactory to create a JMXConnector. I have a Sun ticket open on this issue, but wanted to see if anyone else had any suggestions. Ticket # is 72502922
Our application uses the Sun AdminConnectionFactory to obtain a JMXConnector object. The code is being executed in a loop at a regular frequency. There is no dynamic nature to the code. All the information required to open a connection using the AdminConnectionFactory comes from static property files. So there is no question of one call being any different than a second call.
Every so often the call to create a connection fails with the exception message:
Cannot create JMXConnector to JMS server [jmssys.putnaminv.com:7683] using username [JMXMetricsClient.User] and password [XXX]
at com.putnam.jms.jmx.JMXUtil.<init>(JMXUtil.java:146)
at com.putnam.jms.metrics.core.MetricsRetrievalJob.run(MetricsRetrievalJob.java:58)
at com.putnam.jms.metrics.core.MetricsRetrievalJob.execute(MetricsRetrievalJob.java:37)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: javax.management.JMException: Caught exception when creating JMXConnector
at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:219)
at com.putnam.jms.jmx.JMXUtil.<init>(JMXUtil.java:138)
... 4 more
Caused by: java.lang.SecurityException: JMX connector server jmxrmi: Failure detected during authentication java.security.AccessControlException: [B4043]: Connection not authenticated
at com.sun.messaging.jmq.jmsserver.management.agent.MQJMXAuthenticator.authenticate(MQJMXAuthenticator.java:125)
at javax.management.remote.rmi.RMIServerImpl.doNewClient(RMIServerImpl.java:213)
at javax.management.remote.rmi.RMIServerImpl.newClient(RMIServerImpl.java:180)
at sun.reflect.GeneratedMethodAccessor60.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:305)
at sun.rmi.transport.Transport$1.run(Transport.java:159)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2312)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:277)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:217)
... 5 more
The code to create a connection using the AdminConnectionFactory is straight forward:
JMXConnector jmxc = null;
try {
AdminConnectionFactory acf = new AdminConnectionFactory();
acf.setProperty(AdminConnectionConfiguration.imqAddress, hostname + ":" + port);
jmxc = acf.createConnection(user, password);
} catch (JMSException jmse) {
message = logMsgPrefix + "Cannot create JMXConnector to JMS server [" + hostname + ":" + port + "] using username [" + user + "] and password [" + password + "]";
log.error(message);
throw new GenericJMXException(message, jmse);
} catch (JMException jme) {
message = logMsgPrefix + "Cannot create JMXConnector to JMS server [" + hostname + ":" + port + "] using username [" + user + "] and password [" + password + "]";
log.error(message);
throw new GenericJMXException(message, jme);
What is causing this connection creation to fail. The same application will work just fine a few minutes later.
Thanks
Aspi Engineer
Putnam Investments

Thank you for the response.
Bug 6906978 is a defect that shows itself under high concurrency situations. In our case, we have a single quart based timer that is being triggered every 2 minutes to open a JMX connector. So my guess is that bug 6906978 and the problem that we have been experiencing are two different things.
But I am willing to try out 4.4U1P1. Any idea where I can download it from?
- Aspi

Ebay "plug-in failure" when using the standard pic uploader - HELP

Similar Messages

Maybe you are looking for