ECP &sales pricing issue

Hi
i have use ECP , plan cost on WBS
i am getting one Run time error while am doing sales pricing from cj20n..
INPUT error , DLI not found
pls help
Thanks

Hi,
The service Mat that you used in ODP1(DIP Prof customising) is not maintained properly for Sales organisation that you are using.Please check and use some other service material in Mat determination in DIP Profile and also create sets and use them in ODP1.
There is one SAP note for DIP Profile customisation please go through that.
Regards
Muzamil

Similar Messages

Pricing issue in sales order

Hi All,
We are facing pricing issue for few sales orders.
The pricing is being carried for line items even though there is valid condition record exist at pricing date of line items .
For example we are creating order on 26.10.2010 and Requested delivery date is 01.01.2011.
The pricing date at line tem is 01.01.2011 and condition record is valid only till 31.12.2010.
Still pricing is carried for line item and it is not for all the sales orders .
So could please advice how to overcome this kind of errors?
Thanks in advance

Hi All,
We are again facing pricing issue in sales order,the pricing date of line item is not in synchronization with the condition record validity date.
Due to that incorrect pricing is being carried out .
But when we do repricing the error is getting fixed.
So could you please let us what could be the root cause for this error ?
This is not happening for all the orders,for only few orders it happens.
If we create new order for same sold to ,sales doc type the error is not occuring.
Thanks,
Praveen

ECP with network activities and sales pricing

Hi experts,
Currently I have configured the system so that I can plan costs by assigning Easy Cost Planning templates to network activities and WBS elements. However, when I try to create quotation (sales pricing) from Project Builder (CJ20N), the planned costs of ECP templates assigned to network activities does not appear, only the planned costs of ECP directly assigned WBS element appears.
Thanks in advance.
Hieu Nguyen

After extensive testing, I believe doing sales pricing from Project Builder would not work correctly when using ECP with network activity. Sales pricing from Project Builder will only work properly if ECP only assigned to WBS element.
If you need to use ECP with network activities, you would need to use DP82 to do the sales pricing.
Regards,

Consignment Sales - Pricing Procedure

Dear Experts,
is pricing procedure of Consignment Sales difference than Normal Sales. if somebody can provide a expert opinion and any note url link for Consignment Sales Pricing Procedure.

Hi,
Pricing Procedure will be same for CONSIGNMENT Process and Normal Process.
In the CONSIGNMENT based on the flow, for some scenarios the pricing is not required.
This can be controlled in the OVKK transaction
In Consignment goods are goods which are stored at the customer location but which are owned by the company. The customer is not obliged to pay for these goods until they remove them from consignment stock. Otherwise, the customer can usually return consignment goods that are not required.
Consignment Fill-Up: Consignment fill-up replenishes the stock at the customer site. Since the goods remain the property of the company, this process is not relevant for pricing and consequently not for invoicing either.
No Invoice triggered in this scenarios
Consignment Issue: The Consignment issue enables the customer to withdraw consignment goods from the special stock that are to be used or sold.
Since the goods are moved from the customer stock, Invoice will be generated to Bill customer
Consignment returns: Consignment returns enable your customer to return goods to the consignment stock that has already been issued from it.
In this process, we have to credit the customer
Consignment Pick-Up: The company uses consignment pick-up to take back consignment goods that are faulty or excess materials that the customer does not need. This process is not relevant for billing since the goods remain the property of the company.
please revert bakc if you frther details,
thanks,
santosh

Sales Pricing- Condition record

Hi
We have so many condition records
but while doing sales pricing through ECP, why only few condition record is coming!!
is there any configuartion missing?
from where these condition type are getting selected??
Pls help
Thanks
Edited by: shailesh kumar on May 18, 2009 3:01 PM

Hi,
The base price is coming from VK11.Other conditions are calculated on the basis of calcaulations as per the Pricing Procedure.Please check with your SD consultant about this.
Muzamil

Sales Pricing without Inquiry using detailed Cost element Planning

Deal All,
I need to use use Sales Pricing without Customer Inquiry to Genrate Quatation from Project.
In my project client is asking to use deatiles cost element planning for same. So, let me know
Weather its possible to use Detailed cost element planning for doing Sales pricing in DP82
or Do we need to use ECP only to do Sales Pricing??
Also, let me know if there will be any change in RA method also.
regards,
Atul

Hi Atul,
You can use any of the cost planning method (i.e Details cost element planning, ECP or Network Costing) to create Quotation using DIP Profile.
Coming to the second point..any effect on RA calculation..This Quotation creation process is no where effects RA calculation.
basically for creating Quotation usign DIP Profile, there should be cost element wise planned cost required.
Hope this clears you...
regards,
Hari.

Sales pricing wihtout Inquiry ..

Hello Everyone
In order to do sales pricing without inquiry i am follwing below steps:
1- Creating Project and calculate estimated cost through ECP.
2- Configure DIP profile with ECP source and assign it to project
3- Run sales Pricing button.
Everything goes well but when i press sales pricing button, it is giving me error message that " NO ORDERING PARTY EXIST IN PROJECT XX-XXX". Can anyone suggest where i have to update ordering party as i have searched PS forum thread already ?

You have to define partner determination procedure, then assign it to project profile. Now when you create project you will find a new, partner tab in project definition. There you have to assign the customer/ordering party to the project.

Code help in writing a Program which resolves the pricing issues

Hello experts
i was asked to write a report program with the following requirements,(This is to address the pricing issues KSE(company code A ) is facing with KST(another company code B) for S-Bank program(an important program we use it in SD)
cananyone help with the code.? atlease a skeleton to start the program is highly appreciated.
Thanks
SP
Selection Parameters
Material
Sold to party
Sales Org
Plant
Sales order
Actual goods movement dates
Invoice number
Sales order
Report
-Should detail only the Sbank scopes (all FERTs beginning with S*)
-Detail by line items
     -Material number
     -Serial number of device shipped
-Serial number from SBANK_SERIAL_NUMBER characteristic in KSE_SN_ENDOSCOPES class contained in name plate data
     -Delivery number
     -Invoice number
     -Invoice price
     -Notification number
     -KST Repair level (coding field in notification)
     -KSE Repair level (activity code text from KSE-SM07 code group)
Thanks
SP

http://java.sun.com/developer/onlineTraining/JavaMail/

Sales pricing procedure

Hi,
In 000 client i have checked sales pricing procedure jinfact where for all tax components accounting key exd has been given is there any special purpose for doing like this.
And also i want to know how to copy the same to 800 client.
thanks in advance.
SAP_CIN

Hi,
scc1 is used to copy users from one client to another
while sccl is used to copy data from one client to another
Regards,
Srinivas Muthyala

Use of MM condition type into Sales Pricing

Dear All
I am having two MM Condition types in STO pricing procedure which are statistical in nature. Condition type A is having condition category G (Cost) and B is having H (Base Price). I have created both the condition types in SD side using V/06 with dummy access sequence without maintaining condition record. Condition type having contion category G is getting populated in sales pricing automatically but second condition type having condition category H is not getting populated automatically from the MM condition records which was maintained in the MM side using MEK1.
Please advice whether I can populate the above condition records automatically from the MM side. If yes, then please guide me with steps to achieve the above requirement.
Thanks in advance....
Regards
Animesh
Edited by: Lakshmipathi on Oct 11, 2011 10:30 PM
Thread Locked as duplicate post is not allowed

Dear Shiva
Thanks for u'r prompt reply.
I will try the same as advised by you and confirm.
Regards
Animesh

Production cost for MTO in Sales Pricing

Hi All,
For Make-To-Stock items the material standard cost comes from Accounting view of material master as VPRS in Sales Pricing (provided we include that condition type). Now how do I get the production cost for Make-To-Order items in Sales Pricing. Please elaborate the process.
Thanks in advance.

In the first Accessof the Access sequence 0016 for Additionals (specified for the condition type KAD0) , under the fields - there is a field called Doc. Field. When I changes this field through a ADDNR to MATNR - then the condition record is properly picked and KAD0 condition is filled with the cost and then used accordingly in the calculation schema.
However this looks only like a workaround.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

BW sales load issue

I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.

Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan.

T code/ report to list all material sales pricing condition with deletion i

I create sales org/ material level pricing conditions in VK11. Some unwanted material pricing conditions are with Deletion indicator active. Iu2019m looking for a report to list all material sales pricing condition with deletion indicator active.
Please advice me on this.

Hi Goto v/ld and select 16 which stands for individual prices, and then populate sales organization, distribution channel, customer ,material numbers,etc...and tick "Cond.marked for deletion" check box in "list screen" tab which is the most important, execute you will be able to see all material pricing condition even though it had been deleted.

Want to updated sales pricing procedure through quotation

Hello Friends,
In general scenario: we update any condition type in vk11 tcode and tht is reflected in quotation pricing.
my requirement : while creating quotation if the user changes any price for any condition tht should automatically get updated in pricing procedure for tht particular condition type.
pls suggest how it is possible??
Regards,
Sunny

Hi Sunny,
you can write exit in VA21 to update the sales pricing .
Thanks & Regards,
Devalla T Kumar

ECP &sales pricing issue

Similar Messages

Maybe you are looking for