EDIFACT has a space missing

Hi all..
If in my XI mapping output, I have a empty node then in the BIC mapping output i want a <SPACE> to come.
For example if XI mapping is like this:
<A1>200</A1>
<A2/>
Then i want the BIC output to be like
200: ' where ' is the segment delimeter
instead it is coming like 200'
any idea how to change the properties so that we get the desired output?

Hi,
You are right BIC mapping  trims the content by default
for e.g check the condition used for mapping from source to target
if existsourceField("LIST.S_ISA.D_I04:value") && trim(LIST.S_ISA.D_I04:value) != ""
   copy LIST.S_ISA.D_I04:value to ISA:I04;
else
   copy "" to ISA:I04;
endif
in order to populate the space value you need to change your BIC mapping accordingly.. i.e removal of trim value ..soon..
HTH
Rajesh

Similar Messages

  • Hard drive space missing?

    There seems to be hard drive space missing on my yoga 13.
    The C: drive had a capacity of 97,2 gb and the D: drive has a capacity of 3,99 gb, which adds up to just over 100 gb. But the computer is supposed to come with a 128 gb SSD - where is the rest of the capacity?

    I found the extra four partitions, and am not hard over the extra 20G. I see (from other posts) where the partitions belong to. But a question I asked on another thread (New-to-Yoga-11s-How-to-start), perhaps not as eloquent; should I use the OKR HOTFIX? Will it give me some of the 20G back? Will it mess with the OKR system?

  • Calendar month view has wasted space between months, can I remove? iOS 7 iPhone

    The calendar month view (both iPad and iPhone) has a gap between months eg: Jan 31 has two spaces &amp; almost a whole line blank before Feb 1. I want the months to run sequential with no gaps. Any way of doing this?

    Use a different app.
    Unfortunately, there is no way to change the formatting of the built in app. Your only option is to look for a different calendar app and see if it meets your needs

  • My C: drive is 4GB SSD & has no space. How do I install adobe reader on D: drive?

    My C: drive is 4GB SSD & has no space. How do I install adobe reader on D: drive?

    Download Reader 11 offline installer from below link
    http://get.adobe.com/reader/enterprise/
    and then launch installer by double click on exe.
    You will see 3 buttons on Install UI and the first button is "Change Destination Folder"
    By clicking on it, you can change the install location.
    I hope this helps.

  • Bad File Descriptor in /dev/fd/3, and 94Gb of disk space missing

    I noticed a few days ago, possibly as the result of a recent kernel panic, that I have a large chunk of hard drive space missing. The Finder reports that I have approximately 89Gb of free space, but using "df" reports that there is approximately 178Gb free. Using "du" doesn't report any unexpected huge files, so I tried running GrandPerspective. In addition to the usual file usage and free space, this shows a single 94Gb block of "miscellaneous used space".
    I then booted into Single User mode to run fsck on the startup drive. This reported several errors, and took 3 passes to repair the directory structure, but didn't recover the missing space. I have subsequently run TechTool Pro and DiskWarrior on the startup drive (both of which found various minor errors), but the 94Gb still refuses to show itself.
    I then tried using "find" to look for single large files, using "sudo find / -size +94371840" (anything larger than 90Gb), and I get the following errors:
    find: /dev/fd/3: Bad file descriptor
    find: /dev/fd/4: Not a directory
    find: /dev/fd/5: Not a directory
    After searching Google, a "Bad file descriptor" error points to an inode issue, that fsck cannot fix, but I don't know enough (read: anything) about inodes to risk running the clri command to zero the problem inode.
    Short of blanking the startup disk and installing from scratch (not an attractive option), is there anything I can do to fix the broken inode and recover the missing space?
    Any help appreciated.

    Drawing Business wrote:
    I then tried using "find" to look for single large files, using "sudo find / -size +94371840" (anything larger than 90Gb), and I get the following errors:
    find: /dev/fd/3: Bad file descriptor
    find: /dev/fd/4: Not a directory
    find: /dev/fd/5: Not a directory
    This is not an error and always happens with find unless you exclude the /dev hierarchy from the search. (Interestingly this seems to have gone away with 10.5??)
    To locate your missing space, try WhatSize. Another alternative which I have not used personally is Disk Inventory X.
    As an additional point, with 10.4 it is actually better to use Disk Utility, since it does more than fsck: Resolve startup issues and perform disk maintenance with Disk Utility and fsck, quote:
    Note: If you're using Mac OS X 10.4 or later, you should use Disk Utility instead of fsck, whenever possible.

  • How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

    how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

    if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

  • Problem using a group which has a space in it's DN when using LDAP Group mappings in UCS 1.4

    Hey,
    We've been implementing LDAP authentication (Active Directory) using LDAP group mapping in UCS 1.4, and we've noticed that when using a group which has a DN with a space in it (such as "UCS Admins") it wouldn't authenticate the user with the appropriate role.
    Using a DN without spaces (such as "UCSAdmins"), works just fine.
    I should mention that having a base DN with spaces works just fine as well, it's just the group mappings that doesn't work.
    I should also mention that Cisco's "Quick guide to configuring ldap for ucs 1.4" shows an example in which the group's DN doesn't include a space.
    Is there a workaround available which can make it possible using a group which has a space in it's name?
    Thanks,
    Dor

    Hey Roman,
    Thanks for your prompt reply.
    We've tried putting quotes using UCSM which is not possible at all - not for the entire entry nor for the part with spaces.
    We've also tried using CLI ("scope security/ldap/ldap-group") where you have to put quotes if you use a DN with spaces, and it still doesn't work. Furthermore, we tried adding quotes only to the part with the spaces, i.e. - CN="UCS Admins",OU=TEST,DC=TEST. It adds the entry without an error, but shows like we would use "CN=UCS Admins,OU=TEST,DC=TEST". Anyway, it doesn't work either.
    Thanks again,
    Dor

  • My ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

    my ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

    To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

  • TOC run-in has no spaces, how can i fix this?

    TOC run-in has no spaces - Under the TOC's "Run-in" option, it says that "A semicolon followed by a space (; ) separates the entries." but I keep getting the entries with only a (;) and no space.

    Your media file (the .mp3 file) is hosted on Google Drive. The URL begins with https, which indicates an encrypted connection, and the iTunes Store cannot handle these, so you need it to begin with http.
    Even so, when I tried to play it in a browser (where https would be OK) it didn't play, and when I subscribed to the feed in iTunes it complained that the file 'needed authorisation' - so you seem to have placed it where your login is required to access it.
    I don't know anything about Google Drive, but does it in fact provide website hosting? I rather doubt it's a good place to host your media, but if you are going to do this you need to make sure it's publicly accessible and uses http.
    Also, it won't be accepted if the server does not handle 'byte range requests'  - the method used by iPhones - so once you've got the access sorted out, and before you try submitting it again, you could if you like post here again and I'll run a check for byte range request handling (which isn't 100% authoritative but at least would give some idea).
    When you do resbumit, be prepared to be told it's already been submitted - this is a bug in the process, to get round which you would need to change the title slightly.

  • How do i create more room on my phone if my computer has no space for back up?

    how do i create more room on my phone if my computer has no space for back up?

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Get an external hard drive on which to store some of your files after which you can
          erase the data from your internal drive to free up space.
      5. Also see Freeing space on your Mac OS X startup disk.
      6. See Where did my Disk Space go?.
      7. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    On your device you can try restoring it as New.

  • Could you please tell me how to delete a bookmark on the top of page (it has a space for four bookmarks). Thanks

    Could you please tell me how to delete a bookmark on the top of page (it has a space for four bookmarks). Thanks

    To delete a bookmark from your bookmark toolbar, point at the bookmark with your mouse or trackpad, then right-click on it (press the right-hand button on your mouse or trackpad) and choose "Delete" from the pop-up menu.
    For other ways of deleting bookmarks, see '''[[Deleting Bookmarks]]'''.

  • Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    @Satterp
    Not sure if you were responding to me or OP - my iPhone is on 5.1.  The OP at the time of writing was on 5.0.1.
    Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

  • My phone has no space

    i have an iphone 4 at is has no space because of "other" how can i fix it?

    Other data
    Should only be about 1GB and larger than this may indicate corrupt data
    Read http://www.maclife.com/article/howtos/how_remove_other_data_your_iphone
    https://discussions.apple.com/thread/4542883?start=0&tstart=0
    To get rid of it you need to Restore
    Restoring  http://support.apple.com/kb/HT1414

  • I've updated my iPhone 3gs with IOS 6 but being only 8GB it now has no space for data. Can I go back to IOS 5.1?

    I've updated my iPhone 3gs with IOS 6 but being only 8GB it now has no space for data!
    Can I restore back to IOS 5.1?

    It sounds like you have a hacked/unofficially unlocked iphone.  When you update, it will indeed lock it back, as it should.
    The ONLY place that can legitimately unlock an iphone is the carrier to which they are locked and no U.S. carrier does this.

  • HT1459 I purchase an iPod shuffle for my niece and nephew last year for Christmas.  My nephew's iPod has come up missing and I have reason to believe it was stolen.  I  used my iTunes to put music on it in the beginning can I find the serial number somewh

    I purchased an iPod shuffle for my niece and nephew last year for Christmas.  My nephew's has come up missing and I have strong reason to believe it was stolen.  Amazon cannot give me the serial number and I used my iTunes to put music on it initially.  Is there a place I can find the serial number on my iTunes and can it be tracked to different computers if someone else is using it?  My nephew no longer has the packaging.

    Type "ipod serial number" into the search bar at the top of this page by Support and read the article explaining how to find the serial number.

Maybe you are looking for

  • Trying to play video on a web site and I get the Quick Time logo with a ?

    What have I done. Please give me instructions to set Quick Time so it will work. I also got a Registration screen. I read the thread on how to get around that but I didn't understand the abbreviations that someone wrote. App? is that applications and

  • Gray box for logo generating pdf from fm book

    Greetings, I have a large FrameMaker book that I've generated pdfs from a million times. We cleaned up our logo, so I dropped it in and tried to generate the usual pdf. a gray box resulted for the logo only. all other artwork displayed fine. i tried

  • How to Attach Documents to QM02 Transaction

    Hi, We have a requirement to implement a RFC(Portal to R/3) which is used to attach the documents at the Header level of the Quality Notification(QM02). The input paremeters are the file content and file format. File content will be in the form of By

  • TC Port Forwarding Static IP Address

    I have a domain for which I've pointed the DNS to my static IP address. My network flow is as follows: Internet --> Westell DSL Modem (AT&T) --> TC. I'd like TC to forward port 80 requests to a Mac Mini. On the Mini Web sharing is enabled. From any m

  • To escalate or not to escalate

    We have a situation where we determine the agent for a workflow using a rule but if the rule fails to find an agent a default user is then read from a custom table. When the default user is used as the agent we do not want the normal escalation proce