Edit email for submit button and Javascript?

How can I change an email address attached to a submit button on a previously created form? 2) How can I see if JavaScript is being used with form? A prior team member created interactive forms with a submit button. Email address attached to button needs to be updated. I tried to edit in Acrobat Pro by double clicking the button to access the properties panel, but it doesn't open. If I recreate the form to amend the address, my file size is about 1/3 of the original which leads me to believe there is JavaScript.

Thank you. My version of Adobe Acrobat Pro X Tools- Forms edits in
LiveCycle Designer after the form has been created and saved.. There is no
other edit option as shown in the screen print below. The action wizard in
Pro doesn't seem to apply in this case. I had tried right clicking the
button in both Pro and LiveCycle previously to no avail. However, when the
form opens in LiveCycle, I just figured out that there is an object window
that allowed me to modify the email address.
However, I don't understand the file size difference or even how to find
the JS. We both used the same original word docx. His file size is 47K and
my recreated file is 19K, a big difference. I didn't compress mine. Any
thoughts on what is causing the difference? The forms are on a client's
website for external users to complete so load time is still important.
Thanks,Vickie
On Fri, May 23, 2014 at 4:24 AM, Gilad D (try67)

Similar Messages

Adobe Acrobat X Pro - Javascript for submit button

Hi,
I am new to Adobe Acrobat X Pro and I have just designed a fillable form and enabled user rights for reader, for them to send the form back as a PDF. I created the form with a submit button and have mailto:[email protected] but I want to know if it is possible to create a button that will run a javascript to bring up a persons Mircosoft Outlook contacts, so they can choose who they want to send the completed form too.
Any help would be greatly appreciated.
Thanks.

See post #7 and #10 in the following topic: http://forums.adobe.com/thread/793083?tstart=0

When i placed a AccessKey to Submit Button (Eg: AccessKey="S"), and pressed Shift + Alt + S, the focus is going to Submit button and as well as Submit operation is also performed. Is this the expected behaviour in FireFox for AccessKeys

When i placed a AccessKey to Submit Button (Eg: AccessKey="S"), and pressed Shift + Alt + S, the focus is going to Submit button and as well as Submit operation is also performed. Is this the expected behaviour in FireFox for AccessKeys

What were you expecting when using an accesskey?
I use that also on this forum to submit my posts:
<pre><nowiki><input accesskey="s" class="btn btn-important" value="Post Reply" type="submit">
</nowiki></pre>

I was online earlier this week and liked the forms with submit buttons and the Adobe site directed me to upgrade to Adobe PRO XI in order to use forms so I bought five licenses. Just had it installed today and it is now asking me to sign up for forms Cent

I was online earlier this week and liked the forms with submit buttons and the Adobe site directed me to upgrade to Adobe PRO XI in order to use forms so I bought five licenses. Just had it installed today and it is now asking me to sign up for forms Central in order to use this feature. What gives? The Adobe site gave me the impression that I would have this feature after purchasing the new upgrade. I would not have purchased the upgrade, let alone five of them had I know this. Am I missing something?

Acrobat XI comes with the Fromscentral AIR application and the ability to create PDF forms authored in Formscentral. To have more than the free (1 form with 50 responses) level account you need to sign up for a Formscentral subscription.
Andrew

How do i add and email based submit button to a form

how do i add and email based submit button to a form

See this: http://help.adobe.com/en_US/acrobat/using/WSBB6EF75F-BC3D-4094-B787-FB76DAE1EBDC.w.html

How can i disable a submit button and execute submit_action method on click

Good Day,
On my page I have a submit button that execute the submit_action method of the page backing bean that submit data captured on the page into a database and activate another class that send mail at the same time on a click of the submit button,the mail process takes a while before returning back to the page.I was able to disable the submit button to prevent the user from keep click while the process is running but the issue is on clicking the submit button it only disable the submit button without executing the submit_action method of the page backing bean.How can i disable the submit button and execute submit_method of the backing bean at the same time.
Thanks in advance.

I tried this out on one of my pages to see if it works.
First, I added the following JavaScript to my submit button's onClick event:
this.disabled=true; return true;When I clicked the submit button, it was disabled but the form was not submitted.
I deleted the JavaScript from the onClick event and added the following JavaScript to the form's onSubmit event:
var button = document.getElementById("form1:submitButton"); button.disabled=true; return true;When I click the submit button, it was disabled and the form was submitted but the button's action method was not called.
The next thing I tried was to change the onSubmit event code:
var button = document.getElementById("form1:submitButton"); setTimeout("button.disabled=true", 500); return true;This seemed to work. The difference was that I added a 1/2 second delay before disabling the button.
See if that works for you. If not then I'm fresh out of ideas.

SUBMIT button and VALUE clause

I have a jsp screen like below.It shows in a tabular form all the employee data.
EMPLOYEE DETAILS
EmpId_______ProcessEmpSalary_____ProcessEmpLeave
1
2
3
4
5
6
7
8
NEXT______PREV____LAST____FIRST
Under ProcessEmpSalary ,ProcessEmpLeave of each employee I have a submit button and clicking on it the particular employee id has to be processed (for salary or leave).Now I want the employee id to be passed when the submit button of that particular employee is pressed.
So what I am doing is I put the emp id in the value clause and achieve my purpose.But this results in the display of the emp id over each submit button.It looks ugly and so
I dont want to use the VALUE clause of the SUBMIT button.........
So friends please tell me how to achieve it.Someone suggested me to use IMAGE but it doesn't work.Some suggested I use hidden varaible ,but I just don;t understand how is that possible.Some suggested me use javascript to pass the value and throw the form...this make sense but problem is I don't have time to learn javascript now.So please help with some code example how to achieve this result.

Here is my jsp as it is .Employee id was used for example.In my application it is Submission_Id
which is used as the key.
Note:
The method is given below after the end of this JSP code.
SubmissionList.jsp
<%@ page contentType="text/html;charset=WINDOWS-1252"%>
<%@page import = "oracle.portal.provider.v1.*, oracle.portal.provider.v1.http.*, oracle.portal.utils.v1.*, java.sql.*, ccrspackage.*" %>
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=WINDOWS-1252">
<META NAME="GENERATOR" CONTENT="Oracle JDeveloper">
<TITLE>
</TITLE>
</HEAD>
<BODY BGCOLOR = #FFCC00 FONT SIZE = "+2" >
<FORM ACTION = 'SubmissionList.jsp' method='post'>
<%
//retrieve the existing session
HttpSession Session= request.getSession(true);
CCRS OCCRS = null;
Connect OConnect = null;
try
if (request.getMethod().equals("POST"))
if ( request.getParameter("Exit") != null)
response.sendRedirect("Default.jsp");
else
OCCRS = (CCRS)Session.getValue("OCCRS");
if (request.getParameter("Search") != null)
OCCRS.InitialSettingForSubmissionList();
else
OCCRS.CreatePageOfSubmissionList(request);
else
OConnect = (Connect)Session.getValue("OConnect");
OCCRS = new CCRS(OConnect);
OCCRS.InitialSettingForSubmissionList();
Session.putValue("OCCRS",OCCRS);
catch (Exception e)
OCCRS.ProcessError(e);
//MESSAGE (IF ANY)
out.println("<TABLE ALIGN=CENTER>");
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = RED>");
out.println("<B>");
out.println(OCCRS.GetDisplayMessage());
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("</TR>");
out.println("</TABLE>");
if (OCCRS.GetShowRecord() == false)
String TempValue = "";
String TempSelected = "";
String TempText = "";
out.println("<TABLE ALIGN=CENTER>");
//Show all the drop down list
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = BLACK>");
out.println("<B>");
out.println("Fiscal Year");
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("<TD>");
out.println("<SELECT name = 'Fiscal_Year' >");
while (OCCRS.NextItrScrFiscal_Year())
TempValue = OCCRS.GetItrScrFiscal_Year();
TempSelected = OCCRS.GetItrSelectedScrFiscal_Year();
out.println("<OPTION value = '" + TempValue + "' " + TempSelected + " >" + TempValue + "</OPTION>");
out.println("</SELECT>");
out.println("</TD>");
out.println("</TR>");
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = BLACK>");
out.println("<B>");
out.println("Fiscal Period");
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("<TD>");
out.println("<SELECT name = 'Fiscal_Period' >");
while (OCCRS.NextItrScrFiscal_Period())
TempValue = OCCRS.GetItrScrFiscal_Period();
TempSelected = OCCRS.GetItrSelectedScrFiscal_Period();
out.println("<OPTION value = '" + TempValue + "' " + TempSelected + " >" + TempValue + "</OPTION>");
out.println("</SELECT>");
out.println("</TD>");
out.println("</TR>");
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = BLACK>");
out.println("<B>");
out.println("Province");
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("<TD>");
out.println("<SELECT name = 'Province_Code' >");
while (OCCRS.NextItrScrProvince_Code())
TempValue = OCCRS.GetItrScrProvince_Code();
TempSelected = OCCRS.GetItrSelectedScrProvince_Code();
TempText = OCCRS.GetItrScrProvince_Desc();
out.println("<OPTION value = '" + TempValue + "' " + TempSelected + " >" + TempText + "</OPTION>");
out.println("</SELECT>");
out.println("</TD>");
out.println("</TR>");
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = BLACK>");
out.println("<B>");
out.println("Facility");
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("<TD>");
out.println("<SELECT name = 'Facility_Code' >");
while (OCCRS.NextItrScrFacility_Code())
TempValue = OCCRS.GetItrScrFacility_Code();
TempSelected = OCCRS.GetItrSelectedScrFacility_Code();
TempText = OCCRS.GetItrScrFacility_Name();
out.println("<OPTION value = '" + TempValue + "' " + TempSelected + " >" + TempText + " " + TempValue + "</OPTION>");
out.println("</SELECT>");
out.println("</TD>");
out.println("</TR>");
out.println("<TR>");
out.println("<TD>");
out.println("<FONT COLOR = BLACK>");
out.println("<B>");
out.println("Status Code");
out.println("</B>");
out.println("</FONT>");
out.println("</TD>");
out.println("<TD>");
out.println("<SELECT name = 'Status_Code' >");
while (OCCRS.NextItrScrStatus_Code())
TempValue = OCCRS.GetItrScrStatus_Code();
TempSelected = OCCRS.GetItrSelectedScrStatus_Code();
TempText = OCCRS.GetItrScrStatusDesc();
out.println("<OPTION value = '" + TempValue + "' " + TempSelected + " >" + TempText + "</OPTION>");
out.println("</SELECT>");
out.println("</TD>");
out.println("</TR>");
out.println("</TABLE>");
// SHOW 2 SUBMIT BUTTONS ,"Next" and "Close"
out.println("<TABLE ALIGN = 'CENTER'>");
out.println("<TR>");
out.println("<TD ALIGN=CENTER>");
out.println("<INPUT TYPE = 'SUBMIT' NAME = 'ShowRecord' value ='ShowRecord'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'Exit' value ='Exit'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("</TR>");
out.println("</TABLE>");
else
out.println("<TABLE ALIGN=CENTER>");
//THE COLUMN NAME IS SHOWN
for(int Row = 0;Row <= OCCRS.GetFilledRow();Row++)
if (Row == 0)
out.println("<TR BGCOLOR = 'Black' >");
else
out.println("<TR BGCOLOR = 'Teal' >");
for(int Col = 0;Col <= OCCRS.GetFilledCol();Col++)
out.println("<TD>");
out.println("<B>");
out.println("<FONT COLOR = WHITE >");
out.println(OCCRS.ReturnNewPageElement(Row,Col));
out.println("</FONT>");
out.println("</B>");
out.println("</TD>");
out.println("</TR >");
out.println("</TABLE>");
out.println("<TABLE ALIGN = 'CENTER'>");
out.println("<TR>");
if (OCCRS.GetMoreRecExist())
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'Next' value ='Next'>");
out.println("</INPUT>");
out.println("</TD>");
if (OCCRS.GetPageNumber() > 0)
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'Prev' value ='Prev'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'First' value ='First'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'Search' value ='Search'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("<TD>");
out.println("<INPUT TYPE = 'Submit' NAME = 'Exit' value = 'Exit'>");
out.println("</INPUT>");
out.println("</TD>");
out.println("</TR>");
out.println("</TABLE>");
%>
</FORM>
</BODY>
</HTML>
Here is my method in CCRS class
This method create a multidimensional array of fixed row
and column .This array is populated with all the data that has to
be displayed ,and also satisfies the condition specified by the user.
This array is subsequently used in the JSP (which calls this method)
and displays all the row.
public void CreatePageOfSubmissionList(HttpServletRequest request) throws Exception
ResultSet ResSet;
ShowRecord = true;
DisplayMessage = "";
if (request.getParameter("ShowRecord") != null )
ScrProvince_Code = request.getParameter("Province_Code").trim();
ScrFacility_Code = request.getParameter("Facility_Code").trim();
ScrFiscal_Year = request.getParameter("Fiscal_Year").trim();
ScrFiscal_Period = request.getParameter("Fiscal_Period").trim();
ScrStatus_Code = request.getParameter("Status_Code").trim();
LastSubmission_Id = 999999999;
MathematicalSign = "<";
else
if (request.getParameter("Release") != null )
ScrSubmission_Id = request.getParameter("Release").trim();
Submission_Id = ScrSubmission_Id;
ReleaseSubmission();
          LastSubmission_Id     =     FirstSubmission_Id;
MathematicalSign = "<=";
else
if (request.getParameter("Process") != null )
ScrSubmission_Id = request.getParameter("Process").trim();
Submission_Id = ScrSubmission_Id;
ProcessSubmission();
          LastSubmission_Id     =     FirstSubmission_Id;
MathematicalSign = "<=";
else
if (request.getParameter("Remove") != null )
ScrSubmission_Id = request.getParameter("Remove").trim();
Submission_Id = ScrSubmission_Id;
RemoveSubmission();
          LastSubmission_Id     =     FirstSubmission_Id;
MathematicalSign = "<=";
else
if (request.getParameter("Prev") != null )
PageNumber = PageNumber - 1;
Long Temp = (Long) VecPrevSubmission_Id.elementAt(PageNumber);
LastSubmission_Id = Temp.longValue();
MathematicalSign = "<=";
else
if (request.getParameter("First") != null )
Long Temp = (Long) VecPrevSubmission_Id.elementAt(0);
LastSubmission_Id = Temp.longValue();
PageNumber = 0;
MathematicalSign = "<=";
else
if (request.getParameter("Next") != null )
PageNumber = PageNumber + 1;
     VecPrevSubmission_Id.addElement(new Long(FirstSubmission_Id));
MathematicalSign = "<";
//initialize the page array
for(int Row = 0;Row <= MaxPageRow;Row++)
for(int Col = 0; Col <= MaxPageCol;Col++)
NewPage[Row][Col] = "";
Submission_Id = LastSubmission_Id + "";
Province_Code = ScrProvince_Code;
Facility_Code = ScrFacility_Code;
Fiscal_Year = ScrFiscal_Year;
Fiscal_Period = ScrFiscal_Period;
Status_Code = ScrStatus_Code;
BuildQueryForSubmissionList();
ResSet = Stmt.executeQuery (Query);
ResSetMetaData = ResSet.getMetaData();
//remember NumOfFields is O is java variable which starts with 0 and not 1,
//that is the reason I am subtracting 1 from oracle returned value.
int NumOfFields = ResSetMetaData.getColumnCount() - 1;
FilledCol = -1;
for(int Col = 0; Col <= NumOfFields;Col++)
//1 is added because JDBC subscripts starts with 1 and not 0
NewPage[0][Col] = ReturnChangedColumnName(Col + 1,ResSetMetaData);
FilledCol = FilledCol + 1;
FilledCol = FilledCol + 1;
NewPage[0][FilledCol] = "Remove";
FilledCol = FilledCol + 1;
NewPage[0][FilledCol] = "Process";
FilledCol = FilledCol + 1;
NewPage[0][FilledCol] = "Release";
FilledCol = FilledCol + 1;
NewPage[0][FilledCol] = "Preview";
//Note at this point row number 0 of the array is having the field names
//Remaining rows (i.e 1,2...etc) will now be populated with field data
FilledRow = 0;
MoreRecExist = false;
while(ResSet.next())
if (FilledRow == MaxPageRow)
MoreRecExist = true;
break;
FilledRow = FilledRow + 1;
     if     (FilledRow     ==     1)
          FirstSubmission_Id     =     Long.parseLong(ReturnColumnData(1,ResSet));
FilledCol = -1;
for(int Col= 0; Col <= NumOfFields;Col++)
//1 is added because JDBC subscripts starts with 1 and not 0
NewPage[FilledRow][Col] = ReturnColumnData(Col + 1,ResSet);
FilledCol = FilledCol + 1;
LastSubmission_Id = Long.parseLong(ReturnColumnData(1,ResSet));
Status_Code = ResSet.getString("Status_Code");
if (Status_Code == null)
Status_Code = "";
else
Status_Code = Status_Code.toUpperCase().trim();
FilledCol = FilledCol + 1;
//IF SUBMISSION HAS ONLY BEEN REGISTERED THEN SHOW A REMOVE BUTTON
if (Status_Code.equals("R"))
NewPage[FilledRow][FilledCol] = "<INPUT TYPE = 'Submit' NAME = 'Remove' value ='" + LastSubmission_Id + "'></INPUT>";
FilledCol = FilledCol + 1;
//SHOW THE PROCESS BUTTON IF SUBMISSION HAS BEEN BEEN REGISTERED
if (Status_Code.equals("R"))
NewPage[FilledRow][FilledCol] = "<INPUT TYPE = 'Submit' Name = 'Process' value ='" + LastSubmission_Id + "'></INPUT>";
FilledCol = FilledCol + 1;
//SHOW THE RELEASE BUTTON IF THE SUBMISSION HAS BEEN BEEN PROCESSED
if (Status_Code.equals("P"))
NewPage[FilledRow][FilledCol] = "<INPUT TYPE = 'Submit' NAME = 'Release' value ='" + LastSubmission_Id + "'></INPUT>";
FilledCol = FilledCol + 1;
//SHOW THE PREVIEW BUTTON IF THE SUBMISSION HAS BEEN PROCESSED
if (Status_Code.equals("P") ||
Status_Code.equals("C") )
NewPage[FilledRow][FilledCol] =
"<img src=\"pdf.gif\" border=\"0\" onClick=\" javascript:window.open('" + StringUtil.replaceString(Preview_URL,"%Submission_Id%",new Long(LastSubmission_Id).toString()) + "', 'SubmissionReport','location=no,menubar=no,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1.2/8 + ',top='+window.screen.availHeight*1.2/14 + ',width=' + window.screen.availWidth*3/4 + ',height=' + window.screen.availHeight*6/7 + '')\" style=\"cursor:hand\" >";
// "<img src=\"/appl/development/ccrs/images/pdf.gif\" border=\"0\" onClick=\" javascript:window.open('" + StringUtil.replaceString(Preview_URL,"%Submission_Id%",new Long(LastSubmission_Id).toString()) + "', 'SubmissionReport','location=no,menubar=no,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1.2/8 + ',top='+window.screen.availHeight*1.2/14 + ',width=' + window.screen.availWidth*3/4 + ',height=' + window.screen.availHeight*6/7 + '')\" style=\"cursor:hand\" >";

How to text for Submit button in different languages.

Hi All
We have a requirement to add 'Submit Button' in iSupplier Portal's Standard Pages.
We have substituted the controller to add the Submit button and it works fine also .
Our Application has 7 different languages, so the requirement is to show the button Text w.r.t the
language only .
We have written the following code
OASubmitButtonBean oasb= (OASubmitButtonBean)oapagecontext.getWebBeanFactory().createWebBean(oapagecontext,"BUTTON_SUBMIT");
oasb.setID("IPOPrintReportButton");
oasb.setUINodeName("IPOPrintReportButton");
oasb.setEvent("IPOPrintReportButton");
oasb.setText("IPO Print Report Button");
//oasb.setTranslatableText("XXIPO","XXIPO_PRINT_REPORT_TXT");
pageButtonBarBean2.addIndexedChild(oasb);
when we have used setText method , we are getting the same name in every language. so we tried using setTranslatableText Method and gave it the Messages to set the Button Text. But Now button text is empty .
Pls tell us how to achieve this requirement of having text in different languages on the button ..w.r.t the environment language. we have also defined same Message 'XXIPO_PRINT_REPORT_TXT' for other languages.
naveen

Hi Kumar
Can u pls brief this a little more .
Lets say I get the language as German in the Controller . Now how do i set the test for the submit button .
Do u mean to say I should check like this:
If (langaue is german )
button.setText("German Submit")
else if (langauge is netherland)
button.setText("Netherland Submit")
harcoding the vaues in the contorller??

Associating two events with submit button using javascript in jsp

Hi
How can i Associate two events with submit button using javascript in jsp. Firstly it should insert the data to database and secondly it should close the same pop-up window

Have something like :
<input type="submit" name="submitbtn" value="Click me" onClick="function1(); function2(); " />
You just call both functions sequentially, it's that simple. Although using javascript to work with a database, that seems a bit tricky.

Difference between Submit Button and Button

Hi,
Please help me understanding the difference bewteen the following cases.
1) Submit Button + ActionType : None
2) Submit Button + Action Type :fire partial action
3) Submit Button + Action Type : Fire Action
4) Button + Action Type : fireAction
5) Button + Action Type : firePartialAction
My Understanding is 1st and 4th Both submits the form.
Also, please let me know, is it a valid scenario where we use the SubmitButton and still gives ActionType. What difference it makes when action type is given with submit button.
I understand that when we use 4th then it submits the form and whereas in case of 5th it doesnt.
Thanks in advance
Saurabh Agrawal

Hi,
Thanks for your replies.
Actually i wanted to understand this in context of the issue we are facing.
We have a text field and a button besides it. We have a TAB OUT even associated with the text field which is captured using firePartialAction event. Also, the button is a SUBMIT BUTTON with a partialFireAction associated with it.
1) When you give % in textfield and tab out a popups come and load the data in a table - WORKS FINE
2) When you dont enter anything in textfiled and clicks on the button, same popups comes and loads data into the table. - WORKS FINE
3) When you give % in Text Field and clicks on the BUTTON, from JDEV, we verified that TAB OUT event gets triggered.Once that event is over, we can see the HOUR GLASS which doesnt go away. --- ISSUE
Resolution Tested : When i just remove ACTIONTYPE from button and do NAVIGATION - 3, issue is resolved.
Also, if i make that button as BUTTON and give FIRE ACTION, issue is resolved.
Now the main concern is the same combination SUBMIT BUTTON and ACTIONTYPE: firePartialAction works fine in 11i and causes issue in R12.
Please let me know your comments.
Thanks in advance
Saurabh Agrawal

Two actions for submit button

Hi
I'm new to modifying pdfs so please excuse me. I have a form with a submit button and the action associated is
I want to add this script:
but the form will only do 1 action in the event node. So how can I make it show the message box and then do the submit? please note that the forum removed the script tags

Hello,
You can link your button actionListener to a manageBean method and into this method, call your to ExecuteWithParams binding operation like
public void actionListener(ActionEvent actionEvent) {
     BindingContext bindingContext = BindingContext.getCurrent();
     BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
     OperationBinding opBinding1 = ((DCBindingContainer)bindings).getOperationBinding("ExecuteWithParams1");
     opBinding1.execute();
     OperationBinding opBinding2 = ((DCBindingContainer)bindings).getOperationBinding("ExecuteWithParams2");
     opBinding2.execute();
}This also can be included into a valueChangeListener binded to an input component for example
public void changeListener(ValueChangeEvent valueChangeEvent) {
     BindingContext bindingContext = BindingContext.getCurrent();
     BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
     OperationBinding opBinding1 = ((DCBindingContainer)bindings).getOperationBinding("ExecuteWithParams1");
     opBinding1.execute();
     OperationBinding opBinding2 = ((DCBindingContainer)bindings).getOperationBinding("ExecuteWithParams2");
     opBinding2.execute();
}Jack

If we upgrade to a Professional Edition DPS license can we create an unlimited number of Single edition apps for iPad, iPhone and Android devices?

I work for a organisation based in Sydney and we have a team license for creative cloud (single edition).
We have been producing single folio apps for the iPad and want to continue this through 2015.
At the moment we can only create apps for the iPad platform. If we upgrade to a Professional Edition DPS license can we create an unlimited number of Single edition apps for iPad, iPhone and Android devices?
We do not need multi-folio apps as we are not a publishing company.

Thanks Neil
I sent an email yesterday and am awaiting a reply. Here is my email for reference.
Matt
I work for a large organisation based in Sydney and we have a team license for creative cloud (single edition).
We have been producing single folio apps for the iPad through Indesign and the App builder. We now want to produce apps for iPhone, iPad and Android devices.
If we upgrade to a Professional Edition DPS license can we create an unlimited number of apps for iPad, iPhone and Android devices?
We are not a publishing company so we will produce a small number of the apps. If you could get back to me with a solution and approx price that would be great.
Thanks for your time
Regards,
Matt

Making Page look same in All Pixels & Writing code for Submit Button.

Hello All,
How to make the page look the same in all computers even though the pixels are different?
Please help me in this regard.
More Over if I want write the code for Submit button where the code should be written.
Whether the code is different from normal ABAP coding?
Warm Regards,
SampathKumar G.

Hi Sampath,
You can trigger mandatory field checks in WDA as in R/3. For this you need to make the "state" property of your input field to "required".
In addition to this you need to call the static method check_mandatory_attr_on_view of class cl_wd_dynamic_tool. This would then automatically verify if all the mandatory fields have been filled or not. It would then populate the error messages into an internal table and display them in the view. Also the mandatory fields which haven't been filled would be highlighted with a red border. You need to put the below coding into the action up on which you want to trigger the data chesks.
data: lt_msg TYPE cl_wd_dynamic_tool=>t_check_result_message_tab,
          lo_view_controller TYPE REF TO if_wd_view_controller,
          lo_message_manager type ref to if_wd_message_manager.
lo_view_controller ?= wd_this->wd_get_api( ).
lo_message_manager = lo_view_controller->get_message_manager( ).
cl_wd_dynamic_tool=>check_mandatory_attr_on_view(
    EXPORTING
      view_controller = lo_view_controller
      display_messages = abap_true
    IMPORTING
      messages = lt_msg ).
Regards,
Uday

Can you stylise the Submit button and can you manually place it

Hello
I have a large pdf document with the form in the middle of it, are you able to style the submit button and are you able to manually place it on a specific page when using FormCentral?
Kind Regards
Eugene

Hi Eugene,
There is a 500 field limitation, regardless of what subscription level you have. Please see: Maximum Number of Fields Reached
Best,
Sara

I want to change my email for creative cloud, and have uninstalled and reinstalled cc, but it hasn't changed yet! How can i change my email??

I want to change my email for creative cloud, and have uninstalled and reinstalled cc, but it hasn't changed yet! How can i change my email??

Change Account https://forums.adobe.com/thread/1465499 may help
or
Adobe contact information - http://helpx.adobe.com/contact.html

Edit email for submit button and Javascript?

Similar Messages

Maybe you are looking for