Edit persistent timestamp property value from SAP MII Administration menu

We have created a MII shared memory attribute with data type timestamp.
Now we are trying to change the value from Menu->DataService->Shared Memory of the project.
But it always throws the error : "Error occured while converting the type of the variable".
Can anyone help in this regard ?
Edited by: AbhiGh on Feb 13, 2012 6:11 PM
Edited by: AbhiGh on Feb 13, 2012 6:11 PM

Create a little transaction with a datetime property holding the value you wish to update. Use and Assignment action block to update the persistent timestamp property. Then execute the transaction from your workbench.
Would also add a Tracer action block both before and after the Assign action to display the shared memory property's contents.
You will have to modify the settings of the property so that it can be updated (uncheck Readonly and you may want to tinker a bit with Protected and Cache checkboxes).
If you do a mouse over in the workbench for the property or double click to open it up, it will display its original default value and not necessarily the present contents (been a while since I played with them, so this may have changed).
Regards,
Mike

Similar Messages

[ASK] Get One Row of Property Value From Dimension in Script Logic

Hello, i need help about how to get one row of property value from dimension in script logic.
Let say there is CATEGORY dimension and the members are like this :
ID                                                  YEAR   Status
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
PLAN_2012                                  2012        A
PLAN_2012_V1                           2012        I
ACTUAL_2012                             2012        I
FORECAST_2012                         2012        I
FORECAST_2012_V1                  2012        A
If i scope CATEGORY like this :
*XDIM_MEMBERSET CATEGORY = [CATEGORY].PROPERTIES("YEAR") = "2011"
Then i will get member scope like this :
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
Question :
In script logic, how can i read the second record of scope and move it to variable ?
Ex. : I read second record, so i can get the data of second record (PLAN_2011_V1, 2011, A).
Is there any function to read all record that had been scope ? So i can read all those 5 records.
Is there any substring or offset function in script logic ? How to use it ?
Thank you.

Hi,
Firstly, when we scope the logic, it doesnt fetch the entire record from the member sheet. It just fetches the ID.
Secondly, we dont have the feasibility to read only the second ID and skip the others. However, one alternative is that you use the SELECT statement to store all the IDs in a variable, and then use a FOR loop. But this will loop through all the 5 IDs, as per your example. If you want to skip all the IDs except one, you should maintain some property, so that all the IDs are neglected which doesnt have a particular property value.
Hope you got the idea.

Issue in Passing Value from SAP Portal through Open Doc

Hi
I am trying to pass the variables through open doc link from SAP portal.
I am trying to pass four variables.
OrganisationHierarchy
FiscalPeriodFrom
FiscalPeriodTo
Business
OrganisationHierarchy and Business are hierarchy variables.
I am testing few scenarios.Scenario1 and Scenario 2 are working fine.
But I am facing with Scenario3 and Secnario4.
Scenario1
Only two levels are passed to OrganisationHierarchy
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA++++++++++++++++++++++++++0HIER_NODE]&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is refreshed
Status: Passed
Scenario2
Only two levels are passed to Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS++++++++RKEG_WWBUS_0MATPLANT].[ATV+++++++++++++++++++++++++++0HIER_NODE];[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[TPS++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is refreshed
Status: Passed
Scenario3
When two levels are passed for both OrganisationHierarchy,Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[ATV++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is never refreshed and its keep on running
Status: Failed
Scenario4
Only three levels are passed for OrganisationHierarchy,
No values are passed for Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]; [ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[ASEAN++++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is never refreshed and its keep on running
Status: Failed
Thanks
Arun

Hello Rupachandran,
the memory id won't work as it is within the current session only.
you have two main options:
1) pass parameters in URL
2) persist the parameters somehow ( shared memory area, database table ) and pass a GUID in the URL which refers to these.
strangely enough although this is a mirror of most of the posts here, which want to launch WDA apps from standard GUI based code, the techniques are very very similar.
you might get some help from looking at this recent post Calling webdypro through R3 Function module

How to retrieve the data/property value from portalapp.xml

Hi I would like to retrive the some common data from the portalapp.xml file
<application>
<application-config>
    <property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
      </application-config>
<components>
    <component name="DynZMMGR">
      <component-config>
        <property name="ClassName" value="DynZMMGR"/>
        <property name="SecurityZone" value="DynZMMGR/high_safety"/>
        <property name="ComponentType" value="jspnative"/>
        <property name="JSP" value="pagelet/DynJspZMMGR.jsp"/>
      </component-config>
      <component-profile/>
    </component>
    <component name="dynpagedel">
      <component-config>
        <property name="ClassName" value="dynpagedel"/>
      </component-config>
      <component-profile/>
    </component>
    <component name="VARIANTLIST">
      <component-config>
        <property name="ClassName" value="com.sap.ep.r3rpts.VARIANTLIST"/>
        <property name="SecurityZone" value="com.sap.ep.r3rpts.VARIANTLIST/high_safety"/>
      </component-config>
      <component-profile/>
    </component>
    <component name="DynZMM33">
      <component-config>
        <property name="ClassName" value="DynZMM33"/>
        <property name="SecurityZone" value="DynZMM33/high_safety"/>
        <property name="ComponentType" value="jspnative"/>
        <property name="JSP" value="pagelet/DynJspZMM33.jsp"/>
      </component-config>
      <component-profile/>
    </component>
</components>
<services/>
</application>
The above is my portalapp.xml file .
I want to retrieve the common data across the component.
These datas are common across the components .
I kmow by putting the data inside the
component name="DynZMM33">
      <component-config>
        <property name="ClassName" value="DynZMM33"/>
        <property name="SecurityZone" value="DynZMM33/high_safety"/>
        <property name="ComponentType" value="jspnative"/>
        <property name="JSP" value="pagelet/DynJspZMM33.jsp"/>
      </component-config>
<component-profile>
   <property name="UserID" value="userid"/>
   <property name="password" value="password"/>
</component-profile>
</component>
this becoms component specific ... which I can retriev the by using
String ClientVal = request.getComponentContext().getProfile().getProperty("Client");
in doContent() method ..
But this way i have to specify these properties in all the component.. which is repetetive in nature.
I would rather put it in common location and want to retrieve the info from the portalapp.xml...
How to achieve this
I am using "AbstractPortalComponent" .
thanks
pkiran

Hi Prashanth,
see Reading another iView's profile personalized values and Validate PCD URI
Anyhow, maybe you should implement a service which returns the values (from the service profile). This would be more clean for accessing global values.
Hope it helps
Detlev

Error in calling a web service of primavera from sap MII

Hi All,
I am trying to consume a web service of primavera p6 from SAP XMII 12.1
I tested the web service from SOAP UI ,its working fine for me,but when I tested with MII ,connection is unsuccessful
I have used the HTTP_Post Action block and entered the required information as specified correctly
Error is:
[ERROR] Post Action: error occured while trying to connect to the server Exception: [Connect timed out]
I tested with web service action block of MII also but no luck now.
Please explain me reason for hte error and how to get rid of it,
Its very urgent,please help

Hey,
I think this is an authentication issue. Are you passing the user credentials in Web Service action block.
Regards,
Gita

VS2008 C# cannot get return/export values from SAP (one way connection yet)

Hello Experts,
I have successfully established connection to SAP by using Visual Studio 2008 (C#) and web services:
-     I am able to login into the SAP-System with my C#-Application
-     I am able to call and run functions with my C#-Application
-     I am able to passing over vales from my C#-Application to the function module (importing variables = ok)
The problem I face now is getting return values from the function module (getting values of the exporting variables). I just have no idea how to call the u201CResponse-methodu201D correctly in C#.
I think the problem is hided in the wsdl-xml-file.
Here are my codes (only C# codes are really relevant) I post them step by step:
ABAP CODE OF FUNCTION MODULE:
FUNCTION Z_GET_BP_DATA.
TABLES: but000.
Data: ls_test type but000,
      lv_bpid type BU_PARTNER.
u201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201D
u201D importing parameter BPID = type string   u201D
u201D exporting parameter BPNAME = type string u201D
u201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201Du201D
lv_bpid = BPID.
SELECT SINGLE * from but000 into ls_test
where PARTNER = lv_bpid.
BPNAME = ls_test-NAME_LAST.
ENDFUNCTION.
[Here|http://ng-webservice.com/myxml.xml] is code of my wsdl-xml-file:

C
APPLICATION MAIN CODE:
using System;
using System.Net;
using System.Collections.Generic;
using System.Text;
using System.Web.Services.Protocols;
using System.Web.Services;
namespace test
    class Program
        static void Main(string[] args)
            try
                //Sample Project for calling WS in SAP and writing data
                string var_bpid = "0000000082";
                string var_bpname;
                CookieContainer cookie = new CookieContainer();
                webref_get_bp_data.service _proxy1 = new test.webref_get_bp_data.service();
                webref_get_bp_data.ZGetBpDataResponse _proxy3 = new test.webref_get_bp_data.ZGetBpDataResponse();
                test.webref_get_bp_data.ZGetBpData myref = new test.webref_get_bp_data.ZGetBpData();
                test.webref_get_bp_data.ZGetBpDataResponse myresponse = new test.webref_get_bp_data.ZGetBpDataResponse();
                _proxy1.Credentials = new NetworkCredential("MYUSER", "MYPASSWORD");
                _proxy1.CookieContainer = cookie;
                myref.Bpid = var_bpid; // myref gets an id for passing over to the function module
                _proxy1.ZGetBpData(myref); // call/run function module with given bpid
                var_bpname = _proxy1.ZGetBpData(myref);
                var_bpname = myresponse.Bpname; // HOW TO GET EXPORTING VALUE???
                Console.WriteLine(myref.Bpid);
                Console.WriteLine(var_bpname);
                cookie = _proxy1.CookieContainer;
                Console.WriteLine("Finish proxy1");
                string response = Console.ReadLine();
            catch (SoapException exc)
                Console.WriteLine("Exception thrown");
                throw exc;
                string response = Console.ReadLine();

JCo getting truncated value from SAP when field data type is RAW

We are trying to fetch data from a SAP-AII table by using JCo using the RFC RFC_READ_TABLE.
We are getting incomplete data when the data type of the column is RAW in a particular table.A typical case is:
Table Name: /AIN/DM_DEVCTR
Field : CLIENT                Type: CLNT    Length:3      Value: 100                                                            (SAP Generated)
Field: DEVCTR_GUID    Type:RAW      Length:16    Value: 306F50F53805ED488DE9797AC86B5728     (SAP Generated)
Filed: DEVCTR_ID         Type:CHAR    Length:128   Value: KDEVICECONTROLLER                             (User input)
For the fields CLIENT and DEVCTR_ID we get the entire value (including blank spaces) but for DEVCTR_GUID we get only 16 characters whereas SAP-AII stores a value that is 32 characters in length. How do we fetch the actual value instead of the truncated value?
Sample code is attached.
          try {
               mConnection = JCO.createClient("100", // SAP client
                         "User", // userid
                         "Password", // password
                         "EN", // language
                         "SAP", // host name
                         "00"); // system number
               mConnection.connect();
               if (mConnection == null) {
                    System.out.println("Connection to SAP Server failed.");
               mRepository = new JCO.Repository("User", mConnection);
               ftemplate = mRepository.getFunctionTemplate("RFC_READ_TABLE");
          } catch (Exception ex) {
               ex.printStackTrace();
               System.exit(1);
          JCO.Function function = ftemplate.getFunction();
          JCO.ParameterList importParamList = function.getImportParameterList();
          importParamList.setValue("/AIN/DM_DEVCTR", "QUERY_TABLE");
          importParamList.setValue(";", "DELIMITER");
          JCO.Table tableData = function.getTableParameterList().getTable("DATA");
          JCO.Table fields = function.getTableParameterList().getTable("FIELDS");
          mConnection.execute(function);
          if (tableData.getNumRows() > 0) {
               do {
                    for (JCO.FieldIterator e = tableData.fields(); e
                              .hasMoreElements();) {
                         JCO.Field field = e.nextField();
                         String str = field.getString();
                         String[] values = str.split(";");
                         for(int i = 0; i < values.length; i++){
                              System.out.println(values<i>);
               } while (tableData.nextRow());
          } else {
               System.out.println("No results found");
          mConnection.disconnect();

Hi Kaanu,
   You have to modify your java code.
String val = new String( field.getByteArray());
PS: Please reward points for helpful answer or problem resolved.

How to Get property values from Shared Object in client's load event - Very urgent

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

How to retrieve a property value from an iview in the back-end?

Hi,
I am looking for a back-end function module or any other way to retrieve the property value of an iview in the portal.
Is this possible?
thanks,
Bert Caryn

Hi,
Look at the following threads,
For programmatically getting the iview properties,
Programmatically getting iView Properties
Also,
Get Properties of IView Programmatically
Permanent change of iView property programmatically
Hope these threads help u.
Regards
Srinivasan T

How to remove values from a drop down menu with personalizations

I have been unable to find any examples of removing values from a dropdown menu using forms personalizations. We have a specific responsibility that we would like to limit the actions that they can carry out on the person form. I have tried setting default values, setting the object to update_allowed = false, and have been unable to come up with a solution. The examples I have found do not show this type of personalization so I am unsure if it can be done. If anyone has done a personalization like this, please post the steps to reproduce or a link to an example. Thanks.

DineshS wrote:
Which dropdown menu you want to customized ?The specific menu we would like to customize is the 'Action' menu on the Person form that usually contains 'Create Employment' and so on. We have a specific recruiter responsibility that we would like to limit to 'Create Applicant'. I have been unable to come up with a combination of steps in personalizations that sets that value in the dropdown and allows it then be unchangeable. If you have any suggestions, please let me know. I would prefer not to create a custom form but without personalizations, I might have to.

Filter query based on a value from a drop down menu

I am using ADFBC/JDev 10.1.3/ADF-faces (JSPX)
I would like to display a table of data based on a view object and have a drop down menu of values that the user can select from which would filter the table of data. The filter would be applied to a field in the VO. For example, have a JSPX page that shows all employees and have a drop down menu that filters the employees by a specific department with an option to show all departments too in the drop down. I'm not sure if Steve Muench's example #76 (http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html) would serve as a basis for this requirement or not.
Can anybody give me high level guidance on how to do this? Both declaratively and programmatically would be great.
Thanks,
Quoc

I can't get the JSPX page to display the correct data. It's displaying the entire VO and when you try to select Yes or No or All from the drop down menu, it just changes the Active Flag column in the table to whatever you select for the first row only and still displays the rest of the rows in the VO.
Here's my JSPX code:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces"
          xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
          xmlns:cust="http://xmlns.oracle.com/adf/faces/customizable">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
              doctype-system="http://www.w3.org/TR/html4/loose.dtd"
              doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <afh:html>
      <afh:head title="showEmployees">
        <meta http-equiv="Content-Type"
              content="text/html; charset=windows-1252"/>
      </afh:head>
      <afh:body>
        <af:messages/>
        <h:form>
          <af:panelForm>
            <af:selectOneChoice value="#{bindings['bind_active_flag1'].inputValue}"
                                label="#{bindings['bind_active_flag1'].label}">
              <f:selectItems value="#{bindings['bind_active_flag1'].items}"/>
            </af:selectOneChoice>
            <af:commandButton actionListener="#{bindings.ExecuteWithParams.execute}"
                              text="ExecuteWithParams"
                              disabled="#{!bindings.ExecuteWithParams.enabled}"/>
          </af:panelForm>
          <af:table value="#{bindings.EmployeesView.collectionModel}" var="row"
                    rows="#{bindings.EmployeesView.rangeSize}"
                    first="#{bindings.EmployeesView.rangeStart}"
                    emptyText="#{bindings.EmployeesView.viewable ? 'No rows yet.' : 'Access Denied.'}">
            <af:column sortProperty="EmployeeId" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.EmployeeId}">
              <af:outputText value="#{row.EmployeeId}">
                <f:convertNumber groupingUsed="false"
                                 pattern="#{bindings.EmployeesView.formats.EmployeeId}"/>
              </af:outputText>
            </af:column>
            <af:column sortProperty="FirstName" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.FirstName}">
              <af:outputText value="#{row.FirstName}"/>
            </af:column>
            <af:column sortProperty="LastName" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.LastName}">
              <af:outputText value="#{row.LastName}"/>
            </af:column>
            <af:column sortProperty="ActiveFlag" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.ActiveFlag}">
              <af:outputText value="#{row.ActiveFlag}"/>
            </af:column>
          </af:table>
        </h:form>
      </afh:body>
    </afh:html>
</f:view>
</jsp:root>Here's the bindings page:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
                version="10.1.3.41.57" id="showEmployeesPageDef"
                Package="view.pageDefs"
                MsgBundleClass="view.pageDefs.showEmployeesPageDefMsgBundle">
<parameters/>
<executables>
    <iterator id="EmployeesViewIterator" RangeSize="10" Binds="EmployeesView"
              DataControl="AppModuleDataControl"/>
    <variableIterator id="variables">
      <variableUsage DataControl="AppModuleDataControl"
                     Binds="EmployeesView.variablesMap.bind_active_flag"
                     Name="EmployeesView_bind_active_flag" IsQueriable="false"/>
    </variableIterator>
    <iterator id="DropDownIterator" RangeSize="-1" Binds="DropDown"
              DataControl="AppModuleDataControl"/>
</executables>
<bindings>
    <table id="EmployeesView" IterBinding="EmployeesViewIterator">
      <AttrNames>
        <Item Value="EmployeeId"/>
        <Item Value="FirstName"/>
        <Item Value="LastName"/>
        <Item Value="Email"/>
        <Item Value="PhoneNumber"/>
        <Item Value="HireDate"/>
        <Item Value="JobId"/>
        <Item Value="Salary"/>
        <Item Value="CommissionPct"/>
        <Item Value="ManagerId"/>
        <Item Value="DepartmentId"/>
        <Item Value="ActiveFlag"/>
      </AttrNames>
    </table>
    <action id="ExecuteWithParams" IterBinding="EmployeesViewIterator"
            InstanceName="AppModuleDataControl.EmployeesView"
            DataControl="AppModuleDataControl" RequiresUpdateModel="true"
            Action="95">
      <NamedData NDName="bind_active_flag" NDType="java.lang.String"
                 NDValue="${bindings.EmployeesView_bind_active_flag}"/>
    </action>
    <attributeValues id="bind_active_flag" IterBinding="variables">
      <AttrNames>
        <Item Value="EmployeesView_bind_active_flag"/>
      </AttrNames>
    </attributeValues>
    <list id="bind_active_flag1" IterBinding="EmployeesViewIterator" StaticList="false"
          ListOperMode="0" ListIter="DropDownIterator" NullValueFlag="1"
          NullValueId="bind_active_flag1_null">
      <AttrNames>
        <Item Value="ActiveFlag"/>
      </AttrNames>
      <ListAttrNames>
        <Item Value="Value"/>
      </ListAttrNames>
      <ListDisplayAttrNames>
        <Item Value="Description"/>
      </ListDisplayAttrNames>
    </list>
</bindings>
</pageDefinition>Any ideas?

Passing array of values from front panel to menu

I am working with a group programming a multichannel current stimulation device and we are currently having trouble setting up the run time menu. The burning question that we have is trying to figure out how to pass an array of values from the front panel to the menu that we are setting up in the block diagram, any advice?
Thank you

Take a look at this. Its just a simple menu update using a for loop. Uses whatever your values are as the item tag and item names. Remember, item tags need to be unique. This specifically goes under the sub menu of channel, which has to be created before.
Attachments:
menu.vi ‏12 KB

Access KM predefined property values from a Web Dynpro application

Hi,
I am trying to build a custom search interface in Web Dynpro which leverages the KMC Indexing and Search services.
In this interface I would like to display value lists of predefined properties in KM (created using the Property Metadata Service) and bind each predefined property's value list to a checkbox group UI element.
Which KM API should I use to retrieve the values of a specific predefined property ?
When using the standard flexible user interface in the portal this can easily be achieved through configuration, but now I would like to know how to achieve this in Java code.
Thanks in advance for your input.
I have some idea on how to get the propertymap from a resource, but how can I access the metadata of a predefined property in KM directly ?

Hi Theo, i'm working on something like this, i have a WD application that is accessing Km through a Webservice, on the webservice ejb i have this problem:
IResourceFactory resFactory = ResourceFactory.getInstance();
IRepositoryServiceFactory serFactory = resFactory.getServiceFactory();
IPropertyConfigurationService propConfigService = (IPropertyConfigurationService) serFactory.getService("PropertyConfigurationService");
IMetaNameListIterator i = propConfigService.getMetaModel().nameIterator();
     while (i.hasNext()) {
     IMetaName metaname = i.next();
     if ( metaname.getDocumentPatterns()!= null){
     propertyData.setId(metaname.getName());
     propertyData.setName(metaname.getLabel(locale));
     propertyData.setNamespace(metaname.getNamespace());
     propertyData.setDescription(metaname.getDescription(locale));
                propertyList.add(propertyData);
On this line serFactory.getService("PropertyConfigurationService") i get the following error on the trace:
#System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]#Error##Plain###Configuration Framework error: unable to create an IConfigClientContext instance from an EP5 userInitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.#
#System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]#Error##Plain###InitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.
Do you have any idea of how to solve this? or if you accomplished in a different way, can you guide me a little bit.
Thanks in advance Theo

List of Values from SAP BW variable in Web Intelligence

Hi Ingo,
We have SAP BW Query Variables with list of values available in Universe and hence Web Intellligence.
These variables are on InfoObjects like Business Partner, Contract Account...etc. The actual values for these objects are in millions. Whenever we use these filters at WebI, its taking too much time to load all those millions of List of Values.
Can you please guide us how to avoid loading these List of Values and provide a text box for user input.
Appreciate your help.
Regards,
Ravi Kumar Garre

Hi,
no - this is a feature you can enable on any List of values including those that are being generated based on BI variable. In the Universe - assuming a query with a BI variable - you will have two List of Value definitions per Variable.
open the properties and set both of them to "Delegated Search", save the universe, export it and then you should see the difference.
ingo

Changing Property Values from within a Function

I'm wondering how I can change a property of an instance from
within a function inside a method. I have some code here...
Basically I just need to set _lynn_idle to false when a tween is
occuring and _lynn_idle to true when the tween is finished.
Unfortunately I can't seem to simply set it to false or true inside
these listener functions like I'm able to anywhere else (seems the
variable is only local to the function when I need it to access the
variable associated with the instance). Any help is much
appreciated.

Inside callback handlers the class members go out of scope.
To remedy use a local (local to the function) reference to the
current object.

Edit persistent timestamp property value from SAP MII Administration menu

Similar Messages

Maybe you are looking for