Editable ALV -- OO -- Changed data capture

Hi,
I'm using an editable ALV to display the output. Output has a field for the user to enter comments. When the user enters the comments and presses "ENTER" key or clicks somewhere else on the ALV itself, the event DATA_CHANGED or DATA_CHANGED_FINISHED gets triggered and I'm able to capture the changed data and update the DB table.(I have a "SAVE" button on the menu bar which when pressed will update the ALV values into DB table.)
However, I need to capture this changed data even if the user does not press the "ENTER" key or clicks somewhere else on the ALV, but just presses the "SAVE" button. Please let me know if there is any way to do this.
Thanks,
Raj.

Hi,
in your program check the user-command if 'SAVE' then write the following code in it
"Call the method check_changed_data to update the internal table with changed data.
DATA: lv_valid TYPE xfeld,
            lv_refresh TYPE xfeld.
      CALL METHOD gv_alv_grid->check_changed_data
        IMPORTING
          e_valid   = lv_valid
        CHANGING
          c_refresh = lv_refresh.
" to refresh alv
CALL METHOD gv_alv_grid->refresh_table_display
        EXCEPTIONS
          finished = 1
          OTHERS   = 2.
by this way it the internal table will get the changed data and then you can update it in the DB and also after updating show the ALV since it is refreshed it will now show the changed data.
Hope it helps you,
Regards,
Abhijit G. Borkar

Similar Messages

Error While enahling CDC(Change data capture) on Table.

I am enabling Change data capture (CDC) on SQL server 2012 Enterprise edition(11.0.2100.60)
. I am able to enable it on Database level with below SQL, but failed to enable on Table level.
Use DatabaseName
GO
Exec sys.sp_cdc_enable_db
GO
EXEC sys.sp_cdc_enable_table @source_schema = N'dbo',
@source_name = N'TableName', @role_name = NULL
GO
Got Error like,
'msg 22832, Level 16, State 1, Procedure sp_cdc_enable_table_internal, Line 623
Could not update the metadata that indicates table [dbo].[TableName] is enabled for Change Data Capture.
The failure occurred when executing the command '[sys].[sp_cdc_add_job] @job_type = N'capture''.
The error returned was 22836: 'Could not update the metadata for database DatabaseName to indicate that a Change Data Capture job has been added.
The failure occurred when executing the command 'sp_add_jobstep_internal'.
The error returned was 14234: 'The specified '@server' is invalid (valid values are returned by sp_helpserver).'.
Use the action and error to determine the cause of the failure and resubmit the request.'.
Use the action and error to determine the cause of the failure and resubmit the request.'
Would anyone help me to out of this?
Thanks in advance..!!

Related thread:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/fa0c2a52-63b5-4a39-9f35-fe6f0eb21d1d/change-data-capture-on-table?forum=sqldatawarehousing
Make sure SQL Server Agent is running.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Change Data Capture: Unsubscribed column results in new change set record

I have an installation using Oracle 11g Change Data Capture in synchronous mode. As of writing, I have a single publication and a single subscription. The setup is pretty basic:
PUB_TABLE
PUB_ID*
PUB_NAME*
PUB_USELESS_FLAG
* columns are included in both the PUBLICATION and the SUBSCRIPTION. The final column is of no consequence and is excluded from both the PUBLICATION and SUBSCRIPTION.
My problem is that any time PUB_USELESS_FLAG gets updated (even if no other columns are changed), a record is written to not only the change table but the change table view. The table in question has a significant number of transactions logged against it, but only a subset of those changes are of note to the subscriber (which is why the subscriber does not listen to every column). However, since the subscription is receiving records for every change to the source table, the result is an enormous amount of overhead as the subscriber is forced to sift through numerous records that are of no consequence.
I read the Change Data Capture manual for Oracle 11g; I could not find any reference to the observed functionality. Is this a consequence of using synchronous vs. asynchronous modes of capture? Is there an option to only receive changes on subscribed columns?
Thanks in advance

Bring this to the top because I have the same question. This website (http://www.bikinfo.com/HTML/CDC/CDC_Article.html) makes it sound like this problem is unavoidable.
Edited by: nik_m on Nov 10, 2011 8:04 AM
Edited by: nik_m on Nov 10, 2011 8:05 AM

Implement log based change data capture

Hi,
I am trying to get log based change data capture to work . My ODI version is 11.1.1.5. I guess for log based there are 2 ways:
1) use streams
2) use log miner tool
My database is Oracle 11g Express Edition. Streams i know can be possible only in enterprise edition of Oracle. So can anyone tell me how to implement log based CDC then since logminer tool is not preferred to be used in 11g

Hi,
Thanks for ur reply...
I received an error while creating the change table ..
ORA-29540: class oracle/CDC/PublishApi does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
Canu pls help me to fix this..
by,
Nagaa

Change Data Capture option in v$option

Hi
when i run the following query :
select parameter, value from v$option
i notice that the change data capture is FALSE, does it mean that i can't use the change data capture.
i want to make you know that we use an ORACLE 10gR2 standard edition.
Best regards

That is correct.
Re: Only SOME Streams Features Available in Standard Edition?

Distributed Hotlog Change Data Capture (CDC) on 10.2.0.3 - Very Urgent

Hello all,
I am trying to set up distributed Hotlog Change Data Capture (CDC) with both source and staging databases on 10.2.0.3. I have managed to set up everything alright until I try to great my first change table on the staging database.
We tried runnning this:
begin
     dbms_cdc_publish.create_change_table(
          owner => 'CDC_STG9_PUB',
          change_table_name => 'ed_test_1_CT',
          change_set_name => 'CR_FN9_SET',
          source_schema => 'CIS',
          source_table => 'ed_cdc_test_1',
          column_type_list => 'col1 number, col2 varchar2(20)',
          capture_values => 'both',
          rs_id => 'y',
          row_id => 'n',
          user_id => 'n',
          timestamp => 'n',
          object_id => 'n',
          source_colmap => 'n',
          target_colmap => 'y',
          options_string => null) ;
end ;
I sometimes get this:
begin
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 611
ORA-06512: at line 2
Re-running the create change set seems to solve this.
However, when I try to run enable the change source, I get this:
begin
ERROR at line 1:
ORA-31532: cannot enable change source CR_FN9_SRC
ORA-06512: at "SYS.DBMS_CDC_IPUBLISH", line 151
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 497
ORA-06512: at line 2
Any ideas would be very well appreciated.

The alert log file reads:
Errors in file /oracle/DXCE/lvol11/background/dxce_j000_24285.trc:
ORA-12012: error on auto execute of job 10
ORA-06550: line 1, column 96:
PLS-00201: identifier 'SYS.DBMS_CDC_PUBLISH' must be declared
ORA-06550: line 1, column 96:
PL/SQL: Statement ignored
Fri Mar 9 11:50:51 2007
Streams APPLY A002 started with pid=23, OS id=24304
Streams Apply Reader started P000 with pid=24 OS id=24306
Streams Apply Server started P001 with pid=25 OS id=24308
dxce_j000_24285.trc reads:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /oraxcd/10.2.0.3
System name: SunOS
Node name: stwu01
Release: 5.10
Version: Generic_118833-24
Machine: sun4v
Instance name: DXCE
Redo thread mounted by this instance: 1
Oracle process number: 29
Unix process pid: 24285, image: oracle@stwu01 (J000)
*** ACTION NAME:() 2007-03-08 14:57:15.007
*** MODULE NAME:() 2007-03-08 14:57:15.007
*** SERVICE NAME:(SYS$USERS) 2007-03-08 14:57:15.007
*** CLIENT ID:() 2007-03-08 14:57:15.007
*** SESSION ID:(541.1371) 2007-03-08 14:57:15.007
*** 2007-03-08 14:57:15.007
ORA-12012: error on auto execute of job 10
ORA-06550: line 1, column 96:
PLS-00201: identifier 'SYS.DBMS_CDC_PUBLISH' must be declared
ORA-06550: line 1, column 96:
PL/SQL: Statement ignored
Regards,
Edosa

JDE World - Integration methods, Change Data Capture

Can anyone let me know how I can know real time data changes in JD Edwards World tables.
1. Are there any tables in JDE World or DB2 where I can find change data capture information?
2. How about using DB2 triggers on the JDE World tables?
3. Or is there any other method that I can do this?
thanks in advance
Message was edited by:
Tricks

What backend database are you using, what tools do you intend to use to get at the data? With an Oracle backend there may be a variety of options.
By 'real time' do you mean immediately or within 5 minutes, 30 minutes ?

Can you help me about change data captures in 10.2.0.3

Hi,
I made research about Change Data Capture and I try to implement it between two databases for two small tables in 10g release 2.MY CDC implementation uses archive logs to replicate data.
Change Data Capture Mode Asynchronous autolog archive mode..It works correctly( except for ddl).Now I have some questions about CDC implementation for large tables.
I have one senario to implement but I do not find exactly how can I do it correctly.
I have one table (name test) that consists of 100 000 000 rows , everyday 1 000 000 transections occurs on this table and I archive the old
data more than one year manually.This table is in the source db.I want to replicate this table by using Change Data Capture to other stage database.
There are some questions about my senario in the following.
1.How can I make the first load operations? (test table has 100 000 000 rows in the source db)
2.In CDC, it uses change table (name test_ch) it consists of extra rows related to opearations for stage table.But, I need the orjinal table (name test) for applicaton works in stage database.How can I move the data from change table (test_ch) to orjinal table (name test) in stage database? (I don't prefer to use view for test table)
3.How can I remove some data from change table(name test_ch) in stage db?It cause problem or not?
4.There is a way to replicate ddl operations between two database?
5. How can I find the last applied log on stage db in CDC?How can I find archive gap between source db and stage db?
6.How can I make the maintanence of change tables in stage db?

Asynchronous CDC uses Streams to generate the change records. Basically, it is a pre-packaged DML Handler that converts the changes into inserts into the change table. You indicated that you want the changes to be written to the original table, which is the default behavior of Streams replication. That is why I recommended that you use Streams directly.

Yes, it is possible to capture changes from a production redo/archive log at another database. This capability is called "downstream" capture in the Streams manuals. You can configure this capability using the MAINTAIN_* procedures in DBMS_STREAMS_ADM package (where * is one of TABLES, SCHEMAS, or GLOBAL depending on the granularity of change capture).

A couple of tips for using these procedures for downstream capture:
 1) Don't forget to set up log shipping to the downstream capture database. Log shipping is setup exactly the same way for Streams as for Data Guard. Instructions can be found in the Streams Replication Administrator's Guide. This configuration has probably already been done as part of your initial CDC setup.
 2) Run the command at the database that will perform the downstream capture. This database can also be the destination (or target) database where the changes are to be applied.
 3) Explicitly define the parameters capture_queue_name and apply_queue_name to be the same queue name. Example:
 capture_queue_name=>'STRMADMIN.STREAMS_QUEUE'
 apply_queue_name=>'STRMADMIN.STREAMS_QUEUE'

Change Data Capture How to Tell which you are running Sync or Asyn

Hi ,
I am taking over a new system that has change data capture running, but Im really confused how this is running. Most of the CDC is set up using Sync(triggers), but I have about 5 tables that DO NOT have system generated triggers on them. I know Streams is NOT running/configured. I know Capture is not running/configured (because nothing in DBA_CAPTURE table). I can tell that these 5 tables are still getting updated in the change table schema. I can not figure out how the 5 tables that DO NOT have triggers on them are updating the change data set tables.
I had thought the the 5 tables, must be configured with HOTLOG, but when I look at the CHANGE_SETS table they all (including these 5 tables) are set to CHANGE SOURCE NAME = SYNC SOUCE. I would expected that to be HOTLOG_SOURCE. So I "assume" they aren't set up using Asnc. hot log mode. So maybe the other Async modes are used, but not pushed to another database? Is that possible?
Any other ideas on how to figure out how the CDC is set up for these 5 tables?
thanks for your help.

Thanks for the reply, but I think I must have not stated the problem clearly. I dont WANT to set the source I want to figure out how this CDC is working. I see ALL the sources are currently set to SYNC_SOURCE. Almost all of the tables are set up with system triggers on them, but 5 dont have system triggers, yet the source says SYNC_SOURCE. I did validate that the change tables are getting updated for these tables. my question is how are they getting updated? I "assume" since they dont have system triggers ont eh table they aren't synchoronus cdc (like the other tables are). yet the source says SYNC_SOURCE. What am I missing? How can I tell if the redo log is populating those changes tables? Im pretty sure it is (Becuase there aren't triggers or jobs running), but Im curious if there is a way to tell for sure.
Thanks,

OWB Support for Change Data Capture

Hi All,
Has anyone got OWB working with the Change Data Capture feature in the Oracle 9i database? I understand that CDC works by publishing changes through an advanced queue, which in theory OWB 9.0.4 upwards can have as a data source, but there doesn't appear to be any explicit support within the GUI for capturing CDC changes.
I'm also working on the assumption that we're talking about Synchronous CDC as found in 9i. 10g comes with Asynchronous CDC which I guess presents a different interface to the receiving program.
So - is there any support for 9i Change Data Capture in OWB, and has anyone got this to work in practice?
thanks
Mark

Mark,
There is currently no explicit support for the 9i CDC. You can use Advanced Queues to propagate the changes, but you will have to custom-build the capture infrastructure on the source side (set up the CDC, enqueue the changes in the appropriate form into the AQ etc.)
OWB will explicitly support CDC (10g async, which is the least invasinve method) in our next major release currently scheduled to be release in November of this year.
Regards:
Igor

Using Change Data Capture in SSIS - how to handle schema changes

I was asked to consider change data capture for a database recently. I can see that from the database perspective, its quite nice. When I considered how I'd do this in SSIS, it seemed pretty obvious that I might have a problem, but I wanted to
confirm here.
The database in question changes the schema about once per month in production. We have a lot of controls in our environment, so everytime a tables schema is changed, I'd have to do a formal change request to deal with a change to my code
base, in this case my SSIS package; it can be a lot of work. If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package
with every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?
Thanks,
Keith

Hi Keith,
What is your exact requirement?
If you want to capture the object_created, object_deleted or object_altered informations, you can try using
Extended events .
As mentioned in your OP:
"If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package with
every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?"
If you want the databases in two different environments to be in sync, then take periodic
backup and apply(restore) on the another destination DB.
(or)
you can also try with
SQL Server replication if it is really needed.
As I understand from your description, if you want the table data & schema to be in sync in two different database:
then create job [script that will drop the destination DB table & create the copy of source DB table ] as per your requirement:
--CREATE DATABASE db1
--CREATE DATABASE db2
USE db1
GO
CREATE TABLE tbl(Id INT)
USE db2
GO
IF EXISTS (SELECT * FROM SYS.OBJECTS WHERE name = 'tb1' and TYPE = 'u')
DROP TABLE dbo.tb1
SELECT * INTO db2.dbo.tb1 FROM db1.dbo.tbl
SELECT * FROM dbo.tb1
--DROP DATABASE db1,db2
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Query on Change Data Capture

Hi,
A small clarification on oracle CDC(change data capture),if the CDC is down for 6 hours due to some issues how do I capture all the source transactions into CDC views during this window?
Just doing a purge and restarting the CDC Subscriber would solve the above scenario?
Thanks

Oracle CDC is all about capturing changes in DB tables and the changes are stored in special Oracle tables. There are two modes of CDC operation: asynchronous (based on Java) or synchronous (based on DB triggers, more performance overhead).
Check
http://docs.oracle.com/cd/B13789_01/server.101/b10736/cdc.htm#i1025409
http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/data_capture.htm

CDC (Change Data Capture) with 2 Tables

Hello,
i want to use the change data capture for the typical Data Warehousing progress (bring the new or updatet table from source to the staging area)
So i have implemented a mapping with to tables. The source table is S_Account, the target or staging table is W_Account_DS.
I have connected/mapped the tables and in the next step i goes into property inspector of W_ACCOUNT_DS into the Area Change Data Capture --> Change Data Capture Filter and put into the follow expression Builder
Select *
from S_Acccount
where INOUTGRP1.LAST_UPD_DT = CURRENT_DATE (<-- Validation Succesful)
and the next Step i make Enabeled is true in the Change Data Capture Area. So i think it should ready for one test case.
I set in SQL Developer with an update statement the LAST_UPD_DT at 28.03.2012 in this case he should not update/insert anything, right? But he insert the full table.
I set in SQL Developer with an update statement the LAST_UPD_DT by 2 Columms to 28.03.2012 in this case he should update he should update the full table - 2 columns with the date 28.03.2012, right?
So what make i wrong or have i forgotten anything? (must set keys by the tables? I think not! If yes why?)
Must i set anything properties else? Why doesnt´work it?
I look forward for your replies :)

Setting up CDC is a fairly complex process with different options. Setting just the filter in OWB is only a very small part.
There is a blog post below on how to use code templates to do CDC which gives some insight;
http://www.rittmanmead.com/2009/10/changed-data-capture-and-owb11gr2/
Plus and older one illustrating how to use Oracle logs;
http://www.rittmanmead.com/2006/04/asynchronous-hotlog-distributed-change-data-capture-and-owb-paris/
Cheers
David

Upgrade of Database with Oracle Change Data Capture

Hello,
We are upgrading and moving our database to a different server.
The move is from 10G R1 database on Solaris to 11G R2 on Linux.
Our database uses Oracle Change Data Capture.
What is the best way to perform this migration? Unlike in the approach below, ideally, it would be without any manual steps to drop and recreate CDC subscriptions, change tables, etc.
Thanks.
Considerations for Exporting and Importing Change Data Capture Objects
http://docs.oracle.com/cd/B13789_01/server.101/b10736/cdc.htm#i1027532
Starting in Oracle Databse 10g, Oracle Data Pump is the supported export and import utility for Change Data Capture. Change Data Capture change sources, change sets, change tables, and subscriptions are exported and imported by the Oracle Data Pump expdp and impdp commands with the following restrictions:
After a Data Pump full database import operation completes for a database containing AutoLog Change Data Capture objects, the following steps must be performed to restore these objects:
1. The publisher must manually drop the change tables with the SQL DROP TABLE command. This is needed because the tables are imported without the accompanying Change Data Capture metadata.
2. The publisher must re-create the AutoLog change sources, change sets, and change tables using the appropriate DBMS_CDC_PUBLISH procedures.
3. Subscribers must re-create their subscriptions to the AutoLog change sets.

Hello,
I opened SR with Oracle Support, they are suggesting to perform full database import/export
Change Data Capture change sources, change sets, change tables, and subscriptions are exported and imported by the Oracle Data Pump expdp and impdp commands with the following restrictions.
Change Data Capture objects are exported and imported only as part of full database export and import operations (those in which the expdp and impdb commands specify the FULL=y parameter). Schema-level import and export operations include some underlying objects (for example, the table underlying a change table), but not the Change Data Capture metadata needed for change data capture to occur."
CDC has different implementation methods:
You may use the below query to determine-
select SOURCE_NAME, SOURCE_DESCRIPTION, CREATED, SOURCE_TYPE, SOURCE_DATABASE, SOURCE_ENABLED from change_sources;
– Synchronous CDC: with this implementation method you capture changes
synchronously on the source database into change tables. This method uses
internal database triggers to enable CDC. Capturing the change is part of the
original transaction that introduces the change thus impacting the performance
of the transaction.
– Asynchronous Autolog CDC: this implementation method requires a staging
database separate from the source database. Asynchronous Autolog CDC uses
the database's redo transport services to transport redo log information from
the source database to the staging database1. Changes are captured at the
staging database. The impact to the source system is minimal, but there is some
latency between the original transaction and the change being captured.
As suggested in the document-
Change Data Capture objects are exported and imported only as part of full database export and import operations (those in which the expdp and impdb commands specify the FULL=y parameter). Schema-level import and export
operations include some underlying objects (for example, the table underlying a change table), but not the Change Data Capture metadata needed for change data capture to occur.
■ AutoLog change sources, change sets, and change tables are not supported.
Starting in Oracle Database 10g, Oracle Data Pump is the supported export and import utility for Change Data Capture.
Re-Creating AutoLog Change Data Capture Objects After an Import Operation
http://docs.oracle.com/cd/B19306_01/server.102/b14223/cdc.htm#i1027532
After a Data Pump full database import operation completes for a database containing AutoLog Change Data Capture objects, the following steps must be performed to restore these objects:
a. The publisher must manually drop the database objects underlying AutoLog Change Data Capture objects.
b. The publisher must re-create the AutoLog change sources, change sets, and change tables using the appropriate DBMS_CDC_PUBLISH procedures.
c. Subscribers must re-create their subscriptions to the AutoLog change sets.

Change data capture from DRM to Target system

Hi All,
I have a situation where client wants Hyperion DRM to be single source of truth and pass Hierarchy information from DRM to subscribing target systems. There are 3 target systems and the database is MS SQL server.
Now in the export profile ,I am using database export where I have mapped the DRM node/properties to target table's columns. For the initial load it is a new record in the database and the data flows as it is a 1:1 mapping, however if few of the property value changes and I wan to update only the corresponding columns what will the architecture for push the change data in to target.
Can we achieve this without have any staging tables and capture the change data ?
Do need to use ODI ?
Does DRM has any work around without putting extra effort hrs by building CDC tables ?
I will really appreciate your suggestions and comments on this......

Thanks for the quick reply. However I was trying to resolve the Change data capture in Hierarcy through as" Database Table" but it seems when we choose the DEVICE option as database in the target tab of export it can only export or insert new records into the tables but cannot update and existing record.
PLease correct me if my understnding is wrong ?????

Editable ALV -- OO -- Changed data capture

Similar Messages

Maybe you are looking for