Email End-Point Input/Output missing

I'm trying to configure an email endpoint but I am unable to configure the input/output parameters. I found the below thread which sounds exactly like my problmem except the solution does not work. If I go to AdminUI, I do not see how to change it from variable to literal. Any other ideas?
http://forums.adobe.com/message/2629358#2629358
btw, I'm using LC 9.0 SP2.

Hi
The issue referred to in your link was actually resolved in SP1 for 9.0.
Since you are using SP2, you should not be required to change anything in adminui.
Did you mark your variable as "input"?
If you do this, then you should see and Inputs/Outputs tab on the email startpoint.
If you then add %SUBJECT% in your Input data filter, this should not require you to do anything else.
Once deployed, if you then look in the adminui, this input should appear as Variable not literal.
Diana

Similar Messages

Hello! I am having trouble deleting any emails on my Mac OS X. I keep getting this error message "this operation couldn't be completed. Input/Output err." Any suggestions? I have rebooted.

Hello,
I have a Mac OS X. I just had some memory installed and had to update my Mail and had a ton of old mail still there. Since then, my mail has crawled so slow and I have tried to delete my old emails and I keep getting this error message "the operation couldn't be completed. Input/Output error". Any suggestions?
Thanks!

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Custom Control Help: Draw a line and output start and end points

I'm looking to find or make a custom control (or simple subVI) that will appear as a 100x100 unit grid and allow me to draw a line from one point to another on that grid. It will then output the (x,y) of the starting and end point of that line on the grid. Any help or ideas?
Thanks,
Steve
LabVIEW 2009 SP1
Solved!
Go to Solution.

What you basically want is a loop with an event structure where you process Mouse Down, Move and Up events for your controls. There are any number of ways of implementing something like this, but this one will probably be the simplest:
Use a multicolumn listbox or a table for your grid. Hide the scrollbars and headers.
You can use the ActiveCell property with -2,-2 to select all cells. You can then use the cell size property to set the exact size of the cell.
Next, you put a picture control on top of the table and color its background transparent so that the table shows through. You use property node to make sure the two are aligned to exactly the same spot and size.
You use the mouse events on the picture control to detect the clicks and moves.
You use the table's Point to Row Column method to translate the event's position data to a cell.
You use the picture control VIs to draw the line on the picture based on that data.
You can even color the selected cells in the table using the table properties.
If you want to simplify things somewhat, you can also use the timeout event instead of the Mouse Move event to draw the line, but then you'll need to keep the timeout value in a shift register and reset it to -1 (no timeout) when the Mouse Up event happens.
I would also suggest processing Mouse Enter and Leave events to change the cursor and cancel if the user leaves in the middle of dragging.
Try to take over the world!

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

Input/Output And Method Not Found Problem

Ok so firstly I think I should apologise on two fronts.
Firstly, 'cause this is probably posted in the wrong board but I'm not sure this was suitable for the Swing board just 'cause I've been using Swing? And secondly 'cause the code I'm gonna post is so shoddy I would think this constitutes as flaim-bait. >_>
In my defense this is purely for a little class project to give something to write some documentation on so I'm really not too bothered about the efficiency or ace-mazingness of the end result. I just want it to work.
To the problem at hand.
I'm trying to write a program that asks the user a question and then outputs their answer to a file, from which a tally of answers can later be made for the purpose of displaying "results".
My problem is I've been having problems with the input/output of saving the answers given to the program.
I'm still learning and input/output is probably my weakest subject (other than, y'know, being good at Java). I've had a bash at it in the following code but all it does it overwrite what is in the file with a single answer so no list of results accumulate. I generally don't have an idea what to try for that one so any pointers would be appreciated.
Also, my second problem is, in trying to gather results by tallying what is contained in the file, I've run across a problem with the charAt() method not being found and I'm not sure why. Isn't that method a part of java.lang?
Here's the code thus far:
//libraries
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.text.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.io.*;
class CaseStudy {
     public static void main(String args[]) {
          GUI maininterface = new GUI();
          maininterface.setupMenu();
          maininterface.display();
class GUI {
     //for the actionlisteners
     int whatframe = 0;
     //creates mainframe and border content panel
     JFrame mainframe = new JFrame("Survey Client");
     JPanel borderpanel = new JPanel(), bottompanel = new JPanel();
     JButton quizbutton = new JButton("Take the quiz"), tallybutton = new JButton("Show Results"), submitbutton = new JButton("Submit Results"), menubutton = new JButton("Return To Menu");
     QuizQuestions toppanel = new QuizQuestions();
     QuizResults toppanel2 = new QuizResults();
     GUI() {
          //sets border in borderpanel, this spaces the main content in from the sides of the window
          borderpanel.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
          //sets up the frame and panels and adds on borders
          mainframe.setDefaultCloseOperation(mainframe.EXIT_ON_CLOSE); // exits java when clicking on close on main frame
          mainframe.getContentPane().add(borderpanel); // adds the panel as a component to the frame, the panel can hold stuffs
          borderpanel.setLayout(new BoxLayout(borderpanel, BoxLayout.PAGE_AXIS));// page_axis means it'll layout vertically
          bottompanel.setLayout(new BoxLayout(bottompanel, BoxLayout.LINE_AXIS));// line_axis means it'll layout horizontally
          //gives button an action
          quizbutton.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    setupQuiz();
          tallybutton.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    if(whatframe == 1) setupResults();
                    else {
                         int rusure = JOptionPane.showConfirmDialog(null, "Are you sure you wish to show results? Any current quiz answers won't be saved.", "Please Choose One", JOptionPane.YES_NO_OPTION);
                         if(rusure == JOptionPane.YES_OPTION) setupResults();
          menubutton.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    setupMenu();
          submitbutton.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    toppanel.doQuiz();
          borderpanel.add(bottompanel);
     public void setupMenu() {
          if(whatframe == 3) {
               bottompanel.remove(menubutton);
               borderpanel.remove(toppanel2);
          whatframe = 1;
          //adds components and lays them out
          bottompanel.add(quizbutton);
          bottompanel.add(Box.createRigidArea(new Dimension(0,10)));
          bottompanel.add(tallybutton);
          display();
     public void setupQuiz() {
          bottompanel.remove(quizbutton);
          bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
          bottompanel.remove(tallybutton);
          whatframe = 2;
          bottompanel.add(submitbutton);
          bottompanel.add(Box.createRigidArea(new Dimension(0,10)));
          bottompanel.add(tallybutton);
          borderpanel.add(toppanel);
          display();
     public void setupResults() {
          if(whatframe == 1) {
               bottompanel.remove(quizbutton);
               bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
               bottompanel.remove(tallybutton);
          else {
               bottompanel.remove(submitbutton);
               bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
               bottompanel.remove(tallybutton);
               borderpanel.remove(toppanel);
          whatframe = 3;
          bottompanel.add(menubutton);
          borderpanel.add(toppanel2);
          display();
     public void display() {
          //sets the size of the frame around it's components and then shows it
          mainframe.pack();
          mainframe.setVisible(true);
          mainframe.validate(); //makes referenced container relayout it's components
class QuizQuestions extends JPanel {
     LoadingSaving loadsave = new LoadingSaving();
     JPanel popm = new JPanel(), pop1 = new JPanel(), pop2 = new JPanel(), pop3 = new JPanel(), pop4 = new JPanel();
     JFormattedTextField ques = new JFormattedTextField(), op1 = new JFormattedTextField(), op2 = new JFormattedTextField(), op3 = new JFormattedTextField(), op4 = new JFormattedTextField();
     JButton bop1 = new JButton("1"), bop2 = new JButton("2"), bop3 = new JButton("3"), bop4 = new JButton("4");
     char answer;
     QuizQuestions() {
          popm.setLayout(new BoxLayout(popm, BoxLayout.PAGE_AXIS));
          pop1.setLayout(new BoxLayout(pop1, BoxLayout.LINE_AXIS));
          pop2.setLayout(new BoxLayout(pop2, BoxLayout.LINE_AXIS));
          pop3.setLayout(new BoxLayout(pop3, BoxLayout.LINE_AXIS));
          pop4.setLayout(new BoxLayout(pop4, BoxLayout.LINE_AXIS));
          this.add(popm);
          popm.add(ques);
          popm.add(pop1);
          popm.add(pop2);
          popm.add(pop3);
          popm.add(pop4);
          pop1.add(op1);
          pop1.add(bop1);
          pop2.add(op2);
          pop2.add(bop2);
          pop3.add(op3);
          pop3.add(bop3);
          pop4.add(op4);
          pop4.add(bop4);
          //sets up question text fields
          ques.setEditable(false);
          op1.setEditable(false);
          op2.setEditable(false);
          op3.setEditable(false);
          op4.setEditable(false);
          bop1.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    answer = 'a';
          bop2.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    answer = 'b';
          bop3.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    answer = 'c';
          bop4.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent e1) {
                    answer = 'd';
          Question1();
     public void doQuiz() {
          loadsave.save(answer);
     public void Question1() {
          ques.setValue("Who's your favourite X-Men character?");
          op1.setValue("Cyclops");
          op2.setValue("Xavier");
          op3.setValue("Wolverine");
          op4.setValue("Rogue");
class QuizResults extends JPanel {
     LoadingSaving loadsave = new LoadingSaving();
     JPanel popm = new JPanel();
     JFormattedTextField op1 = new JFormattedTextField(), op2 = new JFormattedTextField(), op3 = new JFormattedTextField(), op4 = new JFormattedTextField();
     int[] answerarray = new int[4];
     QuizResults() {
          popm.setLayout(new BoxLayout(popm, BoxLayout.PAGE_AXIS));
          this.add(popm);
          popm.add(op1);
          popm.add(op2);
          popm.add(op3);
          popm.add(op4);
          op1.setEditable(false);
          op2.setEditable(false);
          op3.setEditable(false);
          op4.setEditable(false);
          answerarray = loadsave.load();
          op1.setValue(answerarray[0]);
          op2.setValue(answerarray[1]);
          op3.setValue(answerarray[2]);
          op4.setValue(answerarray[3]);
class LoadingSaving {
     public void save(char answer) {
          FileReader fr;
          FileWriter fw;
          BufferedReader br;
          String s;
          try {
          //ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
               fr = new FileReader("casestudyoutput.txt");
               fw = new FileWriter("casestudyoutput.txt");
               br = new BufferedReader(fr);
               if (br.readLine() == null) s = "x";
               else s = br.readLine();
               s = s + answer;
               fw.write(s);
               fr.close();
               fw.close();
          //ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
          catch(FileNotFoundException exc) {
               JOptionPane.showMessageDialog(null, "File not found.");
               return;
          catch(IOException exc) {
               JOptionPane.showMessageDialog(null, "Something bad happened.");
               return;
     public int[] load() {
          FileReader fr;
          BufferedReader br;
          int[] answerarray = new int[3];
          String s;
          long length;
          int a = 0, b = 0, c = 0, d = 0;
          answerarray[0] = 0;
          answerarray[1] = 0;
          answerarray[2] = 0;
          answerarray[3] = 0;
          try {
               fr = new FileReader("casestudyoutput.txt");
               br = new BufferedReader(fr);
               if (br.readLine() == null) return answerarray;
               else s = br.readLine();
               length = s.length();
               for(int i = 0; i < length; i++) {
                    char ch = charAt(i); //ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
                    switch(ch) {
                         case 'a':
                              a++;
                              break;
                         case 'b':
                              b++;
                              break;
                         case 'c':
                              c++;
                              break;
                         case 'd':
                              d++;
                              break;
               answerarray[0] = a;
               answerarray[1] = b;
               answerarray[2] = c;
               answerarray[3] = d;
               fr.close();
          catch(FileNotFoundException exc) {
               JOptionPane.showMessageDialog(null, "File not found.");
               return answerarray;
          catch(IOException exc) {
               JOptionPane.showMessageDialog(null, "Something bad happened.");
               return answerarray;
     return answerarray;
}Any pointers/tips/solutions/angry posts to tell me to stop trying to learn Java would be greatly appreciated.
Thanks in advance!
Oh, and in trying to work with it a bit further I realised I'm having a few problems with runtime errors due to exceptions. The first was due to the array being assigned out of bounds (fixed in the above code). But the second reads the following:
Exception in thread "main" java.lang.NullPointerException
     at Loadingsaving.load(CaseStudy.java:330)
     at QuizResults.(init)(CaseStudy.java.259)
     at GUI.(init)(CaseStudy.java:34)
     at CaseStudy.main(CaseStudy.java:15)Not quite sure what this one means or how to handle it. =\
Edited by: ThePermster on May 19, 2008 8:08 AM

A NullPointerException means a method has been called on a null object, or a variable that isn't pointing to any object. Your Exception points to line 330, which is:
length = s.length();A NPE on that line means that s is null. So let's look at where s is set:
if (br.readLine() == null) return answerarray;
else s = br.readLine();s gets it's value from br.readLine(), so that method must be returning null. You have a logical error here. Look at your If-Else. It reads a line, makes sure it isn't null...then it reads another line. Well what if that line is null? You are performing 2 reads here instead of 1.
Since your If condition returns a value, there's no need for an Else. The code will continue on until it reaches another return. Try this:
s = br.readLine();
if (s == null) return answerarray;

Input/Output error plus CS5.1 download error (mac)

Hi. Sorry for the long story.
Yesterday, my Photoshop CS5.5 crashed and I was unable to open the program. I tried all my Adobe products and it was the same. I attempted to uninstall (for some reason Illustrator refuses to uninstall) and had hoped I could reinstall my Creative Suite 4 I purchased back in 2010. I also have a Photoshop CS5.5 disc- all with the serial numbers that came with them, too.
Here comes the problem on my end: my old computer cannot read discs anymore. I tried for several hours to get my MacBook to read the discs- nothing. So, I turned to the forums and found a download link for all of the previous versions of Photoshop. I found Photoshop CS5.5, I hit download. Everything goes smoothly until I look at what I've downloaded- it's CS5.1, not CS5.5
Adobe has mistakenly placed CS5.1 in the CS5.5 Photoshop download and no matter who I talk to through the web tech support they can't seem to understand what I'm trying to say. My serial number works but it's only for CS5.5, obviously. And yes, they've checked, it should still be valid for CS5.5, if I can ever get the download to work for me!
So concludes my first problem.
My second problem is with a message I keep getting when attempting to install any other version of Photoshop- the "input/output error" message. I figured, well, since I can't get CS5.5, I'll try my Creative Suite CS4. But after I download the .dmg and attempt to open the file and start the installation, I get this
I tried Creative Suite 4: Design Standard, Photoshop CS4, and Photoshop CS5- all gave me the same message. Is this an issue with my computer or an issue with the download?
For reference I have a MacBook Pro OS X 10.6.8 and I'm trying to install either Photoshop CS5.5 or Adobe Creative Suite 4: Design Standard and I have serial numbers for both

Use another browser for the download, though both your issues potentially point to your harddrive being on the verge of breaking down completely and/or your system requiring an operating system reinstall...
Mylenium

Watch Folder End Point Problem

Hi,
I'm currently evaluating LiveCycle ES and having problems with watched folder end point.
I use the Sample - Barcoded Forms: RouteOnDataEntry process and have added and configured the watched folder end point for the process.
When I copy the RouteOnDataEntry PDF form to input folder, it manage to pick up the file, but the PDF is moved to failure folder. Here is the information I get from the failure.log:
Failure Time----Wed Aug 15 17:30:16 PDT 2007
source location ---- Reason of failure is-----Failure to invoke the job RouteOnDataEntry
Failure to invoke the job RouteOnDataEntry
Invocation error.
javax.jms.JMSException: Could not create a session: javax.resource.spi.CommException: javax.naming.NameNotFoundException: XAConnectionFactory
Could not create a session: javax.resource.spi.CommException: javax.naming.NameNotFoundException: XAConnectionFactory
ALC-DSC-600-000: com.adobe.idp.dsc.provider.service.scheduler.impl.SchedulerRuntimeException: Failure to invoke the job RouteOnDataEntry
I check the jboss server log file and see a lot exception regarding javax.naming.NameNotFoundException: XAConnectionFactory.
Please advise what is the cause and how to solve this problem.
Thanks
Fadly

Hi,
My requirement is to develop a standalone java program to convert Word documents to PDFs using Adoble LC ES.
I found the code from the Adobe LC ES documentation. Please help me what's wrong in the code.
I don't understand what i'm missing in the code...The "test.doc" file
is there in the given location with proper data and Document object is not "NULL". Program is able to connect to Adobe LC Server. No issues with connection. But why the error ??
Code & exception are below :
CODE:
import java.io.File;
import java.util.Properties;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.livecycle.generatepdf.client.CreatePDFResult;
import
com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient;
public class GeneratePDFFromNativeFiles {
public static void main(String[] args)
Properties ConnectionPropsForSOAP = new Properties();
ConnectionPropsForSOAP.setProperty("DSC_DEFAULT_SOAP_ENDPOINT",
"http://workspace-d.web.abbott.com:8080/soap/services/
ConvertAllFileTypesToPDF?wsdl");
ConnectionPropsForSOAP.setProperty("DSC_TRANSPORT_PROTOCOL", "SOAP");
ConnectionPropsForSOAP.setProperty("DSC_SERVER_TYPE", "JBoss");
ConnectionPropsForSOAP.setProperty("DSC_CREDENTIAL_USERNAME",
"epaspdfgen");
ConnectionPropsForSOAP.setProperty("DSC_CREDENTIAL_PASSWORD",
"epaspdf1");
ServiceClientFactory factory =
ServiceClientFactory.createInstance(ConnectionPropsForSOAP);
try{
String currentDirectory = System.getProperty("user.dir");
String sourceDocPath="/test.doc";
String resultDocPath ="/bin/arg/util/simpleFTP/test.pdf";
String inputFilePath = currentDirectory+sourceDocPath;
File file = new File(inputFilePath);
String adobePDFSettings = "Standard";
String securitySettings = "No Security";
String fileTypeSettings = "Standard";
GeneratePdfServiceClient gps = new
GeneratePdfServiceClient(factory);
Document inputDoc = new Document(file,true);
CreatePDFResult docResult=gps.createPDF (inputDoc, inputFilePath,
fileTypeSettings, adobePDFSettings,
securitySettings, null, null);
Document createdDocument = docResult.getCreatedDocument();
createdDocument.copyToFile(new File(currentDirectory
+resultDocPath));
catch (Exception e) {
e.printStackTrace();
System.out.println("Error OCCURRED: " + e.getMessage());
EXCEPTION:
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal
error.
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.throwExceptionHandler(So apAxisDispatcher.java:
207)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:
125)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:
57)
at
com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:
208)
at
com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient.createPDF(GeneratePdfServ iceClient.java:
172)
at
arg.util.simpleFTP.GeneratePDFFromNativeFiles.main(GeneratePDFFromNativeFiles.java:
73)
Caused by: ALC-DSC-002-000:
com.adobe.idp.dsc.RequiredParameterException: Parameter: inputDocument
is required.
at
org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:
221)
at
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:
128)
at
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:
1087)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown
Source)
at
org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown
Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl
$FragmentContentDispatcher.dispatch(Unknown Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown
Source)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at
org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:
227)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
at
org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:
62)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
at org.apache.axis.client.Call.invoke(Call.java:2748)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:
123
Please help me.
Thanks a lot.
VJ.

Wscompile stubbornly uses SOAPElement as input/output to/from operation.

Hello. I am trying to create a web service client to consume our own web service using JWSDP 1.6. I have modified webserviceclient.xml to add "features=searchschema" in the wscompile element.
That correctly creates proxy classes for all the complexTypes in our web service's schema. However, our operation called runTransaction() should be accepting an object of type RequestMessage and returning an object of type ResponseMessage. The code generated by wscompile accepts and returns SOAPElement instead.
I have blindly tried all sorts of combinations of features (e.g. unwrap, explicitcontext) when calling wscompile but to no avail.
Am I missing something? When and why would wscompile not use the correct classes as input/output for any given operation? When and why would it choose SOAPElement instead?
In its current state, the generated code would let me populate the RequestMessage object with data but I do not see how I can eventually pass this RequestMessage object to the runTransaction() method (unless maybe I use serialization or something but that seems unnecessarily complicated). So, the generated proxy classes seem useless at this point.
Thanks. I'd really appreciate any help/direction.

Hello. I went ahead and added resolver.jar file to my classpath. Then, it looked for XMLStreamException, which I found in sjsxp/lib/jsr173_api.jar (which I have yet to find out what it's for). I went ahead and added that too. And now, I'm getting the stack trace below.
1. Why is it looking for a class from BEA?
2. How do I make it not to?
Please note that I do not have any configuration file or anything. Is there some client-side deployment file that I need to have and configure?
Thanks again,
Ever
Exception in thread "main" javax.xml.stream.FactoryConfigurationError: Provider com.bea.xml.stream.MXParserFactory not found
at javax.xml.stream.FactoryFinder.newInstance(FactoryFinder.java:72)
at javax.xml.stream.FactoryFinder.find(FactoryFinder.java:176)
at javax.xml.stream.FactoryFinder.find(FactoryFinder.java:92)
at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:136)
at com.sun.xml.ws.streaming.XMLStreamReaderFactory.<clinit>(XMLStreamReaderFactory.java:63)
at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.createReader(RuntimeWSDLParser.java:140)
at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parseWSDL(RuntimeWSDLParser.java:165)
at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:62)
at com.sun.xml.ws.wsdl.WSDLContext.<init>(WSDLContext.java:57)
at com.sun.xml.ws.client.ServiceContextBuilder.build(ServiceContextBuilder.java:77)
at com.sun.xml.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java
:117)
at com.sun.xml.ws.spi.ProviderImpl.createServiceDelegate(ProviderImpl.java:50)
at javax.xml.ws.Service.<init>(Service.java:58)
at com.mycompany.client.soap.TransactionProcessor.<init>(TransactionProcessor.java:42)
at MySample.main(MySample.java:141)

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

External HD - Input/Output Error

I had external drive that was not mounting or appearing on Disk Utility. The drive was out of warranty so I went ahead and changed the casing.
1.The drive appears on Disk Utility but still does not mount. DU only shows the root and not the volume.
2.Connecting it via USB tells me the drive is 298GB and appears as Maxtor 5000DV v0.1.00.00 Media. I connect it via Firewire 400 and it DU shows it as 128GB Maxtor.
Any help on what's going on here? DU also won't let me First Aid, Erase, or anything else on it. After I try to Erase it,Partition it, or anything it gives me "Input/Output Error".
10.5.2
Maxtor External (Actually a Seagate inside)
G5
Thanks for any help!

Adding:
What is the point of "Restore" and how is it used exactly?
Thanks!

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Help -- backup data with disk utility, input/output error.

My problem started when my MacBook Pro computer (with OsX) froze. When I restarted, the startup screen stayed on for a long time. Now, the startup screen stays on for a few seconds and then shuts off. I do NOT have a recent backup of my data. I have tried the following:
Went onto the recovery partition, used Disk Utility. When I verified the disk, it said it needed repair. When I tried to repair the disk, it said it could not be repaired.
I then tried to copy a disk image of the hard drive onto my external hard drive, but it says there is an "input/output error" and won't allow it. How else can I backup files on my computer at this point?

Had issue partitioning 2TB my passport drive, got input/output error while using disk utility.
Here is what I did to get my external disk back
In Disk Utility
1) Try to use erase option first, it failed
2) Try to partition the disk, failed as well.
3) Then try erase option again, then ... it worked !!

Disk Utility "Input - Output error" when attempting to erase Hard Drive

Hope that someone can point me in the right direction.
I bought an external hard drive for Windows a year back and loaded music onto it. I realized that I my MAC wasn't getting "Read / Write" privileges for the External Hard Drive, so I decided to try to Partition it and make it into a FAT readable device. It erased all data from my hard drive, but Disk Utility stopped the process and displayed an "input - output error".
Consequently, I can't initialize the external hard drive to make it usable on my MAC.
Can anyone point me in the right direction so I can "reformat" my external?
Thanks!

Hi all,
I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
http://www.apple.com/support/macbook/hd/repairextension/
Doh! Too late?
So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
https://discussions.apple.com/message/16090313#16090313
I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
https://discussions.apple.com/message/16081818#16081818
So, what can the problem be?!?!?!?!?
In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
Can anyone confirm this?

Input/Output Error USB 2.0 External Hard Drive

I recently started having problems with an external hard drive setup that I did not have prior to trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

I have similar problems with my USB external HD. Reformatting or repartitioning will not solve your problem. I've tried that 2 times already. The problem will reappear. My HD was running great until last month, when it suddenly without warning disappears from disk utility and the mac altogether. It not only dismounts itself, but also ejects itself, while still physically connected and the power is still on. The HD has its own power supply of course and is directly connected to one of the iMac USB ports. I have erased, repartitioned, disk verified, rebuild spotlight indexes, cleared PRAM and NVRAM, but nothing has solved the problem.
It is application independent, and not related to like iTunes as another post had suggested. Nothing to do with Mac applications. It seems to be USB related.
Messages in the Console seem to indicate something wrong with 'USB transactions passed their expiration point' and 'USB cannot enumerate something', but these statements are a bit cryptic to me. Perhaps an Apple system engineer can someday shed some light here.
thanks much for any assistance.

Issue with variable while in a PSSession connected to an end point

Ok so Ive put together a simple script that will allow our helpdesk to look at permissions on a specified folder or share adn display in a nice html page. I need it to run under different credentials so I set up an endpoint which I can connect to remotely
and run the script. The issue is in the variable that needs to get set. It prompts for the folder location and once you put it in, it just freezes up. If I run the script locally its fine and works perfectly. but running it in the remote
session connected to an end point, it just doesnt do anything once you put in the information after it prompts you. For testing also I set the $folderpath to a specific path and it does run fine through a remote session so its just an issue passing
that input back to the variable while in the remote session. Any idea?
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 0px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TD{border-width: 3px;padding: 5px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
$folderpath = Read-Host -Prompt "Enter full folder path here"
$cname ="Permissions for $folderpath : "
Get-Acl $folderpath | select access -ExpandProperty access| select identityReference | ConvertTo-HTML -head $a -body "<H2>$CNAME</H2>" | Out-File \\server\PermReports\perms.html

Here's some napkin code, FWIW
On the user side:
$Session = New-PSSession -ComputerName remoteservername -ConfigurationName checkperms
$ADIdentityReference =
#Coax an AD identity reference out of the button monkey
Invoke-Command -ScriptBlock { .\PermissionsScript.ps1 } -Session $session -Argumentlist $ADIdentityReference |
ForEach-Object {
#Ask for more input, or quit
Remove-PSSession $Session
and on the remote end:
Param ($IdentityReference)
Try {
Get-ADSomething -Identity $IdentityReference -EA Stop |
foreach-object {
Do-SomeStuff
Catch {
#Return validation fail message
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Email End-Point Input/Output missing

Similar Messages

Maybe you are looking for