Email program giving Dump
I'm using the function module SO_DOCUMENT_SEND_API1
and after that I'm using this command.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
But it is giving Dump. Says Error when calling a remote function call. RFC_GET4 I'm getting this error.
I'm recieving the mail to SAP inbox.
But when I give any other External ID mail is not coming.
Is it that do i need to do any settings?
Hi Phani ,
External Mails means ? ur outlook id ? thats y we given ref of SCOT, where u can check the status of Messages.
check ur address nodes configurations.
Regards
prabhu
Similar Messages
-
Program giving dump when run in background
Hi All,
I have an ALV report in which I am using REUSE_ALV_GRID_DISPLAY.
The report works perfectly in foreground. But when I execute in background I am getting dump.
Dump details are given below.
ShrtText
Unable to fulfil request for 134217728 bytes of memory space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
More main memory area was requested.
However, all the available space has been used up.
Possible reasons:
- Many (large) internal tables.
- Many (large) programs active.
- Deep nesting of subroutines with a lot of local data.
Can you please help on this ?Hi,
Check you code properly.
The dump is because of an infinite loop which is running when you run the program in background and it is keeping appending or inserting the same table.
Check teh same.
regards,
Ankur Parab -
While Creating Implicit enhancement system is giving dump
Hello All,
I am enhanceing standard code with the help of implicit enhancement.. I have done successfully in one system but when i try to do it in other system it is giving me short dump.. And the dump also didn't give any information..
I am working on ECC 6.0 and i assume we can use implicit enhancement points...
Kindly let me know why i am getting dump..
This is what dump says..
The exception 'CX_SY_MESSAGE_ILLEGAL_TEXT' was raised, but it was not caught
anywhere along
the call hierarchy.
What happened?
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_MESSAGE_HELPER=============CP' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_MESSAGE_ILLEGAL_TEXT', was not
caught in
procedure "ACTION" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The text parameter in MESSAGE cannot be an initial reference
METHOD set_msg_vars_for_if_t100_msg.
IF text IS INITIAL.
RAISE EXCEPTION TYPE cx_sy_message_illegal_text
EXPORTING textid = cx_sy_message_illegal_text=>initial_ref.
ENDIF.
Thanks all for your help.
Regards,
RajHi,
This is for SE16N transaction code.. Even i tried in SE38 for a custom program but still giving dump..
So this is not an issue with particular transaction but somehow getting dump ..I doono if there is any OSS notes to be implemented...
Regards,
Raj -
Dynamic data select from table is giving dump
Hello Experts,
Below statement is giving Dump after it move all the data in my dynamic table.
When i see in debug. All my recored are avilable in <T_TAB> Table.
SELECT * FROM (pa_tab) INTO CORRESPONDING FIELDS OF TABLE <T_TAB>.
> IF SY-SUBRC = 0.
Information on where terminated
The termination occurred in the ABAP program "ZFIR_ZTABLE_UPLOAD" in
"F_DOWNLOAD".
The main program was "ZFIR_ZTABLE_UPLOAD ".
The termination occurred in line 403 of the source code of the (Include)
program "ZFIR_ZTABLE_UPLOAD"
of the source code of program "ZFIR_ZTABLE_UPLOAD" (when calling the editor
4030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F_DOWNLOAD" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "ZFIR_ZTABLE_UPLOAD ". Its source code starts
in line 399
of the (Include) program "ZFIR_ZTABLE_UPLOAD ".
please help me.
Regards,
Amit
Message was edited by:
Amit GuptaHi Amit,
Check if you are doing the following in your program
FIELD-SYMBOLS <T_TAB> TYPE STANDARD TABLE.
DATA: g_tabref type ref to data. "Reference to your table structure
CREATE DATA g_tabref type standard table of (pa_tab).
ASSIGN g_tabref->* to <T_TAB>.
SELECT * FROM (PA_TAB) INTO TABLE <T_TAB>.
Hope this solves your problem.
Let me know if you require any further info.
Enjoy SAP. Reward points of useful
Rajasekhar -
Using NAST WITH DATE RANGE THE ZPROGRAM GIVING DUMP
Hi Frineds,
i am writing select query from NAST table for PO created time based on date range more than 10 days the program is giving DUMP in Quality System.. but in Developement system the dump is not coming for same date range.
please see the below code......that i ahve written. help me.
IF SY-SUBRC EQ 0.
SELECT KAPPL
OBJKY
KSCHL
SPRAS
ERDAT
ERUHR
FROM NAST
INTO TABLE IT_NAST
WHERE KAPPL = 'EF' AND
OBJKY IN R_OBJKY AND
KSCHL IN S_KSCHL
AND ERDAT IN S_DATE
AND ERUHR IN S_ERUHR.
SORT IT_NAST BY OBJKY.
DELETE ADJACENT DUPLICATES FROM IT_NAST COMPARING OBJKY.
ENDIF.
ENDIF.
regards,
Vijay
Edited by: Rob Burbank on Jan 21, 2010 12:42 PMHi,
thanks for your mail..
the dump message
There is no help text for this dump
Either the text was inadvertently deleted or the release of
the kernel differs from the release of the database
Refer to the Note system for further information on this dump.
Regards,
Vijay -
Hi,
I am creating version in cn72. when I am displaying it in cn71,it is giving dump.
In cn71 , I am giving project,then choosing DB profile and clicking version data and sales data and then enter.Then in the project version I am giving the version that I have created in CN72.And when I execute it, it is giving dump.
The error analysis(in the dump) :
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SELECT_VBAK_FOR_ITAB_VBELN" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"CRM_GUID" does not exist in any of the database tables from the FROM clause.
Please help.
Thanks in advance.Sounds like a problem in SAP standard code, did you check for SAP notes?
Thomas -
hi,
Standard PM Transaction IW22 is giving dump the use entered the correct data. There is a select statment from table VIQMEL(notification header),to fetch data from this table it's taking lot of time and going to dump.This select statment is in FM BREAKDOWN_NOTIFS_READ_F04 and program name is SAPLMCI1. I Searched Service market palce and i not found any suitable notes for this dump. Earlier it worked fine from fast few days it's giving dump. If any body faced these kind of problem please kindly give the solution. There are no customization errors.
Thanks and Regards,
Surendar Reddy.The problem is that there's too much data. If it was working before, and has only recently stopped, this would imply it's taking too long, because the data volumes have grown.
I'd log a call with SAP.
As a short-term measure, ask your basis people to increase the timeout parameter. Or use the transaction with less data selected, if possible.
matt -
Method CL_FAGL_OI_READ giving dump
Hi,
method giving dump when i m trying to use it.
st 22 stmt.
In program "CL_FAGL_OI_READ===============CP ", the following syntax error
occurred
in the Include "CL_FAGL_OI_READ===============CU " in line 25:
"Field "ABAP_FALSE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
please suggest me the solution
Regards
Sumitdear,
there may be a chance of missing some line in your sap code.
1. open program LFAGL_SPL_SERVICESU01.
2. double click on CALL METHOD cl_fagl_split_services.
3. double click on get_customizing.
you will get read stmt where your abap_false entry may be missing.
hope your problem will be solved.
Regards
vijay -
FAGL_FC_VAL is giving DUMP ERROR
Hello Friends,
When i execute FCV for G/L Balances, system is giving dump error which i mentioned below.
Runtime Errors RAISE_EXCEPTION
Date and Time 16.01.2010 18:31:11
Short text
Exception condition "CURRENCY_EMPTY" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLGICV" raised the exception
condition "CURRENCY_EMPTY".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLGICV" or "LGICVU02"
"G_CURRENCY_FROM_CT_GET"
or
"SAPLGICV" "CURRENCY_EMPTY"
or
"FAGL_FC_VALUATION " "CURRENCY_EMPTY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
As per this dump i've searched SAP Notes in OSS. Unfortunately i couldn't find anything.
But i'm not getting this error when execute FCV for Open Items.
What could be the solution?
Please guide me.
Rgds
SwapnaHi Anuj,
Thanks for your response.
Actually no need to maintain currency in the main screen.
This is the problem with non-maintenance of currency for a company code. It will be fixed once we maintain the currency for that Company code.
Bye
Swapna -
Acrobat can not connect with the email program, what can I do?
Acrobat can not connect with the email program, what can I do?
Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you! -
When I click on an email address embedded in a web page, a page would open in my email program with this address in the "To" line. I recently installed Microsoft Office 2010 and now when I click on an email address nothing happens. I am not sure if this is due to Office 2010 or a Firefox problem. I use a PC with Vista.
https://support.mozilla.org/en-US/kb/change-program-used-open-email-links
-
How to get the output of a program into the email program.
hi
i had created a java mail program and the keygeneration program.seperately.
i want to get the keygeneration into my email program.that should be sent along with the text message.so pls help me in this regared.
i had pasted my coding her
email pgm.
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
To use this program, change values for the following three constants,
SMTP_HOST_NAME -- Has your SMTP Host Name
SMTP_AUTH_USER -- Has your SMTP Authentication UserName
SMTP_AUTH_PWD -- Has your SMTP Authentication Password
Next change values for fields
emailMsgTxt -- Message Text for the Email
emailSubjectTxt -- Subject for email
emailFromAddress -- Email Address whose name will appears as "from" address
Next change value for "emailList".
This String array has List of all Email Addresses to Email Email needs to be sent to.
Next to run the program, execute it as follows,
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "smtp.mail.yahoo.com";
private static final String SMTP_AUTH_USER = "xxxx";
private static final String SMTP_AUTH_PWD = "xxxx";
//private static final String emailMsgTxt = "Online Order Confirmation Message. Also include the Tracking Number.";
private static final String emailSubjectTxt = "Order Confirmation Subject";
private static final String emailFromAddress = "[email protected]";
private static String emailMsgTxt = "I am unable to attend to your message, as I am busy sunning"
+ "myself on the beach in Maui, where it is warm and peaceful."
+ "Perhaps when I return I'll get around to reading your mail."
+ "Or perhaps not.";
private static final String[] emailList = { "[email protected]","[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = true;
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.port", "25");
props.put("mail.smtp.protocol","smtp");
props.put("mail.debug", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
keygeneration program:
import java.io.Serializable;
import java.security.Security;
import com.sun.net.ssl.*;
import javax.crypto.KeyGenerator;
import javax.crypto.Mac;
import javax.crypto.SecretKey;
public class Eval {
public static void main(String args[]) throws Exception {
String inputString ="0x0b0b0b0b";
KeyGenerator keyGen = KeyGenerator.getInstance("HMACMD5");
SecretKey secretKey = keyGen.generateKey();
Mac mac = Mac.getInstance(secretKey.getAlgorithm());
mac.init(secretKey);
byte[] byteData = inputString.getBytes("UTF8");
byte[] macBytes = mac.doFinal(byteData);
String macAsString = new sun.misc.BASE64Encoder().encode(macBytes);
System.out.println("Authentication code is: " + macAsString);I'm not sure what's confusing you. Just generate a String (using a StringBuffer)
with the data you need and use it as the content of the mail message. If each
recipient needs different content, they'll each need a different MimeMessage
object. -
2 issues:
1. Firefox crashes every time I try to open QuickBooks online. I have submitted numerous crash reports.
2. When I click an email link on a web site, it opens a blank FF browser instead of an email program. I have set the default to Microsoft Outlook and also tried changing it to Gmail. Each time I click an email link on any web site, however, it just opens up a blank page instead of one of my email programs.I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
Which Google site did you search? -
FM ARCHIVE_SCHEDULE_JOB giving dump as background job?
Hello Everyone,
I am scheduling a report in SM37 which consists of FM ARCHIVE_SCHEDULE_JOB.
And based on the output of FM, some Ztables are updated and some jobs are created in sm37.
Now, when i debugged the background job, i found out that Fm is giving Dump 'NO_RUNTIME_INFO' since sy-batch is not initial.
Due to which Ztables are not updated but the jobs are created....
Can anyone please help me what should i do on this case?
Edited by: Suruchi Razdan on Jun 2, 2011 9:45 AMHi Akshay,
II have copied the Std workflow WS20000075 into a custom one and in the latest end tab, i have selected "Workitem creaton" for Refer Date/Time field and given 5 mins. I have deactivated the workflow in which i have created the containers for date and time and used "Expresion" for latest end and also commented the zmethod in delegated object. Even now also the job is getting cancelled with the same error.
Any idea why is it happening ?
regards,
Trimurty -
Why does my email template appear differently in various email programs?
I have created a CSS-style based email template using Dreamweaver CS6. The template looks great within Dreamweaver, on Internet Explorer and in Outlook 2003. However, when viewed in Outlook 2010, Hotmail and Gmail, the template is distorted. If I set my containers using pixel size, why would it be different when viewed in other email programs?
Here is my code:
<style type="text/css">
.pageborder {
width: 795px;
height: 995px;
border: medium solid #008478;
font-family: Verdana, Geneva, sans-serif;
font-size: 10pt;
margin: 0 auto;
.prodboxleft {
font-family: Verdana, Geneva, sans-serif;
font-size: 10pt;
background-color: #76c6be;
width: 370px;
float: left;
height: 164px;
border: medium dashed #008478;
margin-top: 5px;
margin-bottom: 5px;
margin-left: 12px;
.prodboxright {
font-family: Verdana, Geneva, sans-serif;
font-size: 10pt;
background-color: #76c6be;
width: 370px;
float: right;
height: 164px;
border: medium dashed #008478;
margin-top: 5px;
margin-right: 12px;
margin-bottom: 5px;
.clearing {
clear:both;
display:block;
visibility:hidden;
.pageborder .prodboxleft img {
padding: 8px;
.pageborder .prodboxright a img {
padding: 8px;
</style>
</head>
<body>
<div class="pageborder"><br /><center><img src="https://system.netsuite.com/core/media/media.nl?id=12679&c=723462&h=55e51819e92ef317c357" width="720" height="86" border="0" /><br /><br />
<a href="http://www.eyecareandcure.com/Diagnostic-Products"><img src="https://system.netsuite.com/core/media/media.nl?id=28469&c=723462&h=dc5c279154096ce1f361" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Pharmaceuticals"><img src="https://system.netsuite.com/core/media/media.nl?id=28474&c=723462&h=9365342d3d72baf4c0d2" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Exam-Room-Supplies"><img src="https://system.netsuite.com/core/media/media.nl?id=28470&c=723462&h=4f1b836f6412ab952e34" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Vision-Testing"><img src="https://system.netsuite.com/core/media/media.nl?id=28468&c=723462&h=3c7664689336406c15ee" width="195" height="40" border="0" /></a><br /><a href="http://www.eyecareandcure.com/Optical-Tools-Supplies"><img src="https://system.netsuite.com/core/media/media.nl?id=28473&c=723462&h=a227a48f3b29b0a38f7a" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Medical-Surgical-Supplies"><img src="https://system.netsuite.com/core/media/media.nl?id=28472&c=723462&h=c94240f73ea2a1647745" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Sterilizing-Disinfecting"><img src="https://system.netsuite.com/core/media/media.nl?id=28475&c=723462&h=5742c12d94b5c490d535" width="195" height="40" border="0" /></a><a href="http://www.eyecareandcure.com/Instruments"><img src="https://system.netsuite.com/core/media/media.nl?id=28471&c=723462&h=3e0b5322e37bf2b86796" width="195" height="40" border="0" /></a></center><br />
<font size="5"><b><center>Great Prices and February Shipping Special!</center></b></font><br />
<div class="prodboxleft"><a href="http://www.eyecareandcure.com/Drops/Fluoron-1532"><img src="https://system.netsuite.com/core/media/media.nl?id=1323&c=723462&h=24fddfba2d9dd33cb960" width="151" height="144" align="left" border="0" /><a/><br /><font size="4"><b>Fluoron<sup>®</sup> 5 ml</b></font><br /><em>Compare to Fluress<sup>®</sup></em><br /><font size="4"><b>$6.95</b></font><br />Was $8.90<br /><br />Item #1532</div>
<div class="prodboxright"><a href="http://www.eyecareandcure.com/Drops/Fluorocaine-8482"><img src="https://system.netsuite.com/core/media/media.nl?id=1324&c=723462&h=bff0adfc33d25c58f9a2" width="162" height="144" align="left" border="0" /></a><br /><font size="4"><b>Fluorocaine™ 5 ml</b></font><br /><br /><font size="4"><b>$7.30</b></font><br />Was $7.80<br /><br />Item #1533</div>
<hr class="clearing" /><div class="prodboxleft"><a href="http://www.eyecareandcure.com/Drops/Tropicamide-1-0-15-ml_2"><img src="https://system.netsuite.com/core/media/media.nl?id=3992&c=723462&h=b9c0ceeda9e5db57fbfd" width="61" height="144" align="left" border="0" /></a><br />
<font size="4"><b>Tropicamide 1.0% 15 ml</b></font><br />
<em>Compare to Mydriacyl<sup>®</sup></em><br />
<font size="4"><b>$8.40</b></font><br />
Was $10.80<br />
<br />
Item #1579</div>
<div class="prodboxright"><a href="http://www.eyecareandcure.com/Drops/Tropicamide-0-5-15-ml"><img src="https://system.netsuite.com/core/media/media.nl?id=28676&c=723462&h=3be84121296356649aa6" width="57" height="144" align="left" border="0" /></a><br /><font size="4"><b>Tropicamide 0.5% 15 ml</b></font><br />
<em>Compare to Mydriacyl<sup>®</sup></em><br />
<font size="4"><b>$8.20</b></font><br />
Was $10.50<br />
<br />
Item #1586</div>
<hr class="clearing" /><div class="prodboxleft"><a href="http://www.eyecareandcure.com/Drops/Phenylephrine-HCl-2-5-15-ml-Akorn-brand_2"><img src="https://system.netsuite.com/core/media/media.nl?id=9387&c=723462&h=e2293736ebaa71f5455b" width="53" height="144" align="left" border="0" /></a><br /><font size="4"><b>Phenylephrine 2.5% 15 ml</b></font><br />
<em>Compare to Neo-Synephrine<sup>®</sup></em><br />
<font size="4"><b>$9.00</b></font><br />
Was $10.25<br />
<br />
Item #1554</div>
<div class="prodboxright"><center>
<font size="4"><b>FEBRUARY SHIPPING SPECIAL!</b></font><br />www.eyecareandcure.com<br /><br /><font size="3"><b>Free Ground Shipping on all<br />internet orders over $200.00*</b></font><br />Enter Promo Code FEB13 during checkout<br /><br />
<font size="1">*Valid only on orders placed on our website from<br />
02/01/13-02/28/13. Not valid with any other promotional offer.</font>
</center></div><hr class="clearing" />
<center>To place your order, please visit our website at
<a href="http://www.eyecareandcure.com"><font color="#008579">www.eyecareandcure.com</font></a>, or call Customer Service<br />
at 1-800-486-6169. You can also
<a href="http://www.eyecareandcure.com/Monthly-Specials">
<font color="#008579">download</font></a> a
copy of this special and fax it to us at 1-877-321-1267.<br><br>Need access to our website?
<a href="http://www.eyecareandcure.com/Registration">
<font color="#008579">Click here</font></a> to register.<br />24-7 ordering, special offers, order
history and much, much more!<br /><br />
<font size="1"><em>All prices subject to change. Some additional restrictions may apply.<br />
See <a href="http://www.eyecareandcure.com/Terms-Policies"><font color="#008579">www.eyecareandcure.com/Terms-Policies</font></a> for standard terms and conditions.</em></font>
</center>
</div>
</div>
</body>
And here is a screen shot of the different results:If email marketing is new to you, the below links are a good starting point for how to go about getting a good-looking and consistent design.
http://kb.mailchimp.com/article/common-html-email-coding-mistakes
http://24ways.org/2009/rock-solid-html-emails/
http://htmlemailboilerplate.com/
The boilerplate is good for reference but in my opinion is overkill for most email campaigns. It does a good job of highlighting why they do certain things though.
Rik
Maybe you are looking for
-
Yoga 2 11 - issues with internet connection
Hi, I bought the pc three weeks ago for my boyfriend and after a few days the internet did not work anymore. I've tried using both portable key (tre) both the wifi and I can navigate only on gmail, all the others pages are unreachable. I thought it w
-
Unable to type text in Text Frame
After I draw a text box on my first page, I am unable to add text to it. There is nothing else on the that page, but the blinking cursor never shows up no matter how many times I click on the text frame. I checked for preflight errors, there is none.
-
How to save a SVG File in full black
Hello guys, i have a problem. there are some vector ai icons that i have and its needed to be saved as a svg file. the problem is that the icon must be saved as c-0 m-0 y-0 k-100 and its seems every time is save the file and reopen it to check it or
-
How do you configure Outlook to accept icloud?
Installing iCloud on my desktop, I got a screen that said my system was not outlook was not congfigured>
-
Screensaver wont use iphoto library since mountain lion
Since upgrading to mountain lion, my screensaver wont work with iphoto library... 27" 2.8GHZ iMac, 16 GB Ram. iPhoto library has around 24000 pics in it. Thanks.