Embeding pdf in aspx page and transfer its contents to server using live cycle

Hi,
     I am new in designing live cycle forms , My requirement is I want to send a pdf content data from client to server, i am using visualstudio 2005 ,
pls give me a solution for sending using live cycle designer , Is it possible to call a webservice using live cycle if so then how? please provide a sample application , I am waiting for reply

1) submitting form content from an interactive PDF to a server-side solution
Designer ES enables the submission of PDF, XDP+XML, XML, and form data via an an HTTP POST. The fact that a PDF is hosted in a HTML container produced by ASPX does not change the submission options. Could you be more specific about what you are looking for in the context of VS 2005?
2) calling a Web Service
Yes it is possible to call a Web Service from a client-side interactive PDF. You need to define a data connection to a SOAP endpoint and bind the input and output parameters to form fields. See LiveCycle Designer ES help http://livedocs.adobe.com/livecycle/8.2/acrobat_designer/000498.html.
Steve

Similar Messages

  • How can I  sync without losing content of my ipod and transfer its contents to itunes library

    How can I sync my ipod classic w/o losing content and therefore able to transfer its content to the itunes library?

    See this older post from another forum member Zevoneer covering the different methods available for copying content from your iPod back to your computer and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Using cfhttp to read a page and write its contents to a file.

    Hi,
    I am trying to get a feed of my ebay store listings to load
    into froogle. Unfortunately, ebay provides the feed as a website
    not a file and froogle (via GoogleBase) needs the file to be
    submitted as an XML file.
    Is there a way to use something like cfhttp to load up the
    page where the feed is located, scan the page and write it's
    contents into an XML file that I can then load up to GoogleBase???
    thanks for the help.

    ignore me now.... I answered my own question a short while
    ago.
    for anyone who cares....
    I used CFHTTP to get the page and then used a cffile to write
    the #cfhttp.filecontent# into the new file!

  • Swf reloaded autometically in aspx page and buttons dissappear from flash content

    Hi, I am facing a problem with flash content in aspx.
    After spending some time, the swf embeded in the aspx page is
    reloaded autometically ( without refresing the aspx page only swf
    reload ) and two buttons from that swf dissappear.
    I can't understand why the swf reload ?
    Can any one help me !!

    Hi,
    Thanks Darr_darshan.
    I had embed the swf directly. And the swf is reloaded using
    backend coding, so i can't get the idea about that how the swf is
    reloaded ?

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • How can i deploy a silverlight application when it contains an aspx page (And Aspx page content is a DevExpress Scheduler)

    I have a silverlight application. It has containing many navigation pages in it. One of this pages is containing an .aspx page and i have used devexpress scheduler on there. It is working perfect on development machine but on production machine when client
    logged and navigate to the scheduler page there is a message top of the page saying
    webbrowser is enabled only for out-of-browser applications running with elevated permissions in Internet Explorer.
    And i have found something like that
    https://msdn.microsoft.com/en-us/library/gg192793(v=vs.95)
    But I think my problem is not that in my project properties i always checked the require permission checkbox. i couldnt understand this behavior and how can i solve. I tryed to use .pfx file by adding in project properties signing tub. Even i couldnt understand
    how why are we using this certificate and is it interesting with it
    Also now i seen in my development machine when i opened this page a popup window come up this message:
    the current webpage is trying to open a site in your trusted sites list. Do you want to allow this?
    current site: res/npctrUI.dll
    Trusted site: localhost
    warning allowing this can expose your computer to security risk. If you dont trust the current page, choose no.
    regards
    Hamit YILDIRIM

    Things that require elevated trust will always work in visual studio.
    You need elevated trust to use the webbrowser inside a Silverlight page on a user's machine.
    That means purchasing a security certificate.
    https://msdn.microsoft.com/en-us/library/gg192793(v=vs.95)
    You can open up any old web page in another tab from Silverlight and I would suggest you consider that instead of using a webbrowser control inside a Silverlight page.
    Hope that helps.
    Technet articles: Uneventful MVVM;
    All my Technet Articles

  • I have a pdf file 50 pages and want add to 1st page a logo (icon png or gif or jpg), well I have cs4

    I have a pdf file 50 pages and want add to 1st page a logo (icon png or gif or jpg), well I have cs4 master collection... how do it?

    what is "pinch"? what cs4 program(s)
    to use for this?

  • I have an iPhone 3GS that I dropped in water. It still does everything but get service, can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one...

    I have an iPhone 3GS that I dropped in water for a moment. After drying it and everything, it still does everything but get service. Can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one... is this true? I would truly appreciate the help, please let me know, thanks!

    Sounds like your phone is in recovery mode.  In this case, all data on it is gone.  There's nothing to back up.

  • Can I save a PDF file to Pages and then work on it?

    Can I save a PDF file to Pages and then work on it?

    No. Pages does not edit PDF. Just does PDF an output.

  • Reading a properties file in a servlet and passing its contents to a JSP pa

    Hi all,
    I'm totally new to Servlet pgmg n JSP. Please can ne1 tell how to read a simple properties file (in a servlet) and pass its contents to a JSP page.Actually the reason is to fill a combo box in a JSP page with the contents of a properties file.If calling a servlet for the same is d best way to do that, plz can ne1 tell me :
    1> whether to override the doPost method in the servlet in which to read d file using FileInputStream
    2> Putting the contents in an array and then how to pass this array to the JSP page.
    Thanks,
    deepthy.

    I'm using a properties file to let my web application know what the name of the database is. I'm using an abstract class GeneralDao which will be extended by all the DAO's (Data Access Objects or java classes containing SQL statements).
    Here's the code :
    protected Connection getDatabaseConnection()
              throws Melding
         Connection dbconn = null;     
         ResourceBundle resBundle;
         try
         Class.forName("com.mysql.jdbc.Driver").newInstance();
         resBundle = ResourceBundle.getBundle("gcoConfig");
         String dbConnectie = resBundle.getString("databaseconnection");
         gcoLogger.debug("lezen databaseconnection in resourceBundle " );
         dbconn = DriverManager.getConnection(dbConnectie);
         } catch (InstantiationException exc)The ResourceBundle is used to read the properties file, named gcoConfig.properties.
    With the getString() command I read the content of the string named databaseconnection.
    The gcoConfig.properties file is placed inside the folder C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\gco\WEB-INF\classes
    The GeneralDao is placed in the folder C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\gco\WEB-INF\classes\org\gertcuppens\cluifDao.
    So this class is placed some folder below the WEB-INF\classes folder of gcoConfig.properties.
    And the content of the properties file is just one line :
    databaseconnection=jdbc:mysql://localhost/cluif
    If you want to let the JSP know what's inside the properties file, wrap the content in a Javabean, put it in the request or even the session and pass the control to the JSP.

  • Upload 2 files and compare its contents

    Hi guys,
    I want to upload 2 files in SAP and compare its contents.
    How am i going to do that?
    Please provide sample code... Thanks a lot!
    rgds,
    Mark

    Hi Mark,
    I expected to use this code, once u can try this code.
      OPEN DATASET lv_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        LOOP AT gi_output1 INTO gwa_output1.
          CLEAR lv_string.
          CONCATENATE gwa_output1-matnr
                      gwa_output1-maktx
                      gwa_output1-werks
                      gwa_output1-bmeng
                      gwa_output1-posnr
                      gwa_output1-idnrk
                      gwa_output1-ojtxp
                      gwa_output1-mngko
                      gwa_output1-mmein
                      gwa_output1-flag
                      INTO lv_string
                      SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
          TRANSFER lv_string TO lv_filename.
          IF sy-subrc <> 0.
            MESSAGE e006(zpdm).
          ENDIF.              "if sy-subrc <> 0.
        ENDLOOP.
         OPEN DATASET lv_filename FOR appending IN TEXT MODE ENCODING DEFAULT.
      IF gi_output2[] is not initial.
        LOOP AT gi_output2 INTO gwa_output2.
          CLEAR lv_string.
          CONCATENATE gwa_output2-matnr
                      gwa_output2-ojtxb
                      gwa_output2-werks
                      gwa_output2-bmeng
                      gwa_output2-posnr
                      gwa_output2-idnrk
                      gwa_output2-ojtxp
                      gwa_output2-mngko
                      gwa_output2-mmein
                      gwa_output2-flag
                INTO  lv_string
           SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
          TRANSFER lv_string TO lv_filename.
          IF sy-subrc <> 0.
            MESSAGE e007(zpdm). " WITH text-006.
          ENDIF.           "if sy-subrc <> 0.
        ENDLOOP.
      ENDIF.

  • I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    Try CardMunch it works well for me

  • Accessing a file and reading its contents.

    Hi all,
    I created a Portal Application to access a file and display its contents in an iView .
    But it showing the exception like "File Not Found".
    In simple java application i could able to get the result. In portal application i couldn't .
    I have given the full path of the file location.
    I need a help regarding this?
    Regards,
    Eben

    IS the file on the portal server? It must be visible to the service user that runs the Java engine...

  • How to create a file and store its contents into another file?

    Hi,
    I'm having some trouble trying to create a code where I have to to create a file and store its contents into another file?
    I read the API, but I'm not certain how this file thing works.
    Here's my code so far:
    public static void main(String[] args) throws Exception
              File file = new File("tasks.txt");
              if (file.exists())
                   System.out.println("File already exists");
                   System.exit(0);
              Scanner scan = new Scanner(System.in);
              Scanner scan2 = new Scanner(System.in);
              //Scans the input line by line
              scan.useDelimiter("\\n");
              //Scans the input by tabs
              scan2.useDelimiter("\\t");
              PrintWriter outputs = new PrintWriter("newtasks.txt");
              outputs.print("ok");
              outputs.println(3);
              outputs.close();
         }

    I managed to change my text into uppercase, but how do I store the uppercase content into another file.
    -So this is what I did so far, I took a text file and modified its strings to uppercase.
    -Now I need to put those modified strings into another text file, is there a way where I can do that with my current code?
    -I already tried printwriter, but it doesn't seem to work
    public static void main(String[] args)throws IOException
              //Task[] oneHundredTasks = new Task[100];
              String uppercase;
              String combine;
              Scanner scan = null;
              FileInputStream in = null;
            FileOutputStream out = null;
            PrintWriter output = null;
            try
                 scan = new Scanner(new BufferedReader(new FileReader("tasks.txt")));
                 scan.useDelimiter("\\n");
                 scan.useDelimiter("\\t");
                while (scan.hasNext())
                     if(!scan.hasNext())
                          scan.next();
                     combine = scan.next();
                     uppercase = combine.toUpperCase();
                     System.out.println(uppercase);
            finally
                if (scan != null)
                    scan.close();
            //The program will try the input and output files
            try
                 in = new FileInputStream("tasks.txt");
                out = new FileOutputStream("newtasks.txt");
                int c;
                //The number "-1" is used to indicate that it has reached the end of the stream.
                while ((c = in.read()) != -1)
                    out.write(c);
            finally
                if (in != null)
                    in.close();
                if (out != null)
                    out.close();
         }

  • How to browse a file and extract its contents

    i want to browse a file and extract its contents.My code is given below but its not working .Can anybody help me please
    JFileChooser fc = new JFileChooser();
              int returnVal = fc.showOpenDialog(jfrm);
              if (returnVal == JFileChooser.APPROVE_OPTION)
              File file = fc.getSelectedFile();
              //This is where a real application would open the file.
              fileName=file.getName();
              //This is a file function to extract data from a file.
              //It reads data from a file that can be viewed on cmd
              jlab3.setText(fileName);
              try
    // Open the file that is the first
    // command line parameter
    FileInputStream fstream = new FileInputStream(fileName);
    // Convert our input stream to a
    // DataInputStream
              DataInputStream in =new DataInputStream(fstream);
    // Continue to read lines while
    // there are still some left to read
    // while (in.available() !=0)
    // Print file line to screen
              fileName1=in.readLine();
              jlab3.setText(fileName1);
              in.close();
    catch (Exception e)
              System.err.println("File input error");
              }

    JFileChooser fc = new JFileChooser();
    int returnVal = fc.showOpenDialog(jfrm);
    if (returnVal == JFileChooser.APPROVE_OPTION)
    File file = fc.getSelectedFile();
    //This is where a real application would open the file.
    fileName=file.getName();
    //This is a file function to extract data from a file.
    //It reads data from a file that can be viewed on cmd
    jlab3.setText(fileName);
    try
    // Open the file that is the first
    // command line parameter
    FileInputStream fstream = new FileInputStream(fileName);
    // Convert our input stream to a
    // DataInputStream
    DataInputStream in =new DataInputStream(fstream);
    // Continue to read lines while
    // there are still some left to read
    // while (in.available() !=0)
    // Print file line to screenHere you are reading the first line of the file
      fileName1=in.readLine();
    //}and here you are displaying the line in a (I suppose) JLabel. A JLabel is not very suitable for displaying a file content, except is the file contain few characters !!!
    jlab3.setText(fileName1);
    in.close();
    catch (Exception e)
    System.err.println("File input error");
    }If you want to read the complete file content you must uncomment lines inside while instruction, like this
    while (in.available() > 0) {  // I prefer to test in.available like this, instead of !=
      // append text to a StringBuffer (variable named sb here) or directly in a textarea.
      sb.append(in.readLine());
    ...

Maybe you are looking for