Empty XML properties

In the weblogic-ra.xml that we are shipping with our RAR file, the
          <ra-link-ref> and <native-libdir> are just included for completeness, but
          don't include any values. They are being treated as non-null values in 6.1
          beta. I think there should be a test for both null and an empty-string,
          especially for the <ra-link-ref>, since an empty value will cause the RAR to
          be deployed, but no JNDI entry is created. These are just 2 examples that
          we have discovered, may exist for other cases.
          Eric

Hi Detlev
Thank you very much for your two answers. I will be looking into your answer regarding multivalued properties in the beginning of the next week.
Regarding this question:
Sorry, I wasnt precise at all. I am thinking of ComboBoxes when it comes to leaving the default value empty. When I use ComboBoxes, the form automatically selects the first value (and when I use Browsers, the input field stays empty as default).
But I would also like to enable the user to select more than one value from ComboBoxes and Browsers. But that doesnt seem possible.

Similar Messages

How to include the characters " " and " " in a XML properties file.

hi
including the following prop entry gives me the error "Element is not closed" error message.
<entry key="test">can't include chars < and ></entry>
But i need to include the chars "<" and ">" in my xml properties file.
please help.
thanks

Try < and >
Dave Patterson

Remove Empty XML Tags using module parameters

Hi All,
In my lanscape I have two PI Systems.
My scenario is an IDOC reaches 1st PI system gets converted into an EDIFACT and then goes to the 2nd PI and from there it gets routed to the respective AS2 Party.
I am using SOAP to pass message between the PI systems and B2B Toolkit's AS2 Adapter for the communication with AS2 party.
The issue is when the message is getting converted from IDOC to EDIFACT there are a few feilds with occurence 1..1 and due to these fields i get an empty XML tag at the output. These empty XML tags give me an error in the B2B Toolkit's AS2 Adapter Receiver Channel
I cannot change the occurence in the structure of the EDIFACT nor can I use an XSLT mapping to remove empty tags before the message reaches the Communication Channel.
I want to know if there are any module parameters which i can use either in SOAP Channel or the AS2 Channel to remove the XML Tags.

Hi Muni,
"1..1 means, you must send some values for that fields. try to find out why these are not getting any values."
This empty tag is expected. Before using B2B Toolkit's AS2 Adapter we used to use Seeburger's AS2 Adpater and the message used to get executed successfully with these empty tags.The issue is coming only when we are using B2B Toolkit's AS2 Adapter.
"if you want to stop sending(the fields which are not needed in target) you can you can disable the fields in the message mapping."
I cannot disable the feild in the mapping as some other message may use this field.
Thanks,
Farhaan

Delete empty rows while having empty xml tag

I've seen something like same but it doesn't work for me. I have a table which is created using xml rules, some time it contains empty xml tag also converted into row but I don't want these empty rows. After table creation empty rows need to be deleted.
I've got this script from this forum which delete empty rows
for(var i=myDocument.textFrames.length-1; i>=0; i--){
for(var j=myDocument.textFrames[i].tables.length-1; j>=0; j--){
   for(var k=myDocument.textFrames[i].tables[j].rows.length-1; k>=0; k--){
    myContents = 0;
    for(var l=myDocument.textFrames[i].tables[j].rows[k].cells.length-1; l>=0; l--){
     if (myDocument.textFrames[i].tables[j].rows[k].cells[l].contents != "") myContents++;
     if (myContents == 0) myDocument.textFrames[i].tables[j].rows[k].remove();
but incase of any cell contains empty xml element it goes blank. Could any one help on this.
Thanks
Mac

Gyan,
Thanks for your help. I have modified the code as below:
public void removeblankline()
OAViewObject rvo = (OAViewObject)findViewObject("NCRPaymentExtLineVO1");
Row row[] = rvo.getAllRowsInRange();
System.out.println("Remove all blank rows");
System.out.println("Total Rows"+rvo.getRowCount());
int jcount = rvo.getRowCount();
for (int j=0;j< jcount;j++)
NCRPaymentExtLineVORowImpl rowj = (NCRPaymentExtLineVORowImpl)row[j];
System.out.println("Check Line Number: "+j);
System.out.println("Line Type Lookup Code: "+rowj.getLineTypeLookupCode());
if((rowj.getLineTypeLookupCode()==null)||("".equals(rowj.getLineTypeLookupCode().trim())))
System.out.println("Removed Line Number: "+j);
rowj.remove();
System.out.println("Processed with Line Number: "+j);
} // end removeblankline
This is the change I have done:
int jcount = rvo.getRowCount();

Invoking a process to return a SQL query as XML results in empty XML tag (but testing the SQL works)

I have a process that runs a SQL query and returns the results as XML. When I test the query in the Process Properties tab in Workbench it appears to execute just fine. I can also test the XML information and see that the results are coming back correctly. But when I invoke the process I get an emtpy XML tag with no results. Recording the invocation and playing back the recording doesn't tell me anything useful. Has anyone ever seen this issue before? I don't understand why everything within the process seems to bring back results just fine but invoking it returns nothing.

Unfortunately I am not the admin for our LiveCycle instance and do not have access to the server logs (long story). I also am not authorized to share any LCA files for this project. Thanks though.

Submit by Email results in empty XML

Hi all,
I created a simple Adobe Form with Tx. SFP, added "Submit by Email" button and when I execute it from SFP and click on the button, the attached XML is empty (no info typed in the PDF, only tags).
Already installed the license. What am I missing?
When I create the exact same PDF using Adobe LiveCycle Designer outside SAP, works OK.
Thanks in advance.

Hello Andrés,
I think you have this issue because you use an ABAP-based interface for your form. Only when you use an xml-based interface, the entries are in the xml included when you use the email-button.
When you need the abap-based interface, then you have to attach not the xml but the complete pdf to the email.
Regards,
Holger

JSF and XML propertie File instead DOTpropertie File

Hello
I'll would like to load resources in JSF (<f:loadBundle>)
Coming out by a xml File instead a .propertie File.
I've got no problem get resources stored in .properties
I try to change the files. Al I get is a exception throw by
org.apache.myfaces.taglib.core.LoadBundleTag resolveBundle
Resource bundle 'com.webapp.navigation.' could not be found.
Where did I find some information about?
Where is it to configure?
The Servletcontainer is Tomcat.
Thank You
esion
.

Thank You,
it's realy a good idea to rtfm :-)
esion

Cannot Rebuild iphoto Library - empty xml file

I keep my photos on an external hard drive - and last night i accidentally disconnected the hard drive while i was using iPhoto. iPhoto quit automatically as the library it was using vanished.
When i tried to restart the library after reconnecting the hard drive iPhoto is showing that there are no photos and no events. I checked the package contents and the photos (7000+) are all still there.
So i tried to rebuild the library using iphoto library manager after reading some other similar posts. Unfortunately, iPhoto library manager tells me that the library cannot be rebuilt as the xml file is empty.
Please don't tell me that i have to recreate this library - i had 100+ albums, dozens of web galleries, multiple calendars, etc. and i just can't bear the thought of losing all those hours of work. Please tell me there is another solution!
Jesse

Jesse
Welcome to the Apple Discussions.
Are you sure iPhoto is pointing at the right library?
hold down the option (or alt) key when launching iPhoto. Select 'Choose Library' and navigate to the library on the disk.
If that fails, then you won't have to recreate all the library - just restore your back up.
You do have a back up, don't you?
Otherwise:
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Is it possible to remove XML properties from a PDF form?

I created a PDF version of our employment application in Acrobat and Live Cycle Designer. I'm knew to Acrobat and somewhere along the line, must have turned on XML. Now I want to combine the application with another document but I can only do that as a package, which I have done, but it throws people off and I'd rather make one document that's not a package. I can't do that with an Adobe XML
Is it possible to turn off XML without recreating the document?

Not really without hacking the PDF form you created. If you still want to go that way and the form is NOT a dynamic form then find a utility like WindJack's PDF CanOpener. Make a copy of the document and open it in either Acrobat with PDF CanOpener plug-in and navigate through the PDF innards and find the XFA dictionary and delete it. Then Save the document. You will need to re-edit and arrange any JavaScript actions in the saved form because Acrobat and Designer use two different JS engines.
Ta
Rocky

How to set minimum height size for an empty XML Form iview

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

Suddenly hundreds of "sent" messages disappeared. Folder is empty, but 'properties' says there are 679 messages. So not deleted I guess. But where are they?

The only thing I changed before this happened was the 'retention' policy in my account settings with respect to retaining/deleting messages on the server. I had that set at 'never delete' while I was away for a week, but changed it to delete after 7 days on my return today. All sent messages then disappeared on the server, and I discovered later to my surprise in my computer as well. Next to the "Sent" folder in the computer there's now a small square that's filled in darkly. I don't know if the square was there before, but I'm pretty sure it wasn't dark if it was there at all. I really need those 'sent' messages - at least the most recent ones. Does anyone have any idea what's going on? Also - I could do a 'system restore', but have the feeling that won't affect my Thunderbird account at all. Is that right?

I suspect your account is an IMAP account. With IMAP all mail is managed on the server. If you delete a message in Thunderbird it is removed on the server as well, and vice versa.
So I think what happened is what's described in the article in the
'It's just doing what you told it to do' section.
More details in this article.
http://kb.mozillazine.org/Message_aging
If you want to avoid messages being deleted set the retention policy to 'never delete'.
I don't think I understand what 'a small square that's filled in darkly' is.
A system restore won't do you any good as the Thunderbird profile isn't covered.
Miscellaneous.msf won't help. Msf files are index files, and do not contain any messages.
Your best bet is to restore a backup of your profile.

How to access System properties in xml file

hi,
i want to read system properties in my xml file using ${} .
I tried it but did not find any way.But when i use log4j if i set some variable in
System properties that properties is read by the log4j.properties .
I am writing a simple program that read a xml properties file file
try {
            props   = new Properties();
            fis     = new FileInputStream(xmlFile);
            props.loadFromXML(fis);
}before reading this file i set some properties and accessing this properties from that xml .but i cant.
Thanks

sabre150 wrote:
fun_with_java wrote:
can you give some example?Not really - I would have to write the code for you and I'm not getting paid for writing your code.Thanks for your kindness.
I dont ask you to write the code.Need some help to start it .Actually i dont have knowledge that
whether xml file automatically read it or i have prase the system property manually. Now i got the way to
access system property in xml..
Ok thanks again..
Thanks & Regards

Error during XML = ABAP conversion, empty tag

Hi.
Im sending data from a Data Base to a proxy using BI.
But when I get an empty response from the data base wich gives me an empty XML tag the proxy shows me an error:
-PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-System expected the end of the element 'STMT_DC_response'
This is the message that originates the fail:
<?xml version="1.0" encoding="utf-8" ?>
<ns0:MT_PRV23_BS_desg_response xmlns:ns0="urn:tompla-com:xi:ventas_SD">
<STMT_response>
<row>
   <TIPO>P</TIPO>
   <NUM_OT>55062330</NUM_OT>
   <NUM_DESGLOSE>1</NUM_DESG>
   <CANT_DESG>1724000</CANT_DESG>
</row>
</STMT_response>
<STMT_DC_response />
</ns0:MT_PRV23_BD_desg_response>
In case that the tag is filled runs ok
<?xml version="1.0" encoding="utf-8" ?>
<ns0:MT_PRV23_BD_desg_response xmlns:ns0="urn:tompla-com:xi:ventas_SD">
<STMT_response>
   <row>
    <TIPO>P</TIPO>
    <NUM_OT>55062330</NUMERO_OT>
    <NUM_DESG>1</NUM_DESG>
    <CANT_DESG>1724000</CANT_DESG>
   </row>
</STMT_response>
<STMT_DC_response>
   <row>
    <TIPO>P</TIPO>
    <NUMERO_OT>55062330</NUMERO_OT>
    <NUMERO_DESGLOSE />
    <COD_CAR_ADICIONA>8</COD_CAR_ADICIONA>
    <PORC_CAR_ADICION>1</PORC_CAR_ADICION>
</row>
</STMT_DC_response>
</ns0:MT_PRV23_BD_desg_response>
The definition for the data is:
STMT_DC_response        0..1
row                               0..n
    tipo                             0..1
Thanks for the help you can give me about my problem with empty tags.

I moved this question to other forum
Expert Forums » SAP NetWeaver » Exchange Infrastructure

XML - ABAP conversion, empty tag

Hi.
Im sending data from a DB to a proxy using XI.
But when I get an empty response from the DB, wich gives me an empty XML tag the proxy shows me an error:
-PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-System expected the end of the element 'STMT_DC_response'
This is the message that originates the fail:
<ns0:MT_xxx_response xmlns:ns0="urn:s-com:xi:SD">
<STMT_response>
<row>
   <c11>P</c11>
   <c12>55062330</c12>
   <c13>1</c13>
</row>
</STMT_response>
<STMT_DC_response />
</ns0:MT_xxx_response>
In case that the tag is filled runs ok
<ns0:MT_xxx_response xmlns:ns0="urn:s.com:xi:SD">
<STMT_response>
   <row>
    <c11>P</c11>
    <c12>55062330</c12>
    <c13>1</c13>
   </row>
</STMT_response>
<STMT_DC_response>
   <row>
    <c21>P</c21>
    <c22>55062330</c22>
    <c23 />
</row>
</STMT_DC_response>
</ns0:MT_xxx_response>
The definition for the data is:
STMT_DC_response        0..1
row                               0..n
    tipo                             0..1
Thanks for the help you can give me about my problem with empty tags.

thanks for your help!
yes, The definition for the data is:
STMT_DC_response    0..1
to be sure I disabled that node, so I wont get it from the DB, and It was ok
this is ok:
<ns0:MT_xxx_response xmlns:ns0="urn:s-com:xi:SD">
<STMT_response>
<row>
<c11>P</c11>
<c12>55062330</c12>
<c13>1</c13>
</row>
</STMT_response>
</ns0:MT_xxx_response>
but this is not
<ns0:MT_xxx_response xmlns:ns0="urn:s-com:xi:SD">
<STMT_response>
<row>
<c11>P</c11>
<c12>55062330</c12>
<c13>1</c13>
</row>
</STMT_response>
<STMT_DC_response />
</ns0:MT_xxx_response>

Find files with empty properties

Hi experts,
We use SAP KM and have some properties which are mandatory when you upload a file.
Now we have the problem, that there are still some files in the KM with empty (mandatory) properties, e.g. when they are uploaded with the portal drive.
Is there a way to find these files? With a KM report, with the TREX (is it possible to search for NULL in the fields), ...?
Best regards,
Manuel

Hi,
You can ofcourse write a KM Report, which iterates through all KM Resources and check for this property for null.
Check this to know, how to create custom KM Report:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9ddf91ce-0201-0010-3a86-9f4162bd348f
If you still have questions, let me know.
Regards,
Praveen Gudapati

Empty XML properties

Similar Messages

Maybe you are looking for