Enable Intel Virtual Technology - G450

Hello everyone,
Greetings!
I bought Lenovo G450. Originally the OS is Windows Vista I reformat it and install Windows 7 Ultimate. I want to enable the Virtualization Technology cause I want to install the Windows XP mode in my Windows 7 Ultimate OS. but when I go to BIOS i cant see the VT features from the BIOS. Is Lenovo G450 supported VT technology features?
Below is my BIOS information.
Product Name: Lenovo G450
BIOS Version: 18CN29WW(V2.02)
E.C Version: 18EC24WW(V2.00)
UUID Number: 19226D6A789011DE962E00262204091F
CPU Type: Intel(R) Core(TM) 2 DUO CPU T6600
CPU Speed: 2.20 Ghz
Total Memory: 4096 MB
Any comment/suggestion is highly appriciated. Thank you
Regards,
Andrian

I can't see any VT option from the BIOS. it means the Lenovo G450 is not supported for Virtual Techonolgy? How come, this Lenovo G450 is a new model in the market right. but why not include this VT features?
     If the BIOS doesn't show it, then it can't run it, you're right there.   I have read on other forums where people have crafted BIOS revisions to allow some computers to run VT (when the BIOS is the only reason VT is impossible).    There are lots of new models that exclude VT by design, you are not the only one complaining.
    On March 18 Microsoft announced:
     Windows XP Mode no longer requires hardware virtualization technology. This change simplifies the experience by making virtualization more accessible to many more PCs for small and midsize businesses wanting to migrate to Windows 7 Professional or higher editions, while still running Windows XP-based productivity applications.
    Some of Microsoft's pages do not reflect this change & will give users the impression that hardware virtualization is necessary to run Win XP Mode on Win 7.   I believe there is an extra bit of Microsoft software you must download if hardware virtualization isn't possible on your Win 7 machine, to enable the other Win XP Mode software to run.    XP Mode has some other requirements even though the requirement for hardware virtualization has been dropped.
    Supposedly XP Mode runs slower on machines without hardware virtualization.

Similar Messages

Satellite U500 - How to enable Intel virtualization technology?

How to enable Intel Virtualization Technology on Satellite U500 or if this feature is already available or not because im VMware configure in my laptop and when I wont to run it I'm getting the message
*You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host does not support VT.*
By the way my Laptop is Core2duo, Windows 7 Home Premium 64bit, RAM 3GB

Hi hersi,
Yes, thats the important model number.
According the Toshiba website your model has Intel Core2Duo T6600 CPU. So I have checked the Intel page directly and T6600 CPU doesnt support Intel Virtualization Technology (VT-x). You can check this yourself:
http://ark.intel.com
Unfortunately there is no option to enable Virtualization :(

Problem with the intel vitrualization technology

when i tried to install intel HAXM program it is failed to install a display a message i.e:this computer meets the requirements for HAXM, but intel virtualization technology (VT-x) is not turned on. 'HAXM cannot be installed until VT-x is enabled. please refer to the intel HAXM doceumentation for more information.and then i go to BIOS setup and enabled " INTEL VIRTUALIZATION TECHNOLOGY " but i have same problem after enabled.what i supposed to do..........?

Hi,
You could have wrong drivers...........
Or onboard Lan faulty.......
This is guess on info you have supplied.
Del Uk

Intel Virtulization Technology. HAXM can not be installed till VT-x is enabled

Trying to install Android Studio Bundle. When i Do i get an error message. === Logging started: 7/28/2015 3:11:58 ===
This computer meets the requirements for HAXM, but Intel Virtualization Technology (VT-x) is not turned on. HAXM cannot beinstalled until VT-x is enabled.
Please refer to the Intel HAXM documentation for more information.
=== Logging stopped: 7/28/2015 3:12:23 === Ive looked through other post on this type of error but im having no luck. things arent matching up.

Is there a reason you have not invoked the BIOS and turned the virtualization support on yet? Press the power button and immediately begin tapping the Esc key to invoke the startup menu. In the startup menu press the F10 key. The system configuration tab has what you need. Enable virtualization technology and then press the F10 key to save and restart your notebook.

Enabling Intel AMT (Active Management Technology)

I have a P67A-G45 and would like to be able to remotely administer my desktop PC with Intel AMT.
I have BIOS 1.A and have installed the latest Intel Management Engine Driver for P67/H67 from the MSI website. In Device Manager, I have Intel(R) Management Engine Interface in System Devices.
I've downloaded Intel SCS, but when I run the wizard, I get the message "This system does not support Intel AMT, and therefore cannot be configured."
There doesn't seem to be any option for Intel AMT in the BIOS.
Is it possible to enable Intel AMT on this board?
Thanks.

Google is your friend if you want to look for answers on your own.
To use AMT:
Hardware requirements for desktop PCs with Intel vPro
Desktop PCs with vPro (called “Intel Core 2 with vPro technology”) require:
* For AMT release 5.0:[30]
o Intel Core2 Duo processor E8600, 8500, and E8400 ; 45 nm Intel Core2 Quad processor Q9650, Q9550, and Q9400.
o Intel Q45 (Eaglelake-Q) Express Chipset with ICH10DO.
* For AMT release 3.0, 3.1, and 3.2:[2][5][6]
o Intel Core2 Duo processor E6550, E6750, and E6850; 45 nm Intel Core2 Duo processor E8500, E8400, E8300 and E8200; 45 nm Intel Core2 Quad processor Q9550, Q9450 and Q9300.
o Intel Q35 (Bearlake-Q) Express Chipset with ICH9DO.
Note that AMT release 2.5 for wired/wireless laptops and AMT release 3.0 for desktop PCs are concurrent releases.
* For AMT release 2.0, 2.1 and 2.2:[5][7][29]
o Intel Core 2 Duo processor E6300, E6400, E6600, and E6700.
o Intel Q965 (Averill) Express Chipset with ICH8DO.

Is LENOVO G50-80 80L0006CIN supports Intel Vertualization Technology ?

Hi All, I want to purchage ENOVO G50-80 80L0006CIN. I want to run Virtual PC through Oracle Vertual Mechine or VMWare Player to run 64 bit OS (Linux CentOS) on Windows 7 64 bit host. Is this laptop supports Intel Vertulaization (is there option to enable VT-x in BIOS)? Is LENOVO G50-80 80L0006CIN supports Intel Vertualization Technology (to run Virtual PC - 64bit guest OS on 64 bit host OS) ? Thanks,Shankar

UPDATE!!! If I select "only 802.11g" on the router I can connect.
A bit strange. I'm open to any suggestions, but at least I can connect now.

Is LENOVO G50-70 442243 supports Intel Vertualization Technology

Hi All, I want to purchage LENOVO G50-70 442243. I want to run Virtual PC through Oracle Vertual Mechine or VMWare Player to run 64 bit OS (Linux CentOS) on Windows 7 64 bit host. Is this laptop supports Intel Vertulaization (is there option to enable VT-x in BIOS)? Is LENOVO G50-70 442243 supports Intel Vertualization Technology (to run Virtual PC - 64bit guest OS on 64 bit host OS) ? Thanks,Shankar

Yes I am sure. For example something that happens always is get stuck when I have oppened: Android Studio - programming platform - , itunes and google chrome. I thought that It is mistake of my laptop but as I read in other threads is a common and unsolvable till now problem.

External monitor not detected on Thinkpad W530 intel-virtual-output

I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
$ optirun true
$ intel-virtual-output
Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00*+ 50.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
How can I debug this? Why is the external screen not detected any more?

Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
Below is my log with an external screen connected via Mini DisplayPort and after running:
$ optirun true
$ intel-virtual-output
a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
╰─➤ cat /var/log/Xorg.0.log 1 ↵
[ 2.616]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2.616] X Protocol Version 11, Revision 0
[ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
[ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
[ 2.616] Build Date: 09 January 2014 08:47:24AM
[ 2.616]
[ 2.616] Current version of pixman: 0.32.4
[ 2.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
[ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.627] (==) No Layout section. Using the first Screen section.
[ 2.627] (==) No screen section available. Using defaults.
[ 2.627] (**) |-->Screen "Default Screen Section" (0)
[ 2.627] (**) | |-->Monitor "<default monitor>"
[ 2.628] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.628] (==) Automatically adding devices
[ 2.628] (==) Automatically enabling devices
[ 2.628] (==) Automatically adding GPU devices
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.638] (II) Loader magic: 0x804c80
[ 2.638] (II) Module ABI versions:
[ 2.638] X.Org ANSI C Emulation: 0.4
[ 2.638] X.Org Video Driver: 15.0
[ 2.638] X.Org XInput driver : 20.0
[ 2.638] X.Org Server Extension : 8.0
[ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.589] Initializing built-in extension Generic Event Extension
[ 3.589] Initializing built-in extension SHAPE
[ 3.589] Initializing built-in extension MIT-SHM
[ 3.589] Initializing built-in extension XInputExtension
[ 3.589] Initializing built-in extension XTEST
[ 3.589] Initializing built-in extension BIG-REQUESTS
[ 3.589] Initializing built-in extension SYNC
[ 3.589] Initializing built-in extension XKEYBOARD
[ 3.589] Initializing built-in extension XC-MISC
[ 3.589] Initializing built-in extension SECURITY
[ 3.589] Initializing built-in extension XINERAMA
[ 3.589] Initializing built-in extension XFIXES
[ 3.589] Initializing built-in extension RENDER
[ 3.589] Initializing built-in extension RANDR
[ 3.589] Initializing built-in extension COMPOSITE
[ 3.589] Initializing built-in extension DAMAGE
[ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.589] Initializing built-in extension DOUBLE-BUFFER
[ 3.589] Initializing built-in extension RECORD
[ 3.589] Initializing built-in extension DPMS
[ 3.589] Initializing built-in extension Present
[ 3.590] Initializing built-in extension DRI3
[ 3.590] Initializing built-in extension X-Resource
[ 3.590] Initializing built-in extension XVideo
[ 3.590] Initializing built-in extension XVideo-MotionCompensation
[ 3.590] Initializing built-in extension XFree86-VidModeExtension
[ 3.590] Initializing built-in extension XFree86-DGA
[ 3.590] Initializing built-in extension XFree86-DRI
[ 3.590] Initializing built-in extension DRI2
[ 3.590] (II) "glx" will be loaded by default.
[ 3.590] (II) LoadModule: "dri2"
[ 3.590] (II) Module "dri2" already built-in
[ 3.590] (II) LoadModule: "glamoregl"
[ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3.615] compiled for 1.15.0, module version = 0.6.0
[ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.615] (II) LoadModule: "glx"
[ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.618] (II) Module glx: vendor="X.Org Foundation"
[ 3.618] compiled for 1.15.0, module version = 1.0.0
[ 3.618] ABI class: X.Org Server Extension, version 8.0
[ 3.618] (==) AIGLX enabled
[ 3.618] Loading extension GLX
[ 3.618] (==) Matched intel as autoconfigured driver 0
[ 3.618] (==) Matched intel as autoconfigured driver 1
[ 3.618] (==) Matched modesetting as autoconfigured driver 2
[ 3.618] (==) Matched fbdev as autoconfigured driver 3
[ 3.618] (==) Matched vesa as autoconfigured driver 4
[ 3.618] (==) Assigned the driver to the xf86ConfigLayout
[ 3.618] (II) LoadModule: "intel"
[ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.623] (II) Module intel: vendor="X.Org Foundation"
[ 3.623] compiled for 1.15.0, module version = 2.99.911
[ 3.623] Module class: X.Org Video Driver
[ 3.623] ABI class: X.Org Video Driver, version 15.0
[ 3.623] (II) LoadModule: "modesetting"
[ 3.624] (WW) Warning, couldn't open module modesetting
[ 3.624] (II) UnloadModule: "modesetting"
[ 3.624] (II) Unloading modesetting
[ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.624] (II) LoadModule: "fbdev"
[ 3.624] (WW) Warning, couldn't open module fbdev
[ 3.624] (II) UnloadModule: "fbdev"
[ 3.624] (II) Unloading fbdev
[ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.624] (II) LoadModule: "vesa"
[ 3.624] (WW) Warning, couldn't open module vesa
[ 3.624] (II) UnloadModule: "vesa"
[ 3.624] (II) Unloading vesa
[ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 3.624] (++) using VT number 1
[ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 3.625] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.625] (==) intel(0): RGB weight 888
[ 3.625] (==) intel(0): Default visual is TrueColor
[ 3.625] (**) intel(0): Framebuffer tiled
[ 3.625] (**) intel(0): Pixmaps tiled
[ 3.625] (**) intel(0): "Tear free" disabled
[ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 3.625] (II) intel(0): Output LVDS1 has no monitor section
[ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 3.625] (II) intel(0): Output VGA1 has no monitor section
[ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[ 3.625] (==) intel(0): DPI set to (96, 96)
[ 3.625] (II) Loading sub module "dri2"
[ 3.625] (II) LoadModule: "dri2"
[ 3.625] (II) Module "dri2" already built-in
[ 3.625] (==) Depth 24 pixmap format is 32 bpp
[ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 3.627] (==) intel(0): Backing store enabled
[ 3.627] (==) intel(0): Silken mouse enabled
[ 3.628] (II) intel(0): HW Cursor enabled
[ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.628] (==) intel(0): DPMS enabled
[ 3.628] (II) intel(0): [DRI2] Setup complete
[ 3.628] (II) intel(0): [DRI2] DRI driver: i965
[ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
[ 3.628] (==) intel(0): hotplug detection: "enabled"
[ 3.628] (--) RandR disabled
[ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.650] (II) AIGLX: Loaded and initialized i965
[ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.732] (II) LoadModule: "evdev"
[ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.734] (II) Module evdev: vendor="X.Org Foundation"
[ 3.734] compiled for 1.15.0, module version = 2.8.2
[ 3.734] Module class: X.Org XInput Driver
[ 3.734] ABI class: X.Org XInput driver, version 20.0
[ 3.734] (II) Using input driver 'evdev' for 'Power Button'
[ 3.734] (**) Power Button: always reports core events
[ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.734] (--) evdev: Power Button: Found keys
[ 3.734] (II) evdev: Power Button: Configuring as keyboard
[ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.734] (**) Option "xkb_rules" "evdev"
[ 3.734] (**) Option "xkb_model" "pc104"
[ 3.734] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3.755] (II) No input driver specified, ignoring this device.
[ 3.755] (II) This device may have been added with another device file.
[ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3.755] (**) Sleep Button: always reports core events
[ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3.755] (--) evdev: Sleep Button: Found keys
[ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
[ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
[ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3.755] (**) Option "xkb_rules" "evdev"
[ 3.755] (**) Option "xkb_model" "pc104"
[ 3.755] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
[ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
[ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 3.756] (**) Integrated Camera: always reports core events
[ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
[ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
[ 3.756] (--) evdev: Integrated Camera: Found keys
[ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
[ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
[ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 3.756] (**) Option "xkb_rules" "evdev"
[ 3.756] (**) Option "xkb_model" "pc104"
[ 3.756] (**) Option "xkb_layout" "se"
[ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
[ 3.757] (II) No input driver specified, ignoring this device.
[ 3.757] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.757] (**) Option "xkb_rules" "evdev"
[ 3.757] (**) Option "xkb_model" "pc104"
[ 3.757] (**) Option "xkb_layout" "se"
[ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.757] (II) LoadModule: "synaptics"
[ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
[ 3.758] compiled for 1.15.0, module version = 1.7.4
[ 3.758] Module class: X.Org XInput Driver
[ 3.758] ABI class: X.Org XInput driver, version 20.0
[ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.758] (**) Option "Device" "/dev/input/event12"
[ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.783] (**) Option "TapButton1" "1"
[ 3.783] (**) Option "TapButton2" "2"
[ 3.783] (**) Option "TapButton3" "3"
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3.794] (II) No input driver specified, ignoring this device.
[ 3.794] (II) This device may have been added with another device file.
[ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3.794] (**) ThinkPad Extra Buttons: always reports core events
[ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 3.795] (**) Option "xkb_rules" "evdev"
[ 3.795] (**) Option "xkb_model" "pc104"
[ 3.795] (**) Option "xkb_layout" "se"
[ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 3.824] (II) UnloadModule: "synaptics"
[ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.824] (**) Option "Device" "/dev/input/event12"
[ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.844] (**) Option "TapButton1" "1"
[ 3.844] (**) Option "TapButton2" "2"
[ 3.844] (**) Option "TapButton3" "3"
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 3.855] failed to find screen to remove
[ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
[ 3.855] (II) config/udev: removing device Video Bus
[ 3.863] (II) evdev: Video Bus: Close
[ 3.863] (II) UnloadModule: "evdev"
[ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.863] (**) Video Bus: always reports core events
[ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.863] (--) evdev: Video Bus: Found keys
[ 3.863] (II) evdev: Video Bus: Configuring as keyboard
[ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.863] (**) Option "xkb_rules" "evdev"
[ 3.863] (**) Option "xkb_model" "pc104"
[ 3.863] (**) Option "xkb_layout" "se"
[ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
[ 3.863] (II) config/udev: removing device Video Bus
[ 3.870] (II) evdev: Video Bus: Close
[ 3.870] (II) UnloadModule: "evdev"
[ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.870] (**) Video Bus: always reports core events
[ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.870] (--) evdev: Video Bus: Found keys
[ 3.870] (II) evdev: Video Bus: Configuring as keyboard
[ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.870] (**) Option "xkb_rules" "evdev"
[ 3.870] (**) Option "xkb_model" "pc104"
[ 3.870] (**) Option "xkb_layout" "se"
[ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
[ 4.540] (II) intel(0): Printing DDC gathered Modelines:
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 7.358] (**) Option "Emulate3Buttons" "false"
[ 7.358] (**) Option "EmulateWheel" "true"
[ 7.358] (**) Option "EmulateWheelButton" "2"
[ 7.358] (**) Option "YAxisMapping" "4 5"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 7.358] (**) Option "XAxisMapping" "6 7"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
[ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 7.359] (II) No input driver specified, ignoring this device.
[ 7.359] (II) This device may have been added with another device file.
[ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

Resume to black screen after starting intel-virtual-output (Optimus)

Hi everybody,
On resume my laptop shows a black screen with a single white underscore in the top left area every time I use intel-virtual-output. I can't access any terminals either, I have to do a hard reboot. The problem occurs even if no external monitors are connected when I launch ivo. It also if I kill ivo. However, suspend/resume works properly when not using intel-virtual-output.
I've tried different versions of the xf86-video-driver, including:
2.99.914-4 from extra
2.99.914.78 from aur (git version)
2.99.914.81 from aur (git version)
I also tried setting i915.i915_enable_rc6=0 to no avail.
My computer is an HP ZBOOK 15
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208GLM [Quadro K610M] (rev ff)
I haven't found any suspend/resume bugs specific to launching intel-virtual-output.
Any help is greatly appreciated
Last edited by rudametw (2014-09-01 19:01:39)

I have a similar issue.
I also have a ZBook 15, with an extended docking station (the huge one) and I would like to run two additional monitors with it. One through the docking station's VGA port and one with the docking station's DVI port.
The only way I have succeeded in making the two monitors working is by DISABLING the BIOS option for "hybrid cards" and using the nvidia drivers. In that case I get horrendous graphics performance (80 fps on glxgears) but all three monitors (two external and the laptop screen) are correctly identified by both the Displays app of Gnome3 and by the xrandr command line tool.
With the "hybrid cards" BIOS option is ENABLED or AUTO, only my VGA monitor is identified. Graphics performance is excellent, running optirun glxgers returs 3200fps, but the DVI monitor, although connect the same way as before remains blank and neither Displays or xrandr can detect it.
Running intel-virtual-output -f in a separate terminal does not seem to be doing anything special.
Runing:
optirun nvidia-settings -c :8
seems to load the nvidia settings (whereas running only "optirun nvidia-settings" with no additional parameters) complains that "You do not appear to be using the NVIDIA X driver"
I have no idea how to activate that extra DVI monitor (tried both DVI ports in case there is a primary or secondary, it doesn't make any difference. It was in the right DVI port (as you are looking over the docking station when I had it working with the DISABLED hybrid graphics BIOS option))
Do you make any progress on your issue, or would you like to compare notes...?

Oracle VM VirtualBox need~ VT-x /Intel Virtulization Technology missing in BIOS?

My laptop is lenovo S440,which is running Intel® Core™ i5-4200U Processor.
I checked that Intel official website,the processor support Intel® Virtualization Technology (VT-x).
However,by the time I running Oracle VM VirtualBOX,it prompt that
"VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it."
I try to enable it at BIOS ~Config>CPU,however I can't see option of Intel® Virtualization Technology (VT-x). to be select,so I have no way to enable/disable it.
Am I go to the correct path to do the configuration at BIOS?

Hello and welcome,
Have you also looked under BIOS->Security->Virtualization?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can't enable Intel VT support in MS 7383

Dear MSI community.
I have a small question about enabling INTEL VT on my mainboard:
I have Core2Quad q8200 processor and I would like to use Intel VT on MS 7383 V1.
But i can't find how to enable it on my BIOS. My Bios version is 1.3.
Is that possible? ... could not find any named feature in the BIOS for that.
Thanks and regards

Your cpu does not support Intel Virtualization Technology therefor you can't enable it: http://ark.intel.com/products/36547/Intel-Core2-Quad-Processor-Q8200-4M-Cache-2_33-GHz-1333-MHz-FSB

Only black screen on the external monitor with intel-virtual-output

Hello,
I tried to install bumblebee on my Lenovo W520 with this tutorial:
http://www.unixreich.com/blog/2013/linu … ly-solved/
I can activate my external monitor with "intel-virtual-output" and the monitor is switching on. But I can only see a black screen.
In the settings of gnome I can see my external monitor and configure it - but it shows nothing.
Have you any ideas?
Thanks a lot!

Hi,
Same problem here on my Lenovo W530.
Intel-virtual-output used to work fine but since it got upgraded the virtual output stays black.
I tried downgrading the xf86-video-intel package but there is a dependency conflict.
Available packages:
1) xf86-video-intel-2.99.916-3-x86_64.pkg.tar.xz (local)
2) xf86-video-intel-2.99.916-3-x86_64.pkg.tar.xz (remote)
3) xf86-video-intel-2.99.916-2-x86_64.pkg.tar.xz (local)
4) xf86-video-intel-2.99.916-2-x86_64.pkg.tar.xz (remote)
5) xf86-video-intel-2.99.916-1-x86_64.pkg.tar.xz (remote)
6) xf86-video-intel-2.99.914-4-x86_64.pkg.tar.xz (local)
7) xf86-video-intel-2.99.914-4-x86_64.pkg.tar.xz (remote)
8) xf86-video-intel-2.99.914-3-x86_64.pkg.tar.xz (remote)
9) xf86-video-intel-2.99.914-2-x86_64.pkg.tar.xz (remote)
10) xf86-video-intel-2.99.914-1-x86_64.pkg.tar.xz (remote)
11) xf86-video-intel-2.99.912-2-x86_64.pkg.tar.xz (local)
12) xf86-video-intel-2.99.912-2-x86_64.pkg.tar.xz (remote)
13) xf86-video-intel-2.99.912-1-x86_64.pkg.tar.xz (local)
14) xf86-video-intel-2.99.912-1-x86_64.pkg.tar.xz (remote)
15) xf86-video-intel-2.99.911-2-x86_64.pkg.tar.xz (local)
16) xf86-video-intel-2.99.911-2-x86_64.pkg.tar.xz (remote)
17) xf86-video-intel-2.99.911-1-x86_64.pkg.tar.xz (local)
18) xf86-video-intel-2.99.911-1-x86_64.pkg.tar.xz (remote)
19) xf86-video-intel-2.99.910-1-x86_64.pkg.tar.xz (local)
20) xf86-video-intel-2.99.910-1-x86_64.pkg.tar.xz (remote)
21) xf86-video-intel-2.99.909-2-x86_64.pkg.tar.xz (local)
22) xf86-video-intel-2.99.909-2-x86_64.pkg.tar.xz (remote)
23) xf86-video-intel-2.99.909-1-x86_64.pkg.tar.xz (remote)
24) xf86-video-intel-2.99.908-1-x86_64.pkg.tar.xz (remote)
25) xf86-video-intel-2.99.907-2-x86_64.pkg.tar.xz (local)
26) xf86-video-intel-2.99.907-2-x86_64.pkg.tar.xz (remote)
27) xf86-video-intel-2.99.907-1-x86_64.pkg.tar.xz (local)
28) xf86-video-intel-2.99.907-1-x86_64.pkg.tar.xz (remote)
29) xf86-video-intel-2.21.15-1-x86_64.pkg.tar.xz (local)
30) xf86-video-intel-2.21.15-1-x86_64.pkg.tar.xz (remote)
31) xf86-video-intel-2.21.14-2-x86_64.pkg.tar.xz (remote)
select a package by number: 16
loading packages...
warning: downgrading package xf86-video-intel (2.99.916-3 => 2.99.911-2)
resolving dependencies...
warning: cannot resolve "glamor-egl", a dependency of "xf86-video-intel"
:: The following package cannot be upgraded due to unresolvable dependencies:
xf86-video-intel
:: Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: xf86-video-intel: requires glamor-egl
Any Ideas what glamor-egl is?
Thanks!

Intel Virtualization Technology in the MacBook?

I know several people have posted here that they have had success running Parallel's virtualization software. I was wondering if this implies that the MacBook contains the Intel Virtualization Technology (VT) chipset that purported to be in the iMac and MacBook Pro?
Article about MBP's chipset:
http://www.macnn.com/articles/06/04/06/parallels.workstation.21/
Wikipedia about Virtualization Technology (VT):
http://en.wikipedia.org/wiki/Virtualization_Technology
iMac G5 2.0 GHz, 20 Mac OS X (10.4)

Yes, the MacBook can utilize the same technologies that are built into its Core Duo processor just like the iMac and MacBook Pro's Core Duo processor.

How to enable Intel VT-x in Windows 8 ?

In VMware, I am getting error message about enabling Intel VT-x setting in bios ? I have no idea how to go to BIOS in windows 8 and how to enable it ?
Could you please guide me how to enable VT-x in windows 8 ?

Hi,
As enabling Intel VT-x is related to hardware, please contact the computer or motherboard’s manufacture for help.
Thanks.
Nicholas Li
TechNet Community Support

How do I enable Java Virtual Machine (JVM)? I upgraded yesterday and somehow it became disabled.

I upgraded to newest version yesterday and when I went to a government site today, it tells me I have no access until I enable Java Virtual Machine (JVM). How do I do this??? (I did access this site by using Internet Explorer - but I much prefer Firefox)

If you updated from a Firefox version prior to Firefox 3.6, the version of Java that you have installed is not being recognized. Firefox 3.6 and later requires Java 1.6.0.10 or higher; you have Java 1.6.0.05
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:05~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(~~red:Firefox 3.6 and above requires Java 1.6.0.10 or higher~~; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html

Enable Intel Virtual Technology - G450

Similar Messages

Maybe you are looking for