Encounter error message 61062 when create PR via ME51

Dear Consultant,
I encountered error message 61062 - "dd.01.2011 date comes after end of valid factory calendar. (Pls correct)" when create PR via transaction ME51. Although I have changed the Delivery date to "31.12.2010", system still issue error message. FYI, material that I used to create PR has planned delivery time = 185 days (pre-configured by our purchaser via Purchasing info.record) which is equivalent to dd.01.2011. Our factory calendar is configured valid up to Year 2010 and the new year (2011) will only be configured at end of December.
If using transaction ME51N to create PR for the mentioned material above (with delivery date entered as 31.12.2010), there is no error message being issued by the system. May I know is there any solution to transaction ME51?
Pls advise asap.
Thanks & regards,
LOI

>
LOI wrote:
> May I know if there Is any effect for other modules like PP/PM on changing plant calender to 2011?
yes, a positive effect, you will not receive error messages because of missing calender anymore.
I have my calendars maintained until 2015
ME51N only takes an info record into account when you do source determination, without source determination, the planned delivery time from material master is taken.

Similar Messages

Error message appear when creating new bookmarks

When creating new bookmarks a pop-up window appear with the following info:
unload: [Exception..."Component retyrned failure code:0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult:"0x80004005 (NS_ERROR_FAILURE)" location: "JS frame:: chrome://trustchecker/content/trustchecker.js:: anonymous:: line 955" data:no]
The bookmark is saved at the bottom of the list but it is not possible to select folder to store bookmark. How do I fix this problem?

I believe Trust Checker is part of Zone Alarm, to test this try disabling the Zone Alarm add-ons in Firefox to see if you can then create new bookmarks.
To disable extensions:
Click the Tools menu and then select Add-ons . The Add-ons window appears.
# In the Add-ons window, click the Extensions panel. The list of installed extensions appears.
# Click the name of an extension in the list to select it.
# Click Disable to disable the selected extension.
# Click Restart Firefox .
If it does turn out to be the Zone Alarm extension causing the problem, check for any updates to Zone Alarm, if none you could report the issue to them.

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

"The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks!

The following error message came when I tried to open Firefox and install Firefox Home. "can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

The following error message came when I tried to open Firefox and install Firefox Home.
"can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"

This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

The following error message appears when I try to create a PDF in Publisher:

The following error message appears when I try to create a PDF in Publisher:
PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
I have tried update patches to no avail.
Can anyone please help?
Thank you.
Susan

Hello Michael,
My version of Publisher is 2010 and my OS is Windows 8.1.
64-bit OS x64 based processor.
I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
Thank you for taking the time to view my request.
Kind regards,
Susan

I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

cancel the akamai download and download files 1 of 2 and 2 of 2 directly. put both in the same directory and double click the exe to start installation.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error message: " Couldn't create Java Virtual Machine"

Hi,
I recently downloaded from IBM rational application developer for websphere software v 7.5. The installation was successful. But when I try to open it, the error message:"could not create the Java virtual Machine".
I am working on Windows Xp pro. and java is automatically updated the current version jre 1.6/
even I tried to run eclipse from the directory c:/programfiles/IBM/SDP still same problem.
Please some one help me how to fix it.
Thanks.

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Error message 9006 when trying to update os

getting error message 9006 when attemption to update os on ipad 2

To the original poster and Jennifer:
Although this step is not in the Apple document, I am pretty sure I found an easier way to fix 1601, 1602 and 1604 errors at my iPhone blog -- and that is to simply switch USB ports and try again -- also make sure you are not plugging in the iPhone via a hub and that it has full USB power.
I have no idea why the change of ports seems to work, but 49 out of 50 people who have tried it report success, so you've got nothing to lose.
Scott

All CX traffic dropped on data plane with error message 'Unable to create policy params (policy-params-failed)

Problems with CX dropping all traffic - error message: Unable to create policy params (policy-params-failed) seen when issuing cli cmd show opdata framedrop on CX.
Data hits ASA Service Policy and is redirected to CX, but no traffic is passed (user experience is timeout in browser).
Problem started after SW upgrade - present running versions:
ASA version: 9.1.5(21)
CX version: 9.3.3.1 (13)
Have tried to disable all policies and create a 'permit any any' policy, which at present is the only activve policy - still same problem.
Any suggestions?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

"Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

“Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
The error behaviour is quite irregular and does not occur for specific condition.
Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
(http://support.microsoft.com/kb/2152148)
The current version of SQL Server I am using is as below:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for the help!

Hi Mon,
The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Get error message could not create library/application support

get error message "could not create library/application support" when trying to install Creative Cloud.

Check your user permissions on the Library folder.
Mylenium

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???

Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

Encounter error message 61062 when create PR via ME51

Similar Messages

Maybe you are looking for