'End Terminate' event does not completely terminate the process instance!

Hi,
my process make use of the 'End Terminate' event, this will be used pending on the outcome of a prior task, using the 'Exclusive' gateway. This works quite well but in case of process termination some strange behavior happens.
The Enterprise Manager tell me that the process instance is in state 'Terminated' but the BPM Workspace in the 'Process Tracking' tab this instance is still in state 'Running' and if I check the WFTASK database table the process instance is still in state 'OPEN' and not 'CANCELED'.
So my question is, do I use the 'End Terminate' event the wrong way or is this a bug/feature?
Thanks in advance,
Daniel
PS: I use BPM Suite 11.1.1.5 with Feature Pack.

If we see a human task active even after termination end event is not considered a bug... I'm sorry, but i think that if every task active in the process instance is not terminated or "killed", the terminate end event is not working well. So we are talking about a bug.
If I'm wrong, what is the expected behavior of teminate end event?
Thanks in advance.

Similar Messages

When I try to migrate from imac to macbook pro my user account says this user needs attention before migrating. My e-mail does not migrate in the process. this never happened before i updated to Maverick

When I try to migrate from imac to macbook pro my user account says "this user needs attention before migrating". My e-mail does not migrate in the process. This never happened before I updated to Maverick. I have repaired user permissions but this not make any difference

Just a Follow-up - the migration went fine. The migration did not import Little Snitch, Flip4Mac and DivX, stating they were incompatible. It also reported that Intego Back up Assistant has improper security setting (which I have not yet investigated).
I am encountering small problems. Safari would not open embedded pdf documents and instead showed a black screen. This was fixed with instructions found at http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html and it now works fine.
Importing 17 years of old mail from Eudora to Apple Mail was time consuming. mostly because of the pre-migration preening i did, but using Eudora file cleaner before the migrtaion helped a lot.
I amy find some more glitches, but so far everything seems to be working.

DestroyJavaVM does not completely shut the VM

Hi All,
I'm using JDK 1.4.2. The platforms used are WindowsXP and MacOSX. In my Native Application after setting up the JVM using JNI_CreateJavaVM, i use the same to load some jar files using URLClassLoader. After all is done i need to shut the VM and then move these jar files to some location. I use DestroyJavaVM, but it does not seem to completely do its task. Some of the threads started by JNI_CreateJavaVM are still up and owing to this the jar files are held up by VM. Is anyone having any idea whether DestroyJavaVM is still faulty or do i need to do something else.
Regards

Sorry but DestroyJavaVM isn't guaranteed in the current Java SE implementation to completely terminate everything. For example you can't currently destroy the VM and create a new one in the same process.
I would recommend you try to forcibly close the jar files you've opened before terminating the JVM. For example, you might drop all references to instances of classes defined by that URLClassLoader and perform a couple of full GCs to see if the URLClassLoader is collected and its jar files closed. Or you might subclass URLClassLoader and add a method to close down all of the jar files it has open.

Mozilla Thunderbird Portable installed on Surface 3 Pro worked a few times but now does not open while the process overheats the system. why?

years of data in the installation (4GB);
Surface 3 Pro with i7 8GB RAM and 256GB SSD
the process is visible in Task Manager and absorbs around 35% of CPU time but no window is opened.
It looks like a bug but without the interface window it's impossible to do any update.

If you can manage to launch TB, it may be a matter of disabling graphics hardware acceleration.
https://support.mozilla.org/en-US/questions/1039540

When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?

See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

Accordion load event does not fire when accordion and load event created dynamically using actionsript

I cannot get the accordion load event to fire when I have
created the accordion and load event using actionscript . Here is
some sample code:
createClassObject(mx.containers.Accordion, "acc",
getNextHighestDepth());
acc.createSegment(mx.containers.ScrollPane, "sc1", "Number
One");
acc.createSegment(mx.containers.ScrollPane, "sc2", "Number
Two");
var accLis=new Object();
accLis.load=function(evtObj) {
trace("load");
accLis.change=function(evtObj) {
trace("change");
acc.addEventListener("load", accLis);
acc.addEventListener("change", accLis);
I made sure to add the ScrollPane and Accordion components
to my library. So the load event does not fire, but the change
event does fire. And through further testing the other events do
not fire, including the draw event. Can anyone help? The only time
I can get the load event to fire on an accordion is if I put an
accordion on stage, select it and add the actionscript to the
objects actions like shown below:
on(load) {
trace("load");
on(draw) {
trace("draw");
Can somebody help? Unfortunately I must create all my
components dynamically. Thank you in advance.

I'm having this issue also...but only apparently with Internet Explorer and only on some machines...ideas?

Get the Process Instance as a process variable

Hi,
is there a way on a Workflow Process to get the process instance in order to save it as a process variable (and then store it via a backend call).
In other words: I have many processes designed via NWDS Process Composer and I'd like to get the process instance ID in order to save it for faster retrieval of the process in the NWA's Manage Process application.
Thank you,
Pietro.

Does it work if the process instance is already created?
Can you give me an example?
I've put as the first step of every workflow a callback method that is executed that calls an RFC to confirm, backend-side, that the process has been created.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

I am synching my ipad and iphone with icloud. Events put in calendar go to the iphone, but if i enter an event on the iphone, it does not go to the ipad. What do i do to get this to work both ways?

I am synching my ipad and iphone with icloud. Events put in calendar on ipad go to the iphone calendar,, but if i enter an event on the iphone calendar, it does not go to the ipad. What do i do to get this to work both ways?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

HT2513 I have a mac and an ipad. when i create and ical event on my mac and then sync to my ipad, the event replicates; however, when i create an ical event on my ipad and then sync, the ical event does not sync.

Question: I have a mac and an ipad. when i create an ical event on my mac and then sync, the event transfers to my ipad. HOWEVER: when i create an ical event on my ipad and then sync, the event does not transfer. what am i doing wrong???
cadybill

Greetings,
Go to Apple > Software Update and install all available updates until no more are offered.
On iPad go to Settings > General > Software Update and install any updates.
Follow this article for issues with calendars: http://support.apple.com/kb/TS2481
Hope that helps.

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

'End Terminate' event does not completely terminate the process instance!

Similar Messages

Maybe you are looking for