Endeca partial update problem

I'm getting an exception when performing a partial update. I'm using Endeca 6.1.1. The logging says: 'Utility 'wget_-http-127-0-0-1-9005-admin-op-update-' failed.'. I have verified that wget.exe is present. The exact logging is added below.
I appreciate any help.
Marco
[10.21.13 11:47:04] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[10.21.13 11:47:06] INFO: Definition has not changed.
[10.21.13 11:47:06] INFO: Starting partial update script.
[10.21.13 11:47:06] INFO: Acquired lock 'update_lock'.
[10.21.13 11:47:06] INFO: [ITLHost] Starting backup utility 'backup_log_dir_for_component_PartialForge'.
[10.21.13 11:47:08] INFO: [ITLHost] Starting shell utility 'cleanDir_processing'.
[10.21.13 11:47:09] INFO: [ITLHost] Starting shell utility 'cleanDir_forge-output'.
[10.21.13 11:47:11] INFO: [ITLHost] Starting shell utility 'move_incoming-Updates-635176131878089292-xml_to_processing'.
[10.21.13 11:47:12] INFO: [ITLHost] Starting copy utility 'fetch_config_to_input_for_forge_PartialForge'.
[10.21.13 11:47:13] INFO: [ITLHost] Starting component 'PartialForge'.
[10.21.13 11:47:23] INFO: [ITLHost] Starting shell utility 'move_forge-output-Test5-sgmt0-records-xml_to_forge-output-Test5-sgmt0-records-xml-2013-10-21-11-47-22'.
[10.21.13 11:47:24] INFO: [ITLHost] Starting copy utility 'fetch_partials_to_cumulative_partials_dir'.
[10.21.13 11:47:24] INFO: [MDEXHost] Starting shell utility 'cleanDir_local-cumulative-partials'.
[10.21.13 11:47:25] INFO: [MDEXHost] Starting copy utility 'copy_partial_update_to_host_MDEXHost_Dgraph1'.
[10.21.13 11:47:26] INFO: Applying partial updates to dgraphs in update group 'Group0'.
[10.21.13 11:47:26] INFO: [MDEXHost] Starting copy utility 'copy_cumulative_partials_to_dgraph_Dgraph1'.
[10.21.13 11:47:26] INFO: [MDEXHost] Starting shell utility 'wget_-http-127-0-0-1-9005-admin-op-update-'.
[10.21.13 11:47:27] SEVERE: Utility 'wget_-http-127-0-0-1-9005-admin-op-update-' failed.
Occurred while executing line 30 of valid BeanShell script:
27|        // distribute partial update, update Dgraphs
28|        DgraphCluster.cleanLocalPartialsDirs();
29|        DgraphCluster.copyPartialUpdateToDgraphServers();
30|        DgraphCluster.applyPartialUpdates();
31|
32|        // archive partials
33|        PartialForge.archiveCumulativePartials();
[10.21.13 11:47:27] SEVERE: Caught an exception while invoking method 'run' on object 'PartialUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility runInParallel - Utility 'wget_-http-127-0-0-1-9005-admin-op-update-' failed.
[10.21.13 11:47:27] INFO: Released lock 'update_lock'.

Property accessor is the answer

Similar Messages

Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
HP Officejet Pro 6830
HP Officejet 6800
HP Officejet Pro 6230
HP Officejet 6220
HP Officejet Pro 8610 e-All-in-One Printer series
HP Officejet Pro 8620 e-All-in-One Printer series
HP Officejet Pro 8630 e-All-in-One Printer series
HP Officejet Pro 8640 e-All-in-One
HP Officejet Pro 8650 e-All-in-One
HP Officejet Pro 8660 e-All-in-One
HP Officejet 7610 Wide Format ePrinter
HP Officejet Pro 3610 Black and White e-All-in-One
HP Officejet Pro 3620 Black and White e-All-in-One
HP Officejet Pro 251dw Printer series
HP Officejet Pro 276dw MFP series
HP Officejet 7110 Wide format ePrinter
HP Officejet Pro 501dw Printer
HP Officejet Pro 401dw Printer
HP Officejet Pro X451dw Printer
HP Officejet Pro X576dw MFP
HP Officejet Pro X476dn MFP
HP Officejet Pro 451dn/551dn MFP
HP Officejet Pro 451dw/551dw MFP
HP Officejet 4630 e-All-in-One
HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
HP Deskjet 2540 All-in-One Printer
HP Deskjet Ink Advantage 2540 All-in-One Printer
HP ENVY 5530 e-All-in-One Printer
HP Deskjet Ink Advantage 4510 e-All-in-One Printer
HP ENVY 4500 e-All-in-One Printer
HP Deskjet Ink Advantage 3540 e-All-in-One Printer
HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
The details of this fix and a manual method of installing it can be found here.
http://support.microsoft.com/kb/3000461
This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
There are many threads in HPs forums about this issue (below are links to a few of them)
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
JonW
I work for HP

@tenkeypro
First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
Universal Print Driver (no scan)
Driver support included in Windows 8 / Windows 8.1 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Partial Update not running

Hi All,
I am trying to build a partial update pipeline for the first time. I tried to follow the steps given in Partial updates guide. But when i tried to run the partial update script, initially it was throwing an exception "SEVERE: Partial updates not implemented.
Occurred while executing line 3 of valid BeanShell script". But I modified the "DataIngest" file in C:\Endeca\Apps\Discover\config\script by commenting the exception part.
Now my partial update script is running but it gives me a following warning message and nothing gets updated or added in my jspref page.
C:\Endeca\Apps\Discover\control>partial_update.bat
[04.15.14 17:31:45] INFO: Checking definition from AppConfig.xml against existin
g EAC provisioning.
[04.15.14 17:31:45] INFO: Definition has not changed.
[04.15.14 17:31:45] INFO: Starting partial update script.
[04.15.14 17:31:45] INFO: Acquired lock 'update_lock'.
[04.15.14 17:31:45] WARNING: Partial update data extract flag 'partial_extract::
adds.txt.gz' exists with no associated file in incoming directory 'C:\Endeca\App
s\Discover\config\script\..\..\.\data\partials\incoming'.
[04.15.14 17:31:45] WARNING: Partial update data extract flag 'partial_extract::
deletes.txt.gz' exists with no associated file in incoming directory 'C:\Endeca\
Apps\Discover\config\script\..\..\.\data\partials\incoming'.
[04.15.14 17:31:45] WARNING: Partial update data extract flag 'partial_extract::
updates.txt.gz' exists with no associated file in incoming directory 'C:\Endeca\
Apps\Discover\config\script\..\..\.\data\partials\incoming'.
[04.15.14 17:31:45] WARNING: No partial update data ready for processing.
[04.15.14 17:31:45] INFO: Released lock 'update_lock'.
[04.15.14 17:31:45] INFO: Partial update script finished.
Please help
Thanks in Advance.
Savi

You need to set partial update locks on exactly the input files that you reference in your partial_pipeline.epx diagram - at least one and all of the required ones (if you have several and some are optional)
Out of the box, the load_partial_test_data script sets flags for adds.txt.gz, updates.txt.gz, and deletes.txt.gz. Edit the load_partial_test_data script to see how it is setting this flag. Then swap out the files it references to the ones your partial pipeline references. For example, change to
"${WORKING_DIR}/set_partial_data_ready_flag.sh" my-test-file.txt
After you do that, running the partial_update script should work just fine.

Partial Update - Unknown Dimension Value ID

Hello Old Endeca Friends,
I am getting a lot of these sorts of errors when I perform a partial update:
ERROR 04/25/13 16:56:21.115 UTC (1366908981115) DGRAPH {dgraph,update} Record change references unknown dimension value id 4294484500 [recspec=`UPI:100224148']
I am using MDEX 6.4 and PS 6.1.3. The dimension value ids in question seem to be in the autogen_dimensions.xml, but the dgraph doesn't seem to recognize to know about them. Why?
Any further insight would be appreciated. "Just run a baseline" is not a good answer, I need to do partials every hour throughout the day.

Thanks for the input, everyone.
It looks like my issue was that my state file had a set of updated dimensions but my dgraph did not.
I had a baseline extract with properties X, Y and Z (let's say) and I was adding in new dimensions A and B. I moved my state files from my test environment to my production environment with entries on dimensions A and B. I started getting partial data for dimensions A and B and processing it. However, my dgraph knew nothing about A and B. So, although forge created the dim vals fine and the state files were modified appropriately, my dim val updates and adds on my dgraph failed because my dgraph had never processed a baseline extract with dimensions A and B.
Once I ran a baseline with dimensions A and B, partial updates went fine and have now processed dozens without issue.
Unfortunately, I only get baseline data once a week, so it took me a bit of time to realize what was going on.

Keep getting error:Cannot connect to update server.Partial update...

I am using FF 6.0.1
I keep seeing a window pop up that says something like:
connect to update server
partial update failed
Have no idea what is going on, this has been popping up for quite awhile. When I chose the RETRY button, it sits there and the long bar that shows the progress never fills in..
Thank u for any help
Carla

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup
If files already have been downloaded then remove the files in the updates and updates\0 folder. 
You can delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
* http://kb.mozillazine.org/Installation_directory

Recent Software Update Problem ...

I just finished updating the software for my iBook G4. When the Updater was finished, I couldn't restart! I tried chosing Restart several times, and also Shut Down, but neither function would work.
So, I connect my new external HD, but it didn't show up on the desktop. So I had to press the Power button to shut down, then again to restart.
I don't recall ever seeing this happen before. Is this a bug in the most recent Tiger update?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions. (Well, the Installer actually uses superuser Permissions to do it's work, but after reboot it doesn't guarantee communication with other existing needed files Permissions.)
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Failed Partial update

Hi,
I am trying to run partial update using command prompt. But I am getting an exception and if i look into "Forge" logs, below is the error message:
FATAL
FORGE{config}: Could not open "C:\Endeca\Apps\APProductFinder\data\partials\processing\price_update_records.xml": No such file or directory
ERROR
FORGE{config}: Forge failed with 1 error and 0 warnings.
My file name is same in the partial pipeline.epx, ..testdata/partial and also partial_data_ready_flag of load_partial_test_data files. unable to figure out what is the reason for this error. It was working fine till yesterday and all of a sudden started throwing exception today.
Any help would be appreciated.
Thanks,
Savitha

But it did not work for me. I tried running baseline update many times. Even after that partial update ended with the same error message.
Then I changed the name of the file in all the places. It worked then. But still unable to find out what is the reason for this error and where does endeca hold the old file names even though it does not exist any more.
Thanks,
Savitha

Record Store Merger with partial Update

Hi,
I have a requirement in which I have to merge a feed into the endeca via partial update. The feed will only have 3 properties- part number , vendor name , Store id(value to be merged). The combination of part number and vendor name is not unique.
The only to achieve the sdesired result is by merging the feed's store detail in the data base. And by incremental indexing pushing the data into endeca. Somebody told me that CAS will then provide me the difference data and with that difference data I can partially update the records.
But my client doesn't want to use Simple indexing. She is asking to figure out merging data in CAS itself. I know that we can use Record Store Merger to merge two or more data source.
But if I use record Store merger will it provide me same differencial data input as provided by CAS in the case of indexing??
Also I am using Endeca version 6.4.0.

apparently these is a known bug in Endeca which occurs when an update results in a product not falling in 1 of the dimensionvalues. So if the price changes from 100 to 1mln and the price range only goes to 1000, endeca does not update correctly

Firefox has been unable to update partial updates ifself

Firefox has been unable to update itself. A window comes up saying"The partial update could not be applied. Firefox will try again by downloading a complete update". It has gone through several cycles of this.
I already try https://support.mozilla.org/en-US/kb/update-failed-error-message-when-updating and it doens't work. And aslo i'm an admin in my PC. Please help.

This is not a problem I personally have had however I have found a relevant thread: [/questions/705859] maybe reading that will help.
* see also [[Software Update Failed]]

Is partial update possible?

Hi,
is it possible to have Toplink perform partial update of an object, instead of all the attributes. What I need is exactly the same feature as Toplink's support for partial reading where you can specify which fields to retrieve from database.
It's necessary to disable the update of some fields in some circumstances even if the field's value is different from what is in database row. it sounds meaningless but needed.
regards & thanks.

I am confused by your request. TopLink's UnitOfWork provides minimal update capabilities. It will only modify those attributes that are different from when the object was read in.
Doug

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Upon updating to firefox 6, I get the error message "cannot update because 'libsmime3.dylib' is in use" Now firefox cannot start because it is partially updated and non-functional.

Firefox fails to open, now that it has been partially updated. Initially, it asked to replace the old firefox, which then proceeded to the next step when this appears: "cannot update because 'libsmime3.dylib' is in use". I have quit all applications and restarted, trying to run the install again as the first thing when the computer comes up. Mac version is OS X 10.5.8.

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Profile in use
* http://kb.mozillazine.org/Profile_in_use
The program must close to allow a previous installation attempt to complete
* https://support.mozilla.com/en-US/kb/The%20program%20must%20close%20to%20allow%20a%20previous%20installation%20attempt%20to%20complete
Check and tell if its working.

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

Endeca partial update problem

Similar Messages

Maybe you are looking for