Enhanced SAP class with new methods - Not showing these from standard task
Dear Gurus,
I have enhanced SAP standard class with new methods. After I have activated my new methods and would like to create a workflow task using these new methods. when I create a task and input object category as "ABAP Class" and object type is SAP enhanced class. When I try to drop down for methods SAP is not showing my new methods. I do not know why. Am I missing any? Any help would be appreciated.
Note: Remember I am trying to use SAP ABAP class custom methods.
Thanks,
GSM
Hi,
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Kind regards,
Siobhan
Similar Messages
-
MS-1762 with new 770M not showing up in Device Manager
Recently I tried to install a 765M into my Medion Erazer X7817, which is an MS-1762 barebone. Since that didn't work out in the end I returned the item and bought a green 770M which was said to be compatible with MSI (1762 as well as other boards) and Alienware.
The card came today and I inserted the new card into my laptop. There was no difference in terms of startup - no resolution change, nothing. Originally, if there was no card or a dead card inside the laptop the fan would spin up to 100% a few minute after startup. But after I installed the 770M the fan is quiet and normal, HOWEVER the card isn't showing up in Device Manager. It also isn't showing up in the NVflash utility so a vBIOS flash is out of the question for now. I have reseated the GPU and I double-checked to make sure it was in correctly.
Since the card is newer than both the 670M (the card which came with the laptop when I first bought it, which has died) and the 765M (the one I bought but didn't work in the end as it was for Clevo and Alienware only) would a BIOS update make the card visible somehow? Obviously I cannot install the drivers, only the Intel HD Graphics 4000 is showing up, and that has the latest drivers.
Any suggestions? This is a MS-1762 barebone, stock BIOS:
American Megatrends Inc.
Version E1762IM7.107
Date 25/05/2012Quote from: Svet on 03-November-14, 03:47:32
nope this bios is not for your notebook
because its change .1xx ==> 7.xx , ie: Win7 ==> Win8
and because its change Medion to Retail
double cross flashing
if you flash it, it may brick your notebook
or if its not bricked it can cause a side effects like brightness wifi are not working and to such
with no option to flash back to your original one
I realized. I could have used the /x parameter in afudos to force it, but that could've made things worse.
Which bios should I use then? Does unlocking my current bios allow compatablity for 7xxM cards? -
Testing ActionScript classes with native methods?
Hi,
I have an ActionScript class that I'm writing and would like to test using FlexUnit.
The only issue is that the ActionScript class has a member in it that is a class with native methods.
So, I get the following error when trying to run a test of that ActionScript class:
VerifyError: Error #1079: Native methods are not allowed in loaded code.
Does anyone know of a way to get around this? FlexUnit seems not to like native methods being present.
Thanks,
MattHi casdvm,
by definition, you only own objects that you created using one of the alloc* methods, copy: or new:. All other objects (IIRC with a few noted exceptions) are autoreleased.
If you create convenience methods in your own class, you should follow the same rule. For example, if you have a class Pet and want to implement the method +petWithName, your code might look something like that:
+ petWithName: (NSString *)name
return [[[Pet alloc] initWithName: name] autorelease];
Alex -
In which case we need a class with all methods defined as abstract ?
In which case we need : A class with all methods defined as abstract (or should we go for Interface always in this case)
The concept of interface and abstract class overlaps sometime, but we can have the following thumb rule to use them for our specific need:
1) Interface: This should be use for code structuring. They standardize your application by providing a specific contract within and outside. If you think abstract class also provide structure, then reconsider as it limits the structure re-usability when there are many super-classes to inherit from. Java allow multiple inheritance by interface and not by Abstract class.
2) Abstract Class: This should be use for code-reusability. Interface doesn't have any code so can't be used for code-reusability.
Actually we can use both to provide the best.Taking a refernce to J2EE framework, the "Servlet" is an interface. It laids down the contract/structure for any code to be a servlet.
But the "GenericServlet" class is an abstract class which provides implementation of some of the methods defined in the "Servlet" interface and leave some method abstract.
Thus we see that the "Servlet" interface standardise the structure and the "GenericServlet" abstract class gives code re-usability.
Original Question:
In which case we need a class with all methods defined as abstract ?To this question, as all methods are abstarct we don't have option for code-reusability. so why not add standard structure concept to your application. So if there is not any restriction on making the field variable(if any) as final, we should go with the interface concept. -
To change the string in Class Builder "New Method"
HI friends,
Im using the std program of "RFDOPR10"...(changed into my customised program as ZRFDOPR10).....
Here i want to change the strings of Id_type eq 4 availble under the class builder "New Method".
"id_ruler_string = '2.13.24.29|43|58|73|88|103|118|'" (for 24...i want to give 38.....then 45...)
Pls help me how to change the std method function for my z program...
FYR:
RFDOPR10 is the std program for tcode :"s_alr_87012178", Customer analysis.If u want to c the example report, in this tcode...give OI:1, Summ level:6, OI list:1 and Company CD:2 under Output control tab in selection screen with Company code.Now, u able to see the reports in the screen.There, after Customer number....I've to give some more spaces(length) for Sort field.
Thanks & regards
Sankar.No, but I suggest using a different editor which does allow a different text option and just pasting it in.
-
Tochange the string in Std Class Builder "New Method"
HI freinds,
Im using the std program of "RFDOPR10"...(changed into my customised program as ZRFDOPR10).....
Here i want to change the strings of Id_type eq 4 availble under the class builder "New Method".
"id_ruler_string = '2.13.24.29|43|58|73|88|103|118|'" (for 24...i want to give 38.....then 45...)
Pls help me how to change the std method function for my z program...
FYR:
RFDOPR10 is the std program for tcode :"s_alr_87012178", Customer analysis.If u want to c the example report, in this tcode...give OI:1, Summ level:6, OI list:1 and Company CD:2 under Output control tab in selection screen with Company code.Now, u able to see the reports in the screen.There, after Customer number....I've to give some more spaces(length) for Sort field.
Thanks & regards
Sankar.Associated with the text box there will be some kind of event handler. Maybe it's an action event on the text box (when the user clicks return) or maybe you have a separate button that the user clicks.
Either way, in the event handler, get the text from the text box, and then call the sendData method, passing the text as an argument. -
Revision: 13083
Revision: 13083
Author: [email protected]
Date: 2009-12-17 16:10:05 -0800 (Thu, 17 Dec 2009)
Log Message:
Updated MASTAdapter class with new trait names and events.
Modified Paths:
osmf/trunk/plugins/MASTPlugin/org/osmf/mast/adapter/MASTAdapter.as
osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/TestMASTPluginInfo.as
osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/adapter/TestMASTAdapt er.asSilviu!
I'm really sorry, but as all the office is trying to fix the problem, someone replaced the url content with the stuff that was pointing to the local machine.
I've fix it, and the video player is available here again: http://pp.player.webtv.flumotion.com/params/apiKey/5PzLR2ULL3z2rumJ/videoId/60
If there are other references to the localhost, please do not bother with them, as they do not affect player functionality.
The stream that it uses is an RTMPE, so i'm afraid it will only works with this player. Anyway, the stream url is as follows: rtmpe://87.248.205.81/a4349/e2/veo7/ondemandrtmpe/mp4/med/first-person-mario-4d8741aa.mp4
I really appreciate your help!
Thank you! -
Camera new d810 not showing pix up in raw files in elements 11
camera new d810 not showing pix up in raw files in elements 11 and lightroom 4
DNGC 8.7 can be found, here: http://www.adobe.com/downloads/updates/
You can purchase upgrades to LR and/or PSE, here:
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html -
DNG files created with LR4 do not show thumbnails
Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- DanHi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion -
What would cause images with captions to not show up?
Still struggling with this issue. Images with captions are not showing up on the iPad preview.
Please help!
Thx!Hi Andrew,
I have been struggling with this for days. I am working on it with Apple. We re-installed the software, I re-installed OSLion, I re-started in safe mode, looked at startup items, cache, etc.
Now I am about to create a partition and test again to determine if the issue is with another software program on my system.
BTW, I noticed this starting AFTER I upgraded to 1.1, but maybe that is a coincidence. Do you know if it started for you after the update? ALSO, check your help screen in IBA. Does it look the attached? This started happening at the same time as the caption/image issue.
Please stay in touch as you the first person other than myself (that I know about), who is having this issue.
I look forward to hearing if you have the Heklp issue.
THANKS!
Belinda -
My new computer does not show share from my old computer how long does this take?
I'm having the same problem. I have my main Library on a WXP machine and a new W7 laptop. My iphone 4 sees the library from the W7 machine, but neither the laptop nor the iphone see the big library on the WXP machine. I have configured firewall settings, tried the network wired and wireless, using same apple id on all devices, restarted itunes on all computers, turned sharing off and on on all computers. Nothing works.
-
Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?
Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J. -
I'm working on my homework problem which is:
Design and code a new method to be exported from ArrayStringLog (the file is given to me) called isEmpty with the following signature public boolean isEmpty()
I created a new class and named it homework2, here is the method:
public class homework2
public boolean isEmpty()
// Returns true if this StringLog is empty, otherwise returns false.
if (lastIndex == (- 1))
return true;
else
return false;
}now how can i get it exported from ArrayStringLog? that's the part that I didn't understand
Edited by: memee4eva on Sep 30, 2009 11:53 PMI think your isEmpty() method should go into the ArrayStringLog class. That way the method will be exposed by the altered ArrayStringLog class.
Am I right in thinking that an ArrayStringLog instance has a lastIndex member?
You might like to compare what you have with this:
/** Returns true iff this StringLog is empty. */
public boolean isEmpty()
return lastIndex == -1;
} -
PLD Report does not show data from Query
Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
NickHi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty -
The monitors of on location CS3 not showing image from Sony FX7
O.L records OK and plays back but at no time do
any of the monitors show an image. Was OK in Vista now gone to Windows 7
Pre Pro CS3 ok on 7 (capture and playback.) Any suggestions pleaseDear Sir, Many many thanks for your very detailed answer everything works just fine. I'm not sure wether I should reply to your answer elsewhere please advise me if this is the case.
thanks again William sign on name Breezley.
Date: Mon, 4 Jan 2010 18:44:18 -0700
From: [email protected]
To: [email protected]
Subject: the monitors of on location CS3 not showing image from Sony FX7
Breezley,
OnLocation CS3 used Direct Draw to create the video window. In Vista, you may have noticed that OnLocation CS3 would disable 'Aero' themed desktops as they did not support Direct Draw. Windows 7 does not have this functionality, so you must disable the Aero theme manually to see the video in OnLocation CS3.
To do this, right click on open desktop and choose Personalize.
This will display available Themes.
Scroll down to the 'Basic and High Contrast Themes'.
Choose any one of the basic or high contrast themes.
Restart OnLocation CS3.
This should bring your video back into view.
>
Maybe you are looking for
-
How to connect my Equium A300D to the TV?
I cant conect to TV from S-video port it says - display conected but I cant see nothing in TVI tryed the FN /F5 but nothing. With RGB is ok. HELP!
-
I can not find the messages in sxmb_moni in http to rfc scenarion
hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario can anyone help me
-
Nav/Menu bar hidden behind images
I placed my nav/menu widget in my master page. I have several layers in each page that I would like to arranged behind the nev/menu bar so I can still utilize it. Muse doesn't seem to let me push the images back behind the nav bar. Currently my photo
-
Hi, Recently i came across a tricky interview question regarding spfile . I have a database where i have done changes using my spfile and later I have bounced the database. But while starting , it is throwing an error that it cant read the spfile. I
-
Some ports randomly get blocked and the external program is unable to rece
We have configured few ports to send out Idocs using TRFC mechanism. Initially all the ports are working fine and the external program is able to receive Idocs from all the ports. However after sometime, some ports randomly get blocked and the exte