Enhancement Fields missing in the Inbound XML payload

We are using XI3.0. We need to send some Purchase Order data from R/3 to SRM(SUS), in addition to what is available in the standard content. We have created the required datatype enhnacement. we have mapped these additional fields in the message mapping to their respective sources. We have also generated and activated the ABAP proxies on the SUS side. However at runtime whenever a PO is created, none of the additional fields are available in the inbound XML payload.
Can some one help me to know what could be wrong ?
Thanking You
Regards
Vinay Rane

Hi Vinay,
You can try one of the following options:
1) Clear/reload XI cache using trx SXI_CACHE, after that try to test again and check whether you are getting the correct fields.
2) Are you using the RFC adapter? if you do; then try to restart it. This adapter also caches a lot of meta data and information during runtime.
3) Last but not least; (You probably know this better than me , but just in case...) If you had previously generated the proxy classes, and after that you did some changes in the repository then you certainly will need to regenerate those proxy classes.
Cheers,
R.

Similar Messages

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

How to retrieve the Source XML Payload into an External System using message ID?

Dear Experts,
I have a requirement to retrieve the inbound XML message payload based on Message ID into Backend ERP system for reference or re-process as needed. Request you to let me know the technique to get the source payload of successful message.
Kind Regards,
Madhu

Hi,
Check following links:
http://help.sap.com/saphelp_nw04/helpdata/en/31/6c5c3c3806af06e10000000a11402f/content.htm
http://wiki.sdn.sap.com/wiki/display/Snippets/PI+Monitoring+Functionality+-+Fetching+Data+from+SXMB_MONI+Standard+Tables+-+Part+I
https://wiki.sdn.sap.com/wiki/display/Snippets/PI+Monitoring+Functionality+-+Fetching+Data+from+SXMB_MONI+Standard+Tables+-+Part+II
-Deepak

How can I retrieve the inbound XML messages (invoices) by ABAP program?

Where are the inbound XML messages (invoices) saved in XI box?
How can I retrieve the inbound XML invoices in XI box by ABAP program?
Is there any method/BADI/function module to retrieve these XML invoices, so I can output these XML invoices in an ABAP report?
Thanks in advance for your help!

Hello Fisher,
This Webblog will help you.
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
From this blog you will understand the code behind SXMB moni .. which performs the selection from database. You can write a report as well.
Cheers,
Himadri

Some Data Missing in the inbound Idoc received from Gentran

Hi,
We are receing one custom message type with the basic type ORDER05 in SAP from Gentran. When we checked the destination file generated in Gentran, its showing data for all the segments. However in SAP when we checked the corresponding idoc we find the segment E1EDP05 is missing. The Gentran team says they are placing the destination file in the unix server of SAP. However we dont find these files in the SAP Unix server. Could anybody advise what could be the problem and where we need to check further ?

Gentran will never be able to create an IDOC within SAP. Here is what happens:
> Gentran creates a flatfile/XML which is in the IDOC format (the one which you can see in WE60).
> Gentran then places this flat file/XML in a folder on Application server. This can be UNIX, Windows NT, etc..
> Gentran then triggers the Startrfc.exe which will trigger EDI_DATA_INCOMING function module.
> This FM will parse the data, check it for consistency of the defined standards, then write the control record into EDIDC and corresponding data records into EDID4 and updates the relevant statuses (i.e. 01 - added, etc). It'll then look into the partner profile setup, look for process code and moves the status to 64 and calls the inbound FM which will post the application document.
In you case, you need to find out what file is coming in and where E1EDP05 has missed. The data will only be sent by Gentran. The inbound function modules will never update IDOC data records (unless there is a customization). The status records are updated.
If E1EDP05 is not mapped and sent by Gentran and you still used to see it, then there should have been a customization in place to add values to IDOC segment fields. Try to get the final file that is mapped from either X12/EDIFACT and then see if E1EDP05 segment is present in there. If it is present then upload the same file into AL11 using CG3Z and call EDI_DATA_INCOMING or WE19 to process it. Once processed, you'll can observe if E1EDP05 is being created or not.

Fields missing in the printouts

Hello everyone
I have a crystal report application in VB.NET 2005, which gets the values of a field from the database and supports printing of the report in the following formats
1. pdf
2. directly to a printer - printout
When i export the report using reportdocument to pdf , all the fields are getting printed : Normal - As expected
But when i print the report directly using PrintToPrinter method,i am not able to print some of the fields. i.e some of the entries are missing in that report printout
Can someone guess and guide me what could be the problem ???
Are there any limitations / preconfigurations that needs to be doen before using the PrintToPrinter method
Regards
Srivatsa

Hi Srivatsa,
Since you are facing the issue while printing the report from VB.NET 2005, the best forum to post this question would be: -
Business Objects SDK Application Development Forums.
However, can you please let us know if the fields which are missing in the print out, what is their data type and what is the printer type (prefrably the printer name and model number).
Please re-post the question on Business Objects SDK Application Development Forums with the requested information.
Regards,
Abhishek Jain.

Some fields missing from the Information interface

On iTunes 12 I can’t find the "Description" field that was in the Video page.
The field still shows in the list of songs, but it doesn’t appear on the new "Information" interface. And I don't think this is the only field missing compared to the previous Information interface. Can anyone help? Thank you.

... before you click Get Info.
tt2
YES!
Thank you turing! That really helped.
(it seems a bit of a complication to me, the system was just fine as it was, but what do I know?)

Plant missing in the inbound processing of IDOC ORDERS?

Hi gurus,
We are using IDOC ORDERS to create sales order in the inbound processing of R3 4.7 system, finally we found the sales order was created succesfully in VA03, but the plant(WERKS) and storage location(LGORT) couldn't be seen even the idoc has relevant value.
Have you met this case? Any help will be appreciated. Thanks.

Hi Himanshu,
Thans for your reply. I gave the field E1EDP01-WERKS the relevant value, but in VA03 we couldn't see the plant value when the idoc status was 53. When we debug it in WE19, we found the plant value probably wasn't assigned.
Any ideas?

Newly-added field missing in the field catalog for NR00

I am about to creat condition record for condition type NR00 free goods . I need to make some customizing to meet our requirement .So I changed the field catalog for the condition table by adding a new field BWAST (purchasing document type) . After that I am going to creat a new condition table 501 with this newly-added field ,but I can't find the field in the right part for field catalog .
Can you give me some advice ? Thank you in advance.

I 've got the answers ,
Note 21040 - Allowed Fields not appearing for condition table
thaks

Fields Missing in the data source

Hello Friends ,
I have to Append structures in my data source , and there are few fields under each append , the fields existing in Dev are missing in QA under one of Append strcuture's in QA. I see the fields when I double click the extract str but dont get to see them in the data source in QA, has anyone had this earlier ?
Need y

Hi,
Go to transaction RSA6 -> datasource. You will see number of fields ( standard and appended). Check missing field there and checkbox in HIDE column against it. If box is checked it wont be shown in the datasource. It will hide the field in the datasource.
Hope this helps.
Regards,
Viren

Field missing in the sales order.

Hi Experts,
We have notification for which the sales orders are created.
Whenever some changes are made in the notification they get reflected in teh sales order once u open it an save it again.
But this time when we made some changes on the notification and hence opened and saved the sales order along with reflecting the changes in the sales order as per the notification one crucial field got cleared.
But we are not able to trace how is this field getting cleared.
We have tried creating new sales orders and again tried the same changes but this time no field got cleared and everything is fine.
But the original sales order still have the field blank which is important.
Please advice.

Hi,
The copying controls are same as for other notifications.
We have tried creating sales orders without changing the copy controls. But this prob has not occurred with the sales orders we are creating now. But the prob that has occured in case of original sales order still persist.
Please advice.

First field missing on the top of page 2

I have a form that will occasionally create a second page as it's listing disbursements, but the first field of the second page continually comes in blank. Any ideas?

This could be a lot of things. More details would help.
Check the !FldNotAvail and !FldUsed events of your offending field. Perhaps it's not there, so the second field's !FldNotAvail is laying down the subform, at which point print agent has already given up on your first field.

Need to know how to iterate a list of field from the req xml in page servic

Hi All,
Please help me out with java code in which i am able to iterate a list of field coming in the request xml to my page service class under read(Pageheader header) method of mine queryPagemaintenace class.
package com.splwg.cm.domain.pageService;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Iterator;
import java.util.List;
import com.ibm.icu.math.BigDecimal;
import com.splwg.base.api.businessObject.BusinessObjectDispatcher;
import com.splwg.base.api.businessObject.BusinessObjectInstance;
import com.splwg.base.api.businessObject.COTSInstanceListNode;
import com.splwg.base.api.datatypes.Date;
import com.splwg.base.api.lookup.BusinessObjectActionLookup;
import com.splwg.base.api.service.DataElement;
import com.splwg.base.api.service.ItemList;
import com.splwg.base.api.service.PageHeader;
import com.splwg.shared.common.ApplicationError;
import com.splwg.shared.environ.FieldDefinition;
import com.splwg.shared.environ.ListDefinition;
import com.splwg.shared.logging.Logger;
import com.splwg.shared.logging.LoggerFactory;
* @author
@QueryPage (program = CMUSER, service = CMUSER,
* body = @DataElement (contents = { @ListField (name = USER_GROUP_LIST)
* , @ListDataField (name = USR_GRP_ID)
* , @DataField (name = MESSAGE_TEXT)
* , @DataField (name = USER_ID)
* , @DataField (name = PASSWORD)
* , @DataField (name = LAST_NAME)
* , @DataField (name = FIRST_NAME)
* , @DataField (name = USER_TYPE_FLG)
* , @DataField (name = EMAILID)}),
* actions = { "add"
* ,"read"
* , "delete"
* , "change"},
* header = { @DataField (name = USER_TYPE_FLG)
* , @DataField (name = EMAILID)
* , @DataField (name = LAST_NAME)
* , @DataField (name = FIRST_NAME)
* , @DataField (name = PASSWORD)
* , @DataField (name = USER_ID)},
* headerFields = { @DataField (name = USER_TYPE_FLG)
* , @DataField (name = USR_GRP_ID)
* , @DataField (name = EMAILID)
* , @DataField (name = LAST_NAME)
* , @DataField (name = FIRST_NAME)
* , @DataField (name = PASSWORD)
* , @DataField (name = USER_ID)},
* lists = { @List (name = USER_GROUP_LIST, size = 100, includeLCopybook = false,
* body = @DataElement (contents = { @DataField (name = USR_GRP_ID)}))},modules = {})
public class CMUSER extends CMUSER_Gen {
public static final Logger logger = LoggerFactory.getLogger(CMUSER.class);
     DataElement root = new DataElement();
     PageHeader page = new PageHeader();
     protected DataElement read(PageHeader header) throws ApplicationError{
I want to know how can i iterate this USER_GROUP_LIST in my read method and get the USR_GRP_ID field data from it.
A Prompt reply from your end will help me to resolve this issue

Guru Sir,
i tried to override the add() method of the framework in that i was able to iterate the field from the list. But now the i am facing there is that i am not able to send back the response to the external system in XML format. I am getting a blank response in my SOAP UI Tool while testing here is the code:
import java.util.ArrayList;
import java.util.Collection;
import java.util.Iterator;
import java.util.List;
import com.ibm.icu.math.BigDecimal;
import com.splwg.base.api.businessObject.BusinessObjectDispatcher;
import com.splwg.base.api.businessObject.BusinessObjectInstance;
import com.splwg.base.api.businessObject.COTSInstanceListNode;
import com.splwg.base.api.datatypes.Date;
import com.splwg.base.api.lookup.BusinessObjectActionLookup;
import com.splwg.base.api.service.DataElement;
import com.splwg.base.api.service.ItemList;
import com.splwg.base.api.service.PageHeader;
import com.splwg.shared.common.ApplicationError;
import com.splwg.shared.logging.Logger;
import com.splwg.shared.logging.LoggerFactory;
* @author
@QueryPage (program = CMUSER4, service = CMUSER4,
* body = @DataElement (contents = { @DataField (name = MESSAGE_TEXT)
* , @DataField (name = PASSWORD)
* , @DataField (name = USER_ID)
* , @DataField (name = LAST_NAME)
* , @DataField (name = FIRST_NAME)
* , @DataField (name = USER_TYPE_FLG)
* , @DataField (name = EMAILID)
* , @ListDataField (name = USR_GRP_ID)
* , @ListField (name = USER_GROUP_LIST)}),
* actions = { "add"
* , "delete"
* , "change"
* , "read"},
* header = { @DataField (name = USER_ID)
* , @DataField (name = MESSAGE_TEXT)},
* headerFields = { @DataField (name = USER_ID)
* , @DataField (name = MESSAGE_TEXT)},
* lists = { @List (name = USER_GROUP_LIST, size = 100,
* body = @DataElement (contents = { @DataField (name = USR_GRP_ID)}))}, modules = {})
public class CMUSER4 extends CMUSER4_Gen {
     public static final Logger logger = LoggerFactory.getLogger(CMUSER4.class);
     DataElement root = new DataElement();
     PageHeader page = new PageHeader();
     protected PageHeader add(DataElement item) throws ApplicationError{
          BusinessObjectInstance boInstance = BusinessObjectInstance.create("CM-USER");
          String USR_GRP_ID = null;
          try{
          logger.info("Data coming from the Service into the Application is :"+item.get(STRUCTURE.USER_ID));
          logger.info("Data coming from the Service into the Application is :"+item.get(STRUCTURE.FIRST_NAME));
          logger.info("Data coming from the Service into the Application is :"+item.get(STRUCTURE.LAST_NAME));
          logger.info("Data coming from the Service into the Application is :"+item.get(STRUCTURE.EMAILID));
          // logger.info("Data coming from the Service into the Application is :"+getInputHeader().getString(STRUCTURE.list_USER_GROUP_LIST.USR_GRP_ID));
          // Iterator it = STRUCTURE.
          ItemList sourceList = item.getList(STRUCTURE.list_USER_GROUP_LIST.name);
          List userGrpID = new ArrayList();
          logger.info("The Size of the User Group List here is :"+sourceList.size());
          Iterator iter;
          if ((sourceList != null) &&
          (sourceList.size() > 0)) {
          for (iter = sourceList.iterator(); iter.hasNext(); ) {
          DataElement myItem = (DataElement)iter.next();
          USR_GRP_ID = myItem.get(STRUCTURE.list_USER_GROUP_LIST.USR_GRP_ID);
          logger.info("The User Group Id coming in the List here is :"+USR_GRP_ID);
          logger.info("Data coming from the Service into the Application is :"+item.get(STRUCTURE.PASSWORD));
          boInstance.set("user", item.get(STRUCTURE.USER_ID));
          boInstance.set("firstName", item.get(STRUCTURE.FIRST_NAME));
          boInstance.set("lastName", item.get(STRUCTURE.LAST_NAME));
          boInstance.set("emailAddress", item.get(STRUCTURE.EMAILID));
          // COTSInstanceList userGrpList = boInstance.getList("userGroupUser");
          // COTSInstanceListNode userGroupList = userGrpList.newChild();
          COTSInstanceListNode userGroupList = boInstance.getList("userGroupUser").newChild();
          userGroupList.set("userGroup", USR_GRP_ID);
          logger.info("Data coming from the Service into the Application is :"+userGroupList.toString());
          /*boInstance.set
          boInstance.set("userGroup", getInputHeader().getString(STRUCTURE.HEADER.USR_GRP_ID));*/
          // UserTypeLookup.constants.TEMPLATE_USER
          //if(element.get(STRUCTURE.USER_TYPE_FLG))
          //boInstance.set("user", element.get(STRUCTURE.));
          boInstance.set("dashboardWidth","200");
          boInstance.set("homeNavigationOption","CI0000000574");
          boInstance.set("language","ENG");
          boInstance.set("toDoEntriesAge1", new BigDecimal(50));
          boInstance.set("toDoEntriesAge2",new BigDecimal(100));
          boInstance.set("displayProfileCode", "NORTHAM");
          String expirationDate = "2100-12-31";
          String[] array = expirationDate.split("-");
          userGroupList.set("expirationDate",new Date(Integer
                         .parseInt(array[0]), Integer
                         .parseInt(array[1]), Integer
                         .parseInt(array[2])));
          //boInstance.set("userGroupUser", userGroupList);
          COTSInstanceListNode roleUserList = boInstance.getList("roleUser").newChild();
          roleUserList.set("toDoRole","F1_DFLT");
          COTSInstanceListNode dataAccessList = boInstance.getList("dataAccessUser").newChild();
          dataAccessList.set("dataAccessRole","***");
          String expiryDate = "2100-01-01";
          String[] array1 = expiryDate.split("-");
          dataAccessList.set("expireDate",new Date(Integer
                         .parseInt(array1[0]), Integer
                         .parseInt(array1[1]), Integer
                         .parseInt(array1[2])));
          BusinessObjectDispatcher.execute(boInstance,
                         BusinessObjectActionLookup.constants.FAST_ADD);
          page.put(STRUCTURE.HEADER.MESSAGE_TEXT, "User Added Successfully");
          page.put(STRUCTURE.HEADER.USER_ID,item.get(STRUCTURE.USER_ID));
          }catch(Exception e){
               e.printStackTrace();
               page.put(STRUCTURE.HEADER.MESSAGE_TEXT, "Caught Exception in the ORMB System. Please reach out to the Admin"+e.getMessage());
               page.put(STRUCTURE.HEADER.USER_ID,item.get(STRUCTURE.USER_ID));
          return page;
If you can help me to find out what went wrong here while sending the response back it can close my issue.

Getting different namespace in inbound XML message consumed by BPEL after translated from EDI to XML in B2B using Inbound Agreement

Hello B2B Gurus,
I am able to process B2B inbound files successfully from Trading Partner --> B2B --> BPEL. When it comes to BPEL i am not able to parse/transform the received XML as i am getting selection failures in assign and empty nodes in transformation. When i look at the input XML payload which i received in ReceiveB2BConsume Payload i observed that i am getting namespace as " xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" instead of actual namespace xmlns="urn:oracle:b2b:X12/V4010/856" which is in my XSD as well and i am getting the XML start tag <?xml version="1.0" encoding="UTF-8" ?> 2 times. :
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
<Transaction-856 xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" mlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2013-08-21T16:33:57" CreatedBy="XEngine_2956" GUID="{00C28978-0AA1-11E3-88B9-80C16E7DC6DA}">
<Internal-Properties>
</Transaction-856>
I went back and checked the XSD which i loaded in the B2B Console and i am having the following namespace
"<xsd:schema xmlns="urn:oracle:b2b:X12/V4010/856" targetNamespace="urn:oracle:b2b:X12/V4010/856" xmlns:xsd="http://www.w3.org/2001/XMLSchema" version="1.0" elementFormDefault="qualified">"
I am not sure why the XML translated from EDI in B2B console has the different namespace and XML start tag 2 times. Can you please help me resolve the issue. Let me know if i am missing anything.
Thanks in Advance..

Hi,
Please set property as b2b.setDynamicNameSpace=false.
To use EDI ecs and xsd files from Oracle B2B 10g version, set this property to true.
When using EDI ecs and xsd files in Oracle B2B 11g which were used in Oracle B2B 10g, the XEngine may generate dynamic namespace for the translated xml. For example,
xmlns="NS_31CA8D0F33324F95A0BF15D85539C27E20060518215520"
To turn off dynamic namespace generation for inbound EDI messages, set this property to false.
Thanks
Satendra Pare

Xml payload related problem

Hi ALL
Currently I am doing a scenario in which i m encrypting the incoming xml payload(field by field) in java mapping and then decrypting it with in the adapter module.Now problem that i m facing is that after encryption if i get some special characters, the resulting xml payload becomes invalid and will not be parsed.

hi,
Try to put it into CDATA.
<script>
<b><![CDATA[</b>!@!#!@#!@#!@$@#$<b>]]></b>
</script>
regards,
Wojciech
Message was edited by: Wojciech Gasiorowski

Enhancement Fields missing in the Inbound XML payload

Similar Messages

Maybe you are looking for