Enhancement for Automatic Serial Number Generation

Hi,
Has anybody worked on the enhancement iqsm0001?
If so, please give me some idea on how to use this enhancement for automatic serial number generation.
Thanks for your kind help.
Regards,
Renjith Michael.

Hi Renjith,
You can check the following link, Hope it helps you to some extent:
Re: Implement unique serial number within a client
And you can also try user exit EXIT_SAPLIPW1_001 for Automatic serial number assignment.

Similar Messages

I am enhancing the automatice serial number generation,, but include pgm ?

I am enhancing the automatice serial number generation,, but include pgm is not openings i want to write logic in the include pgm but it is not opening wht can i do, I founded exist in smod and in that the include pgm is not openings plz help me thanking U

If you are talking about the include in the Exit Function module, then double click the Include, the system gives a warning sig, press Enter , a pop up is displayed saying Include does not exists.Create object ? Say yes here and do the need ful in the code generated.

Enhancement IQSM0001 Automatic serial number assignment

Hi,
I have used enhancement IQSM0001, function module EXIT_SAPLIPW1_001 for the automatic serial allocation in delivery which is working fine; but the same enhamcement is not working for return delivery.
After investigation; i found that this enhancement only works with delivery document category 'J' which is delivery and not with 'T' which i used for return delivery.
Any idea guys?
Thanks

Why in the return delivery you want to activate the user exit? Returns should carry the same serial number that is assigned already in the outbound delivery.
If the above statement is wrong, then in the user exit itself why can't the code be modified to include the return delivery document category type?
If the exits checks something else, then check OSS Note 1040756 - Type inequality in EXIT_SAPLIPW1_001
Regards,

User Exit / Enhancement for Master Serial Number Capture ....Pls help !!!

Hi,
My requirement is: When I Enter a Master Serial Number, For Ex. my master serial number is of format SXXNNNNNNNK,
*where XX is the number of Serial numbers to capture.*
*If XX = 15, i need to capture 15 serial numbers.*
*NNNNNNN is the series of the serial number beginning.*
*If NNNNNNN = 1234500, and XX = 5, the Master Serial numbers generated would be 1234500 1234501 1234502 1234503 1234504*
*(5 S/Ns should be generated).*
(S and K can be left alone).
Now When i enter the Master Serial Number SXXNNNNNNNK, and when I press enter, internally a User Exit should be triggered and generate the required number of S/Ns.
Can anyone please help me out what is the User Exit i need to use so that my requirement as mentioned above is fulfilled?
*Thanks in advance,*
*saikumar*

Hi,
You can use the user exit include - MV45AFZZ and the subroutine FORM USEREXIT_NUMBER_RANGE.
Hope it helps.
Reward if it is useful.
Thanks,
Srinivas

Restrict Automatic serial number calculation for Production order release

Hi,
I need the solution for following requirement.
Release production order(CO02) . Then go to Menu header-> Serial Numbers.
Here I am getting serial numbers automatically as the material used in production order is set for automatic serial number calculation.
But I want to restrict automatic serial number assignment based on production order type.
If order type is 'XYZ', I dont want to calculate serial numbers automatically.
Can anyone tell me how to do it?
Regards,
Manan Desai.

When you press Release Order button the BADI 'WORKORDER_UPDATE->AT_RELEASE' will be called.
At this point the internal tables for Serial numbers are filled by the program automatically.
So call function module 'SERIAL_INTTAB_REFRESH' which will refresh the internal tables for serial numbers generated before teh serial number window pops up.
Also at the BADI 'WORKORDER_UPDATE->AT_SAVE' call the same function module because before this BADI call when you press 'SAVE' the program again checks if automatic serial number is set for that material and if yes then check if no serial numbers are generated then it generates the serial numbers again and fills the internal tables. So clear the internal tables again based on the conditions.
In these BADI's we have access of header information which can be used to check condition.
I hope this will give you better idea.
Thanks for your efforts.
Manan Desai.

Enhancement for Automatic GI for MIGO transaction

Hey Folks ,
My requirement is as :
I wanted to do automatic GI of the goods once their GR is done and dat data should also be updated to sap tables .Now a days we are using MIGO transaction for GI and GR both ,I have found a BADI for MIGO also but i am unable how to procede since GR and GI are in single trancation code .
We are also not using PP module so backflushing wont work here .
Automatic GI should trigger after saving the GR entries .
Regards
Edited by: swapnil kamble on Jan 13, 2010 5:53 PM
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 13, 2010 12:04 PM

Hi Renjith,
You can check the following link, Hope it helps you to some extent:
Re: Implement unique serial number within a client
And you can also try user exit EXIT_SAPLIPW1_001 for Automatic serial number assignment.

Problem on forms for serial number generation with last record next_record.

Hi Experts,
currently i'm facing one problem like :
i'm populating one receipt detail in Multi block , like when user key in one receipt number that time record should go in first record ,and if they key in second receipt number then record should go in second record . mean to say every time record go in last record ..but the problem is i want to generate Serial no correspondence to every last record ..
here is my approch :
cursor c1 is
select * from table
where cname =:blk_name.clm_name.
Last record;
next_record;
for v1 in c1 loop
processed record;
next_record;
end loop;
last_record;
go_block(___);
first_record;
:sno := system.cursor_record ;
next_reocrd;
end loop;
first_record;
And in block level i'm writing code for Serial number generation when user key in manual entry for receipt detail:
:blk_name.coulumn_name := :system. cursor_record;
so in this approach their is no problem it is working properly but the problem is that
when user fetch one receipt automatically and then after he want to enter next record manually and he decided to go in detail block ,
and once he reached in detail block that time block level trigger i firing .ans serial number 2 generated and then suddenly he came to know no i want to fetch next record automatically mean to say now user going again master block and fetching next receipt detail ,
but the problem is when user leaving seccond sr no and going in master block and population next receipt detail that time cursor going on 3 record
but logically have to replace the second Serial no and generate the again serial number 2 record population .mean to say its not refreshing last_record..
so i'm appreciating is anyone if came accoross this type of issue please corrrect my code and send updated code ..plsssssssssssssssssssssssssssssss
Thanks
Abhishek
[email protected]

hi
I put this below code on when_new_record_instance on block level..
:blk_name.column_name :=system.cursor_record;
so can you please help me.....
Thanks
Abhishek

How to create automatic serial number for ticket in illustrator?

How to create automatic serial number for ticket in illustrator?

Check this out
http://forums.adobe.com/message/1271310#1271310

Deactivate Serial Number Generation in MIGO

Hi,
In MIGO,Serail number generation is made mandatory through Create serial no.s automatically checkbox in serial number tab.The process is such that the user will Check and then Post.So while pressing the Check button,internally serail numbers are generated and while posting the serial numbers are generated skipping the generated numbers in Check.ex.while checking 001 and 002 are internally generated and aftr Post if we check in IQ03 we get 003 and 004;ie 001 and 002 are skiiped.
Can anybody suggest how to avoid serial number generation while Check?

Hi,
Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
Thanks
Vikranth

Automatic serial number&equipment creation in goods receipt

Dear gurus,
We use to automatic serial number&equipment creation in goods receipt. While serial number master datas and equipment master datas were creating in goods receipt, how can we fill some fields for serial number and equipment master datas? (Instead of to use IQ02 and IE02 after every goods receipts for some default enteries) Any user exit or BADI?
Thank you.

Use user exits EXIT_SAPLIE01_005 and EXIT_SAPLIE01_007 in customer exit IQSM0005.
Regards,
Lakshman

Serial number generation

Hi friends,
I have a question regarding the serial number generation.
1. In serial number generation do we have option of generating either when creating and releasing the production order or when doing the GR for the production order.
If yes, please let me know how we can do that.
2. If we have the serial number activiated for the material can we use auto goods receipt for the material?
Thanks and regards,
Satish

Dear Satish,
Go to OIS2 and create the serial number profile which will be later assigned to the material master.
Select the serial number profile and select serializing procedure
Here,select "PPAU Serial numbers in PP order" and enter the value as desired in serial number usage column.
Similarly you can try for order release.
We cannot activate auto GR for the items with serial numbers.
regards,
Joseph Charles Vaikathussery

BAPI or FM for Get serial number

Hi,
       We ahve many material for whcih we are maintaining serial numbers, now we are excuting some T. code with 3rd party software and the communication is done through RFC, as in case of Material issue with movement type 201, for serialize material we have to enter the serial number, we can enter it manually or if we click on create serial number automatically, system get the automatic serial number, so thier any Function al module or BAPi for getiing serial number automatically for the materials. which we can use in RFC.
      regards,
        zafar

Hello,,
ASSIGN_SERIAL_NUMBER_SD        Listing of Material Serial Nrs
SERIAL_NUMBER_GET_MATERIALS Get Serial Nrs
SELECT_MATERIAL_SERIAL_NRS     Alternate method for selection of serial Nrs
Or esle check
Use - BAPI_EQUI_GETSTATUS i think it should give you the info
Or else check below given tables for your requirement
Tables,
SER00 General Header Table for Serial Number Management
SER01 Document Header for Serial Numbers for Delivery
SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
SER03 Document Header for Serial Numbers for Goods Movements
SER04 Document Header for Serial Numbers for Inspection Lot
SER05 Document Header for Serial Numbers for PP Order
SER06 Document Header for Serial Numbers for Handling Unit-Content
SER07 Document Header for Serial Numbers in Physical Inventory
EQBS Serial Number Stock Segment
EQSE Serial Number Records
EQST Equipment to BOM Link
EQUI Equipment master data
Regards
Mahesh Naik

Automatic serial number creation in delivery

Hello All,
Can you help me to know if any user exit available to create serial number for line item in delivery automatically.
Business does not want to use existing serial numbers and user may wrongly select the same. So need restrictions to use existing serial numbers and create new one automatically.
Regards,
Rohit

Hi Ulhas,
Check if User Exit - IQSM0001 (Automatic serial number assignment)
The other user exits are:
IQSM0002 Check when copying object list
IQSM0003 Serial numbers, user exit for additional data
IQSM0004 Serial numbers, user exit after exiting the serial screen
IQSM0005 Serial numbers, user exit in the update
IQSM0007 Serial numbers, user exit for goods movements
IQSM0008 Serial number character string check
REWARD if it helps you!!
Regards,
Ajinkya

How to create the automatic serial Number through DIAPI

Dear All,
i Tried to do the Inventory Transaction through DIAPI with Automatic Serial Number creation ,its working fine but i have problem when i choose another warehouse.Let me give an Example i have three ware house called W01,W02,W03 for the first ware house W01 i can automatically create the serail from 1 to 100, the moment when i choose the second ware house (i.e.,) W02 my serial number should start from 1.. any one can help me this regards
Thanks in advance
G.shankar Ganesh

Dear G.shankar Ganesh,
The serial number is unique in all warehouse in B1 system. It means if one item has serial number '1', then
you can not add the serial number '1' for all warehouse.
The DIAPI implements same logic as B1 application so it can not implement in DIAPI also.
Best Regards
Jane Jing

Adobe creative cloud is asking for a serial number for updates - where do I get this from?

Adobe Creative cloud is asking for a serial number for updates - where do I get this from
we have recently Bought 5 x 1 year licences and been using this a month
Michael

Hi Mick,
Please refer to the below link.
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
Thanks

Enhancement for Automatic Serial Number Generation

Similar Messages

Maybe you are looking for