Enhancement for Forecast split
Hi Experts,
In APO DP solution, we can split the monthly data in weekly buckets by using standard functionality and the data in weekly buckets can be viewed in Weekly Data view.
We want to enable the end user to change the weekly disaggregation interactively, For example. Monthly forecast of 5000 for the month of December is split in 5 weeks (1000 each week) and can be seen in weekly data view. Now if a demand planner wants to increase the forecast value from 1000 to 2000 in week 4 considering Christmas or other promotional activities etc. Then the forecast in other weeks should automatically adjust themselves such way that monthly forecast remains 5000 but week 4 has forecast as 2000.
One way of going about it is creating a complex macro in planning book where user can input percentage of disaggregation.
I wanted to know if there is any BADI avaialable for meeting such requirement.
Thanks in advance,
Prasanna
Hi,
I don't think you can achieve this using BADI.And also there is no BADI to change planning data as per your requirement.
You can use BADI macro.
Regards,
Sunitha
Similar Messages
-
Requesting detailed config and setup for forecast 'period splitting'
I have searched the SAP community, and found little detailed information about configuration and setup for SAP forecast 'period splitting'.
I have selected the standard scenario in the 'Splitting Indicator' (1 - 2 - 4) in MM03/MRP3 for splitting month periods into weeks - AND - I have set the MRP Type found in MM03/MRP1 to 'VV' as specified (with "obligatory forecast indicator set on, which supports forecasts to be used as a basis for MRP).
Doing so has not resulted in my monthly inputted forecasts being split into weeks.
I am thinking that there is some missing configuration that is needed. Please advise if you can.
Thank youBert,
Now I am more curious than ever. You mention that your forecasts are not generated by SAP, but are generated by an external forecasting program, using requirements type VSF.
This sounds like your interface program is entering Planned Independent Requirements, not forecasts (for VV MRP type, the MRP element for forecast requirements is called "FORERQ" and not "IndReq"). The field to which you refer ("Splitting indicator" in the MRP3 tab) has no impact on Planned Independent Requirements. To my knowledge, it only works with the integrated forecast generation program that is commonly used in VV MRP type.
Best Regards,
DB49 -
Looking for enhancement for the price control of purchasr oder
Hi,
I'm Looking for enhancement for the price control of purchasr oder
I need to develop programs to control the price of purchase orders according to some special rules while purchase order is creating, so,
can anybody tell me which enhancement is beeter to adopt?
Thanks and best regards.hi
following are there for purchase order...
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a
LMELA010 Inbound shipping notification: Transfer item data from IDO
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition releas
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toleranc
MM06E001 User exits for EDI inbound and outbound purchasing documen
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release order
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processin
MMAL0004 ALE purchasing info record distribution: Inbound processin
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
No of Exits: 36
to search for any enhancement you can use the following prog..
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute the report and enter the transaction for which u want to find the enhancement and execute. it would show the available enhancements for that tcode.
<b>Please do reward if useful</b>
Regards
Dinesh -
User exits/BAdIs for Forecast consumption by sales order
Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
RajStandard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar -
Forecast splitting not working correctly
Hello
I have a problem with the forecast splitting not working correctly. We are using 2M->W 2 MONTH IN WEEKS 0 GLEI and most of the time this appears to work fine but there are occasions where the forecast is split for May, did not split Jun but split July.
E.g.
06.05.2008 IndReq VSF 9,424-
12.05.2008 IndReq VSF 20,845-
19.05.2008 IndReq VSF 30,925-
27.05.2008 IndReq VSF 24,740-
02.06.2008 IndReq VSF 134,257-
01.07.2008 IndReq VSF 25,771-
07.07.2008 IndReq VSF 32,213-
14.07.2008 IndReq VSF 32,214-
21.07.2008 IndReq VSF 32,213-
28.07.2008 IndReq VSF 25,770-
Do any of you Guru's have any idea why this would happen?
Many thanks
SueI checked it in MD67
it is working fine.
In MD61 - my demand is 800 each for June and July. it hjas splited as below
system is dividing the total qty on daily basis and then multiplying by no days in that week covered by requirement
W 22.2008 26.667
W 23.2008 186.667
W 24.2008 186.666
W 25.2008 186.667
W 26.2008 186.667
W 27.2008 26.666
W 27.2008 154.839
W 28.2008 180.645
W 29.2008 180.646
W 30.2008 180.645
W 31.2008 103.225 -
Enhancement for BASIC_PURCHASE_PRICE_READ
Hi All,
I want to make some changes for FM BASIC_PURCHASE_PRICE_READ.
This is only possible through enhancement like userexits and BADI's
Does anyone knows what is enhancement for BASIC_PURCHASE_PRICE_READ.
Thanks in Advance,
Nitin Pin info record you can only have one price at a time. there is nothing in the info record that can make prices dependend on customers.
split valuation cannot do anything for you in this case.
you may just enter a basic price in the info record. and then add a surcharge or deduction in the PO.
for this surcharge/deduction you can maintain conditions with MEK1. you may need to customize a new access sequence that contains the customer (I have never tried it)
The question is: how does the PO know that it is for a certain customer? is it a third-party PO? is it with a account assignment to a sales order? -
Enhancement for t.code FBRA
Hi,
I tried using user-exit F050S006. i inserted a break-piont in the exit and executed transaction code FBRA but control doesnt go to this exit. please help me out in finding an enhancement while executing FBRA.
Regards,
Sonali.hi,
check this
Enhancement
F050S003 FIDCC2: Change IDoc/do not send
F050S002 FIDCC1: Change IDoc/do not send
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
SAPLF051 Workflow for FI (pre-capture, release for payment)
RFKORIEX Automatic correspondence
RFEPOS00 Line item display: Checking of selection conditions
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
Business Add-in
FI_FB08_SUBST_BUDAT FB08: Check Posting Date for Reversal of FI Doc. with FB08
FI_GET_INV_PYMT_AMT BAdI for determining the payment amount for an invoice
FI_HEADER_SUB_1300 Screen Enhancement for Document Header SAPMF05A
FI_PAYREF_BADI_010 BAdI: Payment Reference Number
FI_RES_ITEM_CURRENCY Document of Residual Item with Invoice Currency
FI_TRANS_DATE_DERIVE Derive BKPF-WWERT from Other Document Header Data
BADI_ENJ_ALT_ADR Go to alternative vendor/customer data
BADI_F040_SCREEN_600 Screen Enhancement on F040 0600 Document Header
BADI_FDCB_SUBBAS01 Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS02 Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS03 Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS04 Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
RFESR000_BADI_001 BAdI for Own Processing of POR Item
BADI_FDCB_SUBBAS05 Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_MIRO_SPLT_ADD Append additional fields of ACCVS to ACCIT
BADI_PRKNG_NO_UPDATE BAdI for Deactivating Update of Parked Documents
FVFZ Replacement for Function Modules of Function Group FVFZ
INVOIC_FI_INBOUND BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
F050S008 FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
AC_QUANTITY_GET Transfer of Quantities to Accounting - Customer Exit
ADJUST_NET_DAYS Change to Net Due Date
FBAS_CIN_LTAX1F02 Tax interface
FBAS_CIN_MF05AFA0 EWT - Downpayment Clearing - Tax transfer for CIN
FISPLIT Online Split: Cash Discount, Exchange Rate Differences
FI_AUTHORITY_ITEM Extended Authorization Check for Document Display (FB03)
FI_DOC_DISP_LI Diversion to Document Items (FB03)
Yogesh N -
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
So can anyone tell me how to fix this problem? I cant surf the web because as soon as I click on the Safari icon it will pop up for a split second then dissapear and take me to the Ipad homescreen. This happened when I downloaded the IOS 7.0.4. I have the IPAD 2.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
Suggest EnhanceMent For SALES area determination In stock Transfer.
Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka -
[SOLVED] Xorg Strangeness- Running startx runs xorg for a split second
As in the subject, I am trying to run startx on my Arch (x86_64) machine for the first time since installation, however X only runs for a split second before quitting.. I've checked the log, but there aren't any errors that pop up to tell me what's going on. What I've been doing that I think may affect the answer:
Installed proprietary nvidia drivers that I downloaded off of nvidia's website (though I removed it by running sudo ./driver.run -uninstall)
Installed nvidia drivers from the repository (sudo pacman -S nvidia nvidia-utils)
shut off nouveau drivers (blacklisted nouveau in /etc/modprobe.d)
Ran nvidia-xconfig to generate new xorg.conf file
/var/log/Xorg.0.log shows nothing with (EE), so I assume that everything is going smoothly, however still can't get X to work. Any help would be appreciated. Google's let me down so far.
Perhaps some fresh eyes could help me
(contents of /var/log/Xorg.0.log)
[ 22.116]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.116] X Protocol Version 11, Revision 0
[ 22.116] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.116] Current Operating System: Linux Ponyville 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64
[ 22.117] Kernel command line: root=/dev/sda4 ro
[ 22.117] Build Date: 30 May 2012 07:24:13PM
[ 22.117]
[ 22.117] Current version of pixman: 0.26.0
[ 22.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.119] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 7 08:50:45 2012
[ 22.148] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.148] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.166] (==) ServerLayout "Layout0"
[ 22.166] (**) |-->Screen "Screen0" (0)
[ 22.166] (**) | |-->Monitor "Monitor0"
[ 22.166] (**) | |-->Device "Device0"
[ 22.166] (**) |-->Input Device "Keyboard0"
[ 22.166] (**) |-->Input Device "Mouse0"
[ 22.166] (==) Automatically adding devices
[ 22.166] (==) Automatically enabling devices
[ 22.196] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.196] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.213] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.213] Entry deleted from font path.
[ 22.213] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.213] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/
[ 22.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.213] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 22.213] (WW) Disabling Keyboard0
[ 22.213] (WW) Disabling Mouse0
[ 22.213] (II) Loader magic: 0x7c58e0
[ 22.213] (II) Module ABI versions:
[ 22.213] X.Org ANSI C Emulation: 0.4
[ 22.213] X.Org Video Driver: 12.0
[ 22.213] X.Org XInput driver : 16.0
[ 22.213] X.Org Server Extension : 6.0
[ 22.214] (--) PCI:*(0:1:0:0) 10de:0dc4:196e:085a rev 161, Mem @ 0xf8000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 22.214] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.214] (II) LoadModule: "extmod"
[ 22.257] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.264] (II) Module extmod: vendor="X.Org Foundation"
[ 22.264] compiled for 1.12.2, module version = 1.0.0
[ 22.264] Module class: X.Org Server Extension
[ 22.264] ABI class: X.Org Server Extension, version 6.0
[ 22.265] (II) Loading extension MIT-SCREEN-SAVER
[ 22.265] (II) Loading extension XFree86-VidModeExtension
[ 22.265] (II) Loading extension XFree86-DGA
[ 22.265] (II) Loading extension DPMS
[ 22.265] (II) Loading extension XVideo
[ 22.265] (II) Loading extension XVideo-MotionCompensation
[ 22.265] (II) Loading extension X-Resource
[ 22.265] (II) LoadModule: "dbe"
[ 22.265] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.265] (II) Module dbe: vendor="X.Org Foundation"
[ 22.265] compiled for 1.12.2, module version = 1.0.0
[ 22.265] Module class: X.Org Server Extension
[ 22.265] ABI class: X.Org Server Extension, version 6.0
[ 22.265] (II) Loading extension DOUBLE-BUFFER
[ 22.265] (II) LoadModule: "glx"
[ 22.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.799] compiled for 4.0.2, module version = 1.0.0
[ 22.799] Module class: X.Org Server Extension
[ 22.799] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 22.799] (II) Loading extension GLX
[ 22.799] (II) LoadModule: "record"
[ 22.799] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.885] (II) Module record: vendor="X.Org Foundation"
[ 22.885] compiled for 1.12.2, module version = 1.13.0
[ 22.885] Module class: X.Org Server Extension
[ 22.885] ABI class: X.Org Server Extension, version 6.0
[ 22.885] (II) Loading extension RECORD
[ 22.885] (II) LoadModule: "dri"
[ 22.885] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.911] (II) Module dri: vendor="X.Org Foundation"
[ 22.911] compiled for 1.12.2, module version = 1.0.0
[ 22.911] ABI class: X.Org Server Extension, version 6.0
[ 22.911] (II) Loading extension XFree86-DRI
[ 22.911] (II) LoadModule: "dri2"
[ 22.911] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.911] (II) Module dri2: vendor="X.Org Foundation"
[ 22.911] compiled for 1.12.2, module version = 1.2.0
[ 22.911] ABI class: X.Org Server Extension, version 6.0
[ 22.911] (II) Loading extension DRI2
[ 22.911] (II) LoadModule: "nvidia"
[ 22.912] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.993] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.993] compiled for 4.0.2, module version = 1.0.0
[ 22.994] Module class: X.Org Video Driver
[ 23.021] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 23.021] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.021] (--) using VT number 7
[ 23.024] (II) Loading sub module "fb"
[ 23.024] (II) LoadModule: "fb"
[ 23.024] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.032] (II) Module fb: vendor="X.Org Foundation"
[ 23.032] compiled for 1.12.2, module version = 1.0.0
[ 23.032] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.032] (II) Loading sub module "wfb"
[ 23.032] (II) LoadModule: "wfb"
[ 23.032] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23.038] (II) Module wfb: vendor="X.Org Foundation"
[ 23.038] compiled for 1.12.2, module version = 1.0.0
[ 23.038] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.038] (II) Loading sub module "ramdac"
[ 23.038] (II) LoadModule: "ramdac"
[ 23.038] (II) Module "ramdac" already built-in
[ 23.047] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 23.047] (==) NVIDIA(0): RGB weight 888
[ 23.047] (==) NVIDIA(0): Default visual is TrueColor
[ 23.047] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.047] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.817] (II) NVIDIA(GPU-0): Display (ViewSonic VA1916wSERIES (CRT-1)) does not support
[ 23.817] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 23.831] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
[ 23.831] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 23.831] (--) NVIDIA(0): VideoBIOS: 70.06.13.00.51
[ 23.831] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 23.831] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 23.833] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 450 at PCI:1:0:0
[ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1)
[ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1): 400.0 MHz maximum pixel
[ 23.833] (--) NVIDIA(0): clock
[ 23.868] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.868] (**) NVIDIA(0): device ViewSonic VA1916wSERIES (CRT-1) (Using EDID
[ 23.868] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 23.874] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 23.874] (==) NVIDIA(0):
[ 23.874] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 23.874] (==) NVIDIA(0): will be used as the requested mode.
[ 23.874] (==) NVIDIA(0):
[ 23.874] (II) NVIDIA(0): Validated modes:
[ 23.874] (II) NVIDIA(0): "nvidia-auto-select"
[ 23.874] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 23.903] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 23.903] (--) NVIDIA(0): option
[ 23.903] (--) Depth 24 pixmap format is 32 bpp
[ 23.903] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 23.903] (II) NVIDIA: access.
[ 23.906] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 23.906] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 23.906] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 23.906] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 23.906] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 23.906] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 23.906] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 23.906] (II) NVIDIA(0): Config Options in the README.
[ 23.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 23.952] (II) Loading extension NV-GLX
[ 24.017] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 24.017] (==) NVIDIA(0): Backing store disabled
[ 24.017] (==) NVIDIA(0): Silken mouse enabled
[ 24.017] (**) NVIDIA(0): DPMS enabled
[ 24.017] (II) Loading extension NV-CONTROL
[ 24.017] (II) Loading extension XINERAMA
[ 24.017] (II) Loading sub module "dri2"
[ 24.017] (II) LoadModule: "dri2"
[ 24.017] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.017] (II) Module dri2: vendor="X.Org Foundation"
[ 24.017] compiled for 1.12.2, module version = 1.2.0
[ 24.017] ABI class: X.Org Server Extension, version 6.0
[ 24.017] (II) NVIDIA(0): [DRI2] Setup complete
[ 24.017] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 24.017] (==) RandR enabled
[ 24.017] (II) Initializing built-in extension Generic Event Extension
[ 24.017] (II) Initializing built-in extension SHAPE
[ 24.017] (II) Initializing built-in extension MIT-SHM
[ 24.017] (II) Initializing built-in extension XInputExtension
[ 24.017] (II) Initializing built-in extension XTEST
[ 24.017] (II) Initializing built-in extension BIG-REQUESTS
[ 24.017] (II) Initializing built-in extension SYNC
[ 24.017] (II) Initializing built-in extension XKEYBOARD
[ 24.017] (II) Initializing built-in extension XC-MISC
[ 24.017] (II) Initializing built-in extension SECURITY
[ 24.017] (II) Initializing built-in extension XINERAMA
[ 24.017] (II) Initializing built-in extension XFIXES
[ 24.017] (II) Initializing built-in extension RENDER
[ 24.017] (II) Initializing built-in extension RANDR
[ 24.017] (II) Initializing built-in extension COMPOSITE
[ 24.017] (II) Initializing built-in extension DAMAGE
[ 24.018] (II) Initializing extension GLX
[ 24.296] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.296] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.296] (II) LoadModule: "evdev"
[ 24.296] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.304] (II) Module evdev: vendor="X.Org Foundation"
[ 24.304] compiled for 1.12.0, module version = 2.7.0
[ 24.304] Module class: X.Org XInput Driver
[ 24.304] ABI class: X.Org XInput driver, version 16.0
[ 24.304] (II) Using input driver 'evdev' for 'Power Button'
[ 24.304] (**) Power Button: always reports core events
[ 24.304] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 24.304] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.304] (--) evdev: Power Button: Found keys
[ 24.304] (II) evdev: Power Button: Configuring as keyboard
[ 24.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 24.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.304] (**) Option "xkb_rules" "evdev"
[ 24.304] (**) Option "xkb_model" "evdev"
[ 24.304] (**) Option "xkb_layout" "us"
[ 24.317] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.317] (II) Using input driver 'evdev' for 'Power Button'
[ 24.317] (**) Power Button: always reports core events
[ 24.317] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 24.317] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.317] (--) evdev: Power Button: Found keys
[ 24.317] (II) evdev: Power Button: Configuring as keyboard
[ 24.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 24.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 24.317] (**) Option "xkb_rules" "evdev"
[ 24.317] (**) Option "xkb_model" "evdev"
[ 24.317] (**) Option "xkb_layout" "us"
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device UVC Camera (046d:09a1) (/dev/input/event5)
[ 24.319] (**) UVC Camera (046d:09a1): Applying InputClass "evdev keyboard catchall"
[ 24.319] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a1)'
[ 24.319] (**) UVC Camera (046d:09a1): always reports core events
[ 24.319] (**) evdev: UVC Camera (046d:09a1): Device: "/dev/input/event5"
[ 24.319] (--) evdev: UVC Camera (046d:09a1): Vendor 0x46d Product 0x9a1
[ 24.319] (--) evdev: UVC Camera (046d:09a1): Found keys
[ 24.319] (II) evdev: UVC Camera (046d:09a1): Configuring as keyboard
[ 24.319] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input5/event5"
[ 24.319] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a1)" (type: KEYBOARD, id 8)
[ 24.319] (**) Option "xkb_rules" "evdev"
[ 24.319] (**) Option "xkb_model" "evdev"
[ 24.319] (**) Option "xkb_layout" "us"
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 24.320] (**) Logitech USB Receiver: always reports core events
[ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 24.320] (--) evdev: Logitech USB Receiver: Found keys
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/input/input3/event3"
[ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 24.320] (**) Option "xkb_rules" "evdev"
[ 24.320] (**) Option "xkb_model" "evdev"
[ 24.320] (**) Option "xkb_layout" "us"
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 24.320] (**) Logitech USB Receiver: always reports core events
[ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 24.320] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 24.320] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 24.320] (--) evdev: Logitech USB Receiver: Found relative axes
[ 24.320] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 24.320] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 24.320] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 24.320] (--) evdev: Logitech USB Receiver: Found keys
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 24.320] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 24.320] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 24.320] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.1/input/input4/event4"
[ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 24.320] (**) Option "xkb_rules" "evdev"
[ 24.320] (**) Option "xkb_model" "evdev"
[ 24.320] (**) Option "xkb_layout" "us"
[ 24.320] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 24.320] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 24.320] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 24.320] (II) No input driver specified, ignoring this device.
[ 24.320] (II) This device may have been added with another device file.
[ 24.321] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[ 24.321] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 24.321] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 24.321] (**) Eee PC WMI hotkeys: always reports core events
[ 24.321] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event2"
[ 24.321] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 24.321] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 24.321] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 24.321] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input2/event2"
[ 24.321] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 24.321] (**) Option "xkb_rules" "evdev"
[ 24.321] (**) Option "xkb_model" "evdev"
[ 24.321] (**) Option "xkb_layout" "us"
[ 24.497] (II) evdev: Power Button: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Power Button: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: UVC Camera (046d:09a1): Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Logitech USB Receiver: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Logitech USB Receiver: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Eee PC WMI hotkeys: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.680] Server terminated successfully (0). Closing log file.
Contents of Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by Glupoi652 (2012-06-07 20:51:53)windscape wrote:
wgetfree wrote:It may be a stupid question but do you have all the Xorg dependencies?
It may even be simpler than that. If this is a new installation, a desktop environment or window manager may not be installed. In that case, the Xorg server has nothing to do. Install a desktop environment or window manager and see if Xorg continues running once it has something to do.
Listen to this man. What I meant by Xorg dependencies is that people usually install xterm, xclock, etc so they have a very basic WM set up so they can see that Xorg is in fact working. Try setting up a .xinitrc with the following in it:
exec startxfce4 --with-ck-launch
Or even try to launch it manually with:
$ startxfce4 -
Badi / Exit / Enhancement for replacing INSMK during PO creation
Hi Gurus,
we want to default the INSMK field (stock type) during Purchase Order creation..
Can someone help me findind the right BAdI / exit / enhancement for it?
Thanks in advance,
Regards,
AlessioHi Alessio,
You may check these first:
Re: Negative postings to MVER table
Re: select stock type
Thanks,
Gordon -
I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.
Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I have found in a webpage (http://edr-enhanced-for-labview.software.informer.com/8.5/ ) that a version developed by National Instruments for version 8.5 exists, it says it is free, but i cant find it. Does anyone knows if a newer version exist? or where can I find the latest one?? Please help.
Thanks in advance.
Alejandra NI does not develop drivers for third-party DAQ devices. Contact the vendor or use the driver you have. You can load version 6 and 7 into LabVIEW 2010.
-
I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!
Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.
Maybe you are looking for
-
I am in the process of upgrading from Premiere Elements 2.0 to Premiere Elements 7, and also from Windows XP to Windows 7. I have XP on one hard drive, and Windows 7 on another. I've installed Premiere Elements 7 on the Windows 7 disk. When I creat
-
Using Adobe LiveCycle Designer ES and secure parts of form using signatures.
Hi to all ... I have upgraded to new LiveCycle Desinger 8.1 few days ago, and still do not know all the new features. I was requested to develop new LiveCycle Form, but this time it has to be secured by Digital Signatures or what every appropriate me
-
How can I get firefox to remember my password?
I removed my user name and password under stored passwords because the password was changed. How can I get it to store the user name and password again because the pop up for it never shows up?
-
Timing Card with BNC output ??
Hello all, I just have a short question: At the moment I am using the NI PCI-6503 5V TTL/CMOS card to send a TTL pulse through to a Sirah Dye Laser. However, the input of the laser is via a BNC cable. So in order to send the TTL pulse, I have a CB-50
-
How to fade out lines of scrolling Text as they reach top of screen
Hello, What I require is scrolling text (full screen width) & the ability to make the lines of text fadeout as they reach the top of the screen. Making the scrolling text fade out as it reaches the top of the screen is easy with Final Cut Express & I