Enhancements to an IDoc

Hi All,
I have a requirement wherein i have to check for
the existing enhancements for a IDoc say MATMAS.
Please let me know the procedure of searching the same.
Thanks in advance.
Trinath

Hi Trinath,
There is no standard procedure to find the enhancements.
For some cases SAP provides the "Function Module Documentation" for the underlying Function Module of IDoc.
For Example : PORDCR101 IDoc ( Purchase Order ) . BAPI_PO_CREATE1 is the FM . We can find the enhancements and all other information in the Function module documentation itself and also general OSS NOTE number as well.
If we go back to MATMAS. There is no documentation in the FM IDOC_INPUT_MATMAS01. But way to find Enhancement is :
1 ) Search with "Customer-Function" in the FM IDOC_INPUT_MATMAS01. You will find the enhancements.
2 ) Search with "MATMAS" in SE18. You will find the enhancements.
Better way is SEARCH the <b>OSS NOTES</b> related to Message type. You will find lot of information but search for general OSS note for that message.
Hope this information is helpful. Let me know if you need any further help.
Regards,
Siva

Similar Messages

  • Enhanced Fields in IDoc Message Type CRMXIF_ORDER_SAVE_M

    Dear Experts,
    I have enhanced the Business Transaction with EEWB and is used in Complaint Handling scneario. Now, I need to send the IDoc for the complaints. So, I have used the Message Type CRMXIF_ORDER_SAVE_M for this. But this message type does not have the Custom Fields which were enhanced. When  I searched on the internet, I found the solutions to Re-generate the IDoc after adding fields in CRMXIF_CUSTOMER_H Segment. But when I try  to do that it is asking  for Access Key. I think there must be another way.
    Please guide me.
    Regards,
    Sreenivas Raju.

    Hey Sreenivas,
    Standard provided Idoc will not have segments for Z fields that you add using AET/EEWB. How did you try to regenerate Idoc? You need to use transaction BDFG to generate a custom Idoc.
    Follow the steps below.
    1. Create a Z function group.
    2. Run BDFG. Enter 'CRMXIF_ORDER_SAVE' in parameter for function Module and press enter. It will list the available message types including 'CRMXIF_ORDER_SAVE_M'
    3. Press Create button in application toolbar. A popup will come. Give a name for new message type. Another popup will come, give names for inbound/outbound functions using the Z FG you created, suitable development class and press enter.
    4. Now view your message type. Go to the idoc type and release it.
    5. Finally selecting your new Z message type, go to menu Edit->Idoc Type and Segment Type->Release. Release your objects. There may be a few popups, respond accordingly.
    6. Maintain partner profile settings. Process code will be APLI or APLM as per your need.
    Voila!! You have your new message type having segments for Z fields.
    Let me know the outcome.

  • Enhanced receiver determination - Idoc 2 Idoc scenario

    Hi,
    I am trying Enhanced receiver determination - in an Idoc 2 Idoc scenario.
    But when I selected Enhanced receiver determination in ID, it is asking for interface mapping.As it is an Idoc 2 Idoc scenario, I did not create any mapping objects in IR.
    Is there any round about for this.
    reg,

    Hi,
    if you are planning to send the Idoc to two systems then you do not need Enhanced Recieevr Determination.
    You can add multiple Receivers In the receiver Determination under Configured Receivers and now the same idoc will be sent to 2 receivers.
    Like mentioned by moorhty, Enahnced Receievr Determination allows you to dynamically determine receivers using a mapping program.! I dont think that is needed in your case
    Regards
    Bhavesh

  • Required Enhancement Package for Idoc Adapter in Java

    Hi experts,
    I just would like to know which Enhancement Package I need for PI 7.1 when I want to have the Idoc adapter to be implemented in Java and not only in ABAP.
    Thanks and regards.
    Oliver Vöpel.

    I talked to someone from the SAP development. They told me it will be realized in enhancement package 2 or 3.
    Thanks and best regards.
    Oliver Vöpel.

  • Enhancement for creating IDOC.

    Hi All,
    I have a requirement in which I have to generate a IDOC of type INSPECTIONPLAN_CREATE01 everytime Inspection Plan is created(QP01), changed(QP02) or deleted.
    Can anyone suggest me the appropriate enhancement or BADI for the same.
    Regards,
    Monica

    Pl see if you can use any of the following three exits.
    EXIT_SAPLCQBM_001
    EXIT_SAPLCQBM_002
    EXIT_SAPLCQBM_003
    2 BADIs being called -
    IMRM_TL_WORKFLOWS
    CP_DIG_SIGNATURE
    <b>Reward points</b>
    Regards

  • Enhancements in Outbound IDoc Processing

    Hi,
    How do I find the function module where the Outbound IDoc structures are filled.
    Basic type: SHP_OBDLV_SAVE_REPLICA02
    Message type: SHP_OBDLV_SAVE_REPLICA
    Thanks,
    Regards,
    Morten

    go to transaction WE57 and search for messagetype/idoc type.

  • Enhancement for inbound idoc posting(idoc_input_ordrsp)

    hi,
    please find solution for the below.
    business senario: when the vendor send purchase order confirmation through idoc a automated acknowledgement has to be send.
    technical: when vendor send idoc (orders05) it updates with FM (idoc_input_ordrsp) our system.
    but in the idoc a segment E1EDP19 will have the field IDNLF which has to be filled to send a  acknowledgement .
    in my case:
    the user  some times will fill the segment so to get automated acknowledgement we have to write an enhacement to populate the segment in inbound  FM.
    i have written code in EXIT_SAPLEINM_007. and populated the data in internal table. but the changed data in internal table  is not reflecting in processed idoc(in we02 direction 2).

    idoc_data is the intenal table which hold all the segment data in run time.
    now i fetched matnr from ekpo table populated E1EDP19
    and modified the internal table by adding idoc_data-sdata when idoc_data-segnam is E1EDP19 .
    ultimately the sdata is reflecting in the idoc_data-sdata for the segment.
    but when we check in  we02  for the processed idoc the changes are reflecting.
    give me a solution for the data to reflect in processed idoc.

  • Enhancement for inbound idoc

    Hi gurus
    one help....
    i need to read the of purchase requsition from inbound idoc , basic type purqchg02
    iam unable to find its exit, plz help me asap....

    idoc_data is the intenal table which hold all the segment data in run time.
    now i fetched matnr from ekpo table populated E1EDP19
    and modified the internal table by adding idoc_data-sdata when idoc_data-segnam is E1EDP19 .
    ultimately the sdata is reflecting in the idoc_data-sdata for the segment.
    but when we check in  we02  for the processed idoc the changes are reflecting.
    give me a solution for the data to reflect in processed idoc.

  • Enhancement for Incoming IDOCs

    Hi All,
    For the incoming Idoc the invoices are getting parked for the success status 53, after checking whether GR is done or not.
    My requirement is that the Invoice should be parked even if the IDOC status is Error ie 51.
    The Message type is - INVOIC
    IDOC type is - INVOIC01
    and the process code is INVL
    How to go about it ?

    Hi Reddy,
    Thanx, can u elaborate this..
    DP

  • PAYEXT IDOC Enhancement for Japan

    Hi
    We are looking to enhance the PAYEXT IDOC - for Japan. Can anyone tell me the program/function module that is triggered to create PAYEXT IDOC from F110.
    Appreciate your help!
    Regards

    HI,
    RFFOEDI1 is the program which creates PAYEXT IDOC you can configure this through FBZP transaction.
    Inorder to to execute this program RFFOED11 through F110.
    Regards,
    Shanmugavel Chandrasekaran

  • Problem with IDoc for an outbound delivery

    Dear All,
    I am facing a problem with the IDoc defined for an outbound delivery.
    Scenario:
    Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
    What I did:
    I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
    I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
    What I can do:
    I can issue an IDoc message, it looks ok and contains the standard data.
    Problem:
    It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
    Am I using the proper exit? I appreciate any suggestions.
    Thanks,
    Grzegorz Skorus

    Hello Grzegorz
    Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
    Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases,  it may help you.
    Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
    Futher  the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
    Hope this helps and others will pitch in.
    1498409 - Valuation Type unavailable when creating deliveries using IDOC
    631913 - Exit after formatting delivery IDoc type DELVRY

  • Doubts in ale/idoc

    hi abapers please guide me
    1. what is process code why use this?
    2. what is collect idoc in partner profile?
    3. diffrences between enhance idoc custom idoc and extending idoc?

    Hi,
    1. what is process code why use this?
    Ans - Process code will be used to process the applicate data, which we will attach in the inbound partner profile. To the process code we can attach either function module / workflow. Check the transaction code - WE41 & WE42 for more understanding on process codes.
    2. what is collect idoc in partner profile?
    Ans: We can process idocs individually or as package. If you select Collect idocs, then all idocs will be buffered until you process those idocs manually with the help of standard program RSEOUT00 program. It means until you execute this program data wont be updated in the database. 
    3. diffrences between enhance idoc custom idoc and extending idoc?
    Ans:
    Extending Idoc & enhance idocs , both are same. It means when you create the idoc first time then we will call that idoc type as Basic type and when you enhance the existed idocs with new segments then we will call it as extendings idocs.
    Thanks
    jaya
    Reward, if its useful for you.

  • How to find the Standard Program associated with a Standard IDOC

    Hi,
          I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

    Hi,
    For outbound IDoc the program can be found:
    1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
    2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
    For Inbound IDoc the program can be found:
    Via WE42 where inbound process and its related inbound function module is maintained.
    In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
    For extending IDoc look at the following links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
    It can be summarized as follows:
    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    - Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    - Click on Create new and enter a description and press enter.
    - Click on ZIDOCTYPE01 and then on the Create icon.
    - Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    - Enter a description for your segment type and create.
    - Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    - Save and generate, press back
    - To release the segment choose Goto, Release from the menu.
    - Check the box on the line of your segment.
    - Save, back and enter.
    - Your Idoc type structure should be displayed with your new segment.
    - Save and back.
    - To release the Idoc type choose Extras, Release type from the menu and Yes.
    Hope this helps.
    Regards,
    Gajendra.

  • Regarding new segment in Idoc

    Hi,
        I have created a new segment ZDH_HAZMAT  for hazardous materials for the idoc type ZDH_ORDERS and released it for purchase order. Actually modifying the segment data for already existing Idoc segments (E1EDP01) is possible and i have done it using user exit MM06E001. When a new segment (ZDH_HAZMAT) is added, it's showing a syntax  error . Waiting for earliest reply.
                                                            Thank you.

    Hello,
    You must keep a an IF condition like this in selection program's user exit.
         if Segmetn-Name eq <New segmetn>
             break <user name>
        end.
    It must stop other wise the enhancing the standard Idoc type is wrong. And so you need to check whether it is activate / released the new segment properly.
    All the very best for you.
      - Mohan Vamsi

  • Some question on IDOC (Control Record/Data Record/Status Record)

    Dear all,
    I am new in this area, and would like to enquire some question on this topic.
    When I view a IDOC via WE02, each of the IDOC record will consist of Control Record/Data Record/Status Record).
    Questions:
    I notice that the data records consists of many segment (i.e. E1EDK01, etc) which are use to store application data.
    1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
    2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
    3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
    Thanks.
    Tuff

    Hi Tuff,
    As everything in SAP, with IDOCs too there are
    1) Standard IDOCs
    2) Standard IDOCs(Extending - Enhancement to an IDOC, to accomodate for custom values)
    3) Custom IDOCs
    And every IDOC has,
    Control record - EDIDC Structure - This mostly reflects the partner profile information, along with few more details which are used for IDOC extension, Sequencing etc
    Data Records - EDID4 Structure - These records contain the actual business data of the document in concern. So for ORDERS05 it would contain order details, INVOIC02 - Invoice details so on...
    Status Records - These records capture the status of an IDOC from the time it is received/sent from your system and a corresponding business document is created/changed. So this will have messages like "IDOC sent to the port OK" etc which are status from the communication layer(ALE) to application specific messages like "Sales Order XXX created" or "Invalid Material" etc.
    You would have noticed something called as Process code in the partner profile, this is associated with a FM(or work flow task etc) which has the business logic coded in.
    So in case of an Inbound IDOC, the sending system updates the IDOC - Control and Data records, and sends it to the receiving system. On the receiving system the IDOC's control record is validated against the partner profiles set, if an entry is found then using the process code it finds the associated FM which will decode the data from the IDOC data records as per the IDOC type and then use it to post data into SAP (VIA BDC, Batch Input, BAPI etc).
    And all this while the Status records are being updated accordingly.
    So with the above context will try to answer your questions,
    1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
    In case of a custom IDOC, yes you will have  to.
    In case of a standard IDOC, you wouldn't have you just have set up the necessary configuration (Partner Profile, Process code etc)
    In case of a standard IDOC extended to accommodate for some custom values(for which there are no fields in standard IDOC - Let us say you have added some new fields on VA01) - In this case you can still use the standard Process code and Standard FM associated with it, SAP provides several Function exits in these FM's which you can leverage to add your custom logic.
    2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
    There are several documents available on the net and on SDN detailing step by step approach for all the above three cases,
    just search for step by step guide for IDOCS - sap.
    3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
    Again it depends, in case of using a standard IDOC you wouldn't have to. But in case you have some customizations/enhancements then you might have to.
    For Ex: updating the control record accordingly for indicating that you have extended the standard IDOC. Or append custom messages to the status record as per the business logic.
    Try out the examples you find on the net and post any specific questions you might have.
    Regards,
    Chen

Maybe you are looking for