Ensure files in FTP?

Hi All,
Can you share your experience on following questions:
PI triggers on its own and ensures the files are available on FTP server on or before 6 PM every Wednesday.
Scheduling adapter we can make it and creating the adapter module can possible , i think so. or is there any other way or FTP receiver adapter having any parameters would help us for ensures delivery?
How PI will make sure the data is completely sent to FTP? Is there any CHECKSUM/ other way to handle?
Thanks,
Shankar

Hi
You can configure ATP for your receiver channel to schedule your cannel to run at 6 Pm every Wednesday.
There is no way to ensure but as Quality of service is Exactly once for File adapters, it is assumed that files are delivered unless it failes due to connection error.
Refer this link for ATP configurations
http://help.sap.com/saphelp_nw04/helpdata/en/44/2a1a8620323f0ee10000000a114a6b/frameset.htm
- Deepak.

Similar Messages

Connection refused Error while writing file to FTP server.

Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.

Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location.

How can I send files by FTP with Oracle Portal?

I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas?

Enrique,
Are you trying to transfer more content from remote locations to expose as items within a portal page? By itself, the Oracle Portal runs within the context of the database so I'm not sure how FTP at the OS level will help. However, if you're attempting to transfer files from a remote PC to upload within the Portal, here are a couple of suggestions.
Option 1:
A. Create a portal page.
B. Convert a region to Items.
C. When you're challenged to upload a file from the local OS, ensure you've a drive mapped to your remote location and pick the file to upload into the Oracle9iAS Portal.
Option 2:
Alternatively, the Oracle9iAS Portal 9.0.2 supports the WebDAV protocol(Web-based Distributed Authoring and Versioning Protocol) allowing endusers with a WebDAV client to upload content into the Portal seamlessly from their desktop.
Pls. check out:
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
Hope that helps!
Thanks,
Sudi Narasimhan
Oracle9iASPortal Partner Management/Development
I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas?

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

No Data in PDF file in FTP server

Hi All,
I am trying to place a PDF file in FTP server.
Used
CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
SCMS_TEXT_TO_XSTRING
FTP_R3_TO_SERVER to transfer data to FTP.
I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.

To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
I will show with an example.
tables itcpo.
DATA: ch_otf TYPE STANDARD TABLE OF itcoo.
DATA: w_otf TYPE itcoo.
DATA: w_pdf TYPE solisti1. "For PDF
DATA: i_content_txt TYPE soli_tab.
DATA: temp1 TYPE sx_format VALUE 'OTF',
        temp2 TYPE sx_format VALUE 'PDF'.
DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
DATA: w_transfer_bin TYPE sx_boolean. "Content
DATA: i_content_bin TYPE solix_tab, "Content
        wa_content_bin TYPE solix,
        i_objhead TYPE soli_tab.
itcpo-tdnoprint = 'X'.
itcpo-tdpreview = 'X'.
itcpo-tdgetotf = 'X'.
These three parameters need to be passed along with other required parameters
CALL FUNCTION 'OPEN_FORM'
       EXPORTING form = xformular
                 language = ekko-spras
                 OPTIONS = itcpo
                 archive_index = toa_dara
                 archive_params = arc_params
                 device = xdevice
                 dialog = xdialog
                 mail_sender        = sender
                 mail_recipient     = recipient
       EXCEPTIONS canceled = 01.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = RESULT
    tables
      otfdata = ch_otf.
LOOP AT ch_otf INTO w_otf.
    CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
    INTO w_pdf.
    APPEND w_pdf TO i_content_txt.
ENDLOOP.
converting otf file to pdf file
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
      format_src      = temp1        "'OTF'
      format_dst      = temp2        "'PDF'
      devtype         = c_printer
    CHANGING
      transfer_bin    = w_transfer_bin
      content_txt     = i_content_txt
      content_bin     = i_content_bin
      objhead         = i_objhead
      len             = v_len_in
    EXCEPTIONS
      err_conv_failed = 1
      OTHERS          = 2.
Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
I think this will be helpful for you

How to read the file from ftp server

Hi
I need to read a file from a ftp server . Iam using apache lib common-net .jar .
FTPClient ftp = new FTPClient();
ftp.connect(server);
ftp.login(username,password);
FTPFile[] files = ftp.listFiles();
for(int i=0 ;i<files.length;i++){
System.out.println(" File : "+ i + " - " + files);
InputStream ip = ftp.retrieveFileStream(path);
I got the inputstream from the ftp server. but iam not able to read the contents of the file ....
help me plzzzzz

Hi
I have one more problem . first i try to read the file and write the file in local directory . then i try to read the data in the remote file .. iam getting the datas as null.
InputStream ip = ftp.retrieveFileStream(path);
File f = new File("D:\\ftp.txt");
FileOutputStream fo = new FileOutputStream(f);
byte[] buf = new byte[1024];
while ((len = ip.read(buf)) > 0) {
fo.write(buf,0,len);
fo.close();
BufferedReader br = new BufferedReader(new InputStreamReader(ip));
String line;
do {
line = br.readLine();
System.out.println(" data " +line);
}while (line != null);

Error while downloading PDF file from FTP Server

Hi Friends,
I have sent a PDF file with data to FTP , Then i want to check that uploaded pdf file , whether that is correct or not?
for that , i have downloaded that file from FTP and i am trying to open the file . but it is giving this problem .
"There was an error opening the document . The file is damaged and could not be repaired."
will you suggest me regarding this.
thanks in advance.
balaji.T.

CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
          EXPORTING
       SRC_SPOOLID                    = spoolno
            src_spoolid                    = wa_file-rqident
            no_dialog                      = ' '
      DST_DEVICE                     =
      PDF_DESTINATION                =
          IMPORTING
            pdf_bytecount                  = numbytes
            pdf_spoolid                    = pdfspoolid
      OTF_PAGECOUNT                  =
            btc_jobname                    = jobname
            btc_jobcount                   = jobcount
          TABLES
            pdf                            = pdf
          EXCEPTIONS
            err_no_otf_spooljob            = 1
            err_no_spooljob                = 2
            err_no_permission              = 3
            err_conv_not_possible          = 4
            err_bad_dstdevice              = 5
            user_cancelled                 = 6
            err_spoolerror                 = 7
            err_temseerror                 = 8
            err_btcjob_open_failed         = 9
            err_btcjob_submit_failed       = 10
            err_btcjob_close_failed        = 11.
because of this one PDF internal table is obtained.
       OPEN DATASET L_FILENAME FOR OUTPUT in text mode MESSAGE MSG.
LOOP AT pdf.
    CONCATENATE pdf-tdformat       "Material group
                 pdf-TDLINE       "Basic Material
           INTO ITEXT-TLINE ..
    APPEND ITEXT.
    TRANSFER ITEXT TO L_FILENAME.
ENDLOOP.

Problem while reading the file from FTP server

Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
Gowrishankar

Hi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda

How to read .xls file from FTP server t oInternal table

Hi
am using the FTP_SERVER_TO_R3 to read xls file from FTP server to internal table
but the data i get in LT_TEXT is special characters.
CALL FUNCTION 'FTP_SERVER_TO_R3'
EXPORTING
handle = hdl
fname = f_name "ProdDataFromCRM.xls.
* CHARACTER_MODE = 'X'
* IMPORTING
* BLOB_LENGTH =
TABLES
BLOB = lt_text
* TEXT = lt_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4
can any one help me out to get the exact data..
Really appreciate your quick response..
Thank You

Hi, if you really retrieve an excel file, you can not see the data in ABAP. You may see them in Excel. For this you may use
CALL METHOD document->open_document_from_table
of the interface i_oi_document_proxy for OLE objects. You can access the data with reference to the interface i_oi_spreadsheet.
Please check [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf] for details.
But, who knows, perhaps you want "And Now For Something Completely Different".
Regards
Clemens

Need to copy .txt file from FTP server and downloaded on local server directory.

I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

How to read XL file from FTP server

Hi all,
I have a requirement like to read file from FTP server using path
ftp:
10.212......\DTR\DTR_ Accounted_Out
and again save other file in same location ,
to doing this RFC connection is required?
give a procedure or program to do this requirement ..
To create rfc for FTP which connection type can i use ?
Give complete settings to create rfc destination

Hi Rakhi,
Use the below code to check if you have received the proper data.
call function 'FTP_SERVER_TO_R3' "Get data as character instead of BLOB
    exporting
      handle         = hdl
      fname          = docid
      character_mode = 'X'
    tables
      text           = chardata.
If the data is incorrect, it is possible that you are in the wrong directory.
Use
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = 'cd mydir\mysubdir' "cd <space> your path
    tables
      data          = result
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3.
Regards,
Jovito.

Problem with downloading file from FTP server

Hello all
I have uploaded a file from an application i developed and i want to download this file from another application. The code is
public static void FTPcon() throws FtpException{
   String hostname = "my.ftp.server";
   String username = "myusername";
   String password = "mypass";
   Ftp ftp = new Ftp(hostname,username,password);
   ftp.setHostname(hostname);
        ftp.setUsername(username);
        ftp.setPassword(password);
        ftp.connect();
        ftp.setBinary();
        ftp.download("file.dat");
        ftp.disconnect();
}The error i receive is java.io.FileNotFoundException: public.dat (The system cannot find the file specified) but the file is on the server.
Thanks in advance for any help

Cotton thank you for your reply
Any other sugestions please?The server disagrees. So...
- the file does not existThe file exists.I checked it with an FTP client program.
- the file has a different nameThe file name is correct
- you are connected to the wrong serverI am connecting to the correct server
- you are in the wrong ftp directoryThe file is placed in the home directory
- the ftp library you are using is broken (less
likely)I am using the library from jscape.I dont think is broken because i can upload the file from the first application.
>
FTP isn't somehow broken in Java. I use it all the
time. The problem is something listed above. I would
check all of the first four if I were you because
that's most likely where the problem is.Message was edited by:
flightcaptain

Problem in download file from FTP server

Hi
I want to download a file from FTP server for that i am using the apache FTP module but i am not getting how to download a file with that api i can dispaly the list of files and folders but not able to download the file or folder can any one help me in this
Thanks
Ninad

Hi
I think you miss understood something I am writing a program to download the file in Java where i have used the jakarta.apache api for that and getting problem in that bellow is the code where I have written to print the directory & file names but I don't know how to download the file
FTPClient ftpConnection = new FTPClient();
ftpConnection.connect(host);
ftpConnection.login(FTPConnection.userName,FTPConnection.password);
FTPFile fileList[] = ftpConnection.listFiles();
for(int i=0;i<fileList.length;i++)
System.out.println(fileList.getName());
thanks
Ninad

How to get file from FTP Server using File Control

Hi,
Any one did getting file from FTP Server?
Please let me know any one help me.
I would need to get file from FTP Server.
Thanks,
Madhu

Yes I have done that. But In FTP Server I cannt read file, because no previliges. Only I need to copy file from FTP Server to local server then only I can read that file.
I tried all options using FileConrol(getFiles(),read()).
getFiles() - It wont copy the file, it give information about file.
read() - I dont have previliges to read the file.
Please tell me any other procedure would be there for getting file from FTPServer.
Thanks,
Madhu

Downloading excel file from FTP Server to Application Server

Hi,
I have to get data from an excel file available on FTP server into an Internal table.Can I use FTP_SERVER_TO_R3 to do so.
Please let me know if there are any function modules available to do this.
Thanks,
Prasuna.

Dear Gayatri,
You can get the file from FTP to internal table...
I am sending you the code with inline comments ....Hope this will be helpful to you.
Data: lv_key           TYPE i VALUE 26101957.
Data: lv_password(30) TYPE c.
i_rfc_destination = 'SAPFTP'.
lv_length = STRLEN( i_password ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = i_password "give ftp server pwd
      sourcelen   = lv_length
      key         = lv_key
    IMPORTING
      destination = lv_password.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = i_user "give ftp user name
      password        = lv_password
      host            = i_host
      rfc_destination = i_rfc_destination
    IMPORTING
      handle          = lv_ftp_handle
    EXCEPTIONS
      not_connected   = 1
      OTHERS          = 2.
    CONCATENATE 'cd' i_folder_path INTO lv_cmd SEPARATED BY space.
*i_folder path is the path in ftp server where file is stored
    CALL FUNCTION 'FTP_COMMAND'
      EXPORTING
        handle        = lv_ftp_handle
        command       = lv_cmd
      TABLES
        data          = result
      EXCEPTIONS
        command_error = 1
        tcpip_error   = 2.
     lv_blob_length = 392.
     TRANSLATE i_filename TO LOWER CASE.
      CALL FUNCTION 'FTP_SERVER_TO_R3'
        EXPORTING
          handle      = lv_ftp_handle
          fname       = i_filename          "give required file name
        IMPORTING
          blob_length = lv_blob_length
        TABLES
          blob        = lt_dummy.
Regards
Sajid

Ensure files in FTP?

Similar Messages

Maybe you are looking for