Enter data in TEB

I would just like to make sure the user enters text into the TEb, does not matter what they enter.
What's the easiest way to do this?
Thanks

The easy way I can think of would be to hide the playbar from that particular slide.(cpCmndShowPlaybar=0)
And set the One exit action of slide to be -- No Action. Allow -- infinite attempts on the TEB.
This should ensure that user shares their response to it.
Thanks,
Anjaneai

Similar Messages

Can we enter data in multiple currencies in BPC

Hi all,
In BPC, is it possible to enter data in transaction currencies other than in local currency? For example, if the local currency of an entity is USD, but I need to enter data for the same Accounts in EUR, MYR and SGD as well and not have the system translate the amount in local currency to EUR, MYR and SGD.
Thanks.

Hi Tara,
Thanks for your response.
There are several reasons why we might need to enter the data in various currencies other than the local currency.
Firstly, like you have mentioned, we need to enter the local as well as the translated currency amounts for accounts that have to be translated at historical rates. Examples of such accounts will be equity account as you have pointed out. If I understand you correctly, you are saying that it is possible to enter an amount in translated currency in addition to entering the amount in local currency?
Secondly, due to requirements of a relatively new accounting standard, companies need to quantify the sensitivity of any exposures to a foreign currency to foreign exchange rates changes.
For example, the local currency Entity A is USD and it has a bank deposit in SGD 200. If the exchange rate at report date is USD 1 to SGD 2, the SGD bank deposit will be translated and reported as USD 100. Accounting standard requires the company to quantify how much the company will stand to gain or lose if the foreign exchange goes up by 10% or goes down by 10%.
Thirdly, accounting standard also dictates that company discloses exposures to all currencies for financial instruments not denominated in the functional currency of the entity.
Regards

Can we enter data in any standard table directly through custom form??

Dear All,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,

Hi,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,
I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
Therefore I would not recommend this brother.
Thanks &
Best Regards,

Not able to enter data in query designer

hi
can any one help, i created a input ready query on multi provider contain both standered and real time cube, here real time cube not contain any data.
when i created layout by taking 2 chracteristics and 2 key figures from real time cube it give me like " no data available".
what i have to do here to enter data to realtime cube key figure

First check if you have created aggregate level.
Second check the loading behavior setting on the Realtime infocube- it must be set to "Real- Time Data Target can be planned, data loading not allowed'.
Third, query must be also input ready- in other words set the Selections (key figures) to input ready in Query designer.
Finaly, when you open context menu over the query, Bex Analyzer' Analysis grid, you can check the input ready settings for every cell if you want. If you did all steps, mentioned in the text above, input ready check box will be automatically checked for every cell of input enabled keyfigures...
Alex.

How can I read the last cell of a JTable that a user Enters data

I have a one column JTable with several rows that a user enters data to. Upon entering the last data, the user clicks a button to read all the data from the rows in the JTable and puts them in an arraylist. If the user does not click enter or navigates away from the last cell, then after clicking the button it does not read the last cell entered. Since the user is clicking on a button to indicate he is done entering data on the table, does he also have to hit the enter key to indicate he is done entering the data?
The code below is my tablemodelListener:
public class InteractiveTableModelListener implements TableModelListener {
public void tableChanged(TableModelEvent evt) {
if (evt.getType() == TableModelEvent.UPDATE) {
int row = evt.getFirstRow();
System.out.println("Update row:"+" "+row);
jTable1.setRowSelectionInterval(row, row);
}

Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
In the future, Swing related questions should be posted in the Swing fourm. (This question has been asked and answered dozens of times).
But there is not need to repost because [Table Stop Editing|http://www.camick.com/java/blog.html?name=table-stop-editing] explains whats happening and give a couple of solutions.

Can I use Acrobat 11to download pdf that only allows me to read, enter data, and print?

I need to complete gov. forms available online as pdf. I can review, enter data and print, but I cannot save to my computer or anywhere else. I need to be able to save so I can return to the form and enter information as I access it. Can this be done if I purchase Acrobat 11 and, if so, can I get the Standard edition? I currently only have Reader.

Yes, if you upgrade to at least Acrobat Standard you will be able to save. Since you can't save with Reader (assuming 11), the forms are probably XFA forms (created with LiveCycle Designer), which must be Reader-enabled in order to be saved with Reader. Reader 11 can save non-enabled AcroForms (forms created with Acrobat), but not non-enabled XFA forms. If you have a Reader version prior to 11, try using Reader 11 to see if it will save.
If you can provide a link to one of the forms, I can tell you for sure what the minimum requirement for saving is.

Save and refresh after entering data inoto table ( update)

hello guys,
im using abap webdynpro now. and im facing a problem with the saving and update " refresh function"
I have entry table and some other text input.
the thing im doing is to enter data in the filed, attachment, drop down selection. then the data will be saved into the table in the same page
and need to refresh the page automaticlly when doing this. so the used does not have to do it manully
please help me in this..code, source, or hints.
Thanks
Lily

thanks Manas Dua
I could do that, but this is going to be problem with performance side.
I want a method or something to make it easier, faster too
please help me in code or something if that possible.
Regards
Lily

Save and refresh after entering data inoto table.

hello guys,
im using abap webdynpro now. and im facing a problem with the saving and update " refresh function"
I have entry table and some other text input.
the thing im doing is to enter data in the filed, attachment, drop down selection. then the data will be saved into the table in the same page
and need to refresh the page automaticlly when doing this. so the used does not have to do it manully
please help me in this..code, source, or hints.
Thanks
Lily

well , the guys guid me to some ideas.
yes..after entering data into filed, textinput. the data will goes to the table after clicking " save" button. after that I want the table to be updated.
thanks

Restrict Which Users Can Enter Data In List Form in SharePoint Foundation 2013

Is there a way to restrict which users can enter data in particular fields in a list item entry form?
We are using a SharePoint Foundation 2013 list and calendar to manage vacation time. We need to restrict non-supervisor users users from entering a value in a certain field in the vacation request form.
Here is how the system works now:
1. Employees complete the vacation request form (which creates a list item)
2. An email is sent to their supervisor to either approve or decline the request
3. Approved requests are automatically entered onto the vacation calendar
We have restricted the list so that only supervisors can edit items (the pending vacation requests). The problem is that all users can mark their own requests as approved when they fill out the request form in the first place. Is there a way to restrict
which users can enter data in particular fields on a list item entry form?

Thanks for the suggestion. We ended up 1) hiding the approval column and 2) creating a second list, workflow, etc. The user no longer sees the approval column when filling out the form. Requests are now submitted to list A. Workflow #1 copies the request
to List B, then deletes the item from List A. Once the request is added to List B, Workflow #2 emails the user that the request has been received and emails the supervisor that a request needs to be approved. Only supervisors have editing permissions on List
B. Approved requests are automatically added to the vacation calendar (the calendar view of List B).
We found the following site to be helpful in learning how to hide the list column:
http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2013/06/03/how-to-hide-a-sharepoint-list-column-from-a-list-form.aspx

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

How can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?

Hello, all,
how can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
E.g. I want to implement a top-down-planning scenario and I have the following hierarchy:
Europe
     Germany
     France
     UK
     Spain
     Italy
How can I enter a value on Europe in an input schedule in order to allocate this value afterwards?
Thanks in advance and best regards
Gerd

Gerd,
It should be something like below -
EuropeInput
Europe
     Germany
     France
     UK
     Spain
     Italy
EuropeInput shall be kept out of hierarchy and should be a base level member. Users will enter the numbers in this member. In your script logic, you will make use of this member to allocate the data in Bas(Europe) i.e. Germany, France, etc.
Effectively, after allocation the same data will be rolled up to Europe.
Many top-down planning would use such work-around as BPC doesn't allow writing to parent node.
Regards,
Ashish

How can I get user to enter date & time on a form?

I have a form where I want the user to enter a date and time for an event. The database field is in MYSQL datetime format
I've used the datepicker on the form field but it only allows for a date entry not time.(eeven when seetin the width to 22 chars
I remember doing something before which allowed the user to pick a date and then add the time at the end.
I've got the date defaulted to dd/mm/yyyy and the time to H:mm in the control panel.
Can anyone help please or is there a better way to enter date and time?.
Any help appreciated
Thanks
Clive

Two things:
The column in your database is defined as DateTime, not Date
You use the option on the Date Picker to choose datetime, not date
This will give the user the ability to choose a date and time from the date column. If you need more control over the time, you probably need to add another column defined as Time. Then you can use the validation rules to force an entry rather than allowing the default (current time).

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

Basic question .... How can I set up a page for visitors to enter data?

Is it possible in iWeb 08 to set up a page that visitors enter data in specific fields and allow me to retrieve that information? Like filling out a form, then emailing the form to my .mac mail.
Thanks.

Yes Douglas you can set up a form that collects information. Use an html snippet and get the form code from such places as
Wufoo.com
Formlogix.com
Createforms.com
bravenet.com
and others you may find by googling it.
Mireille

Enter data in a form - save that data to disk...

I've got a form application which has typical fields for data entry, ref number, name, address etc.....up to ten items.
I have a Main Menu form, four other forms, and can move between them fine.
This is a cut down example, with only one text field, of the type of form I'm using to enter data to:
package Test;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import com.borland.jbcl.control.*;
public class Frame1 extends JFrame {
Button button1 = new Button();
Label label1 = new Label();
TextField textField1 = new TextField();
Filer filer1 = new Filer();
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
button1.setBounds(new Rectangle(136, 202, 133, 45));
button1.setLabel("a button");
button1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button1_actionPerformed(e);
this.getContentPane().setLayout(null);
this.setSize(new Dimension(400, 300));
this.setTitle("Form Test");
label1.setBounds(new Rectangle(18, 10, 111, 37));
label1.setAlignment(2);
label1.setText("a text field");
textField1.setBounds(new Rectangle(166, 13, 109, 23));
textField1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
filer1.setDirectory("c:\\");
filer1.setFrame(this);
this.getContentPane().add(label1, null);
this.getContentPane().add(textField1, null);
this.getContentPane().add(button1, null);
//Overridden so we can exit on System Close
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if(e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void button1_actionPerformed(ActionEvent e) {
Frame2 myFrame = new Frame2();
myFrame.show();
I'd like to be able to enter the data, save individual records to disk, and access them individually. I've been trying to implement
'Serialize' but with no success so far. I'd be most grateful for any advice on how to save the individual records without implementing a database. I'm using applications for all the forms. To get me started, I'd be happy just to be able to enter something in the example form's text field, save it, and display it again.
Many Thanks

Though it would be better with ODBC bridge to an access DB.
... ( <--- that's dot, dot, dot) though for some reason you don't want to go down the DB path ?!?!

Enter data in TEB

Similar Messages

Maybe you are looking for