Enterprise Solution for communication??

Hi,
We need to transfer pdf files between various environments(AS/400, WIN2K, AIX etc) with detail information about pdf files. Reciever will recieve the pdf file along with the details and populate that information into their database. reciever will have their own APIs to handle this. But we are looking for enterprise solution for communicating between these environments.
Please give pros and cons in various technologies like JMS, SOAP, HTTP, etc..
Thank you,

You dont need to 'send' your report to the other environments, you are merely accessing the report from a shared file system.
NFS allows you to share a common file system which might be located on one your existing systems. Or you can purchase an additional file server.
NFS is quite open, and I believe supports all the systems you have. Finding NFS client software should be easy, with Windows probably the most complex. Several vendors (Hummingbird is the most notable with NFS Maestro) provides Windows based NFS clients.
Once finished with the server and client architecture, design a file tree that supports staging and releasing the docs.
for example
/var/pdfdocs
/release
/staging
NFS is very quick, and allows you to use standard file commands.
The meta-data is stored in a standard relational db, which each system can update as sees fit.
Read the following:
NFS in general
http://www.networkcomputing.com/912/912buyers2.html
NFS on AS/400
http://publib-b.boulder.ibm.com/Redbooks.nsf/RedbookAbstracts/sg242158.html?Open
Windows NFS
http://www.hummingbird.com/products/nc/nfs/index.html
http://www.frontiertech.com/supernfs/product/prodguid.htm

Similar Messages

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

Enterprise solution for Mobile phones using Wi-Fi

Hi All,
Not sure if this is the right forum.
We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
We recently bought a lot of APs ie AIR-CAP3502I-N-K9 + WLC and start deploys wireless around our building for data.
Just wondering what alternative solutions or software we can use so we can somehow get our users' mobile to work.
Thanks
QL

We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
The Future of Hotspots: Making Wi-Fi as Secure and Easy to Use as Cellular
Configuring Mobile Concierge
If I read correctly, Cisco has started implementing 802.11u with the soon-to-be-release WLC firmware code 7.3.X called Mobile Concierge.
I am not sure about how to get this running but I hope this two links I've posted will get you to work.
Unfortunately, I am also not sure how mobile phone carriers will like this if mobile phones will go to an Enterprise wifi instead of their own network.

I want to find any backup and recovery solution for SharePoint server 2013 enterprise

Dear Expertise,
Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?
KF

Hi,
According to your post, my understanding is that you wanted to know some backup and restore solution for SharePoint 2013.
There are two Technet articles about the backup and restore, you can have a look at them.
http://technet.microsoft.com/en-us/library/ee428315(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee662536(v=office.15).aspx
You can also use some third-part software tools to achieve the same scenario.
http://www.avepoint.com/products/sharepoint-infrastructure-management/data-protection/
http://www.sharepointreviews.com/sharepoint-reviews-articles/sharepoint-administration/254-sharepoint-backup-recovery-evaluation
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Providing DRC solution for ATMs in the enterprise network

Hi all,
I am looking for ideas on how to provide a Disaster Recovery solution for thousands of ATMs (Automated Teller Machine) deployed in the bank enterprise network. The solution should consider
the following facts:-
1.- Having the ATMs switch the connection to the Server at DRC shouldn't be automatic. This situation might last for the next few years until DRC becomes mirror image of primary data center.
2.- The ATM servers at the primary and disaster recovery center is single server equipped with high availability (Tandem). I mean to say, there is no SLBs invloved in the connection
3.- The application running on the ATMs is calling the ATM Server by hardcoded IP address in the application. The bank is willing to visit the ATMs to change once and forever.
I see source natting as the most appropriate solution, however your opanion and expertise are appreciated.
Thanks
Sami

Sami,
what kind of solution are you looking for ?
Is the concern the connection from ATM to central location ?
Or is it a concern about the server at the central location ?
For connection issues, I don't see any other solution than providing multiple lines.
If the concern is the single server, you could have a loadbalancer somewhere in your network.
The loadbalancer can use probes to check the health of the server.
If the primary fails, or is unreachable, you can automatically redirect the traffic to the standby.
ATM machines will point to the virtual ip (you could reuse the current ip and assign a new one to the servers).
Not sure where to place the loadbalancer without a better idea of the problem to solve and the network.
Gilles.

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

Patch management solution for Mac software?

Does anyone know of a solution to managing the update/patching of Mac software other than the Mac App Store for home users? I know there are enterprise solutions, but I am looking for something that is comparable to Secunia PSI.

That is not my experience with Secunia PSI. It is an excellent home utility for Windows systems to keep the latest security patches applied to more than just the Microsoft products. And by "more", I mean every product that I have ever loaded on a Windows computer.
I am happy that the Mac is not targeted often, but it is targeted. Fixing flaws quickly is important to minimizing the risk of vulnerabilities. Currently, the only product I am aware of that does this is Mackeeper, which the community here has derided because of the aggresive tactics that vendor takes to sell the product and the general sense that Macs dont need any utility software because of a few cleanup scripts that Apple runs automatically.
I dont agree with agressive sales, but I also do not agree that Macs have no need for security software
Macs are great computers, but they are not flawless systems. (http://web.nvd.nist.gov/view/vuln/search-results?query=mac_os_x) Maybe more products for the Mac will go to App store distribution, which will greatly simplify updates, but I am not holding my breath for all the applications that I use.

What are SaaS solutions for email?

What are the SaaS solutions for email?

Hi,
Software as a Service (SaaS) makes use of a cloud computing infrastructure to deliver one application to many users, regardless of their location, rather than the traditional model of one application per desktop.
Here are two related articles which can help you to understand the SaaS for your reference.
Software as a Service
http://www.microsoft.com/industry/government/guides/cloud_computing/4-SaaS.aspx
Software as a Service (SaaS): An Enterprise Perspective
http://msdn.microsoft.com/en-us/library/aa905332.aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Is there a solution for Higher Ed Computer Labs?

I am an instructional Technician for the Photography Department at a Community College. We currently purchase and use the Creative Suite 6 Design & Web Premium here in the Photography, Graphics and Journalism departments. We have over 150 Macintosh computers licensed with your product and we are very interested in the Creative Cloud.
Currently we purchase the licenses for all of our student and faculty computers, we are hoping that you will be developing an education solution for computer labs like ours.
What we would like to see is an arrangement that would allow our students to subscribe to the Creative Cloud for a three-month period that would be paid for prior to the first day of classes. This would avoid classroom disruptions from students failing to pay if the subscription was on a month-to-month basis.
While I understand that the current Student and Teacher edition at $19.95 is a limited promotion, a price of $20–$25 per month or $75 for a three-month period would be less than the cost of a textbook and could be easily charged as a class fee.
A potential problem is that students sometimes do not use the same computer all the time. If students are taking multiple classes in different labs, they need to be able to access the programs on several computers. I am currently subscribed to the free trial month and my impression is that the subscription is dependent on logging in with an Adobe ID. If this is the case, students should be able to use this log in to access the software they need on whatever computer they are at as long as they have an active (paid) login, and are not logged in on another computer.
As it is everywhere in education, our program budgets are tight. The Creative Cloud would allow us to save a significant amount of funds while still offering the most current technology to our students and faculty. The ability to access any software we need and allowing students the ability to access the programs at school and at home will empower both our faculty and students. Additionally, the availability of cloud storage will allow students to work on files at home and at school seamlessly.
I am making several assumptions:
Pricing –
Student and faculty pricing will be available.
A price will be established for a three-month period to facilitate a college semester.
Access –
Students will be able to access the programs on more than one lab computer.
Is access controlled by logging in with an Adobe ID?
Once the software has been installed on a computer, will any student with an Adobe ID be able to access it?
We are hoping to be able to implement this by next fall, so I am anticipating that these details will be worked out before then.

Great to know this I will be sharing it with my professors also. To have the "team" version would be great! Many problems occur for students with portable storage units. The worst is forgetting to download a project and take it with you. which really hurts our timing on a project to completion. Also as the projects grow in size we can end up with storage issues as some files are very large. This sounds like a grand solution.
Thank you for answering my question earlier Mr. Rice. Now I need to get back to my assignments. bye.

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

Hi,
I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
error. No other errors were there other than that.
Error
Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
method suitable for an entry point.
C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC Blog_Reader
But I found the solution while I fixing it.
Solution for that is like below.
Go to your App.Xaml and Right-Click thenGo to Properties
Check whether the Build Action is
ApplicationDefinition
If not change it to ApplicationDefinition.
Clean the code (solution) and Deploy
Now the error is fiexed.

Hi Robana,
Good sharing on the Technet.
This will definitely benefit other who may encounter the same issue as yours.
Thanks for your sharing again.
Kate Li
TechNet Community Support

SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database

Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Steve

for always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!

What is the best free backup solution for Hyper-V R2/2012? CSV support is necessary

Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.

Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.
Any Altaro Hyper-V Backup User?

Solution Manager vs Enterprise Solution Manager

Dear All,
We already have solution manager installed in our SAP System landscape.
But a visiting consultant give a new word to managers about enterprise solution manager with following benefits.
1-If we have enterprise solution manager then SAP AG can access our system and inform us about system health.
2-If we have enterprise solution manager then SAP AG will react on our ticket not on what we send but on the the actual actual condition of system.
3-We can only utilize our support services in a right way if we have enterprise solution manager.
1- Now first where I can check that the installed solution manager is standard or enterprise?
2- The benefit which is listed above is really available in enterprise solution manager?
3- Any tutorial or link defining how to install and configure enterprise solution manager.
Any response will be highly appreciated
regards,
Syed Saifuddin
SAP BASIS Administrator

Dear Paul
Following is the current Status of our Solution Manager
S / W Comp / Rels           / Level           / Highest support Package / Short Desc of Software Component
SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
SAP_BW     700     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP     700     0007     SAPKNA7007     SAP Application Platform
BBPCRM     500     0007     SAPKU50007     BBPCRM
CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST     400     0010     SAPKITL420     SAP Solution Manager Tool
ST-A/PI     01J_CRM500     0000          -     Application Servicetools for CRM 500 / 5
ST-ICO     150_700     0005     SAPK-15075INSTPL     SAP Solution Manager Implementation Cont
ST-SER     700_2006_1     0003     SAPKITLOG3     SAP Solution Manager Service Tools
Bachup Solution I will manage with Tivoli Storage Manager.
But give me a path to upgrade my Solution Manager to EHP1 or Solution Manager Enterprise Edition.
regards
Syed Saifuddin

Enterprise Solution for communication??

Similar Messages

Maybe you are looking for