Entries in clustering log for DFSR checkpoints

Hi,
I am looking through our cluster logs trying to rule out errors and I notice a repeat instance of this error for all of the cluster disks every 5 minutes:
ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 80
This seems to be related to other behavior happening at the same time related to DFSR. What I think is happening is that DFSR resource is checking the validity of the path on each physical disk until it finds the one the replicated folder is on (the last
entry) and then tries to create the checkpoint file which already exists. Does anyone know why it keeps scanning through all the disks and not just the relevant disk? Also is there a way to stop it spamming the log with this information every 5 minutes if
it is normal behaviour? This is happening on all our nodes and resource groups with DFSR configured.
Note I have truncated the GUIDs:
00001924.00003fb4::2014/12/16-05:06:00.769 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001924.00003fb4::2014/12/16-05:06:00.769 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 117.
00000804.000073e4::2014/12/16-05:06:00.769 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 117 returned 161.
00003738.000048e8::2014/12/16-05:06:00.769 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00003738.000048e8::2014/12/16-05:06:00.769 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 77.
00000804.000073e4::2014/12/16-05:06:00.769 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 77 returned 161.
000036fc.000042c8::2014/12/16-05:06:00.785 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000036fc.000042c8::2014/12/16-05:06:00.785 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 76.
00000804.000073e4::2014/12/16-05:06:00.785 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 76 returned 161.
000038d4.00001d54::2014/12/16-05:06:00.785 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000038d4.00001d54::2014/12/16-05:06:00.785 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 80.
00000804.000073e4::2014/12/16-05:06:00.785 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 80 returned 161.
00001bb8.000050d8::2014/12/16-05:06:00.785 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001bb8.000050d8::2014/12/16-05:06:00.785 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 16.
00000804.000073e4::2014/12/16-05:06:00.785 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 16 returned 161.
00001aec.00001658::2014/12/16-05:06:00.800 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001aec.00001658::2014/12/16-05:06:00.800 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 14.
00000804.000073e4::2014/12/16-05:06:00.800 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 14 returned 161.
000038fc.00003508::2014/12/16-05:06:00.800 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000038fc.00003508::2014/12/16-05:06:00.800 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 81.
00000804.000073e4::2014/12/16-05:06:00.800 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 81 returned 161.
00001884.00002120::2014/12/16-05:06:00.800 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001884.00002120::2014/12/16-05:06:00.800 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 116.
00000804.000073e4::2014/12/16-05:06:00.800 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 116 returned 161.
000037d8.00005ed4::2014/12/16-05:06:00.816 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000037d8.00005ed4::2014/12/16-05:06:00.816 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 78.
00000804.000073e4::2014/12/16-05:06:00.816 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 78 returned 161.
00001b90.00007524::2014/12/16-05:06:00.816 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001b90.00007524::2014/12/16-05:06:00.816 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 15.
00000804.000073e4::2014/12/16-05:06:00.816 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 15 returned 161.
000019f0.00001b84::2014/12/16-05:06:00.816 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000019f0.00001b84::2014/12/16-05:06:00.816 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 119.
00000804.000073e4::2014/12/16-05:06:00.816 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 119 returned 161.
000016c0.00001a80::2014/12/16-05:06:00.832 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML can be on the disk
00000804.000073e4::2014/12/16-05:06:00.832 INFO [GUM] Node 11: Processing RequestLock 11:46479
00000804.000025c4::2014/12/16-05:06:00.832 INFO [GUM] Node 11: Processing GrantLock to 11 (sent by 6 gumid: 7595767)
00000804.000073e4::2014/12/16-05:06:01.190 ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_ALREADY_EXISTS(183)' because of 'Key System\CurrentControlSet\Services\DFSR\Parameters\Replication Groups\D0A is already being checkpointed for resource Cluster Disk 111. Key name 603c.'
00000804.000073e4::2014/12/16-05:06:01.190 WARN [RCM] ResourceControl(ADD_REGISTRY_CHECKPOINT) to Cluster Disk 111 returned 183.
00001924.00006330::2014/12/16-05:06:03.499 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001924.00006330::2014/12/16-05:06:03.499 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 117.
00000804.000071d8::2014/12/16-05:06:03.499 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 117 returned 161.
00003738.000072fc::2014/12/16-05:06:03.499 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00003738.000072fc::2014/12/16-05:06:03.499 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 77.
00000804.000071d8::2014/12/16-05:06:03.499 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 77 returned 161.
000036fc.00005464::2014/12/16-05:06:03.515 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000036fc.00005464::2014/12/16-05:06:03.515 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 76.
00000804.000071d8::2014/12/16-05:06:03.515 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 76 returned 161.
000038d4.00005150::2014/12/16-05:06:03.530 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000038d4.00005150::2014/12/16-05:06:03.530 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 80.
00000804.000071d8::2014/12/16-05:06:03.530 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 80 returned 161.
00001bb8.000050d8::2014/12/16-05:06:03.530 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001bb8.000050d8::2014/12/16-05:06:03.530 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 16.
00000804.000071d8::2014/12/16-05:06:03.530 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 16 returned 161.
00001aec.00001658::2014/12/16-05:06:03.530 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001aec.00001658::2014/12/16-05:06:03.530 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 14.
00000804.000071d8::2014/12/16-05:06:03.530 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 14 returned 161.
000038fc.00001498::2014/12/16-05:06:03.546 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000038fc.00001498::2014/12/16-05:06:03.546 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 81.
00000804.000071d8::2014/12/16-05:06:03.546 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 81 returned 161.
00001884.000012fc::2014/12/16-05:06:03.546 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001884.000012fc::2014/12/16-05:06:03.546 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 116.
00000804.000071d8::2014/12/16-05:06:03.546 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 116 returned 161.
000037d8.00005ed4::2014/12/16-05:06:03.562 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000037d8.00005ed4::2014/12/16-05:06:03.562 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 78.
00000804.000071d8::2014/12/16-05:06:03.562 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 78 returned 161.
00001b90.000058bc::2014/12/16-05:06:03.562 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
00001b90.000058bc::2014/12/16-05:06:03.562 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 15.
00000804.000071d8::2014/12/16-05:06:03.562 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 15 returned 161.
000019f0.00003558::2014/12/16-05:06:03.562 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML is not on the disk
000019f0.00003558::2014/12/16-05:06:03.562 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 119.
00000804.000071d8::2014/12/16-05:06:03.562 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 119 returned 161.
000016c0.00001a80::2014/12/16-05:06:03.577 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_D0A.XML can be on the disk
00000804.000073e4::2014/12/16-05:06:03.593 ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_ALREADY_EXISTS(183)' because of 'Key System\CurrentControlSet\Services\DFSR\Access Checks\Replication Groups\D0A is already being checkpointed for resource Cluster Disk 111. Key name ca5d2.'
00000804.000073e4::2014/12/16-05:06:03.593 WARN [RCM] ResourceControl(ADD_REGISTRY_CHECKPOINT) to Cluster Disk 111 returned 183.
00001924.00003fb4::2014/12/16-05:06:05.886 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00001924.00003fb4::2014/12/16-05:06:05.886 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 117.
00000804.00001de0::2014/12/16-05:06:05.886 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 117 returned 161.
00003738.000048e8::2014/12/16-05:06:05.886 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00003738.000048e8::2014/12/16-05:06:05.886 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 77.
00000804.00001de0::2014/12/16-05:06:05.902 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 77 returned 161.
000036fc.000042c8::2014/12/16-05:06:05.902 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
000036fc.000042c8::2014/12/16-05:06:05.902 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 76.
00000804.00001de0::2014/12/16-05:06:05.902 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 76 returned 161.
000038d4.00001d54::2014/12/16-05:06:05.902 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
000038d4.00001d54::2014/12/16-05:06:05.902 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 80.
00000804.00001de0::2014/12/16-05:06:05.902 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 80 returned 161.
00001bb8.000050d8::2014/12/16-05:06:05.917 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00001bb8.000050d8::2014/12/16-05:06:05.917 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 16.
00000804.00001de0::2014/12/16-05:06:05.917 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 16 returned 161.
00001aec.00007554::2014/12/16-05:06:05.917 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00001aec.00007554::2014/12/16-05:06:05.917 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 14.
00000804.00001de0::2014/12/16-05:06:05.917 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 14 returned 161.
000038fc.00003508::2014/12/16-05:06:05.933 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
000038fc.00003508::2014/12/16-05:06:05.933 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 81.
00000804.00001de0::2014/12/16-05:06:05.933 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 81 returned 161.
00001884.000012fc::2014/12/16-05:06:05.933 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00001884.000012fc::2014/12/16-05:06:05.933 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 116.
00000804.00001de0::2014/12/16-05:06:05.933 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 116 returned 161.
000037d8.00005ed4::2014/12/16-05:06:05.933 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
000037d8.00005ed4::2014/12/16-05:06:05.933 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 78.
00000804.00001de0::2014/12/16-05:06:05.933 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 78 returned 161.
00001b90.00007524::2014/12/16-05:06:05.949 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
00001b90.00007524::2014/12/16-05:06:05.949 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 15.
00000804.00001de0::2014/12/16-05:06:05.949 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 15 returned 161.
000019f0.00003558::2014/12/16-05:06:05.949 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML is not on the disk
000019f0.00003558::2014/12/16-05:06:05.949 ERR [RHS] Error 161 from ResourceControl for resource Cluster Disk 119.
00000804.000071d8::2014/12/16-05:06:05.949 WARN [RCM] ResourceControl(STORAGE_IS_PATH_VALID) to Cluster Disk 119 returned 161.
000016c0.000006e4::2014/12/16-05:06:05.964 INFO [RES] Physical Disk: Path \\?\Volume{e377}\System Volume Information\DFSR\Config\Replica_e377.XML can be on the disk
00000804.00001de0::2014/12/16-05:06:05.980 ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_ALREADY_EXISTS(183)' because of 'Key System\CurrentControlSet\Services\DFSR\Parameters\Volumes\e377 is already being checkpointed for resource Cluster Disk 111. Key name fedc.'
00000804.00001de0::2014/12/16-05:06:05.980 WARN [RCM] ResourceControl(ADD_REGISTRY_CHECKPOINT) to Cluster Disk 111 returned 183.

Hi DH84,
Please offer us more information about your current cluster configuration, such as the event cluster occur, the server edition,
please disable RSS, TCP Chimney on both cluster nodes RSS, NetDMA to narrow down the issue first.
If you are using 2008R2 cluster please confirm you have installed the following hotfix,
Slow failover operation if no router exists between the cluster and an application server
http://support.microsoft.com/kb/2582281
A transient communication failure causes a Windows Server 2008 R2 failover cluster to stop working
http://support.microsoft.com/kb/2550886
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Not getting entry in error logs for SP2

Hi All,
I am using SP2 on Solaris 5.9. I got the below entry in the access logs.
75.187.38.17 - - [05/Dec/2007:00:25:07 -0500] "POST /test/testmac.htmlPOST " 400 147
74.197.120.159 - - [05/Dec/2007:00:26:02 -0500] "" 400 147
76.118.146.74 - - [05/Dec/2007:00:29:27 -0500] "" 400 147
66.159.193.19 - - [05/Dec/2007:00:31:17 -0500] "" 400 147
As it is visible that request resulted 400 response code, but I don't see any entry in the error logs.
Do I need to enable something for this in magnus.conf ?
At present for errors I have the following settings in the magnus.conf as
ErrorLog /data/servers/dir/logs/errors.
Any help would be highly appreciated.
Thanks and regards
-A

400 bad requests are not logged in error logs. That usually means the request sent is malformed.
According to RFC http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
"10.4.1 400 Bad Request
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. "
Try attaching ssltap in between web server and browser and see what request was sent to the server.
$/usr/sfw/bin/ssltap -h
SSLTAP (C) 1997, 1998 Netscape Communications Corporation.
Usage: ssltap [-vhfsxl] [-p port] hostname:port
-v [prints version string]
-h [outputs hex instead of ASCII]
-f [turn on Fancy HTML coloring]
-s [turn on SSL decoding]
-x [turn on extra SSL hex dumps]
-p port [specify rendezvous port (default 1924)]
-l [loop - continue to wait for more connections]
$ssltap -l -p 1924 wshostname:wsport
send browser's request to 1924.
"[05/Dec/2007:08:54:37] failure (16852): Connection queue full, closing socket"
This error message means that server is under heavy load and connection queue is full. Try tweaking
MaxKeepAliveConnections and ConnQueueSize parameters in magnus.conf.
For more info refer :
Sun ONE Web Server 6.1 Performance Tuning, Sizing, and Scaling Guide
http://docs.sun.com/source/817-1836-10/index.html
P/S WS 6.1 SP2 is quite old try switching to Web Server 6.1 sp8 or Web Server 7.0 update 1.
Edited by: mv on Dec 5, 2007 2:16 PM

What does this log entry mean - Cancel initiated for Exchange Producer

Is there anybody who can tell me what could this log entry mean:
--Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange*
I'm asking because I have problem. In two physical sources (physical databases) I have two tables TABLE_1 has 60k rows TABLE_2 has 1 row. Next step these tables are "Binary Join" by BI server
so it looks like here:
-------------------- Sending query to database named OBI (id: <<66800621>>):
select T7101.SYMBOL as c1,
T7101.TABLE_1 as c2
from
TABLE_1 T7101 /* TABLE_1_ALIAS */
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Sending query to database named OBI_BACK (id: <<66800638>>):
select T46142.KATEGORIA as c1,
T46142.FIRMANO as c2
from
TABLE_2 T46142
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>>, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3, Row Width = 80 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>> DbGateway Exchange, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800654>> Binary Join, Close Row Count = 0, Row Width = 104 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800582>> Projection, Close Row Count = 0, Row Width = 76 bytes
As you see first is executed select from TABLE_2 (Node: <<66800638>>, Close Row Count = 1) and this is correct number of close row count
next we have
Cancel initiated for Exchange Producer:(for node with SELECT ROM TABLE_2) - and I don't know what that's mean
and after this we have
Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3
And this is incorrect number of CloseRowCount (should be aprox. 60k)
Finally result is wrong because we have no records (inner join by BI Server doesn't work :( )
Thank you for help
Edited by: markog on Mar 3, 2010 2:03 PM

I'm wrestling with getting all of this to work myself.
Can you see the job in XGrid Admin? It sounds as if the job is failing, but I can't be sure. Clicking on the job in XGrid Admin should give you a "play by play" and tell you where it is failing.
My experience has shown me that permissions is the root cause of alot of issues, and I cannot find any clear reference on what permissions the "Podcasts" folder needs to make all of this work.
Following the documentation, the "pcastxgrid" user doesn't actually get assigned any permissions via the file system or Group membership, so I'm not sure how all of this needs to be set.
Hope this helps.

Thread 1 cannot allocate new log, sequence 80064 - Checkpoint not complete

Hi,
from few days we have sometimes this message into alert. I've just try to increase the size of redo log file but without success, have you got any idea?
Thank you.
Wed Jul 30 00:08:05 2014
Beginning log switch checkpoint up to RBA [0x138bd.2.10], SCN: 4473445936
Thread 1 advanced to log sequence 80061 (LGWR switch)
Current log# 1 seq# 80061 mem# 0: F:\ORACLE\PRD\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 80061 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOG_G11M2.DBF
Beginning log switch checkpoint up to RBA [0x138be.2.10], SCN: 4473445939
Thread 1 advanced to log sequence 80062 (LGWR switch)
Current log# 2 seq# 80062 mem# 0: F:\ORACLE\PRD\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 80062 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOG_G12M2.DBF
Beginning log switch checkpoint up to RBA [0x138bf.2.10], SCN: 4473445942
Thread 1 advanced to log sequence 80063 (LGWR switch)
Current log# 3 seq# 80063 mem# 0: F:\ORACLE\PRD\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 80063 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOG_G13M2.DBF
Wed Jul 30 00:08:06 2014
Archived Log entry 80064 added for thread 1 sequence 80061 ID 0x70061a1e dest 1:
Thread 1 cannot allocate new log, sequence 80064
Checkpoint not complete
Wed Jul 30 00:08:06 2014
Archived Log entry 80065 added for thread 1 sequence 80062 ID 0x70061a1e dest 1:
Current log# 3 seq# 80063 mem# 0: F:\ORACLE\PRD\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 80063 mem# 1: F:\ORACLE\PRD\MIRRLOGA\LOG_G13M2.DBF
Wed Jul 30 00:08:08 2014
Archived Log entry 80066 added for thread 1 sequence 80060 ID 0x70061a1e dest 1:
Wed Jul 30 00:08:09 2014
Completed checkpoint up to RBA [0x138bd.2.10], SCN: 4473445936
Beginning log switch checkpoint up to RBA [0x138c0.2.10], SCN: 4473445946
Thread 1 advanced to log sequence 80064 (LGWR switch)
Current log# 4 seq# 80064 mem# 0: F:\ORACLE\PRD\ORIGLOGB\LOG_G14M1.DBF
Completed checkpoint up to RBA [0x138c0.2.10], SCN: 4473445946
Current log# 4 seq# 80064 mem# 1: F:\ORACLE\PRD\MIRRLOGB\LOG_G14M2.DBF
Archived Log entry 80067 added for thread 1 sequence 80063 ID 0x70061a1e dest 1:
Completed checkpoint up to RBA [0x138bf.2.10], SCN: 4473445942
Completed checkpoint up to RBA [0x138be.2.10], SCN: 4473445939

========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Installer di patch provvisorie versione 11.2.0.3.1
Copyright (c) 2012, Oracle Corporation. Tutti i diritti riservati.
Oracle Home       : I:\oracle\PRD\11203
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.3.1
OUI version       : 11.2.0.3.0
Log file location : I:\oracle\PRD\11203\cfgtoollogs\opatch\opatch2014-07-30_00-4
7-57AM_1.log
Lsinventory Output file location : I:\oracle\PRD\11203\cfgtoollogs\opatch\lsinv\
lsinventory2014-07-30_00-47-57AM.txt
Prodotti di livello superiore installati (1):
Oracle Database 11g                                                  11.2.0.3.0
Ci sono 1 prodotti installati in questa Oracle home.
Patch provvisorie (6) :
Patch 16167942     : applied on Sat May 18 11:50:42 CEST 2013
Unique Patch ID: 15646955
Patch description: "ORACLE 11G 11.2.0.3 PATCH 15 BUG FOR WINDOWS (64-BIT AMD64
AND INTEL EM64)"
   Created on 01 Feb 2013, 00:06:51 hrs PST8PDT
   Bugs fixed:
     16167942, 15841373, 14252187, 13877007, 14249514, 13891981, 12637294
     14511876, 14309075, 13736413, 12862170, 13901201, 12819999, 16019955
     15996520, 14775679, 13902963, 15924589, 14525739, 14744263, 12838063
     15910002, 14751895, 14107475, 13262857, 14641969, 15938047, 15982436
     13924173, 14761411, 16042648, 13337530, 14810890, 13605675, 7335665
     12686027, 16011871, 13729351, 13923995, 12813641, 12985237, 14600776
     14565062, 13066936, 14510516, 14192781, 14164191, 14505752, 15834269
     13559463, 14702500, 12345305, 14467027, 14807785, 14590564, 13849733
     13916549, 14755945, 15869211, 13365021, 13972394, 14193629, 14808639
     14189694, 13848402, 14226599, 13621258, 13827380, 14762511, 14064573
     13777449, 15848120, 14546673, 14546638, 14546575, 14469008, 14263073
     14263036, 14258925, 14205448, 14023636, 14035825, 13685544, 14040433
     13593999, 13026410, 12964067, 12873183, 12857027, 12345082, 14589750
     14668670, 13791678, 13769577, 13658087, 14230270, 13890080, 13810393
     13551402, 14644185, 13686047, 12583611, 14488943, 14176879, 13727644
     13517951, 13361350, 14373728, 13602883, 13580513, 10219624, 14645769
     14007968, 14827344, 9153183, 15853081, 14138130, 14168099, 14810093
     13845120, 14277586, 14271305, 13879428, 13938166, 12558569, 10260842
     14569263, 14100232, 13912373, 13653178, 14242977, 14102704, 14001941
     13993634, 13634583, 14828076, 13645875, 14398795, 13879553, 12940620
     14663556, 12327035, 14207902, 12557401, 14653598, 14587310, 14224606
     14577426, 14386985, 13783957, 12656350, 11836374, 14485163, 14624988
     14582487, 14332938, 14166276, 14479390, 14372670, 14038163, 13535104
     13744724, 14245087, 14305767, 14731193, 14313519, 14500723, 12928700
     12571916, 14245825, 13642044, 9706792, 13693929, 13903046, 14581922
     14142884, 14393900, 9778542, 13115786, 13427062, 14164849, 13399711
     11686700, 14175146, 14499293, 13615767, 14625969, 14513934, 14320472
     14613223, 13040943, 12812148, 14360965, 13911821, 14140535, 14204172
     13949042, 14367567, 9949330, 14467202, 14323857, 13834065, 13632653
     14110275, 13549808, 14196818, 13819727, 9751365, 10029609, 11846912
     12646510, 12766337, 12826115, 12860701, 12865360, 12973529, 13031176
     13040909, 13061085, 13066239, 13071375, 13111783, 13114306, 13345188
     13376866, 13393115, 13406688, 13408107, 13433178, 13459147, 13531801
     13553502, 13603792, 13608532, 13622539, 13622968, 13738130, 13961338
     14054189, 13851432, 14063422, 13973307, 14119388, 14282903, 14517263
     13716797, 14465787, 14613900, 14304758, 14251904, 14214257, 14153867
     14009845, 13889047, 13888719, 13820621, 13697828, 12663376, 11675721
     12889329, 13410987, 13965075, 13869978, 13843080, 13825231, 13582411
     13550689, 13023609, 13000491, 10418841, 10317921, 13523527, 13498267
     14096743, 14010695, 13947200, 14259185, 14280458, 14276345, 14543814
     13804294, 13718279, 13612575, 13430938, 13384182, 13377816, 13250244
     12794305, 12693626, 12352406, 12879628, 13534412, 13524698, 13743987
     14207317, 13918644, 14198511, 14088346, 12791981, 13011409, 13038684
     12865902, 12768840, 14076523, 13632809, 14458246, 13359289, 12794025
     9952132, 13780816, 12950694, 14162791, 13093358, 14255600, 13936424
     14301592, 14050233, 13528725, 14500052, 10146616, 14409183, 14324057
     14313389, 5918695, 12430142, 13399435, 13913630, 13732226, 10084752
     13591624, 14237793, 14013094, 10229475, 13078786, 14052474, 13637058
     12646746, 13000553, 14254795, 14215010, 13922729, 13942694, 12898637
     14309390, 13958038, 10214323, 13710236, 14115858, 14240544, 14158332
     13073613, 11074304, 13868705, 12723295, 13853654, 14074606, 13784384
     14386810, 14223718, 14018752, 13258936, 13723052, 12898020, 10625145
     14052871, 13076238, 13992002, 13242070, 12955701, 12693573, 14026888
     13984965, 13366199, 13843286, 13616375, 12839247, 8547978, 13714926
     13023854, 13910420, 11837095, 12842909, 12959852, 13632140, 13780035
     13860201, 13711083, 13628002, 13397104, 12358083, 13743357, 13945708
     10384051, 13591484, 13051250, 13727853, 12959627, 14095820, 5144934
     13657605, 13582702, 12966665, 13463131, 13773133, 12918738, 13099577
     13690409, 13645917, 11708510, 14042380, 13627489, 13652437, 12733042
     13907462, 13608299, 13624984, 9095696, 12794090, 9706532, 13469158
     13947480, 13555112, 13399236, 12910565, 13790109, 12552578, 13896848
     13737746, 13080778, 13458016, 13873885, 12312133, 12731940, 12672969
     13355095, 13981051, 13467683, 13457582, 13370330, 13340388, 12976376
     12797420, 12658411, 10133521, 9761357, 13827394, 13729832, 13851978
     13559770, 13592937, 13592919, 13478856, 13559540, 13641696, 13729808
     13632530, 14100237, 11071989, 13786142, 13839641, 13041324, 13857364
     13853089, 13806545, 13726162, 13657366, 13617861, 13604057, 13483672
     12959140, 12914722, 12910033, 12771830, 13776758, 13339443, 12680491
     10114953, 12966774, 13965211, 12424121, 13478060, 13786778, 13579992
     13705338, 13603613, 13476583, 12745662, 9190186, 13530646, 13520452
     9019231, 13610777, 12905053, 10263668, 13550185, 13385346, 13448206
     12772404, 13911711, 11072246, 13104881, 13863326, 12889054, 13775960
     13777823, 13464002, 11824898, 13535622, 13916709, 12880299, 12918338
     12529945, 13811209, 14058362, 13724808, 13885389, 13649031, 13350245
     13553883, 13388104, 13635347, 13404129, 13031118, 12530140, 13023541
     13767921, 13787482, 13641076, 13807411, 13724992, 12965899, 13791443
     12879027, 13584130, 13495307, 12594032, 13709220, 13247965, 13243072
     13683125, 13652493, 12957127, 10215977, 13014128, 13040331, 12857222
     12977501, 12664456, 12405931, 13525554, 13492863, 13573521, 13873471
     13366268, 13352423, 13460353, 12709476, 13652088, 13886023, 13942723
     12919564, 12894807, 12829021, 12612118, 11063191, 13503598, 13482688
     13354082, 13484963, 13395403, 13542159, 12983611, 13718476, 12846562
     9659614, 13326736, 11846902, 11665727, 13257247, 13588248, 13544396
     13566938, 13615517, 13425727, 13037709, 12730342, 12349553, 13502441
     13258062, 13251796, 13247273, 12659561, 12639013, 12594616, 11772838
     13570057, 12403721, 12585543, 12784549, 12834800, 12975771, 13040171
     13058950, 13063120, 13077335, 13365700, 13382280, 13384397, 13440516
     13454210, 13457537, 13477790, 13496250, 13501787, 13505390, 13506110
     13524899, 13572659, 13594712, 13617627, 13326289, 13555974, 13035360
     13420224, 13419660, 13036331, 13332439, 13420174, 12583826, 13358781
     11883969, 13524237, 12867713, 13328193, 13516727, 11865420, 13502183
     13259364, 13371153, 12998795, 13413168, 12897902, 13044108, 12971242
     12834027, 12620823, 13420516, 12849377, 12975811, 12646784, 12829429
     12538907, 12950823, 12848480, 12823838, 13366202, 13002015, 12834777
     13001901, 13017428, 13082238, 12965049, 11840910, 12656535, 12617123
     13073340, 12925041, 12938841, 13023632, 13066371, 12942119, 11877623
     12810890, 12995950, 12765467, 12934171, 13070939, 12535346, 12985184
     13103913, 12765868, 12622441, 12876314, 12820045, 13038806, 13090686
     12923168, 13362079, 12591252, 12718090, 12873909, 10350832, 12795861
     13039908, 12976590, 13017584, 12627504, 13263435, 12847466, 12797765
     12758736, 12878750, 12861463, 13024624, 12764337, 12662040, 13068077
     12914824, 13074261, 12668341, 12597906, 12932852, 13045518, 12897651
     12960925, 12728585, 13019958, 12902661, 12886827, 12913474, 3522216
     12678920, 12885323, 13334158, 12947871, 12896850, 13001955, 12784559
     12827166, 9703627, 12772345, 12905058, 13345868, 10357727, 12827493
     13004894, 12780983, 12842804, 13146719, 12655301, 12960302, 13085732
     12979199, 12638117, 13357509, 12401111, 12857064, 8631856, 13035804
     13355963, 12845115, 12695029, 12990582, 12971775, 12867511, 12917230
     12582664, 12849688, 12950644, 12588744, 13011520, 12899169, 12823042
Patch 14658090     : applied on Sat May 18 11:40:34 CEST 2013
Unique Patch ID: 15859799.1
   Created on 27 Jan 2013, 08:31:45 hrs PST8PDT
   Bugs fixed:
     14658090
Patch 13575265     : applied on Sat May 18 11:40:14 CEST 2013
Unique Patch ID: 14606745
   Created on 27 Feb 2012, 02:10:47 hrs PST8PDT
   Bugs fixed:
     13575265
Patch 13508485     : applied on Sat May 18 11:39:34 CEST 2013
Unique Patch ID: 14395138
   Created on 21 Dec 2011, 13:23:38 hrs PST8PDT
   Bugs fixed:
     13508485
Patch 12325243     : applied on Sat May 18 11:38:51 CEST 2013
Unique Patch ID: 14243031
   Created on 7 Nov 2011, 11:57:40 hrs PST8PDT
   Bugs fixed:
     12325243
Patch 9584028      : applied on Sat May 18 11:38:31 CEST 2013
   Created on 22 Jun 2012, 11:39:40 hrs CEST
   Bugs fixed:
     9584028
OPatch succeeded.

Is There a Way to Run a Redo log for a Single Tablespace?

I'm still fairly new to Oracle. I've been reading up on the architecture and I am getting the hang of it. Actually, I have 2 questions.
1) My first question is..."Is there a way to run the redo log file...but to specify something so that it only applies to a single tablespace and it's related files?"
So, in a situation where, for some reason, only a single dbf file has become corrupted, I only have to worry about replaying the log for those transactions that affect the tablespace associated with that file.
2) Also, I would like to know if there is a query I can run from iSQLPlus that would allow me to view the datafiles that are associated with a tablespace.
Thanks

1) My first question is..."Is there a way to run the
redo log file...but to specify something so that it
only applies to a single tablespace and it's related
files?"
No You can't specify a redolog file to record the transaction entries for a particular tablespace.
In cas if a file gets corrupted.you need to apply all the archivelogs since the last backup plus the redologs to bring back the DB to consistent state.
>
2) Also, I would like to know if there is a query I
can run from iSQLPlus that would allow me to view the
datafiles that are associated with a tablespace.Select file_name,tablespace_name from dba_data_files will give you the
The above will give you the number of datafiles that a tablespace is made of.
In your case you have created the tablespace iwth one datafile.
Message was edited by:
Maran.E

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to check and delete the change logs for DSO

Hello All,
I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
Thanks,
M

Hi
Check out the below two articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

ORA-00205: error in identifying control file, check alert log for more info

Hi
I'm creating a database manually,
I am hitting with the following error :
SQL> startup mount
ORACLE instance started.
Total System Global Area 150667264 bytes
Fixed Size 1335080 bytes
Variable Size 92274904 bytes
Database Buffers 50331648 bytes
Redo Buffers 6725632 bytes
ORA-00205: error in identifying control file, check alert log for more info
Following is the entry in init.ora
control_files='/u01/oracle/db/oradata/testdb/control01.ctl','/u01/oracle/db/oradata/testdb/control02.ctl'
and this the owner priviliges of /u01/oracle/db/oradata/testdb directory
drwxrwx--- 2 oracle dba 4096 Oct 10 12:16 testdb

Found in $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace/alert/log.xml
ORA-00210: cannot open the specified control fileORA-00202: control file: '/u01/oracle/db/oradata/testdb/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/oracle/db/oradata/testdb/control01.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3

Entries in CDS.log file and Org Chart Link

Hello Gurus/Luke/Stephen:
I have a live SAP connection for Org Chart 3.0 (build 5.1.32.1) for Nakisa 2.0. I have correct entries in backend R/3 system and I have right entries in Nakisa (through Admin Console). I have also done HR-OCI configuration. Still I am not able to launch OrgChart - it gives following error "Cannot find the root of OrgChart. The OrgChart box may have been deleted or incorrectly specified". Please find following entries from CDS.log file from server:
( 10/20/2009 11:10 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/20/2009 11:11 PM:     ERROR: Rfc_Read_Table : Source {Nakisa.SAP.Proxy}: Message {[SAPConnector.Open]: Password logon no longer possible - too many failed attempts}
10/20/2009 11:11 PM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/20/2009 11:11 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts')
I do have correct password, so I am not sure what is the issue. Please advise.
Thanks,
Jha

Here are more errors from CDS.log file:
10/22/2009 12:47 AM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/22/2009 12:47 AM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: DirectoryListing1 does not exist.
Thanks,
jha

Change log for CRM service order

Dear Experts,
I've created log profile in CRM under IMG path Customer Relationship Management->Basic Functions-> Change log with protocolo " Changed document " & segment " PRICING_I ". This log profile is attached to transaction type service order.
Basic idea is to capture the changes made on the pricing in service order. Now with this setup where can i see the trace of changes done in service order. Is there any table that fills with the log ?
Basically i'm trying to find log DB table for pricing with this setup.Can anyone pls suggest me to resolve the issue.
Regards
Devika.S

Hi,
there are no change logs for CUMULAT_H object because this is only a temporary object in CRM Order buffer. Check for example the function module CRM_CUMULAT_H_READ_OB. You will find out the this module does not read the CUMULATE_H from the DB cumulates the values by reading the item values. Because of that you will also see that in view CRMV_OBJECTS the change document relevance is not maintained for this object.
So you will not a change entry for CUMULAT_H in CDHDR/CDPOS. As a workaround for your requirement you can read the changes of CRMD_PRICING_I-NET_VALUE from the change document tables or write a change entry on save into a customer field and/or table.
Regards
Nicolai

No entry in table T512W for key 40 9913

Dear Guru
When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
9913 is the wage type which is getting updated due to INCS rule.
In the log, 9913 value is same as value of EDLI Contribution
/3F7 EDLI contri0101 32.50
9913 0101 32.50
I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
Regards
Vikas K Sharma

Hi
I checked the customized WT entry table and there is no 9 series WT at all.
Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
Please guide.
Regards
Vikas K Sharma

No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.

I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
John

I believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts

MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more...

Ingo,
I am getting below error message in BO Test environment when I refresh WebI document.
MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details
It was working when we migrated the objects initially. Subsequently when we try to refresh WebI document we are getting the above error message. It still works in BO Dev environment and the no of records are the same in Dev and Test.
I am able run the underlying BEx query in SAP BW Test environment and it does return data.
I checked ST22 and SM21 log, but no details there.
Is it related to Authorization on the Universe or Bex Query?
We are in the middle of UAT and not able to move forward. I would greatly appreciate your input.
Thanks
Ram

Ingo,
I ran the zip file and added the required entries to registry.
And then I tried to reproduce the error, but the files are not generated instead I noticeed below error message on the server:
The description for Event ID ( 7939 ) in Source ( Crystal OLAP Client ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Registry Access Error: , [HKEY_LOCAL_MACHINE]Software\Business Objects\Suite 12.0\MDA\Log\Modules: The system cannot find the file specified..
Does tha t mean we do not have permissons to read the registry?
I would greatly appreciate your input.
Thanks in advance.
Ram

Change Log for Custom fields

Hi All,
I need the change log for custom fields added in BP transaction codes.
Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
Please let us know if iam missing any other thing?

Hi Amit Singh,
Apart from clicking the checkbox in dataelement...
There are some settings need to be done by BASIS
and some settings and entries should be made in SCOD t-code
create entriy for change document here..
also hv a look on below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
Custom Table values in CDPOS and CDHDR
scdo
wat do these fields in scdo stand for?
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Thread 1 cannot allocate new log, sequence 714 - Checkpoint not complete

I'm working in a Oracle 10g database, running on RHEL. The alert_*.log file is putting out this type of text for the past few months:
Thread 1 advanced to log sequence 713 (LGWR Switch)
Current log#2 seq# 713 mem# 0: /dbfiles/..../onlinelog/filename.log
Current log #2 ..........
Thread 1 cannot allocate new log, sequence 714
Checkpoint not complete
Any ideas to get me pointed in the right direction is appreciated,
Thank you in advance,
Wes

The immediate fixes Vishal suggests are the standard answer, but there is more to it, as the MOS doc he references shows. Additional questions I would ask:
How long is the delay between the inability to switch and when it actually switches? How many datafiles do you have? What is waiting in the db?
In general, I find making log files sized for the rare massive updates, then using the built-in timeouts to switch every 20 or 30 minutes (depending on management recoverability expectations), helps avoid some of these problems. More specifically, run a statspack or awr (if licensed) report for maybe an hour during heavy times, and see what it thinks the waits are. Tuning is an iterative process, and sometimes different things can cause similar symptoms. Sometimes fixing the biggest problem (which is often poor SQL) can radically change the symptoms observed. Other times you find you have dying hardware, or someone messed up a switch configuration.

Entries in clustering log for DFSR checkpoints

Similar Messages

Maybe you are looking for