EPCF Workprotect Pop up Unsaved Data Changes

The SAP delivered pop up Workprotect has three radio button options:
1.Continue with navigation and open new window
2.Go back to your page and save data
3.Discard changes and open content in same window.
Now Portal defaults to 1. My client wants it to default to 3. Is there a process in place with the help of which I can customize the com.sap.portal.epcf.admin.WorkProtectPopup.
Any help appreciated.
Regards
Mike

I dont see a straight forward to do that.
However, you could edit the dirty.jsp inside the com.sap.portal.epcf.loader.par file to suit your requirement and redeploy it again. Just be reminded that with an upgrade this will go off and you might have to do it again.
Its upto you to weigh and decide whether the effort justifies the end.
Pradeep.

Similar Messages

How to enable workprotect mode for unsaved data

Hi,
I am trying to enable workprotect mode for unsaved data and the reason is after entering hours in Record Working Time If the user navigates to other screen ,all the data entered in time is getting lost.
For enabling the Workprotect mode I did the following things
1.Go to system admin -> system config ->service config->Applicaitons ->com.sap.portal.epcf.loader
Change workprotect.mode.default to 2
Restart the config by right clicking on com.sap.portal.epcf.loader . Click Administrate ->restart
and
2.Opened the Personalise option from Masthead and selected workprotect mode and selected
Choose action in popup on unsaved data
But still it doesn't work.
What is missing here
Thanks
Bala Duvvuri

GLM,
I am testing with my own user id and i have set the settings as mentioned above
Thanks
Bala Duvvuri

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

Customize the message of workprotect pop up

Hi,
Is there a way to customize the message of workprotect feature pop up, which notifies the user about unsaved data and allows to take proper action?

Hi,
Its not possible currently.
I order to change it there is a need to open a par file (epfcadmin) and change the text there, then redeploy it to the portal, but it is not recommended.
Regards,
Tal.

Catching ALV Data changed or not

HI All,
In my component I have one alv component .
First user changes some data in the component and then presses the button in FPM.
After pressing the button a pop up appears .
Requirement is to check whether any unsaved data is present or not .
If unsave data present then Pop should appear else not.
Now here how to catch whether data has been changed or not.
In modify view while am trying to acces the node its automatically changing to the new value.

Hi,
may be you can use Context Change Log (Recording User Entries) concept.
See http://help.sap.com/saphelp_scm50/helpdata/en/ae/f95e42ff93c153e10000000a1550b0/content.htm
Thanks,
Chandra

Confirm Dialog on Closing Web Application with unsaved data?

Hi all,
I am searching for best-practices or official solutions for implementing the following functionalty:
User is trying to close the browser window or tab (Mozilla Firefox) by hitting the "X". We need to ask him if he is sure cause there might be unsaved data.
The only solution we now see is the following:
- event "onbeforeunlad":
window.onbeforeunload = function (oEvent) {
oEvent.returnValue = 'Sure? Unchanged data might be lost'
Problem is that this event also runs, when youre navigating in the analysis item, e.g. expanding a hierarchy. You have to switch it of for every single Item with onmouseover and switch it on again later.
And further on: It still has to be bound to the data... if data hasn't changed, it shouldnt pop up.
Question: Are there any official suggestions from SAP? Seems to be a standard requirement. If not, do you know any better solutions for implementing this functionality?
Thanks in advance for your help,
Michael

try capturing the onBeforeUnload event and display a modal confirmation dialog asking the user if he really wants to navigate away from the page; and warning him that if he does so, all the changes he made hitherto will be gone.
However, you need to handle this intelligently since you need to identify if any fields in the form have changed and only then warn the user to confirm his decision to go away from this page.
You can do this by having a flag which is initialized to false but when onBeforeUnload event is fired, you would check if any of the form fields in the page have changed by iterating over each and every form field,and then setting the flag to true if some thing changed
the onBeforeUnload Handler will always return this flag, if it is true, you will get this confirmation popup, else the page will go away. To show a customized confirmation dialog, perhaps you would have to invoke the custom dialog call from with in the onBeforeUnload handler. When the user says yes, return false;else true.

Date changes with iphoto 6

When I send photos from my Samsung D900 to my Mac (via bluetooth) the date info does not seem to come with it. Instead the file is dated as per the date of import onto my computer. When I then put this into iphoto the date changes again to 01/01/06. I know I can manually change the date back again in iphoto for individual photos or batches but this is tiresome. Any ideas?

Crossie:
Have you tried importing via cable to see if the wireless has anything to do with it? The capture date as assigned by the camera should be recognized. If the file gets copied from one media to another sometimes the modified or created date will be used. Trying a cable can either rule out the bluetooth aspect or confirm that that's the culprit.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users are experiencing I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

How to stop automatic date changes when opening an old document?

I use Pages to create my invoices. The problem I'm having is this: when there is a question about an invoice and I need to reopen it the date changes from the original date (which I need) to today's date. I understand why it does this, and I want it to do this when I create the thing, but is there a way to keep it from happening from saved documents?
As a follow up question: it must be very simple to find the date the document was created. Could someone please tell me where to find this?
Thanks in advance

You likely put a date stamp on your invoice via the menu hiearchy, Insert > Date & Time. Highlight the date string, then from a right-mouse button menu, choose Edit Date & Time... You will see another pop-up that gives you some control over your newly inserted Date & Time.

Data change Initiated reason code Issue

Hi guru:
When I tried to finished saving the sales order and completed enter these incompleted fields,the system popped up the window and asked me to enter the data change initiated reason code,but I used f4 to look for the code and found there is no value in it,how to populate it so as to close this window?

Hi:
I don't know what you meant,this message window contains as below:
Data change initiated reason code : need to populate but there is no value to enter via press F4
material: 11
Line item 10
Sched line:1
enter ---> this is press button
Have you seen this before?

Inform users on unsaved data when switching between/starting new TaskFlows?

Hi
In our case, we are using the multiTaskFlow concept to dynamically start new TaskFlows in Tabs. The simple requirement is to have a generic way to inform users on modified unsaved data when switching or starting new TaskFlow
I did research in google for answers, but did not found anything working.
For example, I added following checks (df=dirtyFlag) just before switching between Tabs and Menu-items:
boolean df1 = am.getApplicationModuleDef().isDirty();
boolean df2 = ControllerContext.getInstance().getCurrentRootViewPort().isDataDirty();
boolean df3 = ControllerContext.getInstance().getCurrentViewPort().isDataDirty();
boolean df4 = AdfFacesContext.getCurrentInstance().getDirtyPageHandler().isDataDirty();
boolean df5 = am.getTransaction().isDirty();
boolean df6 = am.getDBTransaction().isDirty();
boolean df7 = bindingContext.getDefaultDataControl().isTransactionDirty();
boolean df8 = dcBindingContainer.getDataControl().isTransactionModified();
boolean df9 = dcBindingContainer.getDataControl().isTransactionDirty();
Start Application and perform a TAB switch without searching or changing anything
df1 true
df2 false
df3 false
df4 false
df5 false
df6 false
df7 false
df8 false
df9 false
Within a TaskFlow I perform a SEARCH and perform a TAB switch, flags change to following:
df1 true
df2 true
df3 true
df4 true
df5 true
df6 true
df7 false
df8 false
df9 false
I MODIFY values within TF and perform a TAB switch, flags remain same and regardless what I do, they remain so:
df1 true
df2 true
df3 true
df4 true
df5 true
df6 true
df7 false
df8 false
df9 false
Do you know a working approach?
Thanks in advance!

Hi,
its for when you leave a view, not when you switch task flows in a page. To get back to your question, one thing you forgot to mention is what data control state is it that the task flows have: shared or isolated? If they have a shared state then only a single transaction is on and you should be able to tell the dirty state by calling
boolean df2 = ControllerContext.getInstance().getCurrentRootViewPort().isDataDirty();
However, if the task flow is in isolated mode then you will need to get a handle to the data control frame used by that task flow.
BindingContext ctx = oracle.adf.controller.binding.BindingUtils.getBindingContext();
String frameName = ctx.getCurrentDataControlFrame();
DataControlFrame frame = ctx.findDataControlFrame(frameName);
boolean isDirty = frame.isTransactionDirty();
//see: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/adf/model/DataControlFrame.htmlHowever, this information is only available from within the task flow, which means to check this from the outside you need to provide a mechanism to get to this information (contextual events would be an option. You define a contextual event receiver on the task flows that when called checks the current transaction state and then "fires" the answer back to the caller, which then obtains a map of task flow transaction states to check before navigating away or switching task flows.
Frank
Edited by: Frank Nimphius on Apr 11, 2013 2:48 PM

Can not see the option Execution with Data Change in the infoprovider?

Hi team,
i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
i can not see the option "Execution with Data Change in the infoprovider",
i can only see 2 options
Direct scheduling in background process
create new scheduling
periodic,
is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
kindly assist

Hi Blusky ,
check the below given link.
http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
Regards,
Rohit Garg

How can I recover from a Botched BATCH DATE CHANGE in iPhoto?

Botched Batch Date Change iPhoto08
Short Story: Intending to change the date for one photo I managed to change the dates for all 8,525 images in my iPhoto08 library to the SAME DATE!! I found that the original creation dates were saved in the in the Modified field that appears in the Photo Info Window / File metadata subsection. I would like some help figuring out how to set the Date Created to this File Modified Date that appears in the Photo Info Window.
GORY DETAILS:
I used iPhoto08/ Photos menu / BATCH CHANGE... /“Set DATE to 20100723 1:20:54 PM” with “Modify original files” checked. iPhoto changed all 8,525 images to the same date.
I now realize I should have used Photos menu / Adjust Date and Time ... But the damage was already done. Unfortunately there was no Edit menu / Undo for this operation. ALL 8,525 images have the same date. I checked in the the iPhoto Information sidebar--same date all images.
Next, as a test, I dragged an image to the desktop and opened it in Graphic Converter7.0.3. The same date “20100723 1:20:54 PM” appeared in the Image Browser List /”Date Created”, “Date Modified”, “Date Captured” metadata fields.
The following appeared in the Graphic Converter
Image Preview sidebar (subWindow) going left to right
Image menu/button
Date and Time: Friday, July 23, 2010 1:20:54 PM PT
Exif menu/button
File date and time: 2010:07:23 13:20:54
Date and time of original data generation: 2010:07:23 13:20:54
Unknown tag (36868): 2010:07:23 13:20:54 <- significant?
ExifTool menu/button
ExifTool Version Number:8.40
Warning: [minor] Suspicious MakerNotes offset for tag 0x9001
----System----
File Modification Date/Time: 2010:07:23 13:20:54-07:00
----IFDO----
Modify Date: 2010:07:23 13:20:54
----ExifIFD----
Date/Time Original: 2010:07:23 13:20:54
Create Date: 2010:07:23 13:20:54
<<<<<<OH MY GOD >>>>>> the BATCH CHANGE / SET DATE not only RESET the date for EVERY IMAGE in my library, it also changed the date metadata EVERYWHERE inside each individual image file.
Actually it's my Mom and Dad's iPhoto library containing all the kids and grand kids pictures, family trips, important events, everything. There is no backup. I feel as if I have tipped over a file cabinet containing all our photos. Our “date and event” organized 8,525 image iPhoto library was now as useful as a giant shoebox. On second thought, a shoe box full of real photo prints would be more useful than my iPhoto library because the prints would have the print date stamped on them.
At this point feeling desperate I closed my eyes and said a quick prayer to Saint Rita - Patron Saint of the Impossible.
I returned to iPhoto .................and noticed the Show Photo Info MENU item in the Photo Menu.
I selected it.
And Low and behold,
in the Photo Info WINDOW,
under the Meta data File SUBSECTION, the correct photo creation date appeared -->" Modified: 20071002 05:46:07 PM" I checked different photos ... They all had different FILE MODIFIED dates. These dates were/are the old creation dates! My prayers were answered: THANK YOU SAINT RITA!
But now I am really stumped! This File Modified Date seems to be some kind of external metadata that is indexed or keyed to each image. How is this metadata stored in the iPhoto library? How can I access this File Modified date? I now turn to you GREAT iPhoto WIZARDS. Pray tell, how can I set the “Creation Date to the file Modified Date” that appears in the Photo Info Window as a (scriptable?) batch process.
I am on my knees for this one...please help. we have iphoto11 but afraid to upgrade to it. until i know more i don't want to loose this Modified Date metadata.

thanks for the quick response...
no simple solution because no backup to restore from
iPhoto seems to be using file metadata as some sort of index key in the
Photo Info Window. open up the iphoto library package and take a look at
the .xml file -- ModDate is used everywhere. hoping to export this data and merge/join it to
each image.
still trying to figure it out.
thanks,
Tom

Open Transactions in ECC for Master Data changes in MDM

Hi All,
I have a basic Design question on how to handle the impact of Data changes in MDM for any open transactions with that Master object. For eg if we have a Material set up in MDM and in ECC and there are open Purchase Orders for that Material, now if the Base Unit of Measure is changed in MDM and gets harmonized to ECC(After Workflow approval of the Change) how will it impact the PO attached to the material . Can we do any configuration in ECC that will restrict any Open PO s not to take the new changed value and any new POs taking up the new Base Unit of Measure , or can we set up an alert/notification that will trigger for a PO whenever any Master Data is changed and the PO takes the new changed value on the fly . What will be the best approach from a solution point of view .
Thanks ,
Prabuddha

Hi Prabuddha,
In ECC if a change happens to a master data not all the changes are reflected automatically in the open documents like open PO or open Sales order. Some fields values have to be redetermined for eg: "pricing procedure", some of them needs to be changed manually for eg: "Description". Moreover specific to your eg of Base unit of measure, this is a sensitive field and has lot of impact on the process so there for changing such fields it is necessary to close all the open documents against the Master data record in consideration. This fact is regardless whether the change happens through an IDoc or directly by MM02/XK02/XD02
Prabudha, Please revert if you have further questions.
Best Regards
P T Manoj
Edited by: PT MANOJ on Sep 2, 2011 10:25 PM

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

My computer crashed. How do I sync with a new computer without losing unsaved data?

My computer crashed. How do I sync with a new computer without losing unsaved data?

Downloading past purchases from the App Store, iBookstore, and iTunes Store
For items you cannot get the above way use a third-party utility such as Phone to PC

EPCF Workprotect Pop up Unsaved Data Changes

Similar Messages

Maybe you are looking for