Epson NX515 cancelling operations after 10.5.8 Update

I applied the latest 10.5.8 security update recently and now my Epson NX515 will not communicate with my laptop. I've reset the printing system and reinstalled the latest drivers several times. The laptop can see the printer when connected via WiFi and USB. When I try to print the printer will start up and prepare to print, but then it will either hang indefinitely with the power light blinking to signal incoming data (on WiFi connection) or immediately cancel the operations (on USB connection).
Any help is appreciated.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Similar Messages

My iPhone 4S is not preforming any network related operations after 5.0.1 update - please help!

My iPhone 4S is not preforming any network related (Calls, Messages) operations after 5.0.1 update - please help!

5.0.2 has not been released, thus you can not upgrade.
Stedman

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Can MacBook with Leopard OS do two-sided printing on the Epson NX515?

I am looking to buy an all in one printer, and the Epson NX515 seems best in a number of respects, especially the fact that its ink cartridges come in separate colors, which leads to much less waste of ink. But there is one item in the Epson documentation that concerns me ... the fact that two-sided printing may not be supported by Mac. Does anyone know if the Mac Book A1181 with Leopard OS does or does not support two-sided printing?
Thank you.

Hi @Blazer5,
Welcome to the HP Forums!
I see that you are wondering how to setup two-sided printing with your HP Envy 5532. I am happy to help!
To setup the duplex printing, I would recommend to go through this guide, Printing on Both Sides of the Paper (Duplex) for HP ENVY 5530 e-All-in-One and Deskjet Ink Advantage..., as it has instructions for both Windows and Mac. Also here are some guidelines for you to follow:
Understanding the following items can help you avoid possible problems when printing on both sides of the page.
Do not print on both sides of the following types of paper, or jams might occur:
Transparencies
Envelopes
Photo paper
Glossy paper
Paper lighter than 60 g/m2 (16 lb).
Paper heavier than 105 g/m2 (28 lb).
Several kinds of paper require a specific orientation when you print on both sides of a page. These include letterheads, preprinted paper, and paper with watermarks and pre-punched holes. The printer prints the first side of the paper first. Load the paper with top edge first and the print side down.
Also, this post, Vista / Win 7 Duplex Printing Troubleshooting Guide, by @Bob_Headrick. Might have some answers for you as well.
In the print dialog box (after selecting File, and Print), you will see a box next to two-sided printing, that can be checked or un-checked, in order to toggle in-between the two functions.
To change the print quality, you will want to go through this guide, HP ENVY 5530 e-All-in-One series and HP Deskjet Ink Advantage 4510 e-All-in-One series - Print Docum....
For future reference, here is your printer's user guide.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

While i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

while i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

First of all, start your Mac with the Alt key pressed until the boot manager apears. If your keyboard is wireless probably you should press the power button at the same time you start the Mac.
After, go to Bootcamp Assistant and remove the windows partition and do all the process again.
Remember to remove all the USB/Firewire/Thunderbolt devices that are attached to the Mac during the windows installation.
Once windows boots for first time, install windows support software with all the drivers.
IMPORTANT: If the windows partition doesn't boot correctly (Black screen with white blinking cursos at the left top corner) do this steps to boot windows:
1- Start the Windows Installation DVD at system start.
2- Click on Repair System, not install.
3- Select Command Prompt
4- Run these 3 commands: (Press enter for each command)
     Bootrec.exe /FixMbr
     Bootrec.exe /FixBoot
      Bootrec.exe /RebuildBcd
5- Exit command line (type exit)
6- Click on Restart button.
7- Boot the Mac and you will see that It automaticaly loads windows
Tell us how it goes!!
PS: Sorry for my bad english!!!

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

Unable to open PDF's "User Cancelled Operation"

Since Adobe Reader updated to XI, I have been unable to open any PDF files on my computer. Every time I try to open a PDF file or open Adobe Reader from the start menu it takes forever to load the program and before it finishes loading i get an error screen "User cancelled operation" I hit OK it closes the program.
I'm Using Windows 7
I have tried uninstalling and reinstalling, I have tried all the other options that I can, that I have found in the forums

Hi Orkward84
Can you please provide the following details:
1. Are you able to launch just the Reader from Start menu->All programs? If yes, can you please try opening a pdf from File->Open menu. What happens, do you get the same error or the file opens?
2. Can you please share a sample pdf file that you are facing issue with
3. Since when did you start facing this issue ? When did you update your Reader to version XI?
Regards,
Rohit

After updating to Mavericks the apps store gives me the message "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." How do I still update my apps??

After updating to Mavericks the apps store gives me the message "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." How do I still update apps such as iphoto??

What happened was you never accepted these apps into your Mac App Store account.
Drag & drop the apps in the Trash and use OS X Recovery to install them again. after installing the apps be sure to accept them into your account this time from the Purchases pane of the Mac App Store.
OS X Recovery -
http://support.apple.com/kb/HT4718

Query on cancel operation on adf:table

Hi,
We are developing an ADF-BC project using JDeveloper 11g.
I have an query on the industry standard for implementing the 'Cancel' operation.
In my application,all the pages have an adf:table with CRUDimplemenations on it.
In a scenario where I do add row/edit row'delete row,what is the standard procedure
for implementing the 'Cancel' operation.
Is it sufficient if I call viewobject.executeQuery() in my backing bean[will it produce performance problem]
or is there any other ways of achieving it.
Please suggest/advice.
Thanks,
Praveen

Hi,
Better have all the methods for add, cancel, delete,edit and all in the Model layer(viewObject Level /Application module impl level), expose it to the client interface.
Drag and drop the method in view Layer part. and Excute it through operation binding in bean
reg,
Bakkia.

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Mac Mail won't print to Epson NX515

Mac Mail won't print to Epson NX515 - It worked fin until the last few days - contacted Epson and reinstalled drivers. Can print from Safari, Photoshop, Acrobat Pro, etc just not Mac Mail.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Slow operations after installing Mavericks

Slow operations after installing Mavericks. How can this be changed to faster operations?

jlgapple,
whenever a new version of OS X is installed, Spotlight will spend some time reïndexing the boot disk to update its metadata on the updated files in OS X. If Spotlight has finished its reïndexing, have you ensured that all of your third-party apps, plug-ins, kernel extensions, &c. are compatible with Mavericks?

Epson PictureMate Shows "Stopped" After Last Java and Security Updates

Hi,
After installing the following updates ("Final Cut Pro Update" (5.1.3), "Java for Mac OS X 10.4, Release 5" (5.0), "Security Update 2007-002 (PowerPC)" (1.0), "Security Update 2007-001" (1.0) and "Daylight Saving Time Update" (1.0)). My Epson PictureMate started showing the dreaded "Printer Stopped" issue noted y many other on many other printers.
I've tried the Printer Setup Utility "reset printing system", removing and adding back the printer etc. The Epson Photo 820 still works fine. The PictureMate will also work fine from any other account. The account I'm using it in is not an admin acocunt, but a Standard account. The other family accounts can also use the printer, so the issue is local to my 1 main user.
I've downloaded and tried the "PSR" utility from www.fixamac.com. The utility doesn't find anything wrong, but it does complain about CUPS permissions (as did Apple's Disk Utility). I'm thinking the resetting of the printer system deletes a number of directories and when they are recreated they seem to come back with permissions the system (and PSR) doesn't like. Both utilities repair and don't find the issues again, but no joy on the printing.
I've also dumped the preferences with no change.
Since other users can print fine, I'm assuming CUPS and the printer drivers are OK. Any idea what other secret files in my User folder could be messed up and affecting the single printer?
Thanks in advance.
Sean
PowerMac G5 Dual 2.0, 2.5GB RAM, 10.4.8 Mac OS X (10.4.8)

There are a LOT of Java based exploits, so even 3.6.11 isn't fully patched, there are cross-platform exploits, and bots running wild.
Did you also remove your cache folders?
Firefox: I use 4.0 betas, NoScript I feel is a must.
From MacIntouch:
Security software vendors warn of an active, Java-based Trojan Horse that affects Mac users. Disabling Java in your web brower is a highly-recommended counter-measure. Also flushing DNS cache.
http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-trunk/
Adobe, Oracle, Nvidia.... but actually leaving it to users to get the latest Java on their own is the same as what happens with Windows.
Mozilla group urged its users to immediately:
Disable JavaScript in Firefox.
Using NoScript Add-on.
http://www.zdnet.com/blog/security/firefox-zero-day-under-attack-at-nobel-prize- site/7550

Epson NX515 cancelling operations after 10.5.8 Update

Similar Messages

Maybe you are looking for